From: Tejun Heo <tj@kernel.org>
To: jaxboe@fusionio.com, linux-kernel@vger.kernel.org,
linux-fsdevel@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-ide@vger.kernel.org, linux-raid@vger.kernel.org,
dm-devel@redhat.co
Cc: Tejun Heo <tj@kernel.org>, Christoph Hellwig <hch@infradead.org>,
Nick Piggin <npiggin@kernel.dk>,
Jeremy Fitzhardinge <jeremy@xensource.com>,
Chris Wright <chrisw@sous-sol.org>,
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>,
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>,
"David S. Miller" <davem@davemloft.net>,
Alasdair G Kergon <agk@redhat.com>,
Pierre Ossman <drzeus@drzeus.cx>,
Stefan Weinhuber <wein@de.ibm.com>
Subject: [PATCH 04/41] block: deprecate barrier and replace blk_queue_ordered() with blk_queue_flush()
Date: Fri, 3 Sep 2010 12:29:19 +0200 [thread overview]
Message-ID: <1283509796-1510-5-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1283509796-1510-1-git-send-email-tj@kernel.org>
Barrier is deemed too heavy and will soon be replaced by FLUSH/FUA
requests. Deprecate barrier. All REQ_HARDBARRIERs are failed with
-EOPNOTSUPP and blk_queue_ordered() is replaced with simpler
blk_queue_flush().
blk_queue_flush() takes combinations of REQ_FLUSH and FUA. If a
device has write cache and can flush it, it should set REQ_FLUSH. If
the device can handle FUA writes, it should also set REQ_FUA.
All blk_queue_ordered() users are converted.
* ORDERED_DRAIN is mapped to 0 which is the default value.
* ORDERED_DRAIN_FLUSH is mapped to REQ_FLUSH.
* ORDERED_DRAIN_FLUSH_FUA is mapped to REQ_FLUSH | REQ_FUA.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: Stefan Weinhuber <wein@de.ibm.com>
---
block/blk-barrier.c | 29 ----------------------------
block/blk-core.c | 6 +++-
block/blk-settings.c | 20 +++++++++++++++++++
drivers/block/brd.c | 1 -
drivers/block/loop.c | 2 +-
drivers/block/osdblk.c | 2 +-
drivers/block/ps3disk.c | 2 +-
drivers/block/virtio_blk.c | 25 ++++++++---------------
drivers/block/xen-blkfront.c | 43 +++++++++++------------------------------
drivers/ide/ide-disk.c | 13 +++++------
drivers/md/dm.c | 2 +-
drivers/mmc/card/queue.c | 1 -
drivers/s390/block/dasd.c | 1 -
drivers/scsi/sd.c | 16 +++++++-------
include/linux/blkdev.h | 6 +++-
15 files changed, 67 insertions(+), 102 deletions(-)
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index c807e9c..ed0aba5 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -9,35 +9,6 @@
#include "blk.h"
-/**
- * blk_queue_ordered - does this queue support ordered writes
- * @q: the request queue
- * @ordered: one of QUEUE_ORDERED_*
- *
- * Description:
- * For journalled file systems, doing ordered writes on a commit
- * block instead of explicitly doing wait_on_buffer (which is bad
- * for performance) can be a big win. Block drivers supporting this
- * feature should call this function and indicate so.
- *
- **/
-int blk_queue_ordered(struct request_queue *q, unsigned ordered)
-{
- if (ordered != QUEUE_ORDERED_NONE &&
- ordered != QUEUE_ORDERED_DRAIN &&
- ordered != QUEUE_ORDERED_DRAIN_FLUSH &&
- ordered != QUEUE_ORDERED_DRAIN_FUA) {
- printk(KERN_ERR "blk_queue_ordered: bad value %d\n", ordered);
- return -EINVAL;
- }
-
- q->ordered = ordered;
- q->next_ordered = ordered;
-
- return 0;
-}
-EXPORT_SYMBOL(blk_queue_ordered);
-
/*
* Cache flushing for ordered writes handling
*/
diff --git a/block/blk-core.c b/block/blk-core.c
index ee1a1e7..f063541 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1203,11 +1203,13 @@ static int __make_request(struct request_queue *q, struct bio *bio)
const unsigned int ff = bio->bi_rw & REQ_FAILFAST_MASK;
int rw_flags;
- if ((bio->bi_rw & REQ_HARDBARRIER) &&
- (q->next_ordered == QUEUE_ORDERED_NONE)) {
+ /* REQ_HARDBARRIER is no more */
+ if (WARN_ONCE(bio->bi_rw & REQ_HARDBARRIER,
+ "block: HARDBARRIER is deprecated, use FLUSH/FUA instead\n")) {
bio_endio(bio, -EOPNOTSUPP);
return 0;
}
+
/*
* low level driver can indicate that it wants pages above a
* certain limit bounced to low memory (ie for highmem, or even
diff --git a/block/blk-settings.c b/block/blk-settings.c
index a234f4b..9b18afc 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -794,6 +794,26 @@ void blk_queue_update_dma_alignment(struct request_queue *q, int mask)
}
EXPORT_SYMBOL(blk_queue_update_dma_alignment);
+/**
+ * blk_queue_flush - configure queue's cache flush capability
+ * @q: the request queue for the device
+ * @flush: 0, REQ_FLUSH or REQ_FLUSH | REQ_FUA
+ *
+ * Tell block layer cache flush capability of @q. If it supports
+ * flushing, REQ_FLUSH should be set. If it supports bypassing
+ * write cache for individual writes, REQ_FUA should be set.
+ */
+void blk_queue_flush(struct request_queue *q, unsigned int flush)
+{
+ WARN_ON_ONCE(flush & ~(REQ_FLUSH | REQ_FUA));
+
+ if (WARN_ON_ONCE(!(flush & REQ_FLUSH) && (flush & REQ_FUA)))
+ flush &= ~REQ_FUA;
+
+ q->flush_flags = flush & (REQ_FLUSH | REQ_FUA);
+}
+EXPORT_SYMBOL_GPL(blk_queue_flush);
+
static int __init blk_settings_init(void)
{
blk_max_low_pfn = max_low_pfn - 1;
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 47a4127..fa33f97 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -482,7 +482,6 @@ static struct brd_device *brd_alloc(int i)
if (!brd->brd_queue)
goto out_free_dev;
blk_queue_make_request(brd->brd_queue, brd_make_request);
- blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_DRAIN);
blk_queue_max_hw_sectors(brd->brd_queue, 1024);
blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY);
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index c3a4a2e..953d1e1 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -832,7 +832,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
lo->lo_queue->unplug_fn = loop_unplug;
if (!(lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync)
- blk_queue_ordered(lo->lo_queue, QUEUE_ORDERED_DRAIN_FLUSH);
+ blk_queue_flush(lo->lo_queue, REQ_FLUSH);
set_capacity(lo->lo_disk, size);
bd_set_size(bdev, size << 9);
diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c
index 2284b4f..72d6246 100644
--- a/drivers/block/osdblk.c
+++ b/drivers/block/osdblk.c
@@ -439,7 +439,7 @@ static int osdblk_init_disk(struct osdblk_device *osdev)
blk_queue_stack_limits(q, osd_request_queue(osdev->osd));
blk_queue_prep_rq(q, blk_queue_start_tag);
- blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH);
+ blk_queue_flush(q, REQ_FLUSH);
disk->queue = q;
diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c
index e9da874..4911f9e 100644
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -468,7 +468,7 @@ static int __devinit ps3disk_probe(struct ps3_system_bus_device *_dev)
blk_queue_dma_alignment(queue, dev->blk_size-1);
blk_queue_logical_block_size(queue, dev->blk_size);
- blk_queue_ordered(queue, QUEUE_ORDERED_DRAIN_FLUSH);
+ blk_queue_flush(queue, REQ_FLUSH);
blk_queue_max_segments(queue, -1);
blk_queue_max_segment_size(queue, dev->bounce_size);
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 7965280..d10b635 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -388,22 +388,15 @@ static int __devinit virtblk_probe(struct virtio_device *vdev)
vblk->disk->driverfs_dev = &vdev->dev;
index++;
- if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH)) {
- /*
- * If the FLUSH feature is supported we do have support for
- * flushing a volatile write cache on the host. Use that
- * to implement write barrier support.
- */
- blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH);
- } else {
- /*
- * If the FLUSH feature is not supported we must assume that
- * the host does not perform any kind of volatile write
- * caching. We still need to drain the queue to provider
- * proper barrier semantics.
- */
- blk_queue_ordered(q, QUEUE_ORDERED_DRAIN);
- }
+ /*
+ * If the FLUSH feature is supported we do have support for
+ * flushing a volatile write cache on the host. Use that to
+ * implement write barrier support; otherwise, we must assume
+ * that the host does not perform any kind of volatile write
+ * caching.
+ */
+ if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH))
+ blk_queue_flush(q, REQ_FLUSH);
/* If disk is read-only in the host, the guest should obey */
if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO))
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 8341862..f2ffc46 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -95,7 +95,7 @@ struct blkfront_info
struct gnttab_free_callback callback;
struct blk_shadow shadow[BLK_RING_SIZE];
unsigned long shadow_free;
- int feature_barrier;
+ unsigned int feature_flush;
int is_ready;
};
@@ -418,25 +418,12 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size)
}
-static int xlvbd_barrier(struct blkfront_info *info)
+static void xlvbd_flush(struct blkfront_info *info)
{
- int err;
- const char *barrier;
-
- switch (info->feature_barrier) {
- case QUEUE_ORDERED_DRAIN: barrier = "enabled"; break;
- case QUEUE_ORDERED_NONE: barrier = "disabled"; break;
- default: return -EINVAL;
- }
-
- err = blk_queue_ordered(info->rq, info->feature_barrier);
-
- if (err)
- return err;
-
+ blk_queue_flush(info->rq, info->feature_flush);
printk(KERN_INFO "blkfront: %s: barriers %s\n",
- info->gd->disk_name, barrier);
- return 0;
+ info->gd->disk_name,
+ info->feature_flush ? "enabled" : "disabled");
}
@@ -515,7 +502,7 @@ static int xlvbd_alloc_gendisk(blkif_sector_t capacity,
info->rq = gd->queue;
info->gd = gd;
- xlvbd_barrier(info);
+ xlvbd_flush(info);
if (vdisk_info & VDISK_READONLY)
set_disk_ro(gd, 1);
@@ -661,8 +648,8 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
printk(KERN_WARNING "blkfront: %s: write barrier op failed\n",
info->gd->disk_name);
error = -EOPNOTSUPP;
- info->feature_barrier = QUEUE_ORDERED_NONE;
- xlvbd_barrier(info);
+ info->feature_flush = 0;
+ xlvbd_flush(info);
}
/* fall through */
case BLKIF_OP_READ:
@@ -1075,19 +1062,13 @@ static void blkfront_connect(struct blkfront_info *info)
/*
* If there's no "feature-barrier" defined, then it means
* we're dealing with a very old backend which writes
- * synchronously; draining will do what needs to get done.
+ * synchronously; nothing to do.
*
* If there are barriers, then we use flush.
- *
- * If barriers are not supported, then there's no much we can
- * do, so just set ordering to NONE.
*/
- if (err)
- info->feature_barrier = QUEUE_ORDERED_DRAIN;
- else if (barrier)
- info->feature_barrier = QUEUE_ORDERED_DRAIN_FLUSH;
- else
- info->feature_barrier = QUEUE_ORDERED_NONE;
+ info->feature_flush = 0;
+ if (!err && barrier)
+ info->feature_flush = REQ_FLUSH;
err = xlvbd_alloc_gendisk(sectors, info, binfo, sector_size);
if (err) {
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 7433e07..7c5b01c 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -516,10 +516,10 @@ static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect)
return ide_no_data_taskfile(drive, &cmd);
}
-static void update_ordered(ide_drive_t *drive)
+static void update_flush(ide_drive_t *drive)
{
u16 *id = drive->id;
- unsigned ordered = QUEUE_ORDERED_NONE;
+ unsigned flush = 0;
if (drive->dev_flags & IDE_DFLAG_WCACHE) {
unsigned long long capacity;
@@ -543,13 +543,12 @@ static void update_ordered(ide_drive_t *drive)
drive->name, barrier ? "" : "not ");
if (barrier) {
- ordered = QUEUE_ORDERED_DRAIN_FLUSH;
+ flush = REQ_FLUSH;
blk_queue_prep_rq(drive->queue, idedisk_prep_fn);
}
- } else
- ordered = QUEUE_ORDERED_DRAIN;
+ }
- blk_queue_ordered(drive->queue, ordered);
+ blk_queue_flush(drive->queue, flush);
}
ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE);
@@ -572,7 +571,7 @@ static int set_wcache(ide_drive_t *drive, int arg)
}
}
- update_ordered(drive);
+ update_flush(drive);
return err;
}
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index ac384b2..b1d92be 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2245,7 +2245,7 @@ static int dm_init_request_based_queue(struct mapped_device *md)
blk_queue_softirq_done(md->queue, dm_softirq_done);
blk_queue_prep_rq(md->queue, dm_prep_fn);
blk_queue_lld_busy(md->queue, dm_lld_busy);
- blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN_FLUSH);
+ blk_queue_flush(md->queue, REQ_FLUSH);
elv_register_queue(md->queue);
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index e876678..9c0b42b 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -128,7 +128,6 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
mq->req = NULL;
blk_queue_prep_rq(mq->queue, mmc_prep_request);
- blk_queue_ordered(mq->queue, QUEUE_ORDERED_DRAIN);
queue_flag_set_unlocked(QUEUE_FLAG_NONROT, mq->queue);
if (mmc_can_erase(card)) {
queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mq->queue);
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 8373ca0..9b106d8 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -2197,7 +2197,6 @@ static void dasd_setup_queue(struct dasd_block *block)
*/
blk_queue_max_segment_size(block->request_queue, PAGE_SIZE);
blk_queue_segment_boundary(block->request_queue, PAGE_SIZE - 1);
- blk_queue_ordered(block->request_queue, QUEUE_ORDERED_DRAIN);
}
/*
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index cdfc51a..63bd01a 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2109,7 +2109,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
struct scsi_disk *sdkp = scsi_disk(disk);
struct scsi_device *sdp = sdkp->device;
unsigned char *buffer;
- unsigned ordered;
+ unsigned flush = 0;
SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
"sd_revalidate_disk\n"));
@@ -2151,15 +2151,15 @@ static int sd_revalidate_disk(struct gendisk *disk)
/*
* We now have all cache related info, determine how we deal
- * with ordered requests.
+ * with flush requests.
*/
- if (sdkp->WCE)
- ordered = sdkp->DPOFUA
- ? QUEUE_ORDERED_DRAIN_FUA : QUEUE_ORDERED_DRAIN_FLUSH;
- else
- ordered = QUEUE_ORDERED_DRAIN;
+ if (sdkp->WCE) {
+ flush |= REQ_FLUSH;
+ if (sdkp->DPOFUA)
+ flush |= REQ_FUA;
+ }
- blk_queue_ordered(sdkp->disk->queue, ordered);
+ blk_queue_flush(sdkp->disk->queue, flush);
set_capacity(disk, sdkp->capacity);
kfree(buffer);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 7077bc0..e97911d 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -355,8 +355,10 @@ struct request_queue
struct blk_trace *blk_trace;
#endif
/*
- * reserved for flush operations
+ * for flush operations
*/
+ unsigned int flush_flags;
+
unsigned int ordered, next_ordered, ordseq;
int orderr, ordcolor;
struct request pre_flush_rq, bar_rq, post_flush_rq;
@@ -865,8 +867,8 @@ extern void blk_queue_update_dma_alignment(struct request_queue *, int);
extern void blk_queue_softirq_done(struct request_queue *, softirq_done_fn *);
extern void blk_queue_rq_timed_out(struct request_queue *, rq_timed_out_fn *);
extern void blk_queue_rq_timeout(struct request_queue *, unsigned int);
+extern void blk_queue_flush(struct request_queue *q, unsigned int flush);
extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev);
-extern int blk_queue_ordered(struct request_queue *, unsigned);
extern bool blk_do_ordered(struct request_queue *, struct request **);
extern unsigned blk_ordered_cur_seq(struct request_queue *);
extern unsigned blk_ordered_req_seq(struct request *);
--
1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: Tejun Heo <tj@kernel.org>
To: jaxboe@fusionio.com, linux-kernel@vger.kernel.org,
linux-fsdevel@vger.kernel.org, linux-scsi@vger.kernel.org,
linux-ide@vger.kernel.org, linux-raid@vger.kernel.org,
dm-devel@redhat.com, hch@lst.de, konishi.ryusuke@lab.ntt.co.jp,
James.Bottomley@suse.de, tytso@mit.edu, chris.mason@oracle.com,
swhiteho@redhat.com, vst@vlnb.net, jack@suse.cz,
rwheeler@redhat.com, hare@suse.de, neilb@suse.de,
rusty@rustcorp.com.au, mst@redhat.com, snitzer@redhat.com,
k-ueda@ct.jp.nec.com, mpatocka@redhat.com
Cc: Tejun Heo <tj@kernel.org>, Christoph Hellwig <hch@infradead.org>,
Nick Piggin <npiggin@kernel.dk>,
Jeremy Fitzhardinge <jeremy@xensource.com>,
Chris Wright <chrisw@sous-sol.org>,
FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>,
Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>,
"David S. Miller" <davem@davemloft.net>,
Alasdair G Kergon <agk@redhat.com>,
Pierre Ossman <drzeus@drzeus.cx>,
Stefan Weinhuber <wein@de.ibm.com>
Subject: [PATCH 04/41] block: deprecate barrier and replace blk_queue_ordered() with blk_queue_flush()
Date: Fri, 3 Sep 2010 12:29:19 +0200 [thread overview]
Message-ID: <1283509796-1510-5-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1283509796-1510-1-git-send-email-tj@kernel.org>
Barrier is deemed too heavy and will soon be replaced by FLUSH/FUA
requests. Deprecate barrier. All REQ_HARDBARRIERs are failed with
-EOPNOTSUPP and blk_queue_ordered() is replaced with simpler
blk_queue_flush().
blk_queue_flush() takes combinations of REQ_FLUSH and FUA. If a
device has write cache and can flush it, it should set REQ_FLUSH. If
the device can handle FUA writes, it should also set REQ_FUA.
All blk_queue_ordered() users are converted.
* ORDERED_DRAIN is mapped to 0 which is the default value.
* ORDERED_DRAIN_FLUSH is mapped to REQ_FLUSH.
* ORDERED_DRAIN_FLUSH_FUA is mapped to REQ_FLUSH | REQ_FUA.
Signed-off-by: Tejun Heo <tj@kernel.org>
Acked-by: Boaz Harrosh <bharrosh@panasas.com>
Cc: Christoph Hellwig <hch@infradead.org>
Cc: Nick Piggin <npiggin@kernel.dk>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Jeremy Fitzhardinge <jeremy@xensource.com>
Cc: Chris Wright <chrisw@sous-sol.org>
Cc: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Alasdair G Kergon <agk@redhat.com>
Cc: Pierre Ossman <drzeus@drzeus.cx>
Cc: Stefan Weinhuber <wein@de.ibm.com>
---
block/blk-barrier.c | 29 ----------------------------
block/blk-core.c | 6 +++-
block/blk-settings.c | 20 +++++++++++++++++++
drivers/block/brd.c | 1 -
drivers/block/loop.c | 2 +-
drivers/block/osdblk.c | 2 +-
drivers/block/ps3disk.c | 2 +-
drivers/block/virtio_blk.c | 25 ++++++++---------------
drivers/block/xen-blkfront.c | 43 +++++++++++------------------------------
drivers/ide/ide-disk.c | 13 +++++------
drivers/md/dm.c | 2 +-
drivers/mmc/card/queue.c | 1 -
drivers/s390/block/dasd.c | 1 -
drivers/scsi/sd.c | 16 +++++++-------
include/linux/blkdev.h | 6 +++-
15 files changed, 67 insertions(+), 102 deletions(-)
diff --git a/block/blk-barrier.c b/block/blk-barrier.c
index c807e9c..ed0aba5 100644
--- a/block/blk-barrier.c
+++ b/block/blk-barrier.c
@@ -9,35 +9,6 @@
#include "blk.h"
-/**
- * blk_queue_ordered - does this queue support ordered writes
- * @q: the request queue
- * @ordered: one of QUEUE_ORDERED_*
- *
- * Description:
- * For journalled file systems, doing ordered writes on a commit
- * block instead of explicitly doing wait_on_buffer (which is bad
- * for performance) can be a big win. Block drivers supporting this
- * feature should call this function and indicate so.
- *
- **/
-int blk_queue_ordered(struct request_queue *q, unsigned ordered)
-{
- if (ordered != QUEUE_ORDERED_NONE &&
- ordered != QUEUE_ORDERED_DRAIN &&
- ordered != QUEUE_ORDERED_DRAIN_FLUSH &&
- ordered != QUEUE_ORDERED_DRAIN_FUA) {
- printk(KERN_ERR "blk_queue_ordered: bad value %d\n", ordered);
- return -EINVAL;
- }
-
- q->ordered = ordered;
- q->next_ordered = ordered;
-
- return 0;
-}
-EXPORT_SYMBOL(blk_queue_ordered);
-
/*
* Cache flushing for ordered writes handling
*/
diff --git a/block/blk-core.c b/block/blk-core.c
index ee1a1e7..f063541 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1203,11 +1203,13 @@ static int __make_request(struct request_queue *q, struct bio *bio)
const unsigned int ff = bio->bi_rw & REQ_FAILFAST_MASK;
int rw_flags;
- if ((bio->bi_rw & REQ_HARDBARRIER) &&
- (q->next_ordered == QUEUE_ORDERED_NONE)) {
+ /* REQ_HARDBARRIER is no more */
+ if (WARN_ONCE(bio->bi_rw & REQ_HARDBARRIER,
+ "block: HARDBARRIER is deprecated, use FLUSH/FUA instead\n")) {
bio_endio(bio, -EOPNOTSUPP);
return 0;
}
+
/*
* low level driver can indicate that it wants pages above a
* certain limit bounced to low memory (ie for highmem, or even
diff --git a/block/blk-settings.c b/block/blk-settings.c
index a234f4b..9b18afc 100644
--- a/block/blk-settings.c
+++ b/block/blk-settings.c
@@ -794,6 +794,26 @@ void blk_queue_update_dma_alignment(struct request_queue *q, int mask)
}
EXPORT_SYMBOL(blk_queue_update_dma_alignment);
+/**
+ * blk_queue_flush - configure queue's cache flush capability
+ * @q: the request queue for the device
+ * @flush: 0, REQ_FLUSH or REQ_FLUSH | REQ_FUA
+ *
+ * Tell block layer cache flush capability of @q. If it supports
+ * flushing, REQ_FLUSH should be set. If it supports bypassing
+ * write cache for individual writes, REQ_FUA should be set.
+ */
+void blk_queue_flush(struct request_queue *q, unsigned int flush)
+{
+ WARN_ON_ONCE(flush & ~(REQ_FLUSH | REQ_FUA));
+
+ if (WARN_ON_ONCE(!(flush & REQ_FLUSH) && (flush & REQ_FUA)))
+ flush &= ~REQ_FUA;
+
+ q->flush_flags = flush & (REQ_FLUSH | REQ_FUA);
+}
+EXPORT_SYMBOL_GPL(blk_queue_flush);
+
static int __init blk_settings_init(void)
{
blk_max_low_pfn = max_low_pfn - 1;
diff --git a/drivers/block/brd.c b/drivers/block/brd.c
index 47a4127..fa33f97 100644
--- a/drivers/block/brd.c
+++ b/drivers/block/brd.c
@@ -482,7 +482,6 @@ static struct brd_device *brd_alloc(int i)
if (!brd->brd_queue)
goto out_free_dev;
blk_queue_make_request(brd->brd_queue, brd_make_request);
- blk_queue_ordered(brd->brd_queue, QUEUE_ORDERED_DRAIN);
blk_queue_max_hw_sectors(brd->brd_queue, 1024);
blk_queue_bounce_limit(brd->brd_queue, BLK_BOUNCE_ANY);
diff --git a/drivers/block/loop.c b/drivers/block/loop.c
index c3a4a2e..953d1e1 100644
--- a/drivers/block/loop.c
+++ b/drivers/block/loop.c
@@ -832,7 +832,7 @@ static int loop_set_fd(struct loop_device *lo, fmode_t mode,
lo->lo_queue->unplug_fn = loop_unplug;
if (!(lo_flags & LO_FLAGS_READ_ONLY) && file->f_op->fsync)
- blk_queue_ordered(lo->lo_queue, QUEUE_ORDERED_DRAIN_FLUSH);
+ blk_queue_flush(lo->lo_queue, REQ_FLUSH);
set_capacity(lo->lo_disk, size);
bd_set_size(bdev, size << 9);
diff --git a/drivers/block/osdblk.c b/drivers/block/osdblk.c
index 2284b4f..72d6246 100644
--- a/drivers/block/osdblk.c
+++ b/drivers/block/osdblk.c
@@ -439,7 +439,7 @@ static int osdblk_init_disk(struct osdblk_device *osdev)
blk_queue_stack_limits(q, osd_request_queue(osdev->osd));
blk_queue_prep_rq(q, blk_queue_start_tag);
- blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH);
+ blk_queue_flush(q, REQ_FLUSH);
disk->queue = q;
diff --git a/drivers/block/ps3disk.c b/drivers/block/ps3disk.c
index e9da874..4911f9e 100644
--- a/drivers/block/ps3disk.c
+++ b/drivers/block/ps3disk.c
@@ -468,7 +468,7 @@ static int __devinit ps3disk_probe(struct ps3_system_bus_device *_dev)
blk_queue_dma_alignment(queue, dev->blk_size-1);
blk_queue_logical_block_size(queue, dev->blk_size);
- blk_queue_ordered(queue, QUEUE_ORDERED_DRAIN_FLUSH);
+ blk_queue_flush(queue, REQ_FLUSH);
blk_queue_max_segments(queue, -1);
blk_queue_max_segment_size(queue, dev->bounce_size);
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index 7965280..d10b635 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -388,22 +388,15 @@ static int __devinit virtblk_probe(struct virtio_device *vdev)
vblk->disk->driverfs_dev = &vdev->dev;
index++;
- if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH)) {
- /*
- * If the FLUSH feature is supported we do have support for
- * flushing a volatile write cache on the host. Use that
- * to implement write barrier support.
- */
- blk_queue_ordered(q, QUEUE_ORDERED_DRAIN_FLUSH);
- } else {
- /*
- * If the FLUSH feature is not supported we must assume that
- * the host does not perform any kind of volatile write
- * caching. We still need to drain the queue to provider
- * proper barrier semantics.
- */
- blk_queue_ordered(q, QUEUE_ORDERED_DRAIN);
- }
+ /*
+ * If the FLUSH feature is supported we do have support for
+ * flushing a volatile write cache on the host. Use that to
+ * implement write barrier support; otherwise, we must assume
+ * that the host does not perform any kind of volatile write
+ * caching.
+ */
+ if (virtio_has_feature(vdev, VIRTIO_BLK_F_FLUSH))
+ blk_queue_flush(q, REQ_FLUSH);
/* If disk is read-only in the host, the guest should obey */
if (virtio_has_feature(vdev, VIRTIO_BLK_F_RO))
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 8341862..f2ffc46 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -95,7 +95,7 @@ struct blkfront_info
struct gnttab_free_callback callback;
struct blk_shadow shadow[BLK_RING_SIZE];
unsigned long shadow_free;
- int feature_barrier;
+ unsigned int feature_flush;
int is_ready;
};
@@ -418,25 +418,12 @@ static int xlvbd_init_blk_queue(struct gendisk *gd, u16 sector_size)
}
-static int xlvbd_barrier(struct blkfront_info *info)
+static void xlvbd_flush(struct blkfront_info *info)
{
- int err;
- const char *barrier;
-
- switch (info->feature_barrier) {
- case QUEUE_ORDERED_DRAIN: barrier = "enabled"; break;
- case QUEUE_ORDERED_NONE: barrier = "disabled"; break;
- default: return -EINVAL;
- }
-
- err = blk_queue_ordered(info->rq, info->feature_barrier);
-
- if (err)
- return err;
-
+ blk_queue_flush(info->rq, info->feature_flush);
printk(KERN_INFO "blkfront: %s: barriers %s\n",
- info->gd->disk_name, barrier);
- return 0;
+ info->gd->disk_name,
+ info->feature_flush ? "enabled" : "disabled");
}
@@ -515,7 +502,7 @@ static int xlvbd_alloc_gendisk(blkif_sector_t capacity,
info->rq = gd->queue;
info->gd = gd;
- xlvbd_barrier(info);
+ xlvbd_flush(info);
if (vdisk_info & VDISK_READONLY)
set_disk_ro(gd, 1);
@@ -661,8 +648,8 @@ static irqreturn_t blkif_interrupt(int irq, void *dev_id)
printk(KERN_WARNING "blkfront: %s: write barrier op failed\n",
info->gd->disk_name);
error = -EOPNOTSUPP;
- info->feature_barrier = QUEUE_ORDERED_NONE;
- xlvbd_barrier(info);
+ info->feature_flush = 0;
+ xlvbd_flush(info);
}
/* fall through */
case BLKIF_OP_READ:
@@ -1075,19 +1062,13 @@ static void blkfront_connect(struct blkfront_info *info)
/*
* If there's no "feature-barrier" defined, then it means
* we're dealing with a very old backend which writes
- * synchronously; draining will do what needs to get done.
+ * synchronously; nothing to do.
*
* If there are barriers, then we use flush.
- *
- * If barriers are not supported, then there's no much we can
- * do, so just set ordering to NONE.
*/
- if (err)
- info->feature_barrier = QUEUE_ORDERED_DRAIN;
- else if (barrier)
- info->feature_barrier = QUEUE_ORDERED_DRAIN_FLUSH;
- else
- info->feature_barrier = QUEUE_ORDERED_NONE;
+ info->feature_flush = 0;
+ if (!err && barrier)
+ info->feature_flush = REQ_FLUSH;
err = xlvbd_alloc_gendisk(sectors, info, binfo, sector_size);
if (err) {
diff --git a/drivers/ide/ide-disk.c b/drivers/ide/ide-disk.c
index 7433e07..7c5b01c 100644
--- a/drivers/ide/ide-disk.c
+++ b/drivers/ide/ide-disk.c
@@ -516,10 +516,10 @@ static int ide_do_setfeature(ide_drive_t *drive, u8 feature, u8 nsect)
return ide_no_data_taskfile(drive, &cmd);
}
-static void update_ordered(ide_drive_t *drive)
+static void update_flush(ide_drive_t *drive)
{
u16 *id = drive->id;
- unsigned ordered = QUEUE_ORDERED_NONE;
+ unsigned flush = 0;
if (drive->dev_flags & IDE_DFLAG_WCACHE) {
unsigned long long capacity;
@@ -543,13 +543,12 @@ static void update_ordered(ide_drive_t *drive)
drive->name, barrier ? "" : "not ");
if (barrier) {
- ordered = QUEUE_ORDERED_DRAIN_FLUSH;
+ flush = REQ_FLUSH;
blk_queue_prep_rq(drive->queue, idedisk_prep_fn);
}
- } else
- ordered = QUEUE_ORDERED_DRAIN;
+ }
- blk_queue_ordered(drive->queue, ordered);
+ blk_queue_flush(drive->queue, flush);
}
ide_devset_get_flag(wcache, IDE_DFLAG_WCACHE);
@@ -572,7 +571,7 @@ static int set_wcache(ide_drive_t *drive, int arg)
}
}
- update_ordered(drive);
+ update_flush(drive);
return err;
}
diff --git a/drivers/md/dm.c b/drivers/md/dm.c
index ac384b2..b1d92be 100644
--- a/drivers/md/dm.c
+++ b/drivers/md/dm.c
@@ -2245,7 +2245,7 @@ static int dm_init_request_based_queue(struct mapped_device *md)
blk_queue_softirq_done(md->queue, dm_softirq_done);
blk_queue_prep_rq(md->queue, dm_prep_fn);
blk_queue_lld_busy(md->queue, dm_lld_busy);
- blk_queue_ordered(md->queue, QUEUE_ORDERED_DRAIN_FLUSH);
+ blk_queue_flush(md->queue, REQ_FLUSH);
elv_register_queue(md->queue);
diff --git a/drivers/mmc/card/queue.c b/drivers/mmc/card/queue.c
index e876678..9c0b42b 100644
--- a/drivers/mmc/card/queue.c
+++ b/drivers/mmc/card/queue.c
@@ -128,7 +128,6 @@ int mmc_init_queue(struct mmc_queue *mq, struct mmc_card *card, spinlock_t *lock
mq->req = NULL;
blk_queue_prep_rq(mq->queue, mmc_prep_request);
- blk_queue_ordered(mq->queue, QUEUE_ORDERED_DRAIN);
queue_flag_set_unlocked(QUEUE_FLAG_NONROT, mq->queue);
if (mmc_can_erase(card)) {
queue_flag_set_unlocked(QUEUE_FLAG_DISCARD, mq->queue);
diff --git a/drivers/s390/block/dasd.c b/drivers/s390/block/dasd.c
index 8373ca0..9b106d8 100644
--- a/drivers/s390/block/dasd.c
+++ b/drivers/s390/block/dasd.c
@@ -2197,7 +2197,6 @@ static void dasd_setup_queue(struct dasd_block *block)
*/
blk_queue_max_segment_size(block->request_queue, PAGE_SIZE);
blk_queue_segment_boundary(block->request_queue, PAGE_SIZE - 1);
- blk_queue_ordered(block->request_queue, QUEUE_ORDERED_DRAIN);
}
/*
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index cdfc51a..63bd01a 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -2109,7 +2109,7 @@ static int sd_revalidate_disk(struct gendisk *disk)
struct scsi_disk *sdkp = scsi_disk(disk);
struct scsi_device *sdp = sdkp->device;
unsigned char *buffer;
- unsigned ordered;
+ unsigned flush = 0;
SCSI_LOG_HLQUEUE(3, sd_printk(KERN_INFO, sdkp,
"sd_revalidate_disk\n"));
@@ -2151,15 +2151,15 @@ static int sd_revalidate_disk(struct gendisk *disk)
/*
* We now have all cache related info, determine how we deal
- * with ordered requests.
+ * with flush requests.
*/
- if (sdkp->WCE)
- ordered = sdkp->DPOFUA
- ? QUEUE_ORDERED_DRAIN_FUA : QUEUE_ORDERED_DRAIN_FLUSH;
- else
- ordered = QUEUE_ORDERED_DRAIN;
+ if (sdkp->WCE) {
+ flush |= REQ_FLUSH;
+ if (sdkp->DPOFUA)
+ flush |= REQ_FUA;
+ }
- blk_queue_ordered(sdkp->disk->queue, ordered);
+ blk_queue_flush(sdkp->disk->queue, flush);
set_capacity(disk, sdkp->capacity);
kfree(buffer);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 7077bc0..e97911d 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -355,8 +355,10 @@ struct request_queue
struct blk_trace *blk_trace;
#endif
/*
- * reserved for flush operations
+ * for flush operations
*/
+ unsigned int flush_flags;
+
unsigned int ordered, next_ordered, ordseq;
int orderr, ordcolor;
struct request pre_flush_rq, bar_rq, post_flush_rq;
@@ -865,8 +867,8 @@ extern void blk_queue_update_dma_alignment(struct request_queue *, int);
extern void blk_queue_softirq_done(struct request_queue *, softirq_done_fn *);
extern void blk_queue_rq_timed_out(struct request_queue *, rq_timed_out_fn *);
extern void blk_queue_rq_timeout(struct request_queue *, unsigned int);
+extern void blk_queue_flush(struct request_queue *q, unsigned int flush);
extern struct backing_dev_info *blk_get_backing_dev_info(struct block_device *bdev);
-extern int blk_queue_ordered(struct request_queue *, unsigned);
extern bool blk_do_ordered(struct request_queue *, struct request **);
extern unsigned blk_ordered_cur_seq(struct request_queue *);
extern unsigned blk_ordered_req_seq(struct request *);
--
1.7.1
next prev parent reply other threads:[~2010-09-03 10:29 UTC|newest]
Thread overview: 159+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-03 10:29 [PATCHSET #upstream] block, fs: replace HARDBARRIER with FLUSH/FUA, take#2 Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 01/41] ide: remove unnecessary blk_queue_flushing() test in do_ide_request() Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 02/41] block/loop: queue ordered mode should be DRAIN_FLUSH Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-12 8:38 ` Tao Ma
2010-09-12 11:41 ` Tejun Heo
2010-09-12 11:55 ` Tao Ma
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 03/41] block: kill QUEUE_ORDERED_BY_TAG Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo [this message]
2010-09-03 10:29 ` [PATCH 04/41] block: deprecate barrier and replace blk_queue_ordered() with blk_queue_flush() Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 05/41] block: remove spurious uses of REQ_HARDBARRIER Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 06/41] block: misc cleanups in barrier code Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 07/41] block: drop barrier ordering by queue draining Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 08/41] block: rename blk-barrier.c to blk-flush.c Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 09/41] block: rename barrier/ordered to flush Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 10/41] block: implement REQ_FLUSH/FUA based interface for FLUSH/FUA requests Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 11/41] block: filter flush bio's in __generic_make_request() Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 12/41] block: simplify queue_next_fseq Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 13/41] block: initialize flush request with WRITE_FLUSH instead of REQ_FLUSH Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 14/41] block: kick queue after sequencing REQ_FLUSH/FUA Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 15/41] block: make sure FSEQ_DATA request has the same rq_disk as the original Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 16/41] block: update documentation for REQ_FLUSH / REQ_FUA Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 17/41] block: use REQ_FLUSH in blkdev_issue_flush() Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 18/41] block/loop: implement REQ_FLUSH/FUA support Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 19/41] virtio_blk: drop REQ_HARDBARRIER support Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 20/41] lguest: replace VIRTIO_F_BARRIER support with VIRTIO_F_FLUSH support Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 21/41] md: implment REQ_FLUSH/FUA support Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 22/41] block: make __blk_rq_prep_clone() copy most command flags Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 23/41] dm: implement REQ_FLUSH/FUA support for bio-based dm Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 12:36 ` Mike Snitzer
2010-09-06 11:14 ` [dm-devel] " Milan Broz
2010-09-07 21:17 ` Mike Snitzer
2010-09-07 22:15 ` Mike Snitzer
2010-09-07 23:49 ` [PATCH 42/41] dm: convey that all flushes are processed as empty Mike Snitzer
2010-09-08 0:00 ` Christoph Hellwig
2010-09-08 2:04 ` [PATCH 42/41 v2] " Mike Snitzer
2010-09-08 16:09 ` Tejun Heo
2010-09-08 16:09 ` Tejun Heo
2010-09-10 18:25 ` [PATCH 23/41] dm: implement REQ_FLUSH/FUA support for bio-based dm Mikulas Patocka
2010-09-10 18:46 ` Mike Snitzer
2010-09-10 19:05 ` Mikulas Patocka
2010-09-10 19:24 ` Mike Snitzer
2010-09-10 20:06 ` Mikulas Patocka
2010-09-10 23:36 ` Tejun Heo
2010-09-11 1:46 ` Mike Snitzer
[not found] ` <Pine.LNX.4.64.1009110500070.27949@hs20-bc2-1.build.redhat.com>
[not found] ` <20100911132102.GA29631@redhat.com>
[not found] ` <Pine.LNX.4.64.1009111251470.22177@hs20-bc2-1.build.redhat.com>
[not found] ` <20100911201758.GB31324@redhat.com>
2010-09-13 18:55 ` Mikulas Patocka
2010-09-13 20:54 ` Mike Snitzer
2010-09-18 17:58 ` Bill Davidsen
2010-09-18 20:42 ` [dm-devel] " Mike Snitzer
2010-09-11 12:19 ` Ric Wheeler
2010-09-13 19:01 ` Mikulas Patocka
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 24/41] dm: implement REQ_FLUSH/FUA support for request-based dm Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-08 1:46 ` Kiyoshi Ueda
2010-09-03 10:29 ` [PATCH 25/41] dm: relax ordering of bio-based flush implementation Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 26/41] dm: fix locking context in queue_io() Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 27/41] block: pass gfp_mask and flags to sb_issue_discard Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 28/41] xfs: replace barriers with explicit flush / FUA usage Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 29/41] btrfs: " Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 30/41] gfs2: " Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 31/41] reiserfs: " Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 32/41] nilfs2: " Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 33/41] jbd: " Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 34/41] jbd2: Modify ASYNC_COMMIT code to not rely on queue draining on barrier Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 35/41] jbd2: replace barriers with explicit flush / FUA usage Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 36/41] ext4: do not send discards as barriers Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 37/41] fat: " Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 38/41] swap: " Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 39/41] block: remove the WRITE_BARRIER flag Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 40/41] block: remove the BLKDEV_IFL_BARRIER flag Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` [PATCH 41/41] block: remove the BH_Eopnotsupp flag Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 10:29 ` Tejun Heo
2010-09-03 18:53 ` [PATCHSET #upstream] block, fs: replace HARDBARRIER with FLUSH/FUA, take#2 Jens Axboe
2010-09-03 18:53 ` Jens Axboe
2010-09-08 16:12 ` Tejun Heo
2010-09-08 16:12 ` Tejun Heo
2010-09-10 10:19 ` Jens Axboe
2010-09-10 10:19 ` Jens Axboe
2010-09-08 16:12 ` Tejun Heo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1283509796-1510-5-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=Geert.Uytterhoeven@sonycom.com \
--cc=agk@redhat.com \
--cc=chrisw@sous-sol.org \
--cc=davem@davemloft.net \
--cc=dm-devel@redhat.co \
--cc=drzeus@drzeus.cx \
--cc=fujita.tomonori@lab.ntt.co.jp \
--cc=hch@infradead.org \
--cc=jaxboe@fusionio.com \
--cc=jeremy@xensource.com \
--cc=linux-fsdevel@vger.kernel.org \
--cc=linux-ide@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-raid@vger.kernel.org \
--cc=linux-scsi@vger.kernel.org \
--cc=npiggin@kernel.dk \
--cc=wein@de.ibm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.