From: Pekka Enberg <penberg@kernel.org>
To: gregkh@suse.de
Cc: linux-kernel@vger.kernel.org, Pekka Enberg <penberg@kernel.org>,
Lars Lindley <lindley@coyote.org>, Pavel Machek <pavel@ucw.cz>,
Ruslan Pisarev <ruslan@rpisarev.org.ua>
Subject: [PATCH 4/7] w35und: Remove dead code from mlme_s.h
Date: Sun, 19 Sep 2010 12:28:40 +0300 [thread overview]
Message-ID: <1284888523-9625-4-git-send-email-penberg@kernel.org> (raw)
In-Reply-To: <1284888523-9625-3-git-send-email-penberg@kernel.org>
There's bunch of macros in mlme_s.h that aren't used for anything. Kill them
off.
Cc: Lars Lindley <lindley@coyote.org>
Cc: Pavel Machek <pavel@ucw.cz>
Cc: Ruslan Pisarev <ruslan@rpisarev.org.ua>
Signed-off-by: Pekka Enberg <penberg@kernel.org>
---
drivers/staging/winbond/mlme_s.h | 116 --------------------------------------
1 files changed, 0 insertions(+), 116 deletions(-)
diff --git a/drivers/staging/winbond/mlme_s.h b/drivers/staging/winbond/mlme_s.h
index d5b6364..0e7d2f6 100644
--- a/drivers/staging/winbond/mlme_s.h
+++ b/drivers/staging/winbond/mlme_s.h
@@ -8,112 +8,6 @@
#include "mds_s.h"
/*
- * +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- * Mlme.h
- * Define the related definitions of MLME module
- *
- * +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
- */
-
-#define AUTH_REJECT_REASON_CHALLENGE_FAIL 1
-
-/* the state of MLME module */
-#define INACTIVE 0x0
-#define IDLE_SCAN 0x1
-
-/* the state of MLME/ESS module */
-#define STATE_1 0x2
-#define AUTH_REQ 0x3
-#define AUTH_WEP 0x4
-#define STATE_2 0x5
-#define ASSOC_REQ 0x6
-#define STATE_3 0x7
-
-/* the state of MLME/IBSS module */
-#define IBSS_JOIN_SYNC 0x8
-#define IBSS_AUTH_REQ 0x9
-#define IBSS_AUTH_CHANLGE 0xa
-#define IBSS_AUTH_WEP 0xb
-#define IBSS_AUTH_IND 0xc
-#define IBSS_STATE_2 0xd
-
-
-
-/*
- * =========================================
- * depend on D5C(MAC timing control 03 register):
- * MaxTxMSDULifeTime default 0x80000us
- */
-#define AUTH_FAIL_TIMEOUT 550
-#define ASSOC_FAIL_TIMEOUT 550
-#define REASSOC_FAIL_TIMEOUT 550
-
-/* MLME task global CONSTANTS, STRUCTURE, variables */
-
-/* =========================================
- * enum_ResultCode --
- * Result code returned from MLME to SME.
- * =========================================
- */
-#define MLME_SUCCESS 0 /* follow spec. */
-#define INVALID_PARAMETERS 1 /* Not following spec. */
-#define NOT_SUPPPORTED 2
-#define TIMEOUT 3
-#define TOO_MANY_SIMULTANEOUS_REQUESTS 4
-#define REFUSED 5
-#define BSS_ALREADY_STARTED_OR_JOINED 6
-#define TRANSMIT_FRAME_FAIL 7
-#define NO_BSS_FOUND 8
-#define RETRY 9
-#define GIVE_UP 10
-
-
-#define OPEN_AUTH 0
-#define SHARE_AUTH 1
-#define ANY_AUTH 2
-#define WPA_AUTH 3 /* for WPA */
-#define WPAPSK_AUTH 4
-#define WPANONE_AUTH 5
-#ifdef _WPA2_
-#define WPA2_AUTH 6 /* for WPA2 */
-#define WPA2PSK_AUTH 7
-#endif /* end def _WPA2_ */
-
-/*
- * =========================================
- * define the msg type of MLME module
- * =========================================
- */
-
-/* from SME */
-#define MLMEMSG_AUTH_REQ 0x0b
-#define MLMEMSG_DEAUTH_REQ 0x0c
-#define MLMEMSG_ASSOC_REQ 0x0d
-#define MLMEMSG_REASSOC_REQ 0x0e
-#define MLMEMSG_DISASSOC_REQ 0x0f
-#define MLMEMSG_START_IBSS_REQ 0x10
-#define MLMEMSG_IBSS_NET_CFM 0x11
-
-/* from RX */
-#define MLMEMSG_RCV_MLMEFRAME 0x20
-#define MLMEMSG_RCV_ASSOCRSP 0x22
-#define MLMEMSG_RCV_REASSOCRSP 0x24
-#define MLMEMSG_RCV_DISASSOC 0x2b
-#define MLMEMSG_RCV_AUTH 0x2c
-#define MLMEMSG_RCV_DEAUTH 0x2d
-
-
-/* from TX callback */
-#define MLMEMSG_TX_CALLBACK 0x40
-#define MLMEMSG_ASSOCREQ_CALLBACK 0x41
-#define MLMEMSG_REASSOCREQ_CALLBACK 0x43
-#define MLMEMSG_DISASSOC_CALLBACK 0x4a
-#define MLMEMSG_AUTH_CALLBACK 0x4c
-#define MLMEMSG_DEAUTH_CALLBACK 0x4d
-
-#define MLMEMSG_TIMEOUT 0x50
-
-/*
* ==============================================
* Global data structures
* ==============================================
@@ -122,16 +16,6 @@
#define MAX_MMPDU_SIZE 1512
#define MAX_NUM_RX_MMPDU 6
-
-/*
- * ==============================================
- * MACRO
- * ==============================================
- */
-#define boMLME_InactiveState(_AA_) (_AA_->wState == INACTIVE)
-#define boMLME_IdleScanState(_BB_) (_BB_->wState == IDLE_SCAN)
-#define boMLME_FoundSTAinfo(_CC_) (_CC_->wState >= IDLE_SCAN)
-
struct mlme_frame {
s8 *pMMPDU;
u16 len;
--
1.6.3.3
next prev parent reply other threads:[~2010-09-19 9:29 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-09-19 9:28 [PATCH 1/7] w35und: Kill dead HAL macros in wbhal_f.h Pekka Enberg
2010-09-19 9:28 ` [PATCH 2/7] w35und: Remove remaining typedef declarations Pekka Enberg
2010-09-19 9:28 ` [PATCH 3/7] w35und: Kill unused scan_s.h header Pekka Enberg
2010-09-19 9:28 ` Pekka Enberg [this message]
2010-09-19 9:28 ` [PATCH 5/7] w35und: Inline mlme_s.h to core.h Pekka Enberg
2010-09-19 9:28 ` [PATCH 6/7] w35und: Remove unused spinlocks Pekka Enberg
2010-09-19 9:28 ` [PATCH 7/7] w35und: Remove unused fields from struct wbsoft_priv Pekka Enberg
2010-09-19 21:43 ` [PATCH 2/7] w35und: Remove remaining typedef declarations Pavel Machek
2010-09-19 21:42 ` [PATCH 1/7] w35und: Kill dead HAL macros in wbhal_f.h Pavel Machek
2010-09-19 21:43 ` Pavel Machek
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1284888523-9625-4-git-send-email-penberg@kernel.org \
--to=penberg@kernel.org \
--cc=gregkh@suse.de \
--cc=lindley@coyote.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pavel@ucw.cz \
--cc=ruslan@rpisarev.org.ua \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.