From: Mark Brown <broonie@opensource.wolfsonmicro.com>
To: Samuel Ortiz <sameo@linux.intel.com>
Cc: linux-kernel@vger.kernel.org,
patches@opensource.wolfsonmicro.com,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 2/2] mfd: Add WM831x SPI support
Date: Fri, 8 Oct 2010 14:23:23 -0700 [thread overview]
Message-ID: <1286573003-13889-2-git-send-email-broonie@opensource.wolfsonmicro.com> (raw)
In-Reply-To: <1286573003-13889-1-git-send-email-broonie@opensource.wolfsonmicro.com>
Implement support for controlling WM831x and WM832x devices using SPI.
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
---
Resending as my finger macro sent these to the ALSA list.
drivers/mfd/Kconfig | 10 ++
drivers/mfd/Makefile | 1 +
drivers/mfd/wm831x-spi.c | 232 ++++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 243 insertions(+), 0 deletions(-)
create mode 100644 drivers/mfd/wm831x-spi.c
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 608a277..40aa2e8 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -328,6 +328,16 @@ config MFD_WM831X_I2C
for accessing the device, additional drivers must be enabled in
order to use the functionality of the device.
+config MFD_WM831X_SPI
+ bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
+ select MFD_CORE
+ depends on SPI_MASTER && GENERIC_HARDIRQS
+ help
+ Support for the Wolfson Microelecronics WM831x and WM832x PMICs
+ when controlled using SPI. This driver provides common support
+ for accessing the device, additional drivers must be enabled in
+ order to use the functionality of the device.
+
config MFD_WM8350
bool
depends on GENERIC_HARDIRQS
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index c9ef41b..f54b365 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -25,6 +25,7 @@ obj-$(CONFIG_MFD_WM8400) += wm8400-core.o
wm831x-objs := wm831x-core.o wm831x-irq.o wm831x-otp.o
obj-$(CONFIG_MFD_WM831X) += wm831x.o
obj-$(CONFIG_MFD_WM831X_I2C) += wm831x-i2c.o
+obj-$(CONFIG_MFD_WM831X_SPI) += wm831x-spi.o
wm8350-objs := wm8350-core.o wm8350-regmap.o wm8350-gpio.o
wm8350-objs += wm8350-irq.o
obj-$(CONFIG_MFD_WM8350) += wm8350.o
diff --git a/drivers/mfd/wm831x-spi.c b/drivers/mfd/wm831x-spi.c
new file mode 100644
index 0000000..073d4c6
--- /dev/null
+++ b/drivers/mfd/wm831x-spi.c
@@ -0,0 +1,232 @@
+/*
+ * wm831x-spi.c -- SPI access for Wolfson WM831x PMICs
+ *
+ * Copyright 2009,2010 Wolfson Microelectronics PLC.
+ *
+ * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/spi/spi.h>
+
+#include <linux/mfd/wm831x/core.h>
+
+static int wm831x_spi_read_device(struct wm831x *wm831x, unsigned short reg,
+ int bytes, void *dest)
+{
+ u16 tx_val;
+ u16 *d = dest;
+ int r, ret;
+
+ /* Go register at a time */
+ for (r = reg; r < reg + (bytes / 2); r++) {
+ tx_val = r | 0x8000;
+
+ ret = spi_write_then_read(wm831x->control_data,
+ (u8 *)&tx_val, 2, (u8 *)d, 2);
+ if (ret != 0)
+ return ret;
+
+ *d = be16_to_cpu(*d);
+
+ d++;
+ }
+
+ return 0;
+}
+
+static int wm831x_spi_write_device(struct wm831x *wm831x, unsigned short reg,
+ int bytes, void *src)
+{
+ struct spi_device *spi = wm831x->control_data;
+ u16 *s = src;
+ u16 data[2];
+ int ret;
+
+ /* Go register at a time */
+ for (r = reg; r < reg + (bytes / 2); r++) {
+ data[0] = r;
+ data[1] = *s++;
+
+ ret = spi_write(spi, (char *)&data, sizeof(data));
+ if (ret != 0)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int __devinit wm831x_spi_probe(struct spi_device *spi)
+{
+ struct wm831x *wm831x;
+ enum wm831x_parent type;
+
+ /* Currently SPI support for ID tables is unmerged, we're faking it */
+ if (strcmp(spi->modalias, "wm8310") == 0)
+ type = WM8310;
+ else if (strcmp(spi->modalias, "wm8311") == 0)
+ type = WM8311;
+ else if (strcmp(spi->modalias, "wm8312") == 0)
+ type = WM8312;
+ else if (strcmp(spi->modalias, "wm8320") == 0)
+ type = WM8320;
+ else if (strcmp(spi->modalias, "wm8321") == 0)
+ type = WM8321;
+ else if (strcmp(spi->modalias, "wm8325") == 0)
+ type = WM8325;
+ else {
+ dev_err(&spi->dev, "Unknown device type\n");
+ return -EINVAL;
+ }
+
+ wm831x = kzalloc(sizeof(struct wm831x), GFP_KERNEL);
+ if (wm831x == NULL)
+ return -ENOMEM;
+
+ spi->bits_per_word = 16;
+ spi->mode = SPI_MODE_0;
+
+ dev_set_drvdata(&spi->dev, wm831x);
+ wm831x->dev = &spi->dev;
+ wm831x->control_data = spi;
+ wm831x->read_dev = wm831x_spi_read_device;
+ wm831x->write_dev = wm831x_spi_write_device;
+
+ return wm831x_device_init(wm831x, type, spi->irq);
+}
+
+static int __devexit wm831x_spi_remove(struct spi_device *spi)
+{
+ struct wm831x *wm831x = dev_get_drvdata(&spi->dev);
+
+ wm831x_device_exit(wm831x);
+
+ return 0;
+}
+
+static int wm831x_spi_suspend(struct spi_device *spi, pm_message_t m)
+{
+ struct wm831x *wm831x = dev_get_drvdata(&spi->dev);
+
+ return wm831x_device_suspend(wm831x);
+}
+
+static struct spi_driver wm8310_spi_driver = {
+ .driver = {
+ .name = "wm8310",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = wm831x_spi_probe,
+ .remove = __devexit_p(wm831x_spi_remove),
+ .suspend = wm831x_spi_suspend,
+};
+
+static struct spi_driver wm8311_spi_driver = {
+ .driver = {
+ .name = "wm8311",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = wm831x_spi_probe,
+ .remove = __devexit_p(wm831x_spi_remove),
+ .suspend = wm831x_spi_suspend,
+};
+
+static struct spi_driver wm8312_spi_driver = {
+ .driver = {
+ .name = "wm8312",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = wm831x_spi_probe,
+ .remove = __devexit_p(wm831x_spi_remove),
+ .suspend = wm831x_spi_suspend,
+};
+
+static struct spi_driver wm8320_spi_driver = {
+ .driver = {
+ .name = "wm8320",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = wm831x_spi_probe,
+ .remove = __devexit_p(wm831x_spi_remove),
+ .suspend = wm831x_spi_suspend,
+};
+
+static struct spi_driver wm8321_spi_driver = {
+ .driver = {
+ .name = "wm8321",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = wm831x_spi_probe,
+ .remove = __devexit_p(wm831x_spi_remove),
+ .suspend = wm831x_spi_suspend,
+};
+
+static struct spi_driver wm8325_spi_driver = {
+ .driver = {
+ .name = "wm8325",
+ .bus = &spi_bus_type,
+ .owner = THIS_MODULE,
+ },
+ .probe = wm831x_spi_probe,
+ .remove = __devexit_p(wm831x_spi_remove),
+ .suspend = wm831x_spi_suspend,
+};
+
+static int __init wm831x_spi_init(void)
+{
+ int ret;
+
+ ret = spi_register_driver(&wm8310_spi_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM8310 SPI driver: %d\n", ret);
+
+ ret = spi_register_driver(&wm8311_spi_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM8311 SPI driver: %d\n", ret);
+
+ ret = spi_register_driver(&wm8312_spi_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM8312 SPI driver: %d\n", ret);
+
+ ret = spi_register_driver(&wm8320_spi_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM8320 SPI driver: %d\n", ret);
+
+ ret = spi_register_driver(&wm8321_spi_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM8321 SPI driver: %d\n", ret);
+
+ ret = spi_register_driver(&wm8325_spi_driver);
+ if (ret != 0)
+ pr_err("Failed to register WM8325 SPI driver: %d\n", ret);
+
+ return 0;
+}
+subsys_initcall(wm831x_spi_init);
+
+static void __exit wm831x_spi_exit(void)
+{
+ spi_unregister_driver(&wm8325_spi_driver);
+ spi_unregister_driver(&wm8321_spi_driver);
+ spi_unregister_driver(&wm8320_spi_driver);
+ spi_unregister_driver(&wm8312_spi_driver);
+ spi_unregister_driver(&wm8311_spi_driver);
+ spi_unregister_driver(&wm8310_spi_driver);
+}
+module_exit(wm831x_spi_exit);
+
+MODULE_DESCRIPTION("SPI support for WM831x/2x AudioPlus PMICs");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Mark Brown");
--
1.7.1
next prev parent reply other threads:[~2010-10-08 21:23 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-10-08 21:23 [PATCH 1/2] mfd: Factor out WM831x I2C I/O from the core driver Mark Brown
2010-10-08 21:23 ` Mark Brown [this message]
2010-10-19 9:44 ` [PATCH 2/2] mfd: Add WM831x SPI support Samuel Ortiz
2010-10-19 9:53 ` Mark Brown
2010-10-19 10:52 ` Samuel Ortiz
2010-10-19 9:43 ` [PATCH 1/2] mfd: Factor out WM831x I2C I/O from the core driver Samuel Ortiz
2010-10-19 11:15 ` Samuel Ortiz
2010-10-19 15:14 ` Mark Brown
2010-10-19 15:27 ` Samuel Ortiz
2010-10-19 17:51 ` Mark Brown
-- strict thread matches above, loose matches on Subject: below --
2010-10-08 20:58 Mark Brown
2010-10-08 20:58 ` [PATCH 2/2] mfd: Add WM831x SPI support Mark Brown
2010-10-08 16:52 [PATCH 1/2] mfd: Factor out WM831x I2C I/O from the core driver Mark Brown
2010-10-08 16:52 ` [PATCH 2/2] mfd: Add WM831x SPI support Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1286573003-13889-2-git-send-email-broonie@opensource.wolfsonmicro.com \
--to=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=patches@opensource.wolfsonmicro.com \
--cc=sameo@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.