All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stefan Roese <sr@denx.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [PATCH] MTD: Cleanup jffs2/mtdpart headers
Date: Thu, 12 Aug 2010 13:43:37 +0200	[thread overview]
Message-ID: <1281613417-19585-1-git-send-email-sr@denx.de> (raw)

This patch moves some MTD related defines and prototypes from a jffs2
header to an MTD header. This makes it possible to remove this jffs2
header inclusion from some files without jffs2 relevance.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Alexander Stein <alexander.stein@systec-electronic.com>
---
 board/sixnet/sixnet.c        |    1 -
 common/cmd_flash.c           |   11 +---------
 common/cmd_jffs2.c           |    2 +-
 common/cmd_nand.c            |   10 ---------
 drivers/mtd/nand/nand_base.c |    4 ---
 include/jffs2/jffs2.h        |    1 +
 include/jffs2/load_kernel.h  |   43 -----------------------------------------
 include/linux/mtd/mtd.h      |   44 ++++++++++++++++++++++++++++++++++++++++++
 8 files changed, 47 insertions(+), 69 deletions(-)

diff --git a/board/sixnet/sixnet.c b/board/sixnet/sixnet.c
index edb5d13..b30c01b 100644
--- a/board/sixnet/sixnet.c
+++ b/board/sixnet/sixnet.c
@@ -24,7 +24,6 @@
 
 #include <common.h>
 #include <config.h>
-#include <jffs2/jffs2.h>
 #include <mpc8xx.h>
 #include <net.h>	/* for eth_init() */
 #include <rtc.h>
diff --git a/common/cmd_flash.c b/common/cmd_flash.c
index 3e6bab2..abb4a57 100644
--- a/common/cmd_flash.c
+++ b/common/cmd_flash.c
@@ -26,21 +26,12 @@
  */
 #include <common.h>
 #include <command.h>
+#include <linux/mtd/mtd.h>
 
 #ifdef CONFIG_HAS_DATAFLASH
 #include <dataflash.h>
 #endif
 
-#if defined(CONFIG_CMD_MTDPARTS)
-#include <jffs2/jffs2.h>
-
-/* partition handling routines */
-int mtdparts_init(void);
-int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num);
-int find_dev_and_part(const char *id, struct mtd_device **dev,
-		u8 *part_num, struct part_info **part);
-#endif
-
 #ifndef CONFIG_SYS_NO_FLASH
 extern flash_info_t flash_info[];	/* info for FLASH chips */
 
diff --git a/common/cmd_jffs2.c b/common/cmd_jffs2.c
index 0e7a6b0..b599cc7 100644
--- a/common/cmd_jffs2.c
+++ b/common/cmd_jffs2.c
@@ -215,7 +215,7 @@ static int mtd_device_validate(u8 type, u8 num, u32 *size)
  * @param dev_num parsed device number (output)
  * @return 0 on success, 1 otherwise
  */
-static int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num)
+int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num)
 {
 	const char *p = id;
 
diff --git a/common/cmd_nand.c b/common/cmd_nand.c
index 3f1d077..7e861f6 100644
--- a/common/cmd_nand.c
+++ b/common/cmd_nand.c
@@ -18,18 +18,8 @@
 #include <watchdog.h>
 #include <malloc.h>
 #include <asm/byteorder.h>
-#include <jffs2/jffs2.h>
 #include <nand.h>
 
-#if defined(CONFIG_CMD_MTDPARTS)
-
-/* partition handling routines */
-int mtdparts_init(void);
-int id_parse(const char *id, const char **ret_id, u8 *dev_type, u8 *dev_num);
-int find_dev_and_part(const char *id, struct mtd_device **dev,
-		      u8 *part_num, struct part_info **part);
-#endif
-
 static int nand_dump(nand_info_t *nand, ulong off, int only_oob)
 {
 	int i;
diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
index ed1c9c9..d60059c 100644
--- a/drivers/mtd/nand/nand_base.c
+++ b/drivers/mtd/nand/nand_base.c
@@ -75,10 +75,6 @@
 #include <asm/io.h>
 #include <asm/errno.h>
 
-#ifdef CONFIG_JFFS2_NAND
-#include <jffs2/jffs2.h>
-#endif
-
 /*
  * CONFIG_SYS_NAND_RESET_CNT is used as a timeout mechanism when resetting
  * a flash.  NAND flash is initialized prior to interrupts so standard timers
diff --git a/include/jffs2/jffs2.h b/include/jffs2/jffs2.h
index 651f94c..1a7b50e 100644
--- a/include/jffs2/jffs2.h
+++ b/include/jffs2/jffs2.h
@@ -39,6 +39,7 @@
 #define __LINUX_JFFS2_H__
 
 #include <asm/types.h>
+#include <linux/mtd/mtd.h>
 #include <jffs2/load_kernel.h>
 
 #define JFFS2_SUPER_MAGIC 0x72b6
diff --git a/include/jffs2/load_kernel.h b/include/jffs2/load_kernel.h
index 906eb3d..ccae2f1 100644
--- a/include/jffs2/load_kernel.h
+++ b/include/jffs2/load_kernel.h
@@ -25,43 +25,6 @@
  *
  */
 
-#include <linux/list.h>
-
-/* mtd device types */
-#define MTD_DEV_TYPE_NOR	0x0001
-#define MTD_DEV_TYPE_NAND	0x0002
-#define MTD_DEV_TYPE_ONENAND	0x0004
-
-#define MTD_DEV_TYPE(type) ((type == MTD_DEV_TYPE_NAND) ? "nand" :	\
-			(type == MTD_DEV_TYPE_ONENAND) ? "onenand" : "nor")
-
-struct mtd_device {
-	struct list_head link;
-	struct mtdids *id;		/* parent mtd id entry */
-	u16 num_parts;			/* number of partitions on this device */
-	struct list_head parts;		/* partitions */
-};
-
-struct part_info {
-	struct list_head link;
-	char *name;			/* partition name */
-	u8 auto_name;			/* set to 1 for generated name */
-	u32 size;			/* total size of the partition */
-	u32 offset;			/* offset within device */
-	void *jffs2_priv;		/* used internaly by jffs2 */
-	u32 mask_flags;			/* kernel MTD mask flags */
-	u32 sector_size;		/* size of sector */
-	struct mtd_device *dev;		/* parent device */
-};
-
-struct mtdids {
-	struct list_head link;
-	u8 type;			/* device type */
-	u8 num;				/* device number */
-	u32 size;			/* device size */
-	char *mtd_id;			/* linux kernel device id */
-};
-
 #define ldr_strlen	strlen
 #define ldr_strncmp	strncmp
 #define ldr_memcpy	memcpy
@@ -74,10 +37,4 @@ struct mtdids {
 #define putLabeledWord(x, y)	printf("%s %08x\n", x, (unsigned int)y)
 #define led_blink(x, y, z, a)
 
-/* common/cmd_jffs2.c */
-extern int mtdparts_init(void);
-extern int find_dev_and_part(const char *id, struct mtd_device **dev,
-				u8 *part_num, struct part_info **part);
-extern struct mtd_device *device_find(u8 type, u8 num);
-
 #endif /* load_kernel_h */
diff --git a/include/linux/mtd/mtd.h b/include/linux/mtd/mtd.h
index 16556c4..c65f18d 100644
--- a/include/linux/mtd/mtd.h
+++ b/include/linux/mtd/mtd.h
@@ -9,6 +9,7 @@
 
 #include <linux/types.h>
 #include <div64.h>
+#include <linux/list.h>
 #include <linux/mtd/mtd-abi.h>
 
 #define MTD_CHAR_MAJOR 90
@@ -23,6 +24,41 @@
 
 #define MTD_FAIL_ADDR_UNKNOWN	-1LL
 
+/* U-Boot mtd device types */
+#define MTD_DEV_TYPE_NOR	0x0001
+#define MTD_DEV_TYPE_NAND	0x0002
+#define MTD_DEV_TYPE_ONENAND	0x0004
+
+#define MTD_DEV_TYPE(type) ((type == MTD_DEV_TYPE_NAND) ? "nand" :	\
+			(type == MTD_DEV_TYPE_ONENAND) ? "onenand" : "nor")
+
+struct mtd_device {
+	struct list_head link;
+	struct mtdids *id;		/* parent mtd id entry */
+	u16 num_parts;			/* number of partitions on this device */
+	struct list_head parts;		/* partitions */
+};
+
+struct part_info {
+	struct list_head link;
+	char *name;			/* partition name */
+	u8 auto_name;			/* set to 1 for generated name */
+	u32 size;			/* total size of the partition */
+	u32 offset;			/* offset within device */
+	void *jffs2_priv;		/* used internaly by jffs2 */
+	u32 mask_flags;			/* kernel MTD mask flags */
+	u32 sector_size;		/* size of sector */
+	struct mtd_device *dev;		/* parent device */
+};
+
+struct mtdids {
+	struct list_head link;
+	u8 type;			/* device type */
+	u8 num;				/* device number */
+	u32 size;			/* device size */
+	char *mtd_id;			/* linux kernel device id */
+};
+
 /*
  * Enumeration for NAND/OneNAND flash chip state
  */
@@ -260,6 +296,14 @@ extern struct mtd_info *get_mtd_device_nm(const char *name);
 
 extern void put_mtd_device(struct mtd_info *mtd);
 
+/* U-Boot mtdparts stuff */
+extern int mtdparts_init(void);
+extern int find_dev_and_part(const char *id, struct mtd_device **dev,
+				u8 *part_num, struct part_info **part);
+extern struct mtd_device *device_find(u8 type, u8 num);
+extern int mtd_id_parse(const char *id, const char **ret_id, u8 *dev_type,
+			u8 *dev_num);
+
 /* XXX U-BOOT XXX */
 #if 0
 struct mtd_notifier {
-- 
1.7.2.1

             reply	other threads:[~2010-08-12 11:43 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-12 11:43 Stefan Roese [this message]
2010-08-12 11:52 ` [U-Boot] [PATCH] MTD: Cleanup jffs2/mtdpart headers Rogan Dawes

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1281613417-19585-1-git-send-email-sr@denx.de \
    --to=sr@denx.de \
    --cc=u-boot@lists.denx.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.