From: Sahitya Tummala <stummala@codeaurora.org>
To: davidb@codeaurora.org
Cc: dwalker@codeaurora.org, linux-arm-msm@vger.kernel.org,
linux-mmc@vger.kernel.org, san@google.com,
Sahitya Tummala <stummala@codeaurora.org>
Subject: [PATCH 1/2] mmc: msm_sdcc: Add gpio handling function to driver
Date: Tue, 18 Jan 2011 11:22:49 +0530 [thread overview]
Message-ID: <1295329970-26814-1-git-send-email-stummala@codeaurora.org> (raw)
Configure SDCC GPIOs when the host is powered up or powered off.
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
---
arch/arm/mach-msm/include/mach/mmc.h | 11 +++++++++
drivers/mmc/host/msm_sdcc.c | 40 +++++++++++++++++++++++++++++++++-
drivers/mmc/host/msm_sdcc.h | 1 +
3 files changed, 51 insertions(+), 1 deletions(-)
diff --git a/arch/arm/mach-msm/include/mach/mmc.h b/arch/arm/mach-msm/include/mach/mmc.h
index d54b6b0..5631b51 100644
--- a/arch/arm/mach-msm/include/mach/mmc.h
+++ b/arch/arm/mach-msm/include/mach/mmc.h
@@ -15,12 +15,23 @@ struct embedded_sdio_data {
int num_funcs;
};
+struct msm_mmc_gpio {
+ unsigned no;
+ const char *name;
+};
+
+struct msm_mmc_gpio_data {
+ struct msm_mmc_gpio *gpio;
+ u8 size;
+};
+
struct msm_mmc_platform_data {
unsigned int ocr_mask; /* available voltages */
u32 (*translate_vdd)(struct device *, unsigned int);
unsigned int (*status)(struct device *);
struct embedded_sdio_data *embedded_sdio;
int (*register_status_notify)(void (*callback)(int card_present, void *dev_id), void *dev_id);
+ struct msm_mmc_gpio_data *gpio_data;
};
#endif
diff --git a/drivers/mmc/host/msm_sdcc.c b/drivers/mmc/host/msm_sdcc.c
index 5decfd0..f50f6bb 100644
--- a/drivers/mmc/host/msm_sdcc.c
+++ b/drivers/mmc/host/msm_sdcc.c
@@ -36,6 +36,7 @@
#include <linux/io.h>
#include <linux/memory.h>
#include <linux/gfp.h>
+#include <linux/gpio.h>
#include <asm/cacheflush.h>
#include <asm/div64.h>
@@ -946,6 +947,38 @@ msmsdcc_request(struct mmc_host *mmc, struct mmc_request *mrq)
spin_unlock_irqrestore(&host->lock, flags);
}
+static void msmsdcc_setup_gpio(struct msmsdcc_host *host, bool enable)
+{
+ struct msm_mmc_gpio_data *curr;
+ int i, rc = 0;
+
+ if (!host->plat->gpio_data && host->gpio_config_status == enable)
+ return;
+
+ curr = host->plat->gpio_data;
+ for (i = 0; i < curr->size; i++) {
+ if (enable) {
+ rc = gpio_request(curr->gpio[i].no,
+ curr->gpio[i].name);
+ if (rc) {
+ pr_err("%s: gpio_request(%d, %s) failed %d\n",
+ mmc_hostname(host->mmc),
+ curr->gpio[i].no,
+ curr->gpio[i].name, rc);
+ goto free_gpios;
+ }
+ } else {
+ gpio_free(curr->gpio[i].no);
+ }
+ }
+ host->gpio_config_status = enable;
+ return;
+
+free_gpios:
+ for (; i >= 0; i--)
+ gpio_free(curr->gpio[i].no);
+}
+
static void
msmsdcc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
@@ -958,6 +991,8 @@ msmsdcc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
msmsdcc_enable_clocks(host);
+ spin_unlock_irqrestore(&host->lock, flags);
+
if (ios->clock) {
if (ios->clock != host->clk_rate) {
rc = clk_set_rate(host->clk, ios->clock);
@@ -984,9 +1019,11 @@ msmsdcc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
switch (ios->power_mode) {
case MMC_POWER_OFF:
+ msmsdcc_setup_gpio(host, false);
break;
case MMC_POWER_UP:
pwr |= MCI_PWR_UP;
+ msmsdcc_setup_gpio(host, true);
break;
case MMC_POWER_ON:
pwr |= MCI_PWR_ON;
@@ -1003,9 +1040,10 @@ msmsdcc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
msmsdcc_writel(host, pwr, MMCIPOWER);
}
#if BUSCLK_PWRSAVE
+ spin_lock_irqsave(&host->lock, flags);
msmsdcc_disable_clocks(host, 1);
-#endif
spin_unlock_irqrestore(&host->lock, flags);
+#endif
}
static void msmsdcc_enable_sdio_irq(struct mmc_host *mmc, int enable)
diff --git a/drivers/mmc/host/msm_sdcc.h b/drivers/mmc/host/msm_sdcc.h
index 939557a..42d7bbc 100644
--- a/drivers/mmc/host/msm_sdcc.h
+++ b/drivers/mmc/host/msm_sdcc.h
@@ -243,6 +243,7 @@ struct msmsdcc_host {
unsigned int cmd_datactrl;
struct mmc_command *cmd_cmd;
u32 cmd_c;
+ bool gpio_config_status;
bool prog_scan;
bool prog_enable;
--
1.7.1
--
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next reply other threads:[~2011-01-18 5:53 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-18 5:52 Sahitya Tummala [this message]
2011-01-18 5:52 ` [PATCH 2/2] msm: 8x50: Add initial support for SDCC Sahitya Tummala
2011-01-18 7:08 ` Trilok Soni
2011-01-18 20:28 ` David Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295329970-26814-1-git-send-email-stummala@codeaurora.org \
--to=stummala@codeaurora.org \
--cc=davidb@codeaurora.org \
--cc=dwalker@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=san@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.