All of lore.kernel.org
 help / color / mirror / Atom feed
From: Samuel Ortiz <sameo@linux.intel.com>
To: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: linux-kernel@vger.kernel.org, patches@opensource.wolfsonmicro.com
Subject: Re: [PATCH 2/2] mfd: Add WM831x SPI support
Date: Tue, 19 Oct 2010 11:44:23 +0200	[thread overview]
Message-ID: <20101019094422.GG2736@sortiz-mobl> (raw)
In-Reply-To: <1286573003-13889-2-git-send-email-broonie@opensource.wolfsonmicro.com>

Hi Mark,

On Fri, Oct 08, 2010 at 02:23:23PM -0700, Mark Brown wrote:
> Implement support for controlling WM831x and WM832x devices using SPI.
Patch applied, many thanks.

Cheers,
Samuel.


> Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
> ---
> 
> Resending as my finger macro sent these to the ALSA list.
> 
>  drivers/mfd/Kconfig      |   10 ++
>  drivers/mfd/Makefile     |    1 +
>  drivers/mfd/wm831x-spi.c |  232 ++++++++++++++++++++++++++++++++++++++++++++++
>  3 files changed, 243 insertions(+), 0 deletions(-)
>  create mode 100644 drivers/mfd/wm831x-spi.c
> 
> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
> index 608a277..40aa2e8 100644
> --- a/drivers/mfd/Kconfig
> +++ b/drivers/mfd/Kconfig
> @@ -328,6 +328,16 @@ config MFD_WM831X_I2C
>  	  for accessing the device, additional drivers must be enabled in
>  	  order to use the functionality of the device.
>  
> +config MFD_WM831X_SPI
> +	bool "Support Wolfson Microelectronics WM831x/2x PMICs with SPI"
> +	select MFD_CORE
> +	depends on SPI_MASTER && GENERIC_HARDIRQS
> +	help
> +	  Support for the Wolfson Microelecronics WM831x and WM832x PMICs
> +	  when controlled using SPI.  This driver provides common support
> +	  for accessing the device, additional drivers must be enabled in
> +	  order to use the functionality of the device.
> +
>  config MFD_WM8350
>  	bool
>  	depends on GENERIC_HARDIRQS
> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
> index c9ef41b..f54b365 100644
> --- a/drivers/mfd/Makefile
> +++ b/drivers/mfd/Makefile
> @@ -25,6 +25,7 @@ obj-$(CONFIG_MFD_WM8400)	+= wm8400-core.o
>  wm831x-objs			:= wm831x-core.o wm831x-irq.o wm831x-otp.o
>  obj-$(CONFIG_MFD_WM831X)	+= wm831x.o
>  obj-$(CONFIG_MFD_WM831X_I2C)	+= wm831x-i2c.o
> +obj-$(CONFIG_MFD_WM831X_SPI)	+= wm831x-spi.o
>  wm8350-objs			:= wm8350-core.o wm8350-regmap.o wm8350-gpio.o
>  wm8350-objs			+= wm8350-irq.o
>  obj-$(CONFIG_MFD_WM8350)	+= wm8350.o
> diff --git a/drivers/mfd/wm831x-spi.c b/drivers/mfd/wm831x-spi.c
> new file mode 100644
> index 0000000..073d4c6
> --- /dev/null
> +++ b/drivers/mfd/wm831x-spi.c
> @@ -0,0 +1,232 @@
> +/*
> + * wm831x-spi.c  --  SPI access for Wolfson WM831x PMICs
> + *
> + * Copyright 2009,2010 Wolfson Microelectronics PLC.
> + *
> + * Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
> + *
> + *  This program is free software; you can redistribute  it and/or modify it
> + *  under  the terms of  the GNU General  Public License as published by the
> + *  Free Software Foundation;  either version 2 of the  License, or (at your
> + *  option) any later version.
> + *
> + */
> +
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/spi/spi.h>
> +
> +#include <linux/mfd/wm831x/core.h>
> +
> +static int wm831x_spi_read_device(struct wm831x *wm831x, unsigned short reg,
> +				  int bytes, void *dest)
> +{
> +	u16 tx_val;
> +	u16 *d = dest;
> +	int r, ret;
> +
> +	/* Go register at a time */
> +	for (r = reg; r < reg + (bytes / 2); r++) {
> +		tx_val = r | 0x8000;
> +
> +		ret = spi_write_then_read(wm831x->control_data,
> +					  (u8 *)&tx_val, 2, (u8 *)d, 2);
> +		if (ret != 0)
> +			return ret;
> +
> +		*d = be16_to_cpu(*d);
> +
> +		d++;
> +	}
> +
> +	return 0;
> +}
> +
> +static int wm831x_spi_write_device(struct wm831x *wm831x, unsigned short reg,
> +				   int bytes, void *src)
> +{
> +	struct spi_device *spi = wm831x->control_data;
> +	u16 *s = src;
> +	u16 data[2];
> +	int ret;
> +
> +	/* Go register at a time */
> +	for (r = reg; r < reg + (bytes / 2); r++) {
> +		data[0] = r;
> +		data[1] = *s++;
> +
> +		ret = spi_write(spi, (char *)&data, sizeof(data));
> +		if (ret != 0)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int __devinit wm831x_spi_probe(struct spi_device *spi)
> +{
> +	struct wm831x *wm831x;
> +	enum wm831x_parent type;
> +
> +	/* Currently SPI support for ID tables is unmerged, we're faking it */
> +	if (strcmp(spi->modalias, "wm8310") == 0)
> +		type = WM8310;
> +	else if (strcmp(spi->modalias, "wm8311") == 0)
> +		type = WM8311;
> +	else if (strcmp(spi->modalias, "wm8312") == 0)
> +		type = WM8312;
> +	else if (strcmp(spi->modalias, "wm8320") == 0)
> +		type = WM8320;
> +	else if (strcmp(spi->modalias, "wm8321") == 0)
> +		type = WM8321;
> +	else if (strcmp(spi->modalias, "wm8325") == 0)
> +		type = WM8325;
> +	else {
> +		dev_err(&spi->dev, "Unknown device type\n");
> +		return -EINVAL;
> +	}
> +
> +	wm831x = kzalloc(sizeof(struct wm831x), GFP_KERNEL);
> +	if (wm831x == NULL)
> +		return -ENOMEM;
> +
> +	spi->bits_per_word = 16;
> +	spi->mode = SPI_MODE_0;
> +
> +	dev_set_drvdata(&spi->dev, wm831x);
> +	wm831x->dev = &spi->dev;
> +	wm831x->control_data = spi;
> +	wm831x->read_dev = wm831x_spi_read_device;
> +	wm831x->write_dev = wm831x_spi_write_device;
> +
> +	return wm831x_device_init(wm831x, type, spi->irq);
> +}
> +
> +static int __devexit wm831x_spi_remove(struct spi_device *spi)
> +{
> +	struct wm831x *wm831x = dev_get_drvdata(&spi->dev);
> +
> +	wm831x_device_exit(wm831x);
> +
> +	return 0;
> +}
> +
> +static int wm831x_spi_suspend(struct spi_device *spi, pm_message_t m)
> +{
> +	struct wm831x *wm831x = dev_get_drvdata(&spi->dev);
> +
> +	return wm831x_device_suspend(wm831x);
> +}
> +
> +static struct spi_driver wm8310_spi_driver = {
> +	.driver = {
> +		.name	= "wm8310",
> +		.bus	= &spi_bus_type,
> +		.owner	= THIS_MODULE,
> +	},
> +	.probe		= wm831x_spi_probe,
> +	.remove		= __devexit_p(wm831x_spi_remove),
> +	.suspend	= wm831x_spi_suspend,
> +};
> +
> +static struct spi_driver wm8311_spi_driver = {
> +	.driver = {
> +		.name	= "wm8311",
> +		.bus	= &spi_bus_type,
> +		.owner	= THIS_MODULE,
> +	},
> +	.probe		= wm831x_spi_probe,
> +	.remove		= __devexit_p(wm831x_spi_remove),
> +	.suspend	= wm831x_spi_suspend,
> +};
> +
> +static struct spi_driver wm8312_spi_driver = {
> +	.driver = {
> +		.name	= "wm8312",
> +		.bus	= &spi_bus_type,
> +		.owner	= THIS_MODULE,
> +	},
> +	.probe		= wm831x_spi_probe,
> +	.remove		= __devexit_p(wm831x_spi_remove),
> +	.suspend	= wm831x_spi_suspend,
> +};
> +
> +static struct spi_driver wm8320_spi_driver = {
> +	.driver = {
> +		.name	= "wm8320",
> +		.bus	= &spi_bus_type,
> +		.owner	= THIS_MODULE,
> +	},
> +	.probe		= wm831x_spi_probe,
> +	.remove		= __devexit_p(wm831x_spi_remove),
> +	.suspend	= wm831x_spi_suspend,
> +};
> +
> +static struct spi_driver wm8321_spi_driver = {
> +	.driver = {
> +		.name	= "wm8321",
> +		.bus	= &spi_bus_type,
> +		.owner	= THIS_MODULE,
> +	},
> +	.probe		= wm831x_spi_probe,
> +	.remove		= __devexit_p(wm831x_spi_remove),
> +	.suspend	= wm831x_spi_suspend,
> +};
> +
> +static struct spi_driver wm8325_spi_driver = {
> +	.driver = {
> +		.name	= "wm8325",
> +		.bus	= &spi_bus_type,
> +		.owner	= THIS_MODULE,
> +	},
> +	.probe		= wm831x_spi_probe,
> +	.remove		= __devexit_p(wm831x_spi_remove),
> +	.suspend	= wm831x_spi_suspend,
> +};
> +
> +static int __init wm831x_spi_init(void)
> +{
> +	int ret;
> +
> +	ret = spi_register_driver(&wm8310_spi_driver);
> +	if (ret != 0)
> +		pr_err("Failed to register WM8310 SPI driver: %d\n", ret);
> +
> +	ret = spi_register_driver(&wm8311_spi_driver);
> +	if (ret != 0)
> +		pr_err("Failed to register WM8311 SPI driver: %d\n", ret);
> +
> +	ret = spi_register_driver(&wm8312_spi_driver);
> +	if (ret != 0)
> +		pr_err("Failed to register WM8312 SPI driver: %d\n", ret);
> +
> +	ret = spi_register_driver(&wm8320_spi_driver);
> +	if (ret != 0)
> +		pr_err("Failed to register WM8320 SPI driver: %d\n", ret);
> +
> +	ret = spi_register_driver(&wm8321_spi_driver);
> +	if (ret != 0)
> +		pr_err("Failed to register WM8321 SPI driver: %d\n", ret);
> +
> +	ret = spi_register_driver(&wm8325_spi_driver);
> +	if (ret != 0)
> +		pr_err("Failed to register WM8325 SPI driver: %d\n", ret);
> +
> +	return 0;
> +}
> +subsys_initcall(wm831x_spi_init);
> +
> +static void __exit wm831x_spi_exit(void)
> +{
> +	spi_unregister_driver(&wm8325_spi_driver);
> +	spi_unregister_driver(&wm8321_spi_driver);
> +	spi_unregister_driver(&wm8320_spi_driver);
> +	spi_unregister_driver(&wm8312_spi_driver);
> +	spi_unregister_driver(&wm8311_spi_driver);
> +	spi_unregister_driver(&wm8310_spi_driver);
> +}
> +module_exit(wm831x_spi_exit);
> +
> +MODULE_DESCRIPTION("SPI support for WM831x/2x AudioPlus PMICs");
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Mark Brown");
> -- 
> 1.7.1
> 

-- 
Intel Open Source Technology Centre
http://oss.intel.com/

  reply	other threads:[~2010-10-19  9:44 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-10-08 21:23 [PATCH 1/2] mfd: Factor out WM831x I2C I/O from the core driver Mark Brown
2010-10-08 21:23 ` [PATCH 2/2] mfd: Add WM831x SPI support Mark Brown
2010-10-19  9:44   ` Samuel Ortiz [this message]
2010-10-19  9:53     ` Mark Brown
2010-10-19 10:52       ` Samuel Ortiz
2010-10-19  9:43 ` [PATCH 1/2] mfd: Factor out WM831x I2C I/O from the core driver Samuel Ortiz
2010-10-19 11:15 ` Samuel Ortiz
2010-10-19 15:14   ` Mark Brown
2010-10-19 15:27     ` Samuel Ortiz
2010-10-19 17:51       ` Mark Brown
  -- strict thread matches above, loose matches on Subject: below --
2010-10-08 20:58 Mark Brown
2010-10-08 20:58 ` [PATCH 2/2] mfd: Add WM831x SPI support Mark Brown
2010-10-08 16:52 [PATCH 1/2] mfd: Factor out WM831x I2C I/O from the core driver Mark Brown
2010-10-08 16:52 ` [PATCH 2/2] mfd: Add WM831x SPI support Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20101019094422.GG2736@sortiz-mobl \
    --to=sameo@linux.intel.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=patches@opensource.wolfsonmicro.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.