From: Sahitya Tummala <stummala@codeaurora.org>
To: davidb@codeaurora.org
Cc: dwalker@codeaurora.org, linux-arm-msm@vger.kernel.org,
linux-mmc@vger.kernel.org, san@google.com,
Sahitya Tummala <stummala@codeaurora.org>
Subject: [PATCH 2/2] msm: 8x50: Add initial support for SDCC
Date: Tue, 18 Jan 2011 11:22:50 +0530 [thread overview]
Message-ID: <1295329970-26814-2-git-send-email-stummala@codeaurora.org> (raw)
In-Reply-To: <1295329970-26814-1-git-send-email-stummala@codeaurora.org>
Signed-off-by: Sahitya Tummala <stummala@codeaurora.org>
---
arch/arm/mach-msm/board-qsd8x50.c | 81 +++++++++-
arch/arm/mach-msm/devices-qsd8x50.c | 196 +++++++++++++++++++++++
arch/arm/mach-msm/gpiomux-8x50.c | 23 +++
arch/arm/mach-msm/include/mach/msm_iomap-8x50.h | 8 +-
4 files changed, 303 insertions(+), 5 deletions(-)
diff --git a/arch/arm/mach-msm/board-qsd8x50.c b/arch/arm/mach-msm/board-qsd8x50.c
index 6dde818..29ef683 100644
--- a/arch/arm/mach-msm/board-qsd8x50.c
+++ b/arch/arm/mach-msm/board-qsd8x50.c
@@ -1,4 +1,4 @@
-/* Copyright (c) 2008-2009, Code Aurora Forum. All rights reserved.
+/* Copyright (c) 2009-2011, Code Aurora Forum. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 and
@@ -21,6 +21,7 @@
#include <linux/platform_device.h>
#include <linux/delay.h>
#include <linux/usb/msm_hsusb.h>
+#include <linux/err.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
@@ -31,6 +32,8 @@
#include <mach/irqs.h>
#include <mach/sirc.h>
#include <mach/gpio.h>
+#include <mach/vreg.h>
+#include <mach/mmc.h>
#include "devices.h"
@@ -95,6 +98,81 @@ static struct platform_device *devices[] __initdata = {
&msm_device_hsusb_host,
};
+static struct msm_mmc_gpio sdc1_gpio_cfg[] = {
+ {51, "sdc1_dat_3"},
+ {52, "sdc1_dat_2"},
+ {53, "sdc1_dat_1"},
+ {54, "sdc1_dat_0"},
+ {55, "sdc1_cmd"},
+ {56, "sdc1_clk"}
+};
+
+static struct vreg *vreg_mmc;
+static unsigned long vreg_sts;
+
+static uint32_t msm_sdcc_setup_power(struct device *dv, unsigned int vdd)
+{
+ int rc = 0;
+ struct platform_device *pdev;
+
+ pdev = container_of(dv, struct platform_device, dev);
+
+ if (vdd == 0) {
+ if (!vreg_sts)
+ return 0;
+
+ clear_bit(pdev->id, &vreg_sts);
+
+ if (!vreg_sts) {
+ rc = vreg_disable(vreg_mmc);
+ if (rc)
+ pr_err("vreg_mmc disable failed for slot "
+ "%d: %d\n", pdev->id, rc);
+ }
+ return 0;
+ }
+
+ if (!vreg_sts) {
+ rc = vreg_set_level(vreg_mmc, 2900);
+ if (rc)
+ pr_err("vreg_mmc set level failed for slot %d: %d\n",
+ pdev->id, rc);
+ rc = vreg_enable(vreg_mmc);
+ if (rc)
+ pr_err("vreg_mmc enable failed for slot %d: %d\n",
+ pdev->id, rc);
+ }
+ set_bit(pdev->id, &vreg_sts);
+ return 0;
+}
+
+static struct msm_mmc_gpio_data sdc1_gpio = {
+ .gpio = sdc1_gpio_cfg,
+ .size = ARRAY_SIZE(sdc1_gpio_cfg),
+};
+
+static struct msm_mmc_platform_data qsd8x50_sdc1_data = {
+ .ocr_mask = MMC_VDD_27_28 | MMC_VDD_28_29,
+ .translate_vdd = msm_sdcc_setup_power,
+ .gpio_data = &sdc1_gpio,
+};
+
+static void __init qsd8x50_init_mmc(void)
+{
+ if (machine_is_qsd8x50_ffa() || machine_is_qsd8x50a_ffa())
+ vreg_mmc = vreg_get(NULL, "gp6");
+ else
+ vreg_mmc = vreg_get(NULL, "gp5");
+
+ if (IS_ERR(vreg_mmc)) {
+ pr_err("vreg get for vreg_mmc failed (%ld)\n",
+ PTR_ERR(vreg_mmc));
+ return;
+ }
+
+ msm_add_sdcc(1, &qsd8x50_sdc1_data, 0, 0);
+}
+
static void __init qsd8x50_map_io(void)
{
msm_map_qsd8x50_io();
@@ -113,6 +191,7 @@ static void __init qsd8x50_init(void)
msm_device_hsusb.dev.parent = &msm_device_otg.dev;
msm_device_hsusb_host.dev.parent = &msm_device_otg.dev;
platform_add_devices(devices, ARRAY_SIZE(devices));
+ qsd8x50_init_mmc();
}
MACHINE_START(QSD8X50_SURF, "QCT QSD8X50 SURF")
diff --git a/arch/arm/mach-msm/devices-qsd8x50.c b/arch/arm/mach-msm/devices-qsd8x50.c
index a4b798f..b1a8f0f 100644
--- a/arch/arm/mach-msm/devices-qsd8x50.c
+++ b/arch/arm/mach-msm/devices-qsd8x50.c
@@ -124,6 +124,194 @@ struct platform_device msm_device_hsusb_host = {
},
};
+static struct resource resources_sdc1[] = {
+ {
+ .start = MSM_SDC1_PHYS,
+ .end = MSM_SDC1_PHYS + MSM_SDC1_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_SDC1_0,
+ .end = INT_SDC1_0,
+ .flags = IORESOURCE_IRQ,
+ .name = "cmd_irq",
+ },
+ {
+ .start = INT_SDC1_1,
+ .end = INT_SDC1_1,
+ .flags = IORESOURCE_IRQ,
+ .name = "pio_irq",
+ },
+ {
+ .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
+ .name = "status_irq"
+ },
+ {
+ .start = 8,
+ .end = 8,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct resource resources_sdc2[] = {
+ {
+ .start = MSM_SDC2_PHYS,
+ .end = MSM_SDC2_PHYS + MSM_SDC2_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_SDC2_0,
+ .end = INT_SDC2_0,
+ .flags = IORESOURCE_IRQ,
+ .name = "cmd_irq",
+ },
+ {
+ .start = INT_SDC2_1,
+ .end = INT_SDC2_1,
+ .flags = IORESOURCE_IRQ,
+ .name = "pio_irq",
+ },
+ {
+ .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
+ .name = "status_irq"
+ },
+ {
+ .start = 8,
+ .end = 8,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct resource resources_sdc3[] = {
+ {
+ .start = MSM_SDC3_PHYS,
+ .end = MSM_SDC3_PHYS + MSM_SDC3_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_SDC3_0,
+ .end = INT_SDC3_0,
+ .flags = IORESOURCE_IRQ,
+ .name = "cmd_irq",
+ },
+ {
+ .start = INT_SDC3_1,
+ .end = INT_SDC3_1,
+ .flags = IORESOURCE_IRQ,
+ .name = "pio_irq",
+ },
+ {
+ .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
+ .name = "status_irq"
+ },
+ {
+ .start = 8,
+ .end = 8,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+static struct resource resources_sdc4[] = {
+ {
+ .start = MSM_SDC4_PHYS,
+ .end = MSM_SDC4_PHYS + MSM_SDC4_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = INT_SDC4_0,
+ .end = INT_SDC4_0,
+ .flags = IORESOURCE_IRQ,
+ .name = "cmd_irq",
+ },
+ {
+ .start = INT_SDC4_1,
+ .end = INT_SDC4_1,
+ .flags = IORESOURCE_IRQ,
+ .name = "pio_irq",
+ },
+ {
+ .flags = IORESOURCE_IRQ | IORESOURCE_DISABLED,
+ .name = "status_irq"
+ },
+ {
+ .start = 8,
+ .end = 8,
+ .flags = IORESOURCE_DMA,
+ },
+};
+
+struct platform_device msm_device_sdc1 = {
+ .name = "msm_sdcc",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(resources_sdc1),
+ .resource = resources_sdc1,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+struct platform_device msm_device_sdc2 = {
+ .name = "msm_sdcc",
+ .id = 2,
+ .num_resources = ARRAY_SIZE(resources_sdc2),
+ .resource = resources_sdc2,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+struct platform_device msm_device_sdc3 = {
+ .name = "msm_sdcc",
+ .id = 3,
+ .num_resources = ARRAY_SIZE(resources_sdc3),
+ .resource = resources_sdc3,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+struct platform_device msm_device_sdc4 = {
+ .name = "msm_sdcc",
+ .id = 4,
+ .num_resources = ARRAY_SIZE(resources_sdc4),
+ .resource = resources_sdc4,
+ .dev = {
+ .coherent_dma_mask = 0xffffffff,
+ },
+};
+
+static struct platform_device *msm_sdcc_devices[] __initdata = {
+ &msm_device_sdc1,
+ &msm_device_sdc2,
+ &msm_device_sdc3,
+ &msm_device_sdc4,
+};
+
+int __init msm_add_sdcc(unsigned int controller,
+ struct msm_mmc_platform_data *plat,
+ unsigned int stat_irq, unsigned long stat_irq_flags)
+{
+ struct platform_device *pdev;
+ struct resource *res;
+
+ if (controller < 1 || controller > 4)
+ return -EINVAL;
+
+ pdev = msm_sdcc_devices[controller-1];
+ pdev->dev.platform_data = plat;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_IRQ, "status_irq");
+ if (!res)
+ return -EINVAL;
+ else if (stat_irq) {
+ res->start = res->end = stat_irq;
+ res->flags &= ~IORESOURCE_DISABLED;
+ res->flags |= stat_irq_flags;
+ }
+
+ return platform_device_register(pdev);
+}
+
struct clk msm_clocks_8x50[] = {
CLK_PCOM("adm_clk", ADM_CLK, NULL, 0),
CLK_PCOM("ebi1_clk", EBI1_CLK, NULL, CLK_MIN),
@@ -144,6 +332,14 @@ struct clk msm_clocks_8x50[] = {
CLK_PCOM("pbus_clk", PBUS_CLK, NULL, CLK_MIN),
CLK_PCOM("pcm_clk", PCM_CLK, NULL, 0),
CLK_PCOM("sdac_clk", SDAC_CLK, NULL, OFF),
+ CLK_PCOM("sdc_clk", SDC1_CLK, &msm_device_sdc1.dev, OFF),
+ CLK_PCOM("sdc_pclk", SDC1_P_CLK, &msm_device_sdc1.dev, OFF),
+ CLK_PCOM("sdc_clk", SDC2_CLK, &msm_device_sdc2.dev, OFF),
+ CLK_PCOM("sdc_pclk", SDC2_P_CLK, &msm_device_sdc2.dev, OFF),
+ CLK_PCOM("sdc_clk", SDC3_CLK, &msm_device_sdc3.dev, OFF),
+ CLK_PCOM("sdc_pclk", SDC3_P_CLK, &msm_device_sdc3.dev, OFF),
+ CLK_PCOM("sdc_clk", SDC4_CLK, &msm_device_sdc4.dev, OFF),
+ CLK_PCOM("sdc_pclk", SDC4_P_CLK, &msm_device_sdc4.dev, OFF),
CLK_PCOM("spi_clk", SPI_CLK, NULL, 0),
CLK_PCOM("tsif_clk", TSIF_CLK, NULL, 0),
CLK_PCOM("tsif_ref_clk", TSIF_REF_CLK, NULL, 0),
diff --git a/arch/arm/mach-msm/gpiomux-8x50.c b/arch/arm/mach-msm/gpiomux-8x50.c
index 4406e0f..f7a4ea5 100644
--- a/arch/arm/mach-msm/gpiomux-8x50.c
+++ b/arch/arm/mach-msm/gpiomux-8x50.c
@@ -16,6 +16,19 @@
*/
#include "gpiomux.h"
+#if defined(CONFIG_MMC_MSM) || defined(CONFIG_MMC_MSM_MODULE)
+ #define SDCC_DAT_0_3_CMD_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_UP\
+ | GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA)
+ #define SDCC_CLK_ACTV_CFG (GPIOMUX_VALID | GPIOMUX_PULL_NONE\
+ | GPIOMUX_FUNC_1 | GPIOMUX_DRV_8MA)
+#else
+ #define SDCC_DAT_0_3_CMD_ACTV_CFG 0
+ #define SDCC_CLK_ACTV_CFG 0
+#endif
+
+#define SDC1_SUSPEND_CONFIG (GPIOMUX_VALID | GPIOMUX_PULL_DOWN\
+ | GPIOMUX_FUNC_GPIO | GPIOMUX_DRV_2MA)
+
struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
[86] = { /* UART3 RX */
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
@@ -25,4 +38,14 @@ struct msm_gpiomux_config msm_gpiomux_configs[GPIOMUX_NGPIOS] = {
.suspended = GPIOMUX_DRV_2MA | GPIOMUX_PULL_DOWN |
GPIOMUX_FUNC_1 | GPIOMUX_VALID,
},
+ /* SDC1 data[3:0] & CMD */
+ [51 ... 55] = {
+ .active = SDCC_DAT_0_3_CMD_ACTV_CFG,
+ .suspended = SDC1_SUSPEND_CONFIG
+ },
+ /* SDC1 CLK */
+ [56] = {
+ .active = SDCC_CLK_ACTV_CFG,
+ .suspended = SDC1_SUSPEND_CONFIG
+ },
};
diff --git a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
index acc819e..732a965 100644
--- a/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
+++ b/arch/arm/mach-msm/include/mach/msm_iomap-8x50.h
@@ -132,16 +132,16 @@
#define MSM_UART2DM_PHYS 0xA0900000
-#define MSM_SDC1_PHYS 0xA0400000
+#define MSM_SDC1_PHYS 0xA0300000
#define MSM_SDC1_SIZE SZ_4K
-#define MSM_SDC2_PHYS 0xA0500000
+#define MSM_SDC2_PHYS 0xA0400000
#define MSM_SDC2_SIZE SZ_4K
-#define MSM_SDC3_PHYS 0xA0600000
+#define MSM_SDC3_PHYS 0xA0500000
#define MSM_SDC3_SIZE SZ_4K
-#define MSM_SDC4_PHYS 0xA0700000
+#define MSM_SDC4_PHYS 0xA0600000
#define MSM_SDC4_SIZE SZ_4K
#endif
--
1.7.1
--
Sent by a consultant of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2011-01-18 5:52 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-01-18 5:52 [PATCH 1/2] mmc: msm_sdcc: Add gpio handling function to driver Sahitya Tummala
2011-01-18 5:52 ` Sahitya Tummala [this message]
2011-01-18 7:08 ` [PATCH 2/2] msm: 8x50: Add initial support for SDCC Trilok Soni
2011-01-18 20:28 ` David Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1295329970-26814-2-git-send-email-stummala@codeaurora.org \
--to=stummala@codeaurora.org \
--cc=davidb@codeaurora.org \
--cc=dwalker@codeaurora.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=san@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.