From: Larry Finger <Larry.Finger@lwfinger.net>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org, chaoming_li@realsil.com.cn,
Larry Finger <Larry.Finger@lwfinger.net>
Subject: [PATCH 18/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 18: rtl8192c-rf.{c,h}
Date: Wed, 8 Dec 2010 11:12:48 -0600 [thread overview]
Message-ID: <1291828372-25159-19-git-send-email-Larry.Finger@lwfinger.net> (raw)
In-Reply-To: <1291828372-25159-1-git-send-email-Larry.Finger@lwfinger.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
---
.../net/wireless/rtlwifi/rtl8192ce/rtl8192c-rf.c | 523 ++++++++++++++++++++
.../net/wireless/rtlwifi/rtl8192ce/rtl8192c-rf.h | 44 ++
2 files changed, 567 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-rf.c
create mode 100644 drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-rf.h
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-rf.c b/drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-rf.c
new file mode 100644
index 0000000..a2d58df
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-rf.c
@@ -0,0 +1,523 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "../wifi.h"
+#include "rtl8192c-reg.h"
+#include "rtl8192c-def.h"
+#include "rtl8192c-phy.h"
+#include "rtl8192c-rf.h"
+#include "rtl8192c-dm.h"
+
+static bool _rtl92c_phy_rf6052_config_parafile(struct ieee80211_hw *hw);
+
+void rtl92c_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw, u8 bandwidth)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ switch (bandwidth) {
+ case HT_CHANNEL_WIDTH_20:
+ rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+ 0xfffff3ff) | 0x0400);
+ rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+ rtlphy->rfreg_chnlval[0]);
+ break;
+ case HT_CHANNEL_WIDTH_20_40:
+ rtlphy->rfreg_chnlval[0] = ((rtlphy->rfreg_chnlval[0] &
+ 0xfffff3ff));
+ rtl_set_rfreg(hw, RF90_PATH_A, RF_CHNLBW, RFREG_OFFSET_MASK,
+ rtlphy->rfreg_chnlval[0]);
+ break;
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("unknown bandwidth: %#X\n", bandwidth));
+ break;
+ }
+}
+
+void rtl92c_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
+ u8 *ppowerlevel)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u32 tx_agc[2] = {0, 0}, tmpval;
+ bool turbo_scanoff = false;
+ u8 idx1, idx2;
+ u8 *ptr;
+
+ if (rtlefuse->eeprom_regulatory != 0)
+ turbo_scanoff = true;
+
+ if (mac->act_scanning == true) {
+ tx_agc[RF90_PATH_A] = 0x3f3f3f3f;
+ tx_agc[RF90_PATH_B] = 0x3f3f3f3f;
+
+ if (turbo_scanoff) {
+ for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+ tx_agc[idx1] = ppowerlevel[idx1] |
+ (ppowerlevel[idx1] << 8) |
+ (ppowerlevel[idx1] << 16) |
+ (ppowerlevel[idx1] << 24);
+ }
+ }
+ } else {
+ for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+ tx_agc[idx1] = ppowerlevel[idx1] |
+ (ppowerlevel[idx1] << 8) |
+ (ppowerlevel[idx1] << 16) |
+ (ppowerlevel[idx1] << 24);
+ }
+
+ if (rtlefuse->eeprom_regulatory == 0) {
+ tmpval =
+ (rtlphy->mcs_txpwrlevel_origoffset[0][6]) +
+ (rtlphy->mcs_txpwrlevel_origoffset[0][7] <<
+ 8);
+ tx_agc[RF90_PATH_A] += tmpval;
+
+ tmpval = (rtlphy->mcs_txpwrlevel_origoffset[0][14]) +
+ (rtlphy->mcs_txpwrlevel_origoffset[0][15] <<
+ 24);
+ tx_agc[RF90_PATH_B] += tmpval;
+ }
+ }
+
+ for (idx1 = RF90_PATH_A; idx1 <= RF90_PATH_B; idx1++) {
+ ptr = (u8 *) (&(tx_agc[idx1]));
+ for (idx2 = 0; idx2 < 4; idx2++) {
+ if (*ptr > RF6052_MAX_TX_PWR)
+ *ptr = RF6052_MAX_TX_PWR;
+ ptr++;
+ }
+ }
+
+ tmpval = tx_agc[RF90_PATH_A] & 0xff;
+ rtl_set_bbreg(hw, RTXAGC_A_CCK1_MCS32, MASKBYTE1, tmpval);
+
+ RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+ ("CCK PWR 1M (rf-A) = 0x%x (reg 0x%x)\n", tmpval,
+ RTXAGC_A_CCK1_MCS32));
+
+ tmpval = tx_agc[RF90_PATH_A] >> 8;
+
+ if (mac->mode == WIRELESS_MODE_B)
+ tmpval = tmpval & 0xff00ffff;
+
+ rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, 0xffffff00, tmpval);
+
+ RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+ ("CCK PWR 2~11M (rf-A) = 0x%x (reg 0x%x)\n", tmpval,
+ RTXAGC_B_CCK11_A_CCK2_11));
+
+ tmpval = tx_agc[RF90_PATH_B] >> 24;
+ rtl_set_bbreg(hw, RTXAGC_B_CCK11_A_CCK2_11, MASKBYTE0, tmpval);
+
+ RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+ ("CCK PWR 11M (rf-B) = 0x%x (reg 0x%x)\n", tmpval,
+ RTXAGC_B_CCK11_A_CCK2_11));
+
+ tmpval = tx_agc[RF90_PATH_B] & 0x00ffffff;
+ rtl_set_bbreg(hw, RTXAGC_B_CCK1_55_MCS32, 0xffffff00, tmpval);
+
+ RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+ ("CCK PWR 1~5.5M (rf-B) = 0x%x (reg 0x%x)\n", tmpval,
+ RTXAGC_B_CCK1_55_MCS32));
+}
+
+static void rtl92c_phy_get_power_base(struct ieee80211_hw *hw,
+ u8 *ppowerlevel, u8 channel,
+ u32 *ofdmbase, u32 *mcsbase)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u32 powerBase0, powerBase1;
+ u8 legacy_pwrdiff, ht20_pwrdiff;
+ u8 i, powerlevel[2];
+
+ for (i = 0; i < 2; i++) {
+ powerlevel[i] = ppowerlevel[i];
+ legacy_pwrdiff = rtlefuse->txpwr_legacyhtdiff[i][channel - 1];
+ powerBase0 = powerlevel[i] + legacy_pwrdiff;
+
+ powerBase0 = (powerBase0 << 24) | (powerBase0 << 16) |
+ (powerBase0 << 8) | powerBase0;
+ *(ofdmbase + i) = powerBase0;
+ RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+ (" [OFDM power base index rf(%c) = 0x%x]\n",
+ ((i == 0) ? 'A' : 'B'), *(ofdmbase + i)));
+ }
+
+ for (i = 0; i < 2; i++) {
+ if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20) {
+ ht20_pwrdiff = rtlefuse->txpwr_ht20diff[i][channel - 1];
+ powerlevel[i] += ht20_pwrdiff;
+ }
+ powerBase1 = powerlevel[i];
+ powerBase1 = (powerBase1 << 24) |
+ (powerBase1 << 16) | (powerBase1 << 8) | powerBase1;
+
+ *(mcsbase + i) = powerBase1;
+
+ RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+ (" [MCS power base index rf(%c) = 0x%x]\n",
+ ((i == 0) ? 'A' : 'B'), *(mcsbase + i)));
+ }
+}
+
+static void _rtl92c_get_txpower_writeval_by_regulatory(struct ieee80211_hw *hw,
+ u8 channel, u8 index,
+ u32 *powerBase0,
+ u32 *powerBase1,
+ u32 *p_outwriteval)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ struct rtl_efuse *rtlefuse = rtl_efuse(rtl_priv(hw));
+ u8 i, chnlgroup, pwr_diff_limit[4];
+ u32 writeVal, customer_limit, rf;
+
+ for (rf = 0; rf < 2; rf++) {
+ switch (rtlefuse->eeprom_regulatory) {
+ case 0:
+ chnlgroup = 0;
+
+ writeVal =
+ rtlphy->mcs_txpwrlevel_origoffset[chnlgroup][index +
+ (rf ? 8 : 0)]
+ + ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
+
+ RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+ ("RTK better performance, "
+ "writeVal(%c) = 0x%x\n",
+ ((rf == 0) ? 'A' : 'B'), writeVal));
+ break;
+ case 1:
+ if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+ writeVal = ((index < 2) ? powerBase0[rf] :
+ powerBase1[rf]);
+
+ RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+ ("Realtek regulatory, 40MHz, "
+ "writeVal(%c) = 0x%x\n",
+ ((rf == 0) ? 'A' : 'B'), writeVal));
+ } else {
+ if (rtlphy->pwrgroup_cnt == 1)
+ chnlgroup = 0;
+ if (rtlphy->pwrgroup_cnt >= 3) {
+ if (channel <= 3)
+ chnlgroup = 0;
+ else if (channel >= 4 && channel <= 9)
+ chnlgroup = 1;
+ else if (channel > 9)
+ chnlgroup = 2;
+ if (rtlphy->pwrgroup_cnt == 4)
+ chnlgroup++;
+ }
+
+ writeVal =
+ rtlphy->mcs_txpwrlevel_origoffset[chnlgroup]
+ [index + (rf ? 8 : 0)] + ((index < 2) ?
+ powerBase0[rf] :
+ powerBase1[rf]);
+
+ RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+ ("Realtek regulatory, 20MHz, "
+ "writeVal(%c) = 0x%x\n",
+ ((rf == 0) ? 'A' : 'B'), writeVal));
+ }
+ break;
+ case 2:
+ writeVal =
+ ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
+
+ RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+ ("Better regulatory, "
+ "writeVal(%c) = 0x%x\n",
+ ((rf == 0) ? 'A' : 'B'), writeVal));
+ break;
+ case 3:
+ chnlgroup = 0;
+
+ if (rtlphy->current_chan_bw == HT_CHANNEL_WIDTH_20_40) {
+ RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+ ("customer's limit, 40MHz "
+ "rf(%c) = 0x%x\n",
+ ((rf == 0) ? 'A' : 'B'),
+ rtlefuse->pwrgroup_ht40[rf][channel -
+ 1]));
+ } else {
+ RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+ ("customer's limit, 20MHz "
+ "rf(%c) = 0x%x\n",
+ ((rf == 0) ? 'A' : 'B'),
+ rtlefuse->pwrgroup_ht20[rf][channel -
+ 1]));
+ }
+ for (i = 0; i < 4; i++) {
+ pwr_diff_limit[i] =
+ (u8) ((rtlphy->mcs_txpwrlevel_origoffset
+ [chnlgroup][index +
+ (rf ? 8 : 0)] & (0x7f << (i * 8))) >>
+ (i * 8));
+
+ if (rtlphy->current_chan_bw ==
+ HT_CHANNEL_WIDTH_20_40) {
+ if (pwr_diff_limit[i] >
+ rtlefuse->
+ pwrgroup_ht40[rf][channel - 1])
+ pwr_diff_limit[i] =
+ rtlefuse->pwrgroup_ht40[rf]
+ [channel - 1];
+ } else {
+ if (pwr_diff_limit[i] >
+ rtlefuse->
+ pwrgroup_ht20[rf][channel - 1])
+ pwr_diff_limit[i] =
+ rtlefuse->pwrgroup_ht20[rf]
+ [channel - 1];
+ }
+ }
+
+ customer_limit = (pwr_diff_limit[3] << 24) |
+ (pwr_diff_limit[2] << 16) |
+ (pwr_diff_limit[1] << 8) | (pwr_diff_limit[0]);
+
+ RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+ ("Customer's limit rf(%c) = 0x%x\n",
+ ((rf == 0) ? 'A' : 'B'), customer_limit));
+
+ writeVal = customer_limit +
+ ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
+
+ RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+ ("Customer, writeVal rf(%c)= 0x%x\n",
+ ((rf == 0) ? 'A' : 'B'), writeVal));
+ break;
+ default:
+ chnlgroup = 0;
+ writeVal =
+ rtlphy->mcs_txpwrlevel_origoffset[chnlgroup]
+ [index + (rf ? 8 : 0)]
+ + ((index < 2) ? powerBase0[rf] : powerBase1[rf]);
+
+ RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+ ("RTK better performance, writeVal "
+ "rf(%c) = 0x%x\n",
+ ((rf == 0) ? 'A' : 'B'), writeVal));
+ break;
+ }
+
+ if (rtlpriv->dm.dynamic_txhighpower_lvl == TXHIGHPWRLEVEL_BT1)
+ writeVal = writeVal - 0x06060606;
+ else if (rtlpriv->dm.dynamic_txhighpower_lvl ==
+ TXHIGHPWRLEVEL_BT2)
+ writeVal = writeVal - 0x0c0c0c0c;
+ *(p_outwriteval + rf) = writeVal;
+ }
+}
+
+static void _rtl92c_write_ofdm_power_reg(struct ieee80211_hw *hw,
+ u8 index, u32 *pValue)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ u16 regoffset_a[6] = {
+ RTXAGC_A_RATE18_06, RTXAGC_A_RATE54_24,
+ RTXAGC_A_MCS03_MCS00, RTXAGC_A_MCS07_MCS04,
+ RTXAGC_A_MCS11_MCS08, RTXAGC_A_MCS15_MCS12
+ };
+ u16 regoffset_b[6] = {
+ RTXAGC_B_RATE18_06, RTXAGC_B_RATE54_24,
+ RTXAGC_B_MCS03_MCS00, RTXAGC_B_MCS07_MCS04,
+ RTXAGC_B_MCS11_MCS08, RTXAGC_B_MCS15_MCS12
+ };
+ u8 i, rf, pwr_val[4];
+ u32 writeVal;
+ u16 regoffset;
+
+ for (rf = 0; rf < 2; rf++) {
+ writeVal = pValue[rf];
+ for (i = 0; i < 4; i++) {
+ pwr_val[i] = (u8) ((writeVal & (0x7f <<
+ (i * 8))) >> (i * 8));
+
+ if (pwr_val[i] > RF6052_MAX_TX_PWR)
+ pwr_val[i] = RF6052_MAX_TX_PWR;
+ }
+ writeVal = (pwr_val[3] << 24) | (pwr_val[2] << 16) |
+ (pwr_val[1] << 8) | pwr_val[0];
+
+ if (rf == 0)
+ regoffset = regoffset_a[index];
+ else
+ regoffset = regoffset_b[index];
+ rtl_set_bbreg(hw, regoffset, MASKDWORD, writeVal);
+
+ RTPRINT(rtlpriv, FPHY, PHY_TXPWR,
+ ("Set 0x%x = %08x\n", regoffset, writeVal));
+
+ if (((get_rf_type(rtlphy) == RF_2T2R) &&
+ (regoffset == RTXAGC_A_MCS15_MCS12 ||
+ regoffset == RTXAGC_B_MCS15_MCS12)) ||
+ ((get_rf_type(rtlphy) != RF_2T2R) &&
+ (regoffset == RTXAGC_A_MCS07_MCS04 ||
+ regoffset == RTXAGC_B_MCS07_MCS04))) {
+
+ writeVal = pwr_val[3];
+ if (regoffset == RTXAGC_A_MCS15_MCS12 ||
+ regoffset == RTXAGC_A_MCS07_MCS04)
+ regoffset = 0xc90;
+ if (regoffset == RTXAGC_B_MCS15_MCS12 ||
+ regoffset == RTXAGC_B_MCS07_MCS04)
+ regoffset = 0xc98;
+
+ for (i = 0; i < 3; i++) {
+ writeVal = (writeVal > 6) ? (writeVal - 6) : 0;
+ rtl_write_byte(rtlpriv, (u32) (regoffset + i),
+ (u8) writeVal);
+ }
+ }
+ }
+}
+
+void rtl92c_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
+ u8 *ppowerlevel, u8 channel)
+{
+ u32 writeVal[2], powerBase0[2], powerBase1[2];
+ u8 index;
+
+ rtl92c_phy_get_power_base(hw, ppowerlevel,
+ channel, &powerBase0[0], &powerBase1[0]);
+
+ for (index = 0; index < 6; index++) {
+ _rtl92c_get_txpower_writeval_by_regulatory(hw,
+ channel, index,
+ &powerBase0[0],
+ &powerBase1[0],
+ &writeVal[0]);
+
+ _rtl92c_write_ofdm_power_reg(hw, index, &writeVal[0]);
+ }
+}
+
+bool rtl92c_phy_rf6052_config(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+
+ if (rtlphy->rf_type == RF_1T1R)
+ rtlphy->num_total_rfpath = 1;
+ else
+ rtlphy->num_total_rfpath = 2;
+
+ return _rtl92c_phy_rf6052_config_parafile(hw);
+}
+
+static bool _rtl92c_phy_rf6052_config_parafile(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_phy *rtlphy = &(rtlpriv->phy);
+ u32 u4_regvalue;
+ u8 rfpath;
+ bool rtstatus;
+ struct bb_reg_def *pphyreg;
+
+ for (rfpath = 0; rfpath < rtlphy->num_total_rfpath; rfpath++) {
+
+ pphyreg = &rtlphy->phyreg_def[rfpath];
+
+ switch (rfpath) {
+ case RF90_PATH_A:
+ case RF90_PATH_C:
+ u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
+ BRFSI_RFENV);
+ break;
+ case RF90_PATH_B:
+ case RF90_PATH_D:
+ u4_regvalue = rtl_get_bbreg(hw, pphyreg->rfintfs,
+ BRFSI_RFENV << 16);
+ break;
+ }
+
+ rtl_set_bbreg(hw, pphyreg->rfintfe, BRFSI_RFENV << 16, 0x1);
+ udelay(1);
+
+ rtl_set_bbreg(hw, pphyreg->rfintfo, BRFSI_RFENV, 0x1);
+ udelay(1);
+
+ rtl_set_bbreg(hw, pphyreg->rfhssi_para2,
+ B3WIREADDREAALENGTH, 0x0);
+ udelay(1);
+
+ rtl_set_bbreg(hw, pphyreg->rfhssi_para2, B3WIREDATALENGTH, 0x0);
+ udelay(1);
+
+ switch (rfpath) {
+ case RF90_PATH_A:
+ rtstatus = rtl92c_phy_config_rf_with_headerfile(hw,
+ (enum radio_path) rfpath);
+ break;
+ case RF90_PATH_B:
+ rtstatus = rtl92c_phy_config_rf_with_headerfile(hw,
+ (enum radio_path) rfpath);
+ break;
+ case RF90_PATH_C:
+ break;
+ case RF90_PATH_D:
+ break;
+ }
+
+ switch (rfpath) {
+ case RF90_PATH_A:
+ case RF90_PATH_C:
+ rtl_set_bbreg(hw, pphyreg->rfintfs,
+ BRFSI_RFENV, u4_regvalue);
+ break;
+ case RF90_PATH_B:
+ case RF90_PATH_D:
+ rtl_set_bbreg(hw, pphyreg->rfintfs,
+ BRFSI_RFENV << 16, u4_regvalue);
+ break;
+ }
+
+ if (rtstatus != true) {
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE,
+ ("Radio[%d] Fail!!", rfpath));
+ return false;
+ }
+
+ }
+
+ RT_TRACE(rtlpriv, COMP_INIT, DBG_TRACE, ("<---\n"));
+ return rtstatus;
+}
diff --git a/drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-rf.h b/drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-rf.h
new file mode 100644
index 0000000..d3014f9
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/rtl8192ce/rtl8192c-rf.h
@@ -0,0 +1,44 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __RTL92C_RF_H__
+#define __RTL92C_RF_H__
+
+#define RF6052_MAX_TX_PWR 0x3F
+#define RF6052_MAX_REG 0x3F
+#define RF6052_MAX_PATH 2
+
+extern void rtl92c_phy_rf6052_set_bandwidth(struct ieee80211_hw *hw,
+ u8 bandwidth);
+extern void rtl92c_phy_rf6052_set_cck_txpower(struct ieee80211_hw *hw,
+ u8 *ppowerlevel);
+extern void rtl92c_phy_rf6052_set_ofdm_txpower(struct ieee80211_hw *hw,
+ u8 *ppowerlevel, u8 channel);
+extern bool rtl92c_phy_rf6052_config(struct ieee80211_hw *hw);
+#endif
--
1.7.1
next prev parent reply other threads:[~2010-12-08 17:14 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-08 17:12 [PATCH 00/22] rtl8192ce: Initial upload of driver Larry Finger
2010-12-08 17:12 ` [PATCH 01/22] rtl8192ce: Add files to rtlwifi - Part 1: core.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 02/22] rtl8192ce: Add files to rtlwifi - Part 2: base.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 03/22] rtl8192ce: Add files to rtlwifi - Part 3: cam.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 04/22] rtl8192ce: Add files to rtlwifi - Part 4: debug.{c,h} Larry Finger
2011-01-25 4:10 ` [PATCH] fix_rtlwifi_rfkill_state_not_synchronous_with_true_rfstate_issue 李朝明
2011-01-25 5:08 ` 李朝明
2011-01-26 17:34 ` Larry Finger
2010-12-08 17:12 ` [PATCH 05/22] rtl8192ce: Add files to rtlwifi - Part 5: efuse.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 06/22] rtl8192ce: Add files to rtlwifi - Part 6: pci.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 07/22] rtl8192ce: Add files to rtlwifi - Part 7: ps.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 08/22] rtl8192ce: Add files to rtlwifi - Part 8: rc.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 09/22] rtl8192ce: Add files to rtlwifi - Part 9: regd.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 10/22] rtl8192ce: Add files to rtlwifi - Part 10: wifi.h Larry Finger
2010-12-08 17:12 ` [PATCH 11/22] rtl8192ce: Add files to rtlwifi - Part 11: Kconfig and Makefile Larry Finger
2010-12-08 17:12 ` [PATCH 12/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 12: rtl8192c-dm.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 13/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 13: rtl8192c-fw.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 14/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 14: rtl8192c-hw.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 15/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 15: rtl8192c-led.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 16/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 16: rtl8192c-phy.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 17/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 17: rtl8192c-sw.{c,h} Larry Finger
2010-12-08 17:12 ` Larry Finger [this message]
2010-12-08 17:12 ` [PATCH 19/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 19: rtl8192c-table.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 20/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 20: rtl8192c-trx.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 21/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 21: rtl8192c-def.h, rtl8192-reg.h, and Makefile Larry Finger
2010-12-08 17:12 ` [PATCH 22/22] rtl8192ce: Part 22: Update drivers/net/wireless/Kconfig " Larry Finger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291828372-25159-19-git-send-email-Larry.Finger@lwfinger.net \
--to=larry.finger@lwfinger.net \
--cc=chaoming_li@realsil.com.cn \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.