* [PATCH] perf: Define make variables ARCH and SRCARCH consistently with Kbuild
@ 2011-03-06 22:08 Ben Hutchings
0 siblings, 0 replies; only message in thread
From: Ben Hutchings @ 2011-03-06 22:08 UTC (permalink / raw)
To: Peter Zijlstra, Paul Mackerras, Ingo Molnar,
Arnaldo Carvalho de Melo; +Cc: LKML
It is confusing to use RAW_ARCH/ARCH instead of ARCH/SRCARCH. The
current definitions also make it difficult to build for i386 on an
x86_64 host.
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
---
tools/perf/Makefile | 20 ++++++++------------
tools/perf/arch/arm/Makefile | 2 +-
tools/perf/arch/powerpc/Makefile | 2 +-
tools/perf/arch/s390/Makefile | 2 +-
tools/perf/arch/sh/Makefile | 2 +-
tools/perf/arch/sparc/Makefile | 2 +-
tools/perf/arch/x86/Makefile | 2 +-
7 files changed, 14 insertions(+), 18 deletions(-)
diff --git a/tools/perf/Makefile b/tools/perf/Makefile
index 7141c42..c5d09b0 100644
--- a/tools/perf/Makefile
+++ b/tools/perf/Makefile
@@ -174,19 +174,15 @@ uname_R := $(shell sh -c 'uname -r 2>/dev/null || echo not')
uname_P := $(shell sh -c 'uname -p 2>/dev/null || echo not')
uname_V := $(shell sh -c 'uname -v 2>/dev/null || echo not')
-ARCH ?= $(shell echo $(uname_M) | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ \
+ARCH ?= $(uname_M)
+SRCARCH := $(shell echo $(ARCH) | sed -e s/i.86/x86/ -e s/sun4u/sparc64/ \
-e s/arm.*/arm/ -e s/sa110/arm/ \
-e s/s390x/s390/ -e s/parisc64/parisc/ \
-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
- -e s/sh[234].*/sh/ )
+ -e s/sh[234].*/sh/ -e s/x86_64/x86/ )
-# Additional ARCH settings for x86
-ifeq ($(ARCH),i386)
- ARCH := x86
-endif
+# Additional ARCH settings for x86_64
ifeq ($(ARCH),x86_64)
- RAW_ARCH := x86_64
- ARCH := x86
ARCH_CFLAGS := -DARCH_X86_64
ARCH_INCLUDE = ../../arch/x86/lib/memcpy_64.S
endif
@@ -305,7 +301,7 @@ endif
# Those must not be GNU-specific; they are shared with perl/ which may
# be built by a different compiler. (Note that this is an artifact now
# but it still might be nice to keep that distinction.)
-BASIC_CFLAGS = -Iutil/include -Iarch/$(ARCH)/include
+BASIC_CFLAGS = -Iutil/include -Iarch/$(SRCARCH)/include
BASIC_LDFLAGS =
# Guard against environment variables
@@ -488,7 +484,7 @@ BUILTIN_OBJS += $(OUTPUT)builtin-bench.o
# Benchmark modules
BUILTIN_OBJS += $(OUTPUT)bench/sched-messaging.o
BUILTIN_OBJS += $(OUTPUT)bench/sched-pipe.o
-ifeq ($(RAW_ARCH),x86_64)
+ifeq ($(ARCH),x86_64)
BUILTIN_OBJS += $(OUTPUT)bench/mem-memcpy-x86-64-asm.o
endif
BUILTIN_OBJS += $(OUTPUT)bench/mem-memcpy.o
@@ -533,7 +529,7 @@ ifneq ($(call try-cc,$(SOURCE_DWARF),$(FLAGS_DWARF)),y)
endif # Dwarf support
endif # NO_DWARF
--include arch/$(ARCH)/Makefile
+-include arch/$(SRCARCH)/Makefile
ifeq ($(uname_S),Darwin)
ifndef NO_FINK
@@ -571,7 +567,7 @@ endif
ifndef NO_DWARF
ifeq ($(origin PERF_HAVE_DWARF_REGS), undefined)
- msg := $(warning DWARF register mappings have not been defined for architecture $(ARCH), DWARF support disabled);
+ msg := $(warning DWARF register mappings have not been defined for architecture $(SRCARCH), DWARF support disabled);
else
BASIC_CFLAGS += -DDWARF_SUPPORT
EXTLIBS += -lelf -ldw
diff --git a/tools/perf/arch/arm/Makefile b/tools/perf/arch/arm/Makefile
index 15130b5..571affa 100644
--- a/tools/perf/arch/arm/Makefile
+++ b/tools/perf/arch/arm/Makefile
@@ -1,4 +1,4 @@
ifndef NO_DWARF
PERF_HAVE_DWARF_REGS := 1
-LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
+LIB_OBJS += $(OUTPUT)arch/$(SRCARCH)/util/dwarf-regs.o
endif
diff --git a/tools/perf/arch/powerpc/Makefile b/tools/perf/arch/powerpc/Makefile
index 15130b5..571affa 100644
--- a/tools/perf/arch/powerpc/Makefile
+++ b/tools/perf/arch/powerpc/Makefile
@@ -1,4 +1,4 @@
ifndef NO_DWARF
PERF_HAVE_DWARF_REGS := 1
-LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
+LIB_OBJS += $(OUTPUT)arch/$(SRCARCH)/util/dwarf-regs.o
endif
diff --git a/tools/perf/arch/s390/Makefile b/tools/perf/arch/s390/Makefile
index 15130b5..571affa 100644
--- a/tools/perf/arch/s390/Makefile
+++ b/tools/perf/arch/s390/Makefile
@@ -1,4 +1,4 @@
ifndef NO_DWARF
PERF_HAVE_DWARF_REGS := 1
-LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
+LIB_OBJS += $(OUTPUT)arch/$(SRCARCH)/util/dwarf-regs.o
endif
diff --git a/tools/perf/arch/sh/Makefile b/tools/perf/arch/sh/Makefile
index 15130b5..571affa 100644
--- a/tools/perf/arch/sh/Makefile
+++ b/tools/perf/arch/sh/Makefile
@@ -1,4 +1,4 @@
ifndef NO_DWARF
PERF_HAVE_DWARF_REGS := 1
-LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
+LIB_OBJS += $(OUTPUT)arch/$(SRCARCH)/util/dwarf-regs.o
endif
diff --git a/tools/perf/arch/sparc/Makefile b/tools/perf/arch/sparc/Makefile
index 15130b5..571affa 100644
--- a/tools/perf/arch/sparc/Makefile
+++ b/tools/perf/arch/sparc/Makefile
@@ -1,4 +1,4 @@
ifndef NO_DWARF
PERF_HAVE_DWARF_REGS := 1
-LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
+LIB_OBJS += $(OUTPUT)arch/$(SRCARCH)/util/dwarf-regs.o
endif
diff --git a/tools/perf/arch/x86/Makefile b/tools/perf/arch/x86/Makefile
index 15130b5..571affa 100644
--- a/tools/perf/arch/x86/Makefile
+++ b/tools/perf/arch/x86/Makefile
@@ -1,4 +1,4 @@
ifndef NO_DWARF
PERF_HAVE_DWARF_REGS := 1
-LIB_OBJS += $(OUTPUT)arch/$(ARCH)/util/dwarf-regs.o
+LIB_OBJS += $(OUTPUT)arch/$(SRCARCH)/util/dwarf-regs.o
endif
--
1.7.4.1
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2011-03-06 22:08 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-03-06 22:08 [PATCH] perf: Define make variables ARCH and SRCARCH consistently with Kbuild Ben Hutchings
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.