From: Goncalo Gomes <Goncalo.Gomes@Eu.Citrix.Com>
To: xen-devel@lists.xensource.com
Subject: Xen 4.2 unstable + Jeremy's stable/2.6.32.x
Date: Thu, 24 Mar 2011 17:39:50 +0000 [thread overview]
Message-ID: <1300988390.2215.9.camel@eire> (raw)
[-- Attachment #1: Type: text/plain, Size: 978 bytes --]
I'm trying to setup an environment based on Lenny x86_64 + Xen4 Jeremy's
stable 2.6.32.x tree. I can see Xen booting up from the serial console
(logged and attached as dt29boot.log), however, it stops right after a
number of "PCI add device (...)" lines.
Not sure if relevant but as a part of my attempt at troubleshooting I
switched into Xen's serial input by pressing ctrl+a three times and
subsequently pressing 'Q'. Strangely, this seems to result in a list of
PCI devices that is larger than the number of reportedly added PCI
devices by Xen. Is this expected?
Any alternate hints and/or suggestions would be fairly welcome. I'm
attaching some relevant information about the HW in question.
Goncalo
grub entry
title Xen 4.2 unstable / 2.6.32.33
root (hd0,0)
kernel /boot/xen.gz com1=115200,8n1 console=com1,vga console_to_ring
module /boot/vmlinuz-xen root=/dev/sda1 ro console=tty0 xencons=hvc
console=hvc0 earlyprintk=xen
module /boot/initrd-xen
[-- Attachment #2: dt29boot.log --]
[-- Type: text/x-log, Size: 13358 bytes --]
Script started on Thu 24 Mar 2011 16:29:06 GMT
goncalog@eire:~$ xenuse -t dt29
[Enter `^Ec?' for help]
^[[m^[[7;3H Xen 4.2 unstable / 2.6.32.33 ^[[7;75H^[[m^[[m^[[7m^[[6;3H Debian GNU/Linux, kernel 2.6.26-2-amd64 (single-user mode) ^[[6;75H^[[m^[[m^[[6;3H Debian GNU/Linux, kernel 2.6.26-2-amd64 (single-user mode) ^[[6;75H^[[m^[[m^[[7m^[[7;3H Xen 4.2 unstable / 2.6.32.33 ^[[7;75H^[[m^[[H^[[J Booting 'Xen 4.2 unstable / 2.6.32.33'
root (hd0,0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/xen.gz com1=115200,8n1 console=com1,vga console_to_ring
[Multiboot-elf, <0x100000:0x188818:0x4c7e8>, shtab=0x2d5078, entry=0x100000]
module /boot/vmlinuz-xen root=/dev/sda1 ro console=tty0 xencons=hvc console=hv
c0 earlyprintk=xen
[Multiboot-module @ 0x2d6000, 0x23de30 bytes]
module /boot/initrd-xen
[Multiboot-module @ 0x514000, 0x12d7a00 bytes]
__ __ _ _ _ ___ __
\ \/ /___ _ __ | || | / | / _ \ _ __ ___ / /_ _ __ _ __ ___
\ // _ \ '_ \ | || |_ | || | | |__| '__/ __| '_ \ __| '_ \| '__/ _ \
/ \ __/ | | | |__ _|| || |_| |__| | | (__| (_) |__| |_) | | | __/
/_/\_\___|_| |_| |_|(_)_(_)___/ |_| \___|\___/ | .__/|_| \___|
|_|
(XEN) Xen version 4.1.0-rc6-pre (scara@) (gcc version 4.5.1 20100907 (Red Hat 4.5.1-3) (GCC) ) Thu Feb 24 13:39:16 GMT 2011
(XEN) Latest ChangeSet: Thu Feb 24 09:33:19 2011 +0000 22947:598d1fc295b6
(XEN) Bootloader: GNU GRUB 0.97
(XEN) Command line: com1=115200,8n1 console=com1,vga console_to_ring
(XEN) Video information:
(XEN) VGA is text mode 80x25, font 8x16
(XEN) VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN) EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN) Found 1 MBR signatures
(XEN) Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN) 0000000000000000 - 000000000009e000 (usable)
(XEN) 0000000000100000 - 00000000bf699000 (usable)
(XEN) 00000000bf699000 - 00000000bf6af000 (reserved)
(XEN) 00000000bf6af000 - 00000000bf6ce000 (ACPI data)
(XEN) 00000000bf6ce000 - 00000000c0000000 (reserved)
(XEN) 00000000e0000000 - 00000000f0000000 (reserved)
(XEN) 00000000fe000000 - 0000000100000000 (reserved)
(XEN) 0000000100000000 - 0000000240000000 (usable)
(XEN) ACPI: RSDP 000F0AA0, 0024 (r2 DELL )
(XEN) ACPI: XSDT 000F0BA0, 008C (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: FACP BF6C3BB4, 00F4 (r3 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: DSDT BF6AF000, 3E43 (r1 DELL PE_SC3 1 INTL 20050624)
(XEN) ACPI: FACS BF6C6000, 0040
(XEN) ACPI: APIC BF6C3478, 0152 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: SPCR BF6C35CC, 0050 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: HPET BF6C3620, 0038 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: DMAR BF6C365C, 00A8 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: MCFG BF6C3850, 003C (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: WD__ BF6C3890, 0134 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: SLIC BF6C39C8, 0024 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: ERST BF6B2FC4, 0270 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: HEST BF6B3234, 03A8 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: BERT BF6B2E44, 0030 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: EINJ BF6B2E74, 0150 (r1 DELL PE_SC3 1 DELL 1)
(XEN) ACPI: TCPA BF6C3B4C, 0064 (r2 DELL PE_SC3 1 DELL 1)
(XEN) System RAM: 8182MB (8378588kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000240000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000fe710
(XEN) DMI 2.6 present.
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x808
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[804,0], pm1x_evt[800,0]
(XEN) ACPI: wakeup_vec[bf6c600c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
(XEN) Processor #2 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
(XEN) Processor #4 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
(XEN) Processor #6 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
(XEN) Processor #1 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
(XEN) Processor #3 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
(XEN) Processor #5 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
(XEN) Processor #7 7:14 APIC version 21
(XEN) ACPI: LAPIC (acpi_id[0x09] lapic_id[0x28] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x29] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x2a] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x2b] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x2c] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x2d] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x2e] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x10] lapic_id[0x2f] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x11] lapic_id[0x30] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x12] lapic_id[0x31] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x13] lapic_id[0x32] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x14] lapic_id[0x33] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x15] lapic_id[0x34] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x16] lapic_id[0x35] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x17] lapic_id[0x36] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x18] lapic_id[0x37] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x19] lapic_id[0x38] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1a] lapic_id[0x39] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1b] lapic_id[0x3a] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1c] lapic_id[0x3b] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1d] lapic_id[0x3c] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1e] lapic_id[0x3d] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x1f] lapic_id[0x3e] disabled)
(XEN) ACPI: LAPIC (acpi_id[0x20] lapic_id[0x3f] disabled)
(XEN) ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
(XEN) ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ2 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) Enabling APIC mode: Flat. Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x8086a701 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: MCFG area at e0000000 reserved in E820
(XEN) ERST table is invalid
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) IRQ limits: 24 GSI, 1528 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2660.049 MHz processor.
(XEN) Initing memory sharing.
(XEN) mce_intel.c:1162: MCA Capability: BCAST 1 SER 0 CMCI 1 firstbank 0 extended MCE MSR 0
(XEN) Intel machine check reporting enabled
(XEN) Intel VT-d Snoop Control enabled.
(XEN) Intel VT-d Dom0 DMA Passthrough not enabled.
(XEN) Intel VT-d Queued Invalidation enabled.
(XEN) Intel VT-d Interrupt Remapping not enabled.
(XEN) I/O virtualisation enabled
(XEN) - Dom0 mode: Relaxed
(XEN) ENABLING IO-APIC IRQs
(XEN) -> Using new ACK method
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=2 apic2=-1 pin2=-1
(XEN) Platform timer is 14.318MHz HPET
XEN) Allocated console ring of 64 KiB.
(XEN) VMX: Supported advanced features:
(XEN) - APIC MMIO access virtualisation
(XEN) - APIC TPR shadow
(XEN) - Extended Page Tables (EPT)
(XEN) - Virtual-Processor Identifiers (VPID)
(XEN) - Virtual NMI
(XEN) - MSR direct-access bitmap
(XEN) EPT supports 2MB super page.
(XEN) HVM: ASIDs enabled.
(XEN) HVM: VMX enabled
(XEN) HVM: Hardware Assisted Paging detected.
(XEN) Brought up 8 CPUs
(XEN) HPET: 8 timers in total, 8 timers will be used for broadcast
(XEN) ACPI sleep modes: S3
(XEN) mcheck_poll: Machine check polling timer started.
(XEN) *** LOADING DOMAIN 0 ***
(XEN) elf_parse_binary: phdr: paddr=0x1000000 memsz=0x404000
(XEN) elf_parse_binary: phdr: paddr=0x1404000 memsz=0x850d0
(XEN) elf_parse_binary: phdr: paddr=0x148a000 memsz=0x888
(XEN) elf_parse_binary: phdr: paddr=0x148b000 memsz=0x14e98
(XEN) elf_parse_binary: phdr: paddr=0x14a0000 memsz=0x268000
(XEN) elf_parse_binary: memory: 0x1000000 -> 0x1708000
(XEN) elf_xen_parse_note: GUEST_OS = "linux"
(XEN) elf_xen_parse_note: GUEST_VERSION = "2.6"
(XEN) elf_xen_parse_note: XEN_VERSION = "xen-3.0"
(XEN) elf_xen_parse_note: VIRT_BASE = 0xffffffff80000000
(XEN) elf_xen_parse_note: ENTRY = 0xffffffff814a0200
(XEN) elf_xen_parse_note: HYPERCALL_PAGE = 0xffffffff81009000
(XEN) elf_xen_parse_note: FEATURES = "!writable_page_tables|pae_pgdir_above_4gb"
(XEN) elf_xen_parse_note: PAE_MODE = "yes"
(XEN) elf_xen_parse_note: LOADER = "generic"
(XEN) elf_xen_parse_note: unknown xen elf note (0xd)
(XEN) elf_xen_parse_note: SUSPEND_CANCEL = 0x1
(XEN) elf_xen_parse_note: HV_START_LOW = 0xffff800000000000
(XEN) elf_xen_parse_note: PADDR_OFFSET = 0x0
(XEN) elf_xen_addr_calc_check: addresses:
(XEN) virt_base = 0xffffffff80000000
(XEN) elf_paddr_offset = 0x0
(XEN) virt_offset = 0xffffffff80000000
(XEN) virt_kstart = 0xffffffff81000000
(XEN) virt_kend = 0xffffffff81708000
(XEN) virt_entry = 0xffffffff814a0200
(XEN) p2m_base = 0xffffffffffffffff
(XEN) Xen kernel: 64-bit, lsb, compat32
(XEN) Dom0 kernel: 64-bit, PAE, lsb, paddr 0x1000000 -> 0x1708000
(XEN) PHYSICAL MEMORY ARRANGEMENT:
(XEN) Dom0 alloc.: 0000000234000000->0000000238000000 (2012036 pages to be allocated)
(XEN) Init. ramdisk: 000000023ed28000->000000023ffffa00
(XEN) VIRTUAL MEMORY ARRANGEMENT:
(XEN) Loaded kernel: ffffffff81000000->ffffffff81708000
(XEN) Init. ramdisk: ffffffff81708000->ffffffff829dfa00
(XEN) Phys-Mach map: ffffffff829e0000->ffffffff839632e0
(XEN) Start info: ffffffff83964000->ffffffff839644b4
(XEN) Page tables: ffffffff83965000->ffffffff83986000
(XEN) Boot stack: ffffffff83986000->ffffffff83987000
(XEN) TOTAL: ffffffff80000000->ffffffff83c00000
(XEN) ENTRY ADDRESS: ffffffff814a0200
(XEN) Dom0 has maximum 8 VCPUs
(XEN) elf_load_binary: phdr 0 at 0xffffffff81000000 -> 0xffffffff81404000
(XEN) elf_load_binary: phdr 1 at 0xffffffff81404000 -> 0xffffffff814890d0
(XEN) elf_load_binary: phdr 2 at 0xffffffff8148a000 -> 0xffffffff8148a888
(XEN) elf_load_binary: phdr 3 at 0xffffffff8148b000 -> 0xffffffff8149fe98
(XEN) elf_load_binary: phdr 4 at 0xffffffff814a0000 -> 0xffffffff81530000
(XEN) Scrubbing Free RAM: .done.
(XEN) Xen trace buffers: disabled
(XEN) Std. Loglevel: All
(XEN) Guest Loglevel: All
(XEN) Xen is relinquishing VGA console.
(XEN) *** Serial input -> DOM0 (type 'CTRL-a' three times to switch input to Xen)
(XEN) Freed 228kB init memory.
mapping kernel into physical memory
Xen: setup ISA identity maps
about to get started...
(XEN) PCI add device 00:00.0
(XEN) PCI add device 00:03.0
(XEN) PCI add device 00:05.0
(XEN) PCI add device 00:08.0
(XEN) PCI add device 00:08.1
(XEN) PCI add device 00:08.2
(XEN) PCI add device 00:08.3
(XEN) PCI add device 00:10.0
(XEN) PCI add device 00:10.1
(XEN) PCI add device 00:1a.0
(XEN) PCI add device 00:1c.0
(XEN) PCI add device 00:1c.4
(XEN) PCI add device 00:1d.0
(XEN) PCI add device 00:1e.0
(XEN) PCI add device 00:1f.0
(XEN) PCI add device 00:1f.2
(XEN) PCI add device 00:1f.5
(XEN) PCI add device 03:00.0
(XEN) PCI add device 02:00.0
(XEN) PCI add device 02:00.1
(XEN) PCI add device 01:03.0
(XEN) *** Serial input -> Xen (type 'CTRL-a' three times to switch input to DOM0)
(XEN) ==== PCI devices ====
(XEN) ff:05.3 - dom 0 - MSIs < >
(XEN) ff:05.2 - dom 0 - MSIs < >
(XEN) ff:05.1 - dom 0 - MSIs < >
(XEN) ff:05.0 - dom 0 - MSIs < >
(XEN) ff:04.3 - dom 0 - MSIs < >
(XEN) ff:04.2 - dom 0 - MSIs < >
(XEN) ff:04.1 - dom 0 - MSIs < >
(XEN) ff:04.0 - dom 0 - MSIs < >
(XEN) ff:03.4 - dom 0 - MSIs < >
(XEN) ff:03.2 - dom 0 - MSIs < >
(XEN) ff:03.1 - dom 0 - MSIs < >
(XEN) ff:03.0 - dom 0 - MSIs < >
(XEN) ff:02.1 - dom 0 - MSIs < >
(XEN) ff:02.0 - dom 0 - MSIs < >
(XEN) ff:00.1 - dom 0 - MSIs < >
(XEN) ff:00.0 - dom 0 - MSIs < >
(XEN) 03:00.0 - dom 0 - MSIs < >
(XEN) 02:00.1 - dom 0 - MSIs < >
(XEN) 02:00.0 - dom 0 - MSIs < >
(XEN) 01:03.0 - dom 0 - MSIs < >
(XEN) 00:1f.5 - dom 0 - MSIs < >
(XEN) 00:1f.2 - dom 0 - MSIs < >
(XEN) 00:1f.0 - dom 0 - MSIs < >
(XEN) 00:1e.0 - dom 0 - MSIs < >
(XEN) 00:1d.0 - dom 0 - MSIs < >
(XEN) 00:1c.4 - dom 0 - MSIs < 36 >
(XEN) 00:1c.0 - dom 0 - MSIs < 35 >
(XEN) 00:1a.0 - dom 0 - MSIs < >
(XEN) 00:10.1 - dom 0 - MSIs < >
(XEN) 00:10.0 - dom 0 - MSIs < >
(XEN) 00:08.3 - dom 0 - MSIs < >
(XEN) 00:08.2 - dom 0 - MSIs < >
(XEN) 00:08.1 - dom 0 - MSIs < >
(XEN) 00:08.0 - dom 0 - MSIs < >
(XEN) 00:05.0 - dom 0 - MSIs < 34 >
(XEN) 00:03.0 - dom 0 - MSIs < 33 >
(XEN) 00:00.0 - dom 0 - MSIs < >
[disconnect]
Script done on Thu 24 Mar 2011 16:30:23 GMT
[-- Attachment #3: dmidecode.out --]
[-- Type: text/plain, Size: 17785 bytes --]
# dmidecode 2.9
SMBIOS 2.6 present.
66 structures occupying 3175 bytes.
Table at 0xBF79C000.
Handle 0xDA00, DMI type 218, 11 bytes
OEM-specific Type
Header and Data:
DA 0B 00 DA B2 00 17 00 0E 20 00
Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
Vendor: Dell Inc.
Version: 1.1.5
Release Date: 05/24/2010
Address: 0xF0000
Runtime Size: 64 kB
ROM Size: 4096 kB
Characteristics:
ISA is supported
PCI is supported
PNP is supported
BIOS is upgradeable
BIOS shadowing is allowed
Boot from CD is supported
Selectable boot is supported
EDD is supported
Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
5.25"/360 KB floppy services are supported (int 13h)
5.25"/1.2 MB floppy services are supported (int 13h)
3.5"/720 KB floppy services are supported (int 13h)
8042 keyboard services are supported (int 9h)
Serial services are supported (int 14h)
CGA/mono video services are supported (int 10h)
ACPI is supported
USB legacy is supported
BIOS boot specification is supported
Function key-initiated network boot is supported
Targeted content distribution is supported
BIOS Revision: 1.1
Handle 0x0100, DMI type 1, 27 bytes
System Information
Manufacturer: Dell Inc.
Product Name: PowerEdge R310
Version: Not Specified
Serial Number: 7V8CW4J
UUID: 44454C4C-5600-1038-8043-B7C04F57344A
Wake-up Type: Power Switch
SKU Number: Not Specified
Family: Not Specified
Handle 0x0200, DMI type 2, 9 bytes
Base Board Information
Manufacturer: Dell Inc.
Product Name: 05XKKK
Version: A00
Serial Number: ..CN1374008H00Q0.
Handle 0x0300, DMI type 3, 21 bytes
Chassis Information
Manufacturer: Dell Inc.
Type: Rack Mount Chassis
Lock: Present
Version: Not Specified
Serial Number: 7V8CW4J
Asset Tag: Not Specified
Boot-up State: Safe
Power Supply State: Safe
Thermal State: Safe
Security Status: Unknown
OEM Information: 0x00000000
Height: 1 U
Number Of Power Cords: Unspecified
Contained Elements: 0
Handle 0x0400, DMI type 4, 40 bytes
Processor Information
Socket Designation: CPU1
Type: Central Processor
Family: Xeon
Manufacturer: Intel
ID: E5 06 01 00 FF FB EB BF
Signature: Type 0, Family 6, Model 30, Stepping 5
Flags:
FPU (Floating-point unit on-chip)
VME (Virtual mode extension)
DE (Debugging extension)
PSE (Page size extension)
TSC (Time stamp counter)
MSR (Model specific registers)
PAE (Physical address extension)
MCE (Machine check exception)
CX8 (CMPXCHG8 instruction supported)
APIC (On-chip APIC hardware supported)
SEP (Fast system call)
MTRR (Memory type range registers)
PGE (Page global enable)
MCA (Machine check architecture)
CMOV (Conditional move instruction supported)
PAT (Page attribute table)
PSE-36 (36-bit page size extension)
CLFSH (CLFLUSH instruction supported)
DS (Debug store)
ACPI (ACPI supported)
MMX (MMX technology supported)
FXSR (Fast floating-point save and restore)
SSE (Streaming SIMD extensions)
SSE2 (Streaming SIMD extensions 2)
SS (Self-snoop)
HTT (Hyper-threading technology)
TM (Thermal monitor supported)
PBE (Pending break enabled)
Version: Intel(R) Xeon(R) CPU X3450 @ 2.67GHz
Voltage: 1.2 V
External Clock: 4800 MHz
Max Speed: 3600 MHz
Current Speed: 2666 MHz
Status: Populated, Enabled
Upgrade: <OUT OF SPEC>
L1 Cache Handle: 0x0700
L2 Cache Handle: 0x0701
L3 Cache Handle: 0x0702
Serial Number: Not Specified
Asset Tag: Not Specified
Part Number: Not Specified
Core Count: 4
Core Enabled: 4
Thread Count: 8
Characteristics:
64-bit capable
Handle 0x0700, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 1
Operational Mode: Write Back
Location: Internal
Installed Size: 128 KB
Maximum Size: 128 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Data
Associativity: 8-way Set-associative
Handle 0x0701, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 2
Operational Mode: Write Back
Location: Internal
Installed Size: 1024 KB
Maximum Size: 2048 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 8-way Set-associative
Handle 0x0702, DMI type 7, 19 bytes
Cache Information
Socket Designation: Not Specified
Configuration: Enabled, Not Socketed, Level 3
Operational Mode: Write Back
Location: Internal
Installed Size: 8192 KB
Maximum Size: 8192 KB
Supported SRAM Types:
Unknown
Installed SRAM Type: Unknown
Speed: Unknown
Error Correction Type: Single-bit ECC
System Type: Unified
Associativity: 16-way Set-associative
Handle 0x0800, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x0801, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-15 female
Port Type: Video Port
Handle 0x0802, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0803, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0804, DMI type 126, 9 bytes
Inactive
Handle 0x0805, DMI type 126, 9 bytes
Inactive
Handle 0x0806, DMI type 126, 9 bytes
Inactive
Handle 0x0807, DMI type 126, 9 bytes
Inactive
Handle 0x0808, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x0809, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: Access Bus (USB)
Port Type: USB
Handle 0x080A, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: INT_USB1
Internal Connector Type: Access Bus (USB)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: USB
Handle 0x080B, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: INT_USB2
Internal Connector Type: Access Bus (USB)
External Reference Designator: Not Specified
External Connector Type: None
Port Type: USB
Handle 0x080C, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: INT_SATA1
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x080D, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: INT_SATA2
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x080E, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: INT_SATA3
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x080F, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: INT_SATA4
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0810, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: INT_SATA5
Internal Connector Type: SAS/SATA Plug Receptacle
External Reference Designator: Not Specified
External Connector Type: None
Port Type: SATA
Handle 0x0811, DMI type 126, 9 bytes
Inactive
Handle 0x0812, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x0813, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: RJ-45
Port Type: Network Port
Handle 0x0814, DMI type 8, 9 bytes
Port Connector Information
Internal Reference Designator: Not Specified
Internal Connector Type: None
External Reference Designator: Not Specified
External Connector Type: DB-9 male
Port Type: Serial Port 16550A Compatible
Handle 0x0900, DMI type 9, 17 bytes
System Slot Information
Designation: PCIE1
Type: x8 <OUT OF SPEC>
Current Usage: Available
Length: Long
Characteristics:
3.3 V is provided
PME signal is supported
Handle 0x0901, DMI type 9, 17 bytes
System Slot Information
Designation: PCIE2
Type: x8 <OUT OF SPEC>
Current Usage: Available
Length: Long
Characteristics:
3.3 V is provided
PME signal is supported
Handle 0x0902, DMI type 126, 17 bytes
Inactive
Handle 0x0903, DMI type 126, 17 bytes
Inactive
Handle 0x0904, DMI type 126, 17 bytes
Inactive
Handle 0x0A00, DMI type 10, 12 bytes
On Board Device 1 Information
Type: Video
Status: Enabled
Description: Embedded Matrox G200 Video
On Board Device 2 Information
Type: Ethernet
Status: Enabled
Description: Embedded Broadcom 5716 NIC 1
On Board Device 3 Information
Type: Ethernet
Status: Enabled
Description: Embedded Broadcom 5716 NIC 2
On Board Device 4 Information
Type: SAS Controller
Status: Enabled
Description: Integrated SAS Controller
Handle 0x0B00, DMI type 11, 5 bytes
OEM Strings
String 1: Dell System
String 2: 5[0000]
Handle 0x7E00, DMI type 126, 170 bytes
Inactive
Handle 0x0C00, DMI type 12, 5 bytes
System Configuration Options
Option 1: NVRAM_CLR: Clear user settable NVRAM areas and set defaults
Option 2: PWRD_EN: Close to enable password
Handle 0x0D00, DMI type 13, 22 bytes
BIOS Language Information
Installable Languages: 1
en|US|iso8859-1
Currently Installed Language: en|US|iso8859-1
Handle 0x1000, DMI type 16, 15 bytes
Physical Memory Array
Location: System Board Or Motherboard
Use: System Memory
Error Correction Type: Multi-bit ECC
Maximum Capacity: 32 GB
Error Information Handle: Not Provided
Number Of Devices: 6
Handle 0x1100, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: 1
Locator: DIMM_A1
Bank Locator: Not Specified
Type: <OUT OF SPEC>
Type Detail: Synchronous
Speed: 1333 MHz (0.8 ns)
Manufacturer: 00AD000080AD
Serial Number: 0FA35777
Asset Tag: 01103000
Part Number: HMT125U7TFR8C-H9
Handle 0x1101, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: 1
Locator: DIMM_A2
Bank Locator: Not Specified
Type: <OUT OF SPEC>
Type Detail: Synchronous
Speed: 1333 MHz (0.8 ns)
Manufacturer: 00AD000080AD
Serial Number: 0F635782
Asset Tag: 01103000
Part Number: HMT125U7TFR8C-H9
Handle 0x1102, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: 2
Locator: DIMM_A3
Bank Locator: Not Specified
Type: <OUT OF SPEC>
Type Detail: Synchronous
Speed: 1333 MHz (0.8 ns)
Manufacturer: 00AD000080AD
Serial Number: 0F23577E
Asset Tag: 01103000
Part Number: HMT125U7TFR8C-H9
Handle 0x1103, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: 2048 MB
Form Factor: DIMM
Set: 2
Locator: DIMM_A4
Bank Locator: Not Specified
Type: <OUT OF SPEC>
Type Detail: Synchronous
Speed: 1333 MHz (0.8 ns)
Manufacturer: 00AD000080AD
Serial Number: 0F535115
Asset Tag: 01103000
Part Number: HMT125U7TFR8C-H9
Handle 0x1104, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 3
Locator: DIMM_A5
Bank Locator: Not Specified
Type: <OUT OF SPEC>
Type Detail: Synchronous
Speed: Unknown
Manufacturer:
Serial Number:
Asset Tag:
Part Number:
Handle 0x1105, DMI type 17, 28 bytes
Memory Device
Array Handle: 0x1000
Error Information Handle: Not Provided
Total Width: 72 bits
Data Width: 64 bits
Size: No Module Installed
Form Factor: DIMM
Set: 3
Locator: DIMM_A6
Bank Locator: Not Specified
Type: <OUT OF SPEC>
Type Detail: Synchronous
Speed: Unknown
Manufacturer:
Serial Number:
Asset Tag:
Part Number:
Handle 0x1300, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00000000000
Ending Address: 0x000BFFFFFFF
Range Size: 3 GB
Physical Array Handle: 0x1000
Partition Width: 0
Handle 0x1301, DMI type 19, 15 bytes
Memory Array Mapped Address
Starting Address: 0x00100000000
Ending Address: 0x0023FFFFFFF
Range Size: 5 GB
Physical Array Handle: 0x1000
Partition Width: 0
Handle 0x2000, DMI type 32, 11 bytes
System Boot Information
Status: No errors detected
Handle 0x2600, DMI type 38, 18 bytes
IPMI Device Information
Interface Type: KCS (Keyboard Control Style)
Specification Version: 2.0
I2C Slave Address: 0x10
NV Storage Device: Not Present
Base Address: 0x0000000000000CA8 (I/O)
Register Spacing: 32-bit Boundaries
Handle 0x2900, DMI type 41, 11 bytes
Unknown Type
Header and Data:
29 0B 00 29 01 85 01 00 00 02 00
Strings:
Embedded NIC 1
Handle 0x2901, DMI type 41, 11 bytes
Unknown Type
Header and Data:
29 0B 01 29 01 85 02 00 00 02 01
Strings:
Embedded NIC 2
Handle 0x2902, DMI type 41, 11 bytes
Unknown Type
Header and Data:
29 0B 02 29 01 8A 04 00 00 03 00
Strings:
Integrated SAS
Handle 0x2903, DMI type 126, 11 bytes
Inactive
Handle 0x2904, DMI type 41, 11 bytes
Unknown Type
Header and Data:
29 0B 04 29 01 83 04 00 00 01 18
Strings:
Embedded Video
Handle 0xD000, DMI type 208, 16 bytes
OEM-specific Type
Header and Data:
D0 10 00 D0 02 00 FE 00 A3 02 00 00 00 01 00 00
Handle 0xD200, DMI type 210, 12 bytes
OEM-specific Type
Header and Data:
D2 0C 00 D2 F8 03 04 03 06 80 04 05
Handle 0xD400, DMI type 212, 87 bytes
OEM-specific Type
Header and Data:
D4 57 00 D4 70 00 71 00 00 10 2D 2E 42 00 11 FE
01 43 00 11 FE 00 70 01 11 9F 20 6F 01 11 9F 00
00 00 11 9F 20 00 00 11 9F 00 31 40 11 FB 00 32
40 11 FB 04 9D 00 11 FD 02 9E 00 11 FD 00 9F 00
26 FE 01 A0 00 26 FE 00 28 40 26 DF 20 29 40 26
DF 00 FF FF 00 00 00
Handle 0xD401, DMI type 212, 242 bytes
OEM-specific Type
Header and Data:
D4 F2 01 D4 70 00 71 00 03 40 5A 6D 5C 00 78 BF
40 5D 00 78 BF 00 6C 01 57 FC 00 6B 01 57 FC 01
6A 01 57 FC 02 12 02 57 EF 00 11 02 57 EF 10 77
01 54 FC 00 78 01 54 FC 01 79 01 54 FC 02 7A 01
54 FC 03 33 40 54 CF 00 34 40 54 CF 10 35 40 54
CF 20 36 40 54 CF 30 1A 40 54 FB 04 1B 40 54 FB
00 1C 40 54 F7 08 1D 40 54 F7 00 43 40 58 DF 20
42 40 58 DF 00 24 40 58 BF 40 25 40 58 BF 00 6E
00 58 FC 01 2D 00 58 FC 02 DA 01 58 FC 03 22 40
58 EF 10 23 40 58 EF 00 BB 00 58 F3 04 BC 00 58
F3 08 DB 01 58 F3 0C 2D 02 55 FE 01 2E 02 55 FE
00 D8 00 55 7F 80 D9 00 55 7F 00 54 02 56 DF 00
57 02 56 DF 20 4D 02 56 BF 00 4E 02 56 BF 40 2D
01 56 7F 80 2E 01 56 7F 00 00 C0 5C 00 0A 03 C0
67 00 05 83 00 76 00 00 84 00 77 00 00 FF FF 00
00 00
Handle 0xD402, DMI type 212, 172 bytes
OEM-specific Type
Header and Data:
D4 AC 02 D4 72 00 73 00 00 40 5D 5E D3 00 00 00
02 D4 00 02 00 02 4A 01 46 BF 40 4B 01 46 BF 00
00 90 2C 00 00 01 90 2D 00 00 DE 00 63 FE 01 26
40 42 FE 01 27 40 42 FE 00 17 01 4A FE 00 18 01
4A FE 01 19 01 4A FD 00 1A 01 4A FD 02 1B 01 4A
FB 00 1C 01 4A FB 04 1D 01 4A F7 00 1E 01 4A F7
08 1F 01 44 FE 00 20 01 44 FE 01 00 00 44 FD 00
00 00 44 FD 02 35 01 4B FC 00 37 01 4B FC 01 39
01 4B FC 02 3B 01 4B F3 04 02 40 46 DF 00 01 40
46 DF 20 FC 01 45 BF 00 FD 01 45 BF 40 00 00 45
7F 80 00 00 45 7F 00 FF FF 00 00 00
Handle 0xD403, DMI type 212, 97 bytes
OEM-specific Type
Header and Data:
D4 61 03 D4 72 00 73 00 00 40 5D 5E D1 00 46 FE
00 D2 00 46 FE 01 40 01 47 EF 10 41 01 47 EF 00
EB 01 47 FD 00 EA 01 47 FD 02 33 02 47 F3 04 32
02 47 F3 08 31 02 47 F3 00 6E 02 47 F3 00 4B 02
47 DF 00 4C 02 47 DF 20 44 01 4E CF 00 45 01 4E
CF 10 4A 02 4E F3 04 0C 80 4E F3 08 FF FF 00 00
00
Handle 0xD800, DMI type 216, 9 bytes
OEM-specific Type
Header and Data:
D8 09 00 D8 01 02 01 00 00
Strings:
MATROX
VGA/VBE BIOS, Version V3.8WO
Handle 0xDE00, DMI type 222, 16 bytes
OEM-specific Type
Header and Data:
DE 10 00 DE 01 08 FF FF 00 00 00 00 00 00 00 01
Handle 0xE100, DMI type 225, 33 bytes
OEM-specific Type
Header and Data:
E1 21 00 E1 01 01 00 04 00 02 00 11 00 03 01 11
00 04 02 11 00 05 03 11 00 06 04 11 00 07 05 11
00
Strings:
CPU.Socket.1
DIMM.Socket.A1
DIMM.Socket.A2
DIMM.Socket.A3
DIMM.Socket.A4
DIMM.Socket.A5
DIMM.Socket.A6
Handle 0x7F00, DMI type 127, 4 bytes
End Of Table
[-- Attachment #4: lspci.out --]
[-- Type: text/plain, Size: 25671 bytes --]
00:00.0 Host bridge: Intel Corporation Clarksfield/Lynnfield DMI (rev 11)
Subsystem: Dell Device 02a3
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1 Enable-
Address: 00000000 Data: 0000
Masking: 00000000 Pending: 00000000
Capabilities: [90] Express (v1) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [150] Access Controls <?>
Capabilities: [160] Vendor Specific Information <?>
00:03.0 PCI bridge: Intel Corporation Clarksfield/Lynnfield PCI Express Root Port 1 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Dell Device 02a3
Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1 Enable+
Address: feeff00c Data: 4151
Masking: 00000002 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #1, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 1, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power+ Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [150] Access Controls <?>
Capabilities: [160] Vendor Specific Information <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:05.0 PCI bridge: Intel Corporation Clarksfield/Lynnfield PCI Express Root Port 3 (rev 11) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Subsystem: Dell Device 02a3
Capabilities: [60] Message Signalled Interrupts: Mask+ 64bit- Queue=0/1 Enable+
Address: feeff00c Data: 4159
Masking: 00000002 Pending: 00000000
Capabilities: [90] Express (v2) Root Port (Slot+), MSI 00
DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #3, Speed 5GT/s, Width x8, ASPM L0s L1, Latency L0 <512ns, L1 <4us
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled+ Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surpise-
Slot # 2, PowerLimit 25.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg-
Control: AttnInd Off, PwrInd Off, Power+ Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet- Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna+ CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [e0] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Advanced Error Reporting <?>
Capabilities: [150] Access Controls <?>
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:08.0 System peripheral: Intel Corporation Clarksfield/Lynnfield System Management Registers (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Vendor Specific Information <?>
00:08.1 System peripheral: Intel Corporation Clarksfield/Lynnfield Semaphore and Scratchpad Registers (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Vendor Specific Information <?>
00:08.2 System peripheral: Intel Corporation Clarksfield/Lynnfield System Control and Status Registers (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Capabilities: [40] Express (v2) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM L0s, Latency L0 unlimited, L1 unlimited
ClockPM- Suprise+ LLActRep+ BwNot+
LnkCtl: ASPM Disabled; Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Vendor Specific Information <?>
00:08.3 System peripheral: Intel Corporation Clarksfield/Lynnfield Miscellaneous Registers (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.0 System peripheral: Intel Corporation Device d150 (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:10.1 System peripheral: Intel Corporation Device d151 (rev 11)
Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
00:1a.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device 02a3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: Memory at df0fc000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1c.0 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 1 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
I/O behind bridge: 0000f000-0000ffff
Memory behind bridge: df100000-df2fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: feeff00c Data: 4161
Capabilities: [90] Subsystem: Dell Device 02a3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.4 PCI bridge: Intel Corporation Ibex Peak PCI Express Root Port 5 (rev 05) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
Memory behind bridge: da000000-ddffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA+ VGA- MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v2) Root Port (Slot-), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag- RBE+ FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend-
LnkCap: Port #5, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <256ns, L1 <4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive+ BWMgmt- ABWMgmt-
RootCtl: ErrCorrectable- ErrNon-Fatal+ ErrFatal+ PMEIntEna- CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 Enable+
Address: feeff00c Data: 4169
Capabilities: [90] Subsystem: Dell Device 02a3
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller: Intel Corporation Ibex Peak USB2 Enhanced Host Controller (rev 05) (prog-if 20 [EHCI])
Subsystem: Dell Device 02a3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 22
Region 0: Memory at df0fe000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Capabilities: [98] PCIe advanced features <?>
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a5) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
Memory behind bridge: de000000-deffffff
Prefetchable memory behind bridge: 00000000d9800000-00000000d9ffffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
BridgeCtl: Parity+ SERR+ NoISA- VGA+ MAbort- >Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Dell Device 02a3
00:1f.0 ISA bridge: Intel Corporation Ibex Peak LPC Interface Controller (rev 05)
Subsystem: Dell Device 02a3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information <?>
00:1f.2 IDE interface: Intel Corporation Ibex Peak 4 port SATA IDE Controller (rev 05) (prog-if 8f [Master SecP SecO PriP PriO])
Subsystem: Dell Device 02a3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: I/O ports at eca0 [size=8]
Region 1: I/O ports at ec90 [size=4]
Region 2: I/O ports at eca8 [size=8]
Region 3: I/O ports at ec94 [size=4]
Region 4: I/O ports at ecc0 [size=16]
Region 5: I/O ports at ecd0 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCIe advanced features <?>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, ata_piix, ide-pci-generic
00:1f.5 IDE interface: Intel Corporation Ibex Peak 2 port SATA IDE Controller (rev 05) (prog-if 85 [Master SecO PriO])
Subsystem: Dell Device 02a3
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr+ Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 0: I/O ports at ecb0 [size=8]
Region 1: I/O ports at ec98 [size=4]
Region 2: I/O ports at ecb8 [size=8]
Region 3: I/O ports at ec9c [size=4]
Region 4: I/O ports at ece0 [size=16]
Region 5: I/O ports at ecf0 [size=16]
Capabilities: [70] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [b0] PCIe advanced features <?>
Kernel driver in use: ata_piix
Kernel modules: ata_generic, ata_piix, ide-pci-generic
01:03.0 VGA compatible controller: Matrox Graphics, Inc. MGA G200eW WPCM450 [Hermon] - Winbond/Nuvoton (rev 0a) (prog-if 00 [VGA controller])
Subsystem: Dell Device 02a3
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 32 (4000ns min, 8000ns max), Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 6
Region 0: Memory at d9800000 (32-bit, prefetchable) [size=8M]
Region 1: Memory at de7fc000 (32-bit, non-prefetchable) [size=16K]
Region 2: Memory at de800000 (32-bit, non-prefetchable) [size=8M]
[virtual] Expansion ROM at de000000 [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
02:00.0 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
Subsystem: Dell Device 02a3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 16
Region 0: Memory at da000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data <?>
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [a0] MSI-X: Enable+ Mask- TabSize=9
Vector table: BAR=0 offset=0000c000
PBA: BAR=0 offset=0000e000
Capabilities: [ac] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <2us, L1 <2us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Device Serial Number 2a-88-52-fe-ff-2b-2b-84
Capabilities: [110] Advanced Error Reporting <?>
Capabilities: [150] Power Budgeting <?>
Capabilities: [160] Virtual Channel <?>
Kernel driver in use: bnx2
Kernel modules: bnx2
02:00.1 Ethernet controller: Broadcom Corporation NetXtreme II BCM5716 Gigabit Ethernet (rev 20)
Subsystem: Dell Device 02a3
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin B routed to IRQ 17
Region 0: Memory at dc000000 (64-bit, non-prefetchable) [size=32M]
Capabilities: [48] Power Management version 3
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=1 PME-
Capabilities: [50] Vital Product Data <?>
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/4 Enable-
Address: 0000000000000000 Data: 0000
Capabilities: [a0] MSI-X: Enable- Mask- TabSize=9
Vector table: BAR=0 offset=0000c000
PBA: BAR=0 offset=0000e000
Capabilities: [ac] Express (v2) Endpoint, MSI 00
DevCap: MaxPayload 512 bytes, PhantFunc 0, Latency L0s <4us, L1 <64us
ExtTag- AttnBtn- AttnInd- PwrInd- RBE+ FLReset-
DevCtl: Report errors: Correctable- Non-Fatal+ Fatal+ Unsupported+
RlxdOrd+ ExtTag- PhantFunc- AuxPwr+ NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr+ TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x4, ASPM L0s L1, Latency L0 <2us, L1 <2us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Device Serial Number 2b-88-52-fe-ff-2b-2b-84
Capabilities: [110] Advanced Error Reporting <?>
Capabilities: [150] Power Budgeting <?>
Capabilities: [160] Virtual Channel <?>
Kernel driver in use: bnx2
Kernel modules: bnx2
03:00.0 SCSI storage controller: LSI Logic / Symbios Logic SAS1068E PCI-Express Fusion-MPT SAS (rev 08)
Subsystem: Dell SAS 6/iR Integrated Blades RAID Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1275
Region 0: I/O ports at fc00 [size=256]
Region 1: Memory at df2ec000 (64-bit, non-prefetchable) [size=16K]
Region 3: Memory at df2f0000 (64-bit, non-prefetchable) [size=64K]
Expansion ROM at df100000 [disabled] [size=1M]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 4096 bytes, PhantFunc 0, Latency L0s <64ns, L1 <1us
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal+ Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr+ FatalErr- UnsuppReq+ AuxPwr- TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x8, ASPM L0s L1, Latency L0 <64ns, L1 <1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x4, TrErr- Train- SlotClk- DLActive- BWMgmt- ABWMgmt-
Capabilities: [98] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable+
Address: 00000000feeff00c Data: 4181
Capabilities: [b0] MSI-X: Enable- Mask- TabSize=1
Vector table: BAR=1 offset=00002000
PBA: BAR=1 offset=00003000
Capabilities: [100] Advanced Error Reporting <?>
Kernel driver in use: mptsas
Kernel modules: mptsas
[-- Attachment #5: Type: text/plain, Size: 138 bytes --]
_______________________________________________
Xen-devel mailing list
Xen-devel@lists.xensource.com
http://lists.xensource.com/xen-devel
next reply other threads:[~2011-03-24 17:39 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-03-24 17:39 Goncalo Gomes [this message]
2011-03-25 14:49 ` Xen 4.2 unstable + Jeremy's stable/2.6.32.x Konrad Rzeszutek Wilk
2011-03-25 15:34 ` Goncalo Gomes
2011-03-25 16:42 ` Konrad Rzeszutek Wilk
2011-03-27 1:57 ` Goncalo Gomes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1300988390.2215.9.camel@eire \
--to=goncalo.gomes@eu.citrix.com \
--cc=xen-devel@lists.xensource.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.