From: Larry Finger <Larry.Finger@lwfinger.net>
To: linville@tuxdriver.com
Cc: linux-wireless@vger.kernel.org, chaoming_li@realsil.com.cn,
Larry Finger <Larry.Finger@lwfinger.net>
Subject: [PATCH 07/22] rtl8192ce: Add files to rtlwifi - Part 7: ps.{c,h}
Date: Wed, 8 Dec 2010 11:12:37 -0600 [thread overview]
Message-ID: <1291828372-25159-8-git-send-email-Larry.Finger@lwfinger.net> (raw)
In-Reply-To: <1291828372-25159-1-git-send-email-Larry.Finger@lwfinger.net>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
---
drivers/net/wireless/rtlwifi/ps.c | 492 +++++++++++++++++++++++++++++++++++++
drivers/net/wireless/rtlwifi/ps.h | 43 ++++
2 files changed, 535 insertions(+), 0 deletions(-)
create mode 100644 drivers/net/wireless/rtlwifi/ps.c
create mode 100644 drivers/net/wireless/rtlwifi/ps.h
diff --git a/drivers/net/wireless/rtlwifi/ps.c b/drivers/net/wireless/rtlwifi/ps.c
new file mode 100644
index 0000000..fd77cd5
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/ps.c
@@ -0,0 +1,492 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#include "wifi.h"
+#include "base.h"
+#include "ps.h"
+
+bool rtl_ps_enable_nic(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ bool init_status = true;
+
+ /*<1> reset trx ring */
+ if (rtlhal->interface == INTF_PCI)
+ rtlpriv->intf_ops->reset_trx_ring(hw);
+
+ if (is_hal_stop(rtlhal))
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ ("Driver is already down!\n"));
+
+ /*<2> Enable Adapter */
+ rtlpriv->cfg->ops->hw_init(hw);
+ RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_HALT_NIC);
+ /*init_status = false; */
+
+ /*<3> Enable Interrupt */
+ rtlpriv->cfg->ops->enable_interrupt(hw);
+
+ /*<enable timer> */
+ rtl_watch_dog_timer_callback((unsigned long)hw);
+
+ return init_status;
+}
+EXPORT_SYMBOL(rtl_ps_enable_nic);
+
+bool rtl_ps_disable_nic(struct ieee80211_hw *hw)
+{
+ bool status = true;
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ /*<1> Stop all timer */
+ rtl_deinit_deferred_work(hw);
+
+ /*<2> Disable Interrupt */
+ rtlpriv->cfg->ops->disable_interrupt(hw);
+
+ /*<3> Disable Adapter */
+ rtlpriv->cfg->ops->hw_disable(hw);
+
+ return status;
+}
+EXPORT_SYMBOL(rtl_ps_disable_nic);
+
+bool rtl_ps_set_rf_state(struct ieee80211_hw *hw,
+ enum rf_pwrstate state_toset,
+ u32 changesource, bool protect_or_not)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ enum rf_pwrstate rtstate;
+ bool b_actionallowed = false;
+ u16 rfwait_cnt = 0;
+ unsigned long flag;
+
+ /*protect_or_not = true; */
+
+ if (protect_or_not)
+ goto no_protect;
+
+ /*
+ *Only one thread can change
+ *the RF state at one time, and others
+ *should wait to be executed.
+ */
+ while (true) {
+ spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+ if (ppsc->rfchange_inprogress) {
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock,
+ flag);
+
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ ("RF Change in progress!"
+ "Wait to set..state_toset(%d).\n",
+ state_toset));
+
+ /* Set RF after the previous action is done. */
+ while (ppsc->rfchange_inprogress) {
+ rfwait_cnt++;
+ mdelay(1);
+
+ /*
+ *Wait too long, return false to avoid
+ *to be stuck here.
+ */
+ if (rfwait_cnt > 100)
+ return false;
+ }
+ } else {
+ ppsc->rfchange_inprogress = true;
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock,
+ flag);
+ break;
+ }
+ }
+
+no_protect:
+ rtstate = ppsc->rfpwr_state;
+
+ switch (state_toset) {
+ case ERFON:
+ ppsc->rfoff_reason &= (~changesource);
+
+ if ((changesource == RF_CHANGE_BY_HW) &&
+ (ppsc->b_hwradiooff == true)) {
+ ppsc->b_hwradiooff = false;
+ }
+
+ if (!ppsc->rfoff_reason) {
+ ppsc->rfoff_reason = 0;
+ b_actionallowed = true;
+ }
+
+ break;
+
+ case ERFOFF:
+
+ if ((changesource == RF_CHANGE_BY_HW)
+ && (ppsc->b_hwradiooff == false)) {
+ ppsc->b_hwradiooff = true;
+ }
+
+ ppsc->rfoff_reason |= changesource;
+ b_actionallowed = true;
+ break;
+
+ case ERFSLEEP:
+ ppsc->rfoff_reason |= changesource;
+ b_actionallowed = true;
+ break;
+
+ default:
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
+ ("switch case not process\n"));
+ break;
+ }
+
+ if (b_actionallowed)
+ rtlpriv->cfg->ops->set_rf_power_state(hw, state_toset);
+
+ if (!protect_or_not) {
+ spin_lock_irqsave(&rtlpriv->locks.rf_ps_lock, flag);
+ ppsc->rfchange_inprogress = false;
+ spin_unlock_irqrestore(&rtlpriv->locks.rf_ps_lock, flag);
+ }
+
+ return b_actionallowed;
+}
+EXPORT_SYMBOL(rtl_ps_set_rf_state);
+
+static void _rtl_ps_inactive_ps(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+
+ ppsc->b_swrf_processing = true;
+
+ if (ppsc->inactive_pwrstate == ERFON && rtlhal->interface == INTF_PCI) {
+ if ((ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) &&
+ RT_IN_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM) &&
+ rtlhal->interface == INTF_PCI) {
+ rtlpriv->intf_ops->disable_aspm(hw);
+ RT_CLEAR_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
+ }
+ }
+
+ rtl_ps_set_rf_state(hw, ppsc->inactive_pwrstate,
+ RF_CHANGE_BY_IPS, false);
+
+ if (ppsc->inactive_pwrstate == ERFOFF &&
+ rtlhal->interface == INTF_PCI) {
+ if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_ASPM) {
+ rtlpriv->intf_ops->enable_aspm(hw);
+ RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_ASPM);
+ }
+ }
+
+ ppsc->b_swrf_processing = false;
+}
+
+void rtl_ips_nic_off_wq_callback(void *data)
+{
+ struct rtl_works *rtlworks =
+ container_of_dwork_rtl(data, struct rtl_works, ips_nic_off_wq);
+ struct ieee80211_hw *hw = rtlworks->hw;
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ enum rf_pwrstate rtstate;
+
+ if (mac->opmode != NL80211_IFTYPE_STATION) {
+ RT_TRACE(rtlpriv, COMP_ERR, DBG_WARNING,
+ ("not station return\n"));
+ return;
+ }
+
+ if (is_hal_stop(rtlhal))
+ return;
+
+ if (rtlpriv->sec.being_setkey)
+ return;
+
+ if (ppsc->b_inactiveps) {
+ rtstate = ppsc->rfpwr_state;
+
+ /*
+ *Do not enter IPS in the following conditions:
+ *(1) RF is already OFF or Sleep
+ *(2) b_swrf_processing (indicates the IPS is still under going)
+ *(3) Connectted (only disconnected can trigger IPS)
+ *(4) IBSS (send Beacon)
+ *(5) AP mode (send Beacon)
+ *(6) monitor mode (rcv packet)
+ */
+
+ if (rtstate == ERFON &&
+ !ppsc->b_swrf_processing &&
+ (mac->link_state == MAC80211_NOLINK) &&
+ !mac->act_scanning) {
+ RT_TRACE(rtlpriv, COMP_RF, DBG_TRACE,
+ ("IPSEnter(): Turn off RF.\n"));
+
+ ppsc->inactive_pwrstate = ERFOFF;
+ ppsc->b_in_powersavemode = true;
+
+ /*rtl_pci_reset_trx_ring(hw); */
+ _rtl_ps_inactive_ps(hw);
+ }
+ }
+}
+
+void rtl_ips_nic_off(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+
+ /*
+ *because when link with ap, mac80211 will ask us
+ *to disable nic quickly after scan before linking,
+ *this will cause link failed, so we delay 100ms here
+ */
+ queue_delayed_work(rtlpriv->works.rtl_wq,
+ &rtlpriv->works.ips_nic_off_wq, MSECS(100));
+}
+
+void rtl_ips_nic_on(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ enum rf_pwrstate rtstate;
+
+ down(&rtlpriv->locks.ips_sem);
+
+ if (ppsc->b_inactiveps) {
+ rtstate = ppsc->rfpwr_state;
+
+ if (rtstate != ERFON &&
+ !ppsc->b_swrf_processing &&
+ ppsc->rfoff_reason <= RF_CHANGE_BY_IPS) {
+
+ ppsc->inactive_pwrstate = ERFON;
+ ppsc->b_in_powersavemode = false;
+
+ _rtl_ps_inactive_ps(hw);
+ }
+ }
+
+ up(&rtlpriv->locks.ips_sem);
+}
+
+/*for FW LPS*/
+
+/*
+ *Determine if we can set Fw into PS mode
+ *in current condition.Return TRUE if it
+ *can enter PS mode.
+ */
+static bool rtl_get_fwlps_doze(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ u32 ps_timediff;
+
+ ps_timediff = jiffies_to_msecs(jiffies -
+ ppsc->last_delaylps_stamp_jiffies);
+
+ if (ps_timediff < 2000) {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("Delay enter Fw LPS for DHCP, ARP,"
+ " or EAPOL exchanging state.\n"));
+ return false;
+ }
+
+ if (mac->link_state != MAC80211_LINKED)
+ return false;
+
+ if (mac->opmode == NL80211_IFTYPE_ADHOC)
+ return false;
+
+ return true;
+}
+
+/* Change current and default preamble mode.*/
+static void rtl_lps_set_psmode(struct ieee80211_hw *hw, u8 rt_psmode)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ u8 rpwm_val, fw_pwrmode;
+
+ if (mac->opmode == NL80211_IFTYPE_ADHOC)
+ return;
+
+ if (mac->link_state != MAC80211_LINKED)
+ return;
+
+ if (ppsc->dot11_psmode == rt_psmode)
+ return;
+
+ /* Update power save mode configured. */
+ ppsc->dot11_psmode = rt_psmode;
+
+ /*
+ *<FW control LPS>
+ *1. Enter PS mode
+ * Set RPWM to Fw to turn RF off and send H2C fw_pwrmode
+ * cmd to set Fw into PS mode.
+ *2. Leave PS mode
+ * Send H2C fw_pwrmode cmd to Fw to set Fw into Active
+ * mode and set RPWM to turn RF on.
+ */
+
+ if ((ppsc->b_fwctrl_lps) && (ppsc->b_leisure_ps) &&
+ ppsc->report_linked) {
+ bool b_fw_current_inps;
+ if (ppsc->dot11_psmode == EACTIVE) {
+ RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+ ("FW LPS leave ps_mode:%x\n",
+ FW_PS_ACTIVE_MODE));
+
+ rpwm_val = 0x0C; /* RF on */
+ fw_pwrmode = FW_PS_ACTIVE_MODE;
+ rtlpriv->cfg->ops->set_hw_reg(hw, HW_VAR_SET_RPWM,
+ (u8 *) (&rpwm_val));
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_H2C_FW_PWRMODE,
+ (u8 *) (&fw_pwrmode));
+ b_fw_current_inps = false;
+
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_FW_PSMODE_STATUS,
+ (u8 *) (&b_fw_current_inps));
+
+ } else {
+ if (rtl_get_fwlps_doze(hw)) {
+ RT_TRACE(rtlpriv, COMP_RF, DBG_DMESG,
+ ("FW LPS enter ps_mode:%x\n",
+ ppsc->fwctrl_psmode));
+
+ rpwm_val = 0x02; /* RF off */
+ b_fw_current_inps = true;
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_FW_PSMODE_STATUS,
+ (u8 *) (&b_fw_current_inps));
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_H2C_FW_PWRMODE,
+ (u8 *) (&ppsc->fwctrl_psmode));
+
+ rtlpriv->cfg->ops->set_hw_reg(hw,
+ HW_VAR_SET_RPWM,
+ (u8 *) (&rpwm_val));
+ } else {
+ /* Reset the power save related parameters. */
+ ppsc->dot11_psmode = EACTIVE;
+ }
+ }
+ }
+}
+
+/*Enter the leisure power save mode.*/
+void rtl_lps_enter(struct ieee80211_hw *hw)
+{
+ struct rtl_mac *mac = rtl_mac(rtl_priv(hw));
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ unsigned long flag;
+
+ if (!(ppsc->b_fwctrl_lps && ppsc->b_leisure_ps))
+ return;
+
+ if (rtlpriv->sec.being_setkey)
+ return;
+
+ if (rtlpriv->link_info.b_busytraffic)
+ return;
+
+ /*sleep after linked 10s, to let DHCP and 4-way handshake ok enough!! */
+ if (mac->cnt_after_linked < 5)
+ return;
+
+ if (mac->opmode == NL80211_IFTYPE_ADHOC)
+ return;
+
+ if (mac->link_state != MAC80211_LINKED)
+ return;
+
+ spin_lock_irqsave(&rtlpriv->locks.lps_lock, flag);
+
+ if (ppsc->b_leisure_ps) {
+ /* Idle for a while if we connect to AP a while ago. */
+ if (mac->cnt_after_linked >= 2) {
+ if (ppsc->dot11_psmode == EACTIVE) {
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("Enter 802.11 power save mode...\n"));
+
+ rtl_lps_set_psmode(hw, EAUTOPS);
+ }
+ }
+ }
+ spin_unlock_irqrestore(&rtlpriv->locks.lps_lock, flag);
+}
+
+/*Leave the leisure power save mode.*/
+void rtl_lps_leave(struct ieee80211_hw *hw)
+{
+ struct rtl_priv *rtlpriv = rtl_priv(hw);
+ struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw));
+ struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw));
+ unsigned long flag;
+
+ spin_lock_irqsave(&rtlpriv->locks.lps_lock, flag);
+
+ if (ppsc->b_fwctrl_lps && ppsc->b_leisure_ps) {
+ if (ppsc->dot11_psmode != EACTIVE) {
+
+ /*FIX ME */
+ rtlpriv->cfg->ops->enable_interrupt(hw);
+
+ if (ppsc->reg_rfps_level & RT_RF_LPS_LEVEL_ASPM &&
+ RT_IN_PS_LEVEL(ppsc, RT_RF_LPS_LEVEL_ASPM) &&
+ rtlhal->interface == INTF_PCI) {
+ rtlpriv->intf_ops->disable_aspm(hw);
+ RT_CLEAR_PS_LEVEL(ppsc, RT_RF_LPS_LEVEL_ASPM);
+ }
+
+ RT_TRACE(rtlpriv, COMP_POWER, DBG_LOUD,
+ ("Busy Traffic,Leave 802.11 power save..\n"));
+
+ rtl_lps_set_psmode(hw, EACTIVE);
+ }
+ }
+ spin_unlock_irqrestore(&rtlpriv->locks.lps_lock, flag);
+}
diff --git a/drivers/net/wireless/rtlwifi/ps.h b/drivers/net/wireless/rtlwifi/ps.h
new file mode 100644
index 0000000..ae56da8
--- /dev/null
+++ b/drivers/net/wireless/rtlwifi/ps.h
@@ -0,0 +1,43 @@
+/******************************************************************************
+ *
+ * Copyright(c) 2009-2010 Realtek Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of version 2 of the GNU General Public License as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
+ *
+ * The full GNU General Public License is included in this distribution in the
+ * file called LICENSE.
+ *
+ * Contact Information:
+ * wlanfae <wlanfae@realtek.com>
+ * Realtek Corporation, No. 2, Innovation Road II, Hsinchu Science Park,
+ * Hsinchu 300, Taiwan.
+ *
+ * Larry Finger <Larry.Finger@lwfinger.net>
+ *
+ *****************************************************************************/
+
+#ifndef __REALTEK_RTL_PCI_PS_H__
+#define __REALTEK_RTL_PCI_PS_H__
+
+bool rtl_ps_set_rf_state(struct ieee80211_hw *hw,
+ enum rf_pwrstate state_toset, u32 changesource,
+ bool protect_or_not);
+bool rtl_ps_enable_nic(struct ieee80211_hw *hw);
+bool rtl_ps_disable_nic(struct ieee80211_hw *hw);
+void rtl_ips_nic_off(struct ieee80211_hw *hw);
+void rtl_ips_nic_on(struct ieee80211_hw *hw);
+void rtl_ips_nic_off_wq_callback(void *data);
+void rtl_lps_enter(struct ieee80211_hw *hw);
+void rtl_lps_leave(struct ieee80211_hw *hw);
+#endif
--
1.7.1
next prev parent reply other threads:[~2010-12-08 17:20 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-08 17:12 [PATCH 00/22] rtl8192ce: Initial upload of driver Larry Finger
2010-12-08 17:12 ` [PATCH 01/22] rtl8192ce: Add files to rtlwifi - Part 1: core.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 02/22] rtl8192ce: Add files to rtlwifi - Part 2: base.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 03/22] rtl8192ce: Add files to rtlwifi - Part 3: cam.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 04/22] rtl8192ce: Add files to rtlwifi - Part 4: debug.{c,h} Larry Finger
2011-01-25 4:10 ` [PATCH] fix_rtlwifi_rfkill_state_not_synchronous_with_true_rfstate_issue 李朝明
2011-01-25 5:08 ` 李朝明
2011-01-26 17:34 ` Larry Finger
2010-12-08 17:12 ` [PATCH 05/22] rtl8192ce: Add files to rtlwifi - Part 5: efuse.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 06/22] rtl8192ce: Add files to rtlwifi - Part 6: pci.{c,h} Larry Finger
2010-12-08 17:12 ` Larry Finger [this message]
2010-12-08 17:12 ` [PATCH 08/22] rtl8192ce: Add files to rtlwifi - Part 8: rc.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 09/22] rtl8192ce: Add files to rtlwifi - Part 9: regd.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 10/22] rtl8192ce: Add files to rtlwifi - Part 10: wifi.h Larry Finger
2010-12-08 17:12 ` [PATCH 11/22] rtl8192ce: Add files to rtlwifi - Part 11: Kconfig and Makefile Larry Finger
2010-12-08 17:12 ` [PATCH 12/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 12: rtl8192c-dm.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 13/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 13: rtl8192c-fw.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 14/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 14: rtl8192c-hw.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 15/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 15: rtl8192c-led.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 16/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 16: rtl8192c-phy.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 17/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 17: rtl8192c-sw.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 18/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 18: rtl8192c-rf.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 19/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 19: rtl8192c-table.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 20/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 20: rtl8192c-trx.{c,h} Larry Finger
2010-12-08 17:12 ` [PATCH 21/22] rtl8192ce: Add files to rtlwifi/rtl8192ce - Part 21: rtl8192c-def.h, rtl8192-reg.h, and Makefile Larry Finger
2010-12-08 17:12 ` [PATCH 22/22] rtl8192ce: Part 22: Update drivers/net/wireless/Kconfig " Larry Finger
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291828372-25159-8-git-send-email-Larry.Finger@lwfinger.net \
--to=larry.finger@lwfinger.net \
--cc=chaoming_li@realsil.com.cn \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.