From: Shirley Ma <mashirle@us.ibm.com>
To: "Michael S. Tsirkin" <mst@redhat.com>,
Rusty Russell <rusty@rustcorp.com.au>
Cc: David Miller <davem@davemloft.net>,
kvm@vger.kernel.org, netdev@vger.kernel.org
Subject: [PATCH 2/2] virtio_net: remove send completion interrupts and avoid TX queue overrun through packet drop
Date: Wed, 16 Mar 2011 17:12:55 -0700 [thread overview]
Message-ID: <1300320775.3255.34.camel@localhost.localdomain> (raw)
Signed-off-by: Shirley Ma <xma@us.ibm.com>
---
drivers/net/virtio_net.c | 39 ++++++++++++++++++++-------------------
1 files changed, 20 insertions(+), 19 deletions(-)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 82dba5a..c603daa 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -23,6 +23,7 @@
#include <linux/module.h>
#include <linux/virtio.h>
#include <linux/virtio_net.h>
+#include <linux/virtio_ring.h>
#include <linux/scatterlist.h>
#include <linux/if_vlan.h>
#include <linux/slab.h>
@@ -509,19 +510,18 @@ again:
return received;
}
-static unsigned int free_old_xmit_skbs(struct virtnet_info *vi)
+static void free_old_xmit_skbs(struct virtnet_info *vi)
{
struct sk_buff *skb;
- unsigned int len, tot_sgs = 0;
+ unsigned int len;
while ((skb = virtqueue_get_buf(vi->svq, &len)) != NULL) {
pr_debug("Sent skb %p\n", skb);
vi->dev->stats.tx_bytes += skb->len;
vi->dev->stats.tx_packets++;
- tot_sgs += skb_vnet_hdr(skb)->num_sg;
dev_kfree_skb_any(skb);
}
- return tot_sgs;
+ return;
}
static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
@@ -574,11 +574,26 @@ static int xmit_skb(struct virtnet_info *vi, struct sk_buff *skb)
static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)
{
struct virtnet_info *vi = netdev_priv(dev);
+ bool drop;
+ bool indirect = virtio_has_feature(vi->vdev,
+ VIRTIO_RING_F_INDIRECT_DESC);
int capacity;
/* Free up any pending old buffers before queueing new ones. */
free_old_xmit_skbs(vi);
-
+ capacity = virtqueue_get_capacity(vi->svq);
+
+ /* Drop packet instead of stop queue for better performance */
+ drop = (capacity == 0 && indirect) ||
+ ((capacity < MAX_SKB_FRAGS + 2) && !indirect);
+ if (unlikely(drop)) {
+ dev->stats.tx_fifo_errors++;
+ dev_warn(&dev->dev, "Unexpected TX queue failure: %d\n",
+ capacity);
+ dev->stats.tx_dropped++;
+ kfree_skb(skb);
+ return NETDEV_TX_OK;
+ }
/* Try to transmit */
capacity = xmit_skb(vi, skb);
@@ -605,20 +620,6 @@ static netdev_tx_t start_xmit(struct sk_buff *skb, struct net_device *dev)
skb_orphan(skb);
nf_reset(skb);
- /* Apparently nice girls don't return TX_BUSY; stop the queue
- * before it gets out of hand. Naturally, this wastes entries. */
- if (capacity < 2+MAX_SKB_FRAGS) {
- netif_stop_queue(dev);
- if (unlikely(!virtqueue_enable_cb(vi->svq))) {
- /* More just got used, free them then recheck. */
- capacity += free_old_xmit_skbs(vi);
- if (capacity >= 2+MAX_SKB_FRAGS) {
- netif_start_queue(dev);
- virtqueue_disable_cb(vi->svq);
- }
- }
- }
-
return NETDEV_TX_OK;
}
next reply other threads:[~2011-03-17 0:12 UTC|newest]
Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-17 0:12 Shirley Ma [this message]
2011-03-17 5:02 ` [PATCH 2/2] virtio_net: remove send completion interrupts and avoid TX queue overrun through packet drop Michael S. Tsirkin
2011-03-17 15:18 ` Shirley Ma
2011-03-18 3:28 ` Shirley Ma
2011-03-18 13:15 ` Michael S. Tsirkin
2011-03-18 16:54 ` Shirley Ma
2011-03-17 5:10 ` Rusty Russell
2011-03-17 15:10 ` Shirley Ma
2011-03-18 13:33 ` Herbert Xu
2011-03-19 1:41 ` Shirley Ma
2011-03-21 18:03 ` Shirley Ma
2011-03-22 11:36 ` Michael S. Tsirkin
2011-03-23 2:26 ` Shirley Ma
2011-03-24 0:30 ` Rusty Russell
2011-03-24 4:14 ` Shirley Ma
2011-03-24 14:28 ` Michael S. Tsirkin
2011-03-24 17:46 ` Shirley Ma
2011-03-24 18:10 ` Michael S. Tsirkin
2011-03-25 4:51 ` Rusty Russell
2011-03-25 4:50 ` Rusty Russell
2011-03-27 7:52 ` Michael S. Tsirkin
2011-04-04 6:13 ` Rusty Russell
2011-03-24 0:16 ` Rusty Russell
2011-03-24 6:39 ` Michael S. Tsirkin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1300320775.3255.34.camel@localhost.localdomain \
--to=mashirle@us.ibm.com \
--cc=davem@davemloft.net \
--cc=kvm@vger.kernel.org \
--cc=mst@redhat.com \
--cc=netdev@vger.kernel.org \
--cc=rusty@rustcorp.com.au \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.