All of lore.kernel.org
 help / color / mirror / Atom feed
From: Maxim Levitsky <maximlevitsky@gmail.com>
To: lirc-list@lists.sourceforge.net
Cc: Jarod Wilson <jarod@wilsonet.com>,
	linux-input@vger.kernel.org, linux-media@vger.kernel.org,
	Mauro Carvalho Chehab <mchehab@redhat.com>,
	Christoph Bartelmus <lirc@bartelmus.de>,
	Maxim Levitsky <maximlevitsky@gmail.com>
Subject: [PATCH 09/13] IR: add helper function for hardware with small o/b buffer.
Date: Fri, 30 Jul 2010 14:38:49 +0300	[thread overview]
Message-ID: <1280489933-20865-10-git-send-email-maximlevitsky@gmail.com> (raw)
In-Reply-To: <1280489933-20865-1-git-send-email-maximlevitsky@gmail.com>

Some ir input devices have small buffer, and interrupt the host
each time it is full (or half full)

Add a helper that automaticly handles timeouts, and also
automaticly merges samples of same time (space-space)
Such samples might be placed by hardware because size of
sample in the buffer is small (a byte for example).

Also remove constness from ir_dev_props, because it now contains timeout
settings that driver might want to change

Signed-off-by: Maxim Levitsky <maximlevitsky@gmail.com>
---
 drivers/media/IR/ir-core-priv.h |    1 +
 drivers/media/IR/ir-keytable.c  |    2 +-
 drivers/media/IR/ir-raw-event.c |   84 +++++++++++++++++++++++++++++++++++++++
 include/media/ir-core.h         |   23 +++++++++-
 4 files changed, 106 insertions(+), 4 deletions(-)

diff --git a/drivers/media/IR/ir-core-priv.h b/drivers/media/IR/ir-core-priv.h
index e9c3cce..30ff52c 100644
--- a/drivers/media/IR/ir-core-priv.h
+++ b/drivers/media/IR/ir-core-priv.h
@@ -41,6 +41,7 @@ struct ir_raw_event_ctrl {
 
 	/* raw decoder state follows */
 	struct ir_raw_event prev_ev;
+	struct ir_raw_event this_ev;
 	struct nec_dec {
 		int state;
 		unsigned count;
diff --git a/drivers/media/IR/ir-keytable.c b/drivers/media/IR/ir-keytable.c
index 94a8577..34b9c07 100644
--- a/drivers/media/IR/ir-keytable.c
+++ b/drivers/media/IR/ir-keytable.c
@@ -428,7 +428,7 @@ static void ir_close(struct input_dev *input_dev)
  */
 int __ir_input_register(struct input_dev *input_dev,
 		      const struct ir_scancode_table *rc_tab,
-		      const struct ir_dev_props *props,
+		      struct ir_dev_props *props,
 		      const char *driver_name)
 {
 	struct ir_input_dev *ir_dev;
diff --git a/drivers/media/IR/ir-raw-event.c b/drivers/media/IR/ir-raw-event.c
index d0c18db..43094e7 100644
--- a/drivers/media/IR/ir-raw-event.c
+++ b/drivers/media/IR/ir-raw-event.c
@@ -140,6 +140,90 @@ int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type typ
 EXPORT_SYMBOL_GPL(ir_raw_event_store_edge);
 
 /**
+ * ir_raw_event_store_with_filter() - pass next pulse/space to decoders with some processing
+ * @input_dev:	the struct input_dev device descriptor
+ * @type:	the type of the event that has occurred
+ *
+ * This routine (which may be called from an interrupt context) works
+ * in similiar manner to ir_raw_event_store_edge.
+ * This routine is intended for devices with limited internal buffer
+ * It automerges samples of same type, and handles timeouts
+ */
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+						struct ir_raw_event *ev)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	struct ir_raw_event_ctrl *raw = ir->raw;
+
+	if (!raw || !ir->props)
+		return -EINVAL;
+
+	/* Ignore spaces in idle mode */
+	if (ir->idle && !ev->pulse)
+		return 0;
+	else if (ir->idle)
+		ir_raw_event_set_idle(input_dev, 0);
+
+	if (!raw->this_ev.duration) {
+		raw->this_ev = *ev;
+	} else if (ev->pulse == raw->this_ev.pulse) {
+		raw->this_ev.duration += ev->duration;
+	} else {
+		ir_raw_event_store(input_dev, &raw->this_ev);
+		raw->this_ev = *ev;
+	}
+
+	/* Enter idle mode if nessesary */
+	if (!ev->pulse && ir->props->timeout &&
+		raw->this_ev.duration >= ir->props->timeout)
+		ir_raw_event_set_idle(input_dev, 1);
+	return 0;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_store_with_filter);
+
+void ir_raw_event_set_idle(struct input_dev *input_dev, int idle)
+{
+	struct ir_input_dev *ir = input_get_drvdata(input_dev);
+	struct ir_raw_event_ctrl *raw = ir->raw;
+	ktime_t now;
+	u64 delta;
+
+	if (!ir->props)
+		return;
+
+	if (!ir->raw)
+		goto out;
+
+	if (idle) {
+		IR_dprintk(2, "enter idle mode\n");
+		raw->last_event = ktime_get();
+	} else {
+		IR_dprintk(2, "exit idle mode\n");
+
+		now = ktime_get();
+		delta = ktime_to_ns(ktime_sub(now, ir->raw->last_event));
+
+		WARN_ON(raw->this_ev.pulse);
+
+		raw->this_ev.duration =
+			min(raw->this_ev.duration + delta,
+						(u64)IR_MAX_DURATION);
+
+		ir_raw_event_store(input_dev, &raw->this_ev);
+
+		if (raw->this_ev.duration == IR_MAX_DURATION)
+			ir_raw_event_reset(input_dev);
+
+		raw->this_ev.duration = 0;
+	}
+out:
+	if (ir->props->s_idle)
+		ir->props->s_idle(ir->props->priv, idle);
+	ir->idle = idle;
+}
+EXPORT_SYMBOL_GPL(ir_raw_event_set_idle);
+
+/**
  * ir_raw_event_handle() - schedules the decoding of stored ir data
  * @input_dev:	the struct input_dev device descriptor
  *
diff --git a/include/media/ir-core.h b/include/media/ir-core.h
index 197d05a..7ad39fe 100644
--- a/include/media/ir-core.h
+++ b/include/media/ir-core.h
@@ -41,6 +41,9 @@ enum rc_driver_type {
  *	anything with it. Yet, as the same keycode table can be used with other
  *	devices, a mask is provided to allow its usage. Drivers should generally
  *	leave this field in blank
+ * @timeout: optional time after which device stops sending data
+ * @min_timeout: minimum timeout supported by device
+ * @max_timeout: maximum timeout supported by device
  * @priv: driver-specific data, to be used on the callbacks
  * @change_protocol: allow changing the protocol used on hardware decoders
  * @open: callback to allow drivers to enable polling/irq when IR input device
@@ -50,11 +53,19 @@ enum rc_driver_type {
  * @s_tx_mask: set transmitter mask (for devices with multiple tx outputs)
  * @s_tx_carrier: set transmit carrier frequency
  * @tx_ir: transmit IR
+ * @s_idle: optional: enable/disable hardware idle mode, upon which,
+ *	device doesn't interrupt host untill it sees IR data
  */
 struct ir_dev_props {
 	enum rc_driver_type	driver_type;
 	unsigned long		allowed_protos;
 	u32			scanmask;
+
+	u64			timeout;
+	u64			min_timeout;
+	u64			max_timeout;
+
+
 	void			*priv;
 	int			(*change_protocol)(void *priv, u64 ir_type);
 	int			(*open)(void *priv);
@@ -62,6 +73,7 @@ struct ir_dev_props {
 	int			(*s_tx_mask)(void *priv, u32 mask);
 	int			(*s_tx_carrier)(void *priv, u32 carrier);
 	int			(*tx_ir)(void *priv, int *txbuf, u32 n);
+	void			(*s_idle)(void *priv, int enable);
 };
 
 struct ir_input_dev {
@@ -69,9 +81,10 @@ struct ir_input_dev {
 	char				*driver_name;	/* Name of the driver module */
 	struct ir_scancode_table	rc_tab;		/* scan/key table */
 	unsigned long			devno;		/* device number */
-	const struct ir_dev_props	*props;		/* Device properties */
+	struct ir_dev_props		*props;		/* Device properties */
 	struct ir_raw_event_ctrl	*raw;		/* for raw pulse/space events */
 	struct input_dev		*input_dev;	/* the input device associated with this device */
+	bool				idle;
 
 	/* key info - needed by IR keycode handlers */
 	spinlock_t			keylock;	/* protects the below members */
@@ -95,12 +108,12 @@ enum raw_event_type {
 /* From ir-keytable.c */
 int __ir_input_register(struct input_dev *dev,
 		      const struct ir_scancode_table *ir_codes,
-		      const struct ir_dev_props *props,
+		      struct ir_dev_props *props,
 		      const char *driver_name);
 
 static inline int ir_input_register(struct input_dev *dev,
 		      const char *map_name,
-		      const struct ir_dev_props *props,
+		      struct ir_dev_props *props,
 		      const char *driver_name) {
 	struct ir_scancode_table *ir_codes;
 	struct ir_input_dev *ir_dev;
@@ -148,6 +161,10 @@ struct ir_raw_event {
 void ir_raw_event_handle(struct input_dev *input_dev);
 int ir_raw_event_store(struct input_dev *input_dev, struct ir_raw_event *ev);
 int ir_raw_event_store_edge(struct input_dev *input_dev, enum raw_event_type type);
+int ir_raw_event_store_with_filter(struct input_dev *input_dev,
+				struct ir_raw_event *ev);
+void ir_raw_event_set_idle(struct input_dev *input_dev, int idle);
+
 static inline void ir_raw_event_reset(struct input_dev *input_dev)
 {
 	struct ir_raw_event ev = { .pulse = false, .duration = 0 };
-- 
1.7.0.4


  parent reply	other threads:[~2010-07-30 11:39 UTC|newest]

Thread overview: 29+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-07-30 11:38 [PATCH 0/9 v3] IR: few fixes, additions and ENE driver Maxim Levitsky
2010-07-30 11:38 ` [PATCH 01/13] IR: Kconfig fixes Maxim Levitsky
2010-07-30 11:38 ` [PATCH 02/13] IR: minor fixes: Maxim Levitsky
2010-07-30 11:38 ` [PATCH 03/13] IR: replace spinlock with mutex Maxim Levitsky
2010-07-30 11:38 ` [PATCH 04/13] IR: fix locking in ir_raw_event_work Maxim Levitsky
2010-07-30 11:38 ` [PATCH 05/13] IR: JVC: make repeat work Maxim Levitsky
2010-07-30 11:38 ` [PATCH 06/13] IR: nec decoder: fix repeat Maxim Levitsky
2010-07-30 19:36   ` Mauro Carvalho Chehab
2010-07-30 19:54     ` Maxim Levitsky
2010-07-30 11:38 ` [PATCH 07/13] IR: NECX: support repeat Maxim Levitsky
2010-07-30 11:38 ` [PATCH 08/13] IR: Allow not to compile keymaps in Maxim Levitsky
2010-07-30 11:38 ` Maxim Levitsky [this message]
2010-07-30 11:38 ` [PATCH 10/13] IR: extend interfaces to support more device settings LIRC: add new IOCTL that enables learning mode (wide band receiver) Maxim Levitsky
2010-07-30 21:22   ` Christoph Bartelmus
2010-07-30 21:22     ` Christoph Bartelmus
2010-07-30 22:01     ` Maxim Levitsky
2010-07-31  8:10       ` Christoph Bartelmus
2010-07-31  8:10         ` Christoph Bartelmus
2010-07-31  9:35         ` Maxim Levitsky
2010-07-30 11:38 ` [PATCH 11/13] IR: report unknown scancodes the in-kernel decoders found Maxim Levitsky
2010-07-30 11:38 ` [PATCH 12/13] STAGING: remove lirc_ene0100 driver Maxim Levitsky
2010-07-30 11:38 ` [PATCH 13/13] IR: Port ene driver to new IR subsystem and enable it Maxim Levitsky
2010-07-30 19:33 ` [PATCH 0/9 v3] IR: few fixes, additions and ENE driver Mauro Carvalho Chehab
2010-07-30 19:52   ` Maxim Levitsky
  -- strict thread matches above, loose matches on Subject: below --
2010-07-31 14:59 [PATCH 0/9 v4] " Maxim Levitsky
2010-07-31 14:59 ` [PATCH 09/13] IR: add helper function for hardware with small o/b buffer Maxim Levitsky
2010-08-02  2:11   ` Andy Walls
2010-08-02 10:49     ` Maxim Levitsky
2010-08-02 15:54     ` Jarod Wilson
2010-07-30  2:17 [PATCH 0/9 v2] IR: few fixes, additions and ENE driver Maxim Levitsky
2010-07-30  2:17 ` [PATCH 09/13] IR: add helper function for hardware with small o/b buffer Maxim Levitsky

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1280489933-20865-10-git-send-email-maximlevitsky@gmail.com \
    --to=maximlevitsky@gmail.com \
    --cc=jarod@wilsonet.com \
    --cc=linux-input@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=lirc-list@lists.sourceforge.net \
    --cc=lirc@bartelmus.de \
    --cc=mchehab@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.