Nvidia GT450M

Nvidia GT450M

[Marc Rios]

[-- Attachment #1.1: Type: text/plain, Size: 587 bytes --]

Hi,

I supose this has been reported yet, but I have not find it.

I have recently bought a new laptop (ASUS N53S) with nvidia card 450M. When
I load the nouveau module I get this error in dmesg:

[  117.724465] [drm] nouveau 0000:01:00.0: PGRAPH: unsupported chipset,
please report!
[  117.724593] [drm] nouveau 0000:01:00.0: PGRAPH: unknown config: 2/0/0/0,
1
[  117.727225] [drm] nouveau 0000:01:00.0: failed to load fuc409d

I think you may find it interesting. If I try to switch to nvidia card I get
a black screen. I supose, can be caused by this error...

Regards,

--
Marc Rios

[-- Attachment #1.2: Type: text/html, Size: 669 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

Re: Nvidia GT450M

[Ben Skeggs]

On Mon, 2011-04-18 at 21:17 +0200, Marc Rios wrote:
> Hi,
> 
> I supose this has been reported yet, but I have not find it. 
> 
> I have recently bought a new laptop (ASUS N53S) with nvidia card 450M.
> When I load the nouveau module I get this error in dmesg:
> 
> [  117.724465] [drm] nouveau 0000:01:00.0: PGRAPH: unsupported
> chipset, please report!
> [  117.724593] [drm] nouveau 0000:01:00.0: PGRAPH: unknown config:
> 2/0/0/0, 1
> [  117.727225] [drm] nouveau 0000:01:00.0: failed to load fuc409d
> 
> I think you may find it interesting. If I try to switch to nvidia card
> I get a black screen. I supose, can be caused by this error...
This error wouldn't get you a black screen.  However, I'd say you've
probably got an Optimus laptop, which means you're out of luck.  Only
the intel GPU is physically wired up to the display..

Ben.

> 
> Regards,
> 
> --
> Marc Rios
> 
> 
> _______________________________________________
> Nouveau mailing list
> Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
> http://lists.freedesktop.org/mailman/listinfo/nouveau

Re: Nvidia GT450M

[Marc Rios]

[-- Attachment #1.1: Type: text/plain, Size: 1538 bytes --]

Hi Ben,

I know I have optimus, and we are trying a module to be able to switch
between screens, you can check it here: git://
github.com/awilliam/asus-switcheroo.git

I will try to get better debug and see why I get a black screen...

This error is not significant then???

Thanks
--
Marc Rios




On Tue, Apr 19, 2011 at 12:33 AM, Ben Skeggs <skeggsb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:

> On Mon, 2011-04-18 at 21:17 +0200, Marc Rios wrote:
> > Hi,
> >
> > I supose this has been reported yet, but I have not find it.
> >
> > I have recently bought a new laptop (ASUS N53S) with nvidia card 450M.
> > When I load the nouveau module I get this error in dmesg:
> >
> > [  117.724465] [drm] nouveau 0000:01:00.0: PGRAPH: unsupported
> > chipset, please report!
> > [  117.724593] [drm] nouveau 0000:01:00.0: PGRAPH: unknown config:
> > 2/0/0/0, 1
> > [  117.727225] [drm] nouveau 0000:01:00.0: failed to load fuc409d
> >
> > I think you may find it interesting. If I try to switch to nvidia card
> > I get a black screen. I supose, can be caused by this error...
> This error wouldn't get you a black screen.  However, I'd say you've
> probably got an Optimus laptop, which means you're out of luck.  Only
> the intel GPU is physically wired up to the display..
>
> Ben.
>
> >
> > Regards,
> >
> > --
> > Marc Rios
> >
> >
> > _______________________________________________
> > Nouveau mailing list
> > Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
> > http://lists.freedesktop.org/mailman/listinfo/nouveau
>
>
>

[-- Attachment #1.2: Type: text/html, Size: 2316 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

Re: Nvidia GT450M

[Ben Skeggs]

On Tue, 2011-04-19 at 10:19 +0200, Marc Rios wrote:
> Hi Ben,
> 
> I know I have optimus, and we are trying a module to be able to switch
> between screens, you can check it here:
> git://github.com/awilliam/asus-switcheroo.git
> 
> I will try to get better debug and see why I get a black screen... 
> 
> This error is not significant then???
> 
Not to you having a black screen, no.  Can you post your *full* dmesg
output after you've tried to load nouveau?

Ben.
> Thanks
> --
> Marc Rios
> 
> 
> 
> 
> On Tue, Apr 19, 2011 at 12:33 AM, Ben Skeggs <skeggsb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> wrote:
>         
>         On Mon, 2011-04-18 at 21:17 +0200, Marc Rios wrote:
>         > Hi,
>         >
>         > I supose this has been reported yet, but I have not find it.
>         >
>         > I have recently bought a new laptop (ASUS N53S) with nvidia
>         card 450M.
>         > When I load the nouveau module I get this error in dmesg:
>         >
>         > [  117.724465] [drm] nouveau 0000:01:00.0: PGRAPH:
>         unsupported
>         > chipset, please report!
>         > [  117.724593] [drm] nouveau 0000:01:00.0: PGRAPH: unknown
>         config:
>         > 2/0/0/0, 1
>         > [  117.727225] [drm] nouveau 0000:01:00.0: failed to load
>         fuc409d
>         >
>         > I think you may find it interesting. If I try to switch to
>         nvidia card
>         > I get a black screen. I supose, can be caused by this
>         error...
>         
>         This error wouldn't get you a black screen.  However, I'd say
>         you've
>         probably got an Optimus laptop, which means you're out of
>         luck.  Only
>         the intel GPU is physically wired up to the display..
>         
>         Ben.
>         
>         >
>         > Regards,
>         >
>         > --
>         > Marc Rios
>         >
>         >
>         > _______________________________________________
>         > Nouveau mailing list
>         > Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
>         > http://lists.freedesktop.org/mailman/listinfo/nouveau
>         
>         
> 

Re: Nvidia GT450M

[Marc Rios]

[-- Attachment #1.1: Type: text/plain, Size: 2388 bytes --]

When I get some more time I send it to you ;)

Thanks
--
Marc Rios




On Tue, Apr 19, 2011 at 12:58 PM, Ben Skeggs <skeggsb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:

> On Tue, 2011-04-19 at 10:19 +0200, Marc Rios wrote:
> > Hi Ben,
> >
> > I know I have optimus, and we are trying a module to be able to switch
> > between screens, you can check it here:
> > git://github.com/awilliam/asus-switcheroo.git
> >
> > I will try to get better debug and see why I get a black screen...
> >
> > This error is not significant then???
> >
> Not to you having a black screen, no.  Can you post your *full* dmesg
> output after you've tried to load nouveau?
>
> Ben.
> > Thanks
> > --
> > Marc Rios
> >
> >
> >
> >
> > On Tue, Apr 19, 2011 at 12:33 AM, Ben Skeggs <skeggsb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > wrote:
> >
> >         On Mon, 2011-04-18 at 21:17 +0200, Marc Rios wrote:
> >         > Hi,
> >         >
> >         > I supose this has been reported yet, but I have not find it.
> >         >
> >         > I have recently bought a new laptop (ASUS N53S) with nvidia
> >         card 450M.
> >         > When I load the nouveau module I get this error in dmesg:
> >         >
> >         > [  117.724465] [drm] nouveau 0000:01:00.0: PGRAPH:
> >         unsupported
> >         > chipset, please report!
> >         > [  117.724593] [drm] nouveau 0000:01:00.0: PGRAPH: unknown
> >         config:
> >         > 2/0/0/0, 1
> >         > [  117.727225] [drm] nouveau 0000:01:00.0: failed to load
> >         fuc409d
> >         >
> >         > I think you may find it interesting. If I try to switch to
> >         nvidia card
> >         > I get a black screen. I supose, can be caused by this
> >         error...
> >
> >         This error wouldn't get you a black screen.  However, I'd say
> >         you've
> >         probably got an Optimus laptop, which means you're out of
> >         luck.  Only
> >         the intel GPU is physically wired up to the display..
> >
> >         Ben.
> >
> >         >
> >         > Regards,
> >         >
> >         > --
> >         > Marc Rios
> >         >
> >         >
> >         > _______________________________________________
> >         > Nouveau mailing list
> >         > Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
> >         > http://lists.freedesktop.org/mailman/listinfo/nouveau
> >
> >
> >
>
>
>

[-- Attachment #1.2: Type: text/html, Size: 3739 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

Re: Nvidia GT450M

[Marc Rios]

[-- Attachment #1.1: Type: text/plain, Size: 6259 bytes --]

Hi,

Here you have:

[   11.235656] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card
(0x0c1a00a1)
[   11.241784] vga_switcheroo: enabled
[   11.241797] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image
from PRAMIN
[   11.251512] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[   11.251514] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image
from PROM
[   11.251523] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[   11.251524] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image
from PCIROM
[   11.261342] nouveau 0000:01:00.0: Invalid ROM contents
[   11.261426] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[   11.261428] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image
from ACPI
[   11.352718] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   11.352722] [drm] nouveau 0000:01:00.0: BIT BIOS found
[   11.352725] [drm] nouveau 0000:01:00.0: Bios version 70.08.45.00
[   11.352727] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table
invalid
[   11.352760] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[   11.352762] [drm] nouveau 0000:01:00.0: Found Display Configuration Block
version 4.0
[   11.352765] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300
00000000
[   11.352768] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 0000000e
00000000
[   11.352770] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5
16 4
[   11.352773] [drm] nouveau 0000:01:00.0:   0: 0x00000000: type 0x00 idx 0
tag 0xff
[   11.352787] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running
VBIOS init tables.
[   11.352790] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at
offset 0xD56E
[   11.376810] [drm] nouveau 0000:01:00.0: 0xD518: i2c wr fail: -6
[   11.421321] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at
offset 0xDBBD
[   11.477293] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at
offset 0xEDC3
[   11.477307] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at
offset 0xEDC7
[   11.477371] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at
offset 0xEEAF
[   11.477373] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at
offset 0xEF14
[   11.519979] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[   11.519983] [drm] nouveau 0000:01:00.0: 0: memory 135MHz core 270MHz
shader 540MHz voltage 830mV
[   11.519987] [drm] nouveau 0000:01:00.0: 1: memory 405MHz core 270MHz
shader 810MHz voltage 830mV
[   11.519990] [drm] nouveau 0000:01:00.0: 3: memory 405MHz core 1070MHz
shader 1344MHz voltage 980mV
[   11.520062] [TTM] Zone  kernel: Available graphics memory: 1984826 kiB.
[   11.520064] [TTM] Initializing pool allocator.
[   11.520075] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[   11.539640] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[   11.539650] [drm] nouveau 0000:01:00.0: PGRAPH: unsupported chipset,
please report!
[   11.539833] [drm] nouveau 0000:01:00.0: PGRAPH: unknown config: 2/0/0/0,
1
[   11.760327] [drm] nouveau 0000:01:00.0: failed to load fuc409d
[   11.768770] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   11.768773] [drm] No driver support for vblank timestamp query.
[   11.768783] [drm] nouveau 0000:01:00.0: ACPI backlight interface
available, not registering our own
[   11.819321] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb:
0x30000000, bo ffff8801477a5c00
[   11.819386] fb1: nouveaufb frame buffer device
[   11.819392] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on
minor 1
[   12.869011] EXT3-fs: barriers not enabled


The asus switchzeroo is the module to be able to change the card.

Regards
--
Marc Rios




On Tue, Apr 19, 2011 at 12:52 PM, Marc Rios <marcrios84-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:

> When I get some more time I send it to you ;)
>
> Thanks
> --
> Marc Rios
>
>
>
>
>
> On Tue, Apr 19, 2011 at 12:58 PM, Ben Skeggs <skeggsb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>
>> On Tue, 2011-04-19 at 10:19 +0200, Marc Rios wrote:
>> > Hi Ben,
>> >
>> > I know I have optimus, and we are trying a module to be able to switch
>> > between screens, you can check it here:
>> > git://github.com/awilliam/asus-switcheroo.git
>> >
>> > I will try to get better debug and see why I get a black screen...
>> >
>> > This error is not significant then???
>> >
>> Not to you having a black screen, no.  Can you post your *full* dmesg
>> output after you've tried to load nouveau?
>>
>> Ben.
>> > Thanks
>> > --
>> > Marc Rios
>> >
>> >
>> >
>> >
>> > On Tue, Apr 19, 2011 at 12:33 AM, Ben Skeggs <skeggsb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
>> > wrote:
>> >
>> >         On Mon, 2011-04-18 at 21:17 +0200, Marc Rios wrote:
>> >         > Hi,
>> >         >
>> >         > I supose this has been reported yet, but I have not find it.
>> >         >
>> >         > I have recently bought a new laptop (ASUS N53S) with nvidia
>> >         card 450M.
>> >         > When I load the nouveau module I get this error in dmesg:
>> >         >
>> >         > [  117.724465] [drm] nouveau 0000:01:00.0: PGRAPH:
>> >         unsupported
>> >         > chipset, please report!
>> >         > [  117.724593] [drm] nouveau 0000:01:00.0: PGRAPH: unknown
>> >         config:
>> >         > 2/0/0/0, 1
>> >         > [  117.727225] [drm] nouveau 0000:01:00.0: failed to load
>> >         fuc409d
>> >         >
>> >         > I think you may find it interesting. If I try to switch to
>> >         nvidia card
>> >         > I get a black screen. I supose, can be caused by this
>> >         error...
>> >
>> >         This error wouldn't get you a black screen.  However, I'd say
>> >         you've
>> >         probably got an Optimus laptop, which means you're out of
>> >         luck.  Only
>> >         the intel GPU is physically wired up to the display..
>> >
>> >         Ben.
>> >
>> >         >
>> >         > Regards,
>> >         >
>> >         > --
>> >         > Marc Rios
>> >         >
>> >         >
>> >         > _______________________________________________
>> >         > Nouveau mailing list
>> >         > Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
>> >         > http://lists.freedesktop.org/mailman/listinfo/nouveau
>> >
>> >
>> >
>>
>>
>>
>

[-- Attachment #1.2: Type: text/html, Size: 8229 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

Re: Nvidia GT450M

[Pekka Paalanen]

On Fri, 22 Apr 2011 18:32:51 +0200
Marc Rios <marcrios84-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:

> Hi,
> 
> Here you have:

<snip>

From your paste:
[   11.819386] fb1: nouveaufb frame buffer device

This means nouveaufb is fb1, while fbcon by default is in fb0.
That is, fbcon is not using nouveaufb, but another driver that
was loaded before nouveau. Unfortunately we cannot see what
happened, because you did not include the full dmesg.
Full really means full, from boot, up to and including the
problem, not filtered in any way.

I hope other people will see this reply and really post a full
dmesg when asked to. It is also instructed in
http://nouveau.freedesktop.org/wiki/Bugs

Thanks.

> > On Tue, Apr 19, 2011 at 12:58 PM, Ben Skeggs
> > <skeggsb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> >
> >> Not to you having a black screen, no.  Can you post your
> >> *full* dmesg output after you've tried to load nouveau?
> >>
> >> Ben.

-- 
Pekka Paalanen
http://www.iki.fi/pq/

Re: Nvidia GT450M

[Marc Rios]

[-- Attachment #1.1: Type: text/plain, Size: 1376 bytes --]

Hi, i think this is because on boot, the framebuffer is for the intel card,
not nvidia... but the problem on config it's there. Tomorrow I send you full
if you want... this system is an intel and nvidia.
El 22/04/2011 20:31, "Pekka Paalanen" <pq-X3B1VOXEql0@public.gmane.org> escribió:
> On Fri, 22 Apr 2011 18:32:51 +0200
> Marc Rios <marcrios84-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>
>> Hi,
>>
>> Here you have:
>
> <snip>
>
> From your paste:
> [ 11.819386] fb1: nouveaufb frame buffer device
>
> This means nouveaufb is fb1, while fbcon by default is in fb0.
> That is, fbcon is not using nouveaufb, but another driver that
> was loaded before nouveau. Unfortunately we cannot see what
> happened, because you did not include the full dmesg.
> Full really means full, from boot, up to and including the
> problem, not filtered in any way.
>
> I hope other people will see this reply and really post a full
> dmesg when asked to. It is also instructed in
> http://nouveau.freedesktop.org/wiki/Bugs
>
> Thanks.
>
>> > On Tue, Apr 19, 2011 at 12:58 PM, Ben Skeggs
>> > <skeggsb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
>> >
>> >> Not to you having a black screen, no. Can you post your
>> >> *full* dmesg output after you've tried to load nouveau?
>> >>
>> >> Ben.
>
> --
> Pekka Paalanen
> http://www.iki.fi/pq/
>

[-- Attachment #1.2: Type: text/html, Size: 2037 bytes --]

[-- Attachment #2: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau

Re: Nvidia GT450M

[Marc Rios]

[-- Attachment #1.1: Type: text/plain, Size: 1622 bytes --]

Here you have ;)

Regards
--
Marc Rios




On Fri, Apr 22, 2011 at 8:35 PM, Marc Rios <marcrios84-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:

> Hi, i think this is because on boot, the framebuffer is for the intel card,
> not nvidia... but the problem on config it's there. Tomorrow I send you full
> if you want... this system is an intel and nvidia.
> El 22/04/2011 20:31, "Pekka Paalanen" <pq-X3B1VOXEql0@public.gmane.org> escribió:
>
> > On Fri, 22 Apr 2011 18:32:51 +0200
> > Marc Rios <marcrios84-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> >
> >> Hi,
> >>
> >> Here you have:
> >
> > <snip>
> >
> > From your paste:
> > [ 11.819386] fb1: nouveaufb frame buffer device
> >
> > This means nouveaufb is fb1, while fbcon by default is in fb0.
> > That is, fbcon is not using nouveaufb, but another driver that
> > was loaded before nouveau. Unfortunately we cannot see what
> > happened, because you did not include the full dmesg.
> > Full really means full, from boot, up to and including the
> > problem, not filtered in any way.
> >
> > I hope other people will see this reply and really post a full
> > dmesg when asked to. It is also instructed in
> > http://nouveau.freedesktop.org/wiki/Bugs
> >
> > Thanks.
> >
> >> > On Tue, Apr 19, 2011 at 12:58 PM, Ben Skeggs
> >> > <skeggsb-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org> wrote:
> >> >
> >> >> Not to you having a black screen, no. Can you post your
> >> >> *full* dmesg output after you've tried to load nouveau?
> >> >>
> >> >> Ben.
> >
> > --
> > Pekka Paalanen
> > http://www.iki.fi/pq/
> >
>

[-- Attachment #1.2: Type: text/html, Size: 2604 bytes --]

[-- Attachment #2: full_dmesg.log --]
[-- Type: application/octet-stream, Size: 64812 bytes --]

[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.38-2-amd64 (Debian 2.6.38-3) (ben@decadent.org.uk) (gcc version 4.4.5 (Debian 4.4.5-15) ) #1 SMP Thu Apr 7 04:28:07 UTC 2011
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-2.6.38-2-amd64 root=UUID=bf2e250a-f1d3-4fa0-a9e2-dbe245ce5a70 ro quiet
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
[    0.000000]  BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[    0.000000]  BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[    0.000000]  BIOS-e820: 0000000020200000 - 0000000040000000 (usable)
[    0.000000]  BIOS-e820: 0000000040000000 - 0000000040200000 (reserved)
[    0.000000]  BIOS-e820: 0000000040200000 - 00000000aac10000 (usable)
[    0.000000]  BIOS-e820: 00000000aac10000 - 00000000aad8e000 (reserved)
[    0.000000]  BIOS-e820: 00000000aad8e000 - 00000000aad97000 (usable)
[    0.000000]  BIOS-e820: 00000000aad97000 - 00000000aad98000 (reserved)
[    0.000000]  BIOS-e820: 00000000aad98000 - 00000000aad99000 (usable)
[    0.000000]  BIOS-e820: 00000000aad99000 - 00000000aadb8000 (reserved)
[    0.000000]  BIOS-e820: 00000000aadb8000 - 00000000aadc6000 (usable)
[    0.000000]  BIOS-e820: 00000000aadc6000 - 00000000aade8000 (reserved)
[    0.000000]  BIOS-e820: 00000000aade8000 - 00000000aaf1f000 (usable)
[    0.000000]  BIOS-e820: 00000000aaf1f000 - 00000000aaf86000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000aaf86000 - 00000000aaf8a000 (usable)
[    0.000000]  BIOS-e820: 00000000aaf8a000 - 00000000aafe8000 (ACPI NVS)
[    0.000000]  BIOS-e820: 00000000aafe8000 - 00000000aaffd000 (usable)
[    0.000000]  BIOS-e820: 00000000aaffd000 - 00000000ab000000 (ACPI data)
[    0.000000]  BIOS-e820: 00000000ab000000 - 00000000afa00000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff980000 - 00000000ffc00000 (reserved)
[    0.000000]  BIOS-e820: 00000000ffd80000 - 0000000100000000 (reserved)
[    0.000000]  BIOS-e820: 0000000100000000 - 000000014fe00000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: ASUSTeK Computer Inc. N53SV/N53SV, BIOS N53SV.209 02/10/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0x14fe00 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-CFFFF write-protect
[    0.000000]   D0000-E7FFF uncachable
[    0.000000]   E8000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 000000000 mask F80000000 write-back
[    0.000000]   1 base 080000000 mask FE0000000 write-back
[    0.000000]   2 base 0A0000000 mask FF8000000 write-back
[    0.000000]   3 base 0A8000000 mask FFC000000 write-back
[    0.000000]   4 base 0AB000000 mask FFF000000 uncachable
[    0.000000]   5 base 100000000 mask FC0000000 write-back
[    0.000000]   6 base 140000000 mask FF0000000 write-back
[    0.000000]   7 base 14FE00000 mask FFFE00000 uncachable
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] e820 update range: 00000000ab000000 - 0000000100000000 (usable) ==> (reserved)
[    0.000000] last_pfn = 0xaaffd max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fcc70] fcc70
[    0.000000] initial memory mapped : 0 - 20000000
[    0.000000] init_memory_mapping: 0000000000000000-00000000aaffd000
[    0.000000]  0000000000 - 00aae00000 page 2M
[    0.000000]  00aae00000 - 00aaffd000 page 4k
[    0.000000] kernel direct mapping tables up to aaffd000 @ 1fffb000-20000000
[    0.000000] init_memory_mapping: 0000000100000000-000000014fe00000
[    0.000000]  0100000000 - 014fe00000 page 2M
[    0.000000] kernel direct mapping tables up to 14fe00000 @ aaff6000-aaffd000
[    0.000000] RAMDISK: 36d7a000 - 376b5000
[    0.000000] ACPI: RSDP 00000000000f0430 00024 (v02 _ASUS_)
[    0.000000] ACPI: XSDT 00000000aaffee18 00074 (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
[    0.000000] ACPI: FACP 00000000aaf9ad98 000F4 (v04 _ASUS_ Notebook 06222004 MSFT 00010013)
[    0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110112/tbfadt-369)
[    0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xAAFE4E40/0x00000000AAFE4D40, using 32 (20110112/tbfadt-486)
[    0.000000] ACPI: DSDT 00000000aaf65018 13528 (v01 _ASUS_ Notebook 00000000 INTL 20091112)
[    0.000000] ACPI: FACS 00000000aafe4e40 00040
[    0.000000] ACPI: APIC 00000000aaffdf18 000CC (v02 _ASUS_ Notebook 06222004 MSFT 00010013)
[    0.000000] ACPI: DBGP 00000000aaffff18 00034 (v01 _ASUS_ Notebook 06222004 MSFT 00010013)
[    0.000000] ACPI: ECDT 00000000aafe4b18 000C1 (v01 _ASUS_ Notebook 06222004 AMI. 00000003)
[    0.000000] ACPI: SLIC 00000000aaf9be18 00176 (v01 _ASUS_ Notebook 06222004 ASUS 00000001)
[    0.000000] ACPI: HPET 00000000aafe5d18 00038 (v01 _ASUS_ Notebook 06222004 AMI. 00000003)
[    0.000000] ACPI: MCFG 00000000aafe5c98 0003C (v01 _ASUS_ Notebook 06222004 MSFT 00000097)
[    0.000000] ACPI: SSDT 00000000aaf85818 00787 (v01  PmRef  Cpu0Ist 00003000 INTL 20091112)
[    0.000000] ACPI: SSDT 00000000aaf84018 00996 (v01  PmRef    CpuPm 00003000 INTL 20091112)
[    0.000000] ACPI: ASF! 00000000aafe4a18 000A0 (v32 INTEL       HCG 00000001 TFSM 000F4240)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-000000014fe00000
[    0.000000] Initmem setup node 0 0000000000000000-000000014fe00000
[    0.000000]   NODE_DATA [000000014fdfb000 - 000000014fdfffff]
[    0.000000]  [ffffea0000000000-ffffea00049fffff] PMD -> [ffff88014bc00000-ffff88014f5fffff] on node 0
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x0014fe00
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[11] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x0000009e
[    0.000000]     0: 0x00000100 -> 0x00020000
[    0.000000]     0: 0x00020200 -> 0x00040000
[    0.000000]     0: 0x00040200 -> 0x000aac10
[    0.000000]     0: 0x000aad8e -> 0x000aad97
[    0.000000]     0: 0x000aad98 -> 0x000aad99
[    0.000000]     0: 0x000aadb8 -> 0x000aadc6
[    0.000000]     0: 0x000aade8 -> 0x000aaf1f
[    0.000000]     0: 0x000aaf86 -> 0x000aaf8a
[    0.000000]     0: 0x000aafe8 -> 0x000aaffd
[    0.000000]     0: 0x00100000 -> 0x0014fe00
[    0.000000] On node 0 totalpages: 1025798
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 6 pages reserved
[    0.000000]   DMA zone: 3920 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 680368 pages, LIFO batch:31
[    0.000000]   Normal zone: 4473 pages used for memmap
[    0.000000]   Normal zone: 322695 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x408
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x08] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x09] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0a] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x0b] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x0c] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x0d] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x0e] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x0f] disabled)
[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] SMP: Allowing 16 CPUs, 12 hotplug CPUs
[    0.000000] nr_irqs_gsi: 40
[    0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
[    0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[    0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[    0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[    0.000000] PM: Registered nosave memory: 0000000040000000 - 0000000040200000
[    0.000000] PM: Registered nosave memory: 00000000aac10000 - 00000000aad8e000
[    0.000000] PM: Registered nosave memory: 00000000aad97000 - 00000000aad98000
[    0.000000] PM: Registered nosave memory: 00000000aad99000 - 00000000aadb8000
[    0.000000] PM: Registered nosave memory: 00000000aadc6000 - 00000000aade8000
[    0.000000] PM: Registered nosave memory: 00000000aaf1f000 - 00000000aaf86000
[    0.000000] PM: Registered nosave memory: 00000000aaf8a000 - 00000000aafe8000
[    0.000000] PM: Registered nosave memory: 00000000aaffd000 - 00000000ab000000
[    0.000000] PM: Registered nosave memory: 00000000ab000000 - 00000000afa00000
[    0.000000] PM: Registered nosave memory: 00000000afa00000 - 00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000e4000000
[    0.000000] PM: Registered nosave memory: 00000000e4000000 - 00000000fec00000
[    0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[    0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[    0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
[    0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
[    0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
[    0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[    0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[    0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[    0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[    0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff980000
[    0.000000] PM: Registered nosave memory: 00000000ff980000 - 00000000ffc00000
[    0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffd80000
[    0.000000] PM: Registered nosave memory: 00000000ffd80000 - 0000000100000000
[    0.000000] Allocating PCI resources starting at afa00000 (gap: afa00000:30600000)
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:16 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff88001fc00000 s82752 r8192 d23744 u131072
[    0.000000] pcpu-alloc: s82752 r8192 d23744 u131072 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 
[    0.000000] Built 1 zonelists in Node order, mobility grouping on.  Total pages: 1006983
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-2.6.38-2-amd64 root=UUID=bf2e250a-f1d3-4fa0-a9e2-dbe245ce5a70 ro quiet
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[    0.000000] Checking aperture...
[    0.000000] No AGP bridge found
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 3957928k/5502976k available (3259k kernel code, 1399784k absent, 145264k reserved, 3426k data, 676k init)
[    0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=16, Nodes=1
[    0.000000] Hierarchical RCU implementation.
[    0.000000] 	RCU dyntick-idle grace-period acceleration is enabled.
[    0.000000] 	RCU-based detection of stalled CPUs is disabled.
[    0.000000] NR_IRQS:33024 nr_irqs:808 16
[    0.000000] Extended CMOS year: 2000
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] Fast TSC calibration using PIT
[    0.004000] Detected 2294.673 MHz processor.
[    0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4589.34 BogoMIPS (lpj=9178692)
[    0.000007] pid_max: default: 32768 minimum: 301
[    0.000033] Security Framework initialized
[    0.000036] SELinux:  Disabled at boot.
[    0.000382] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.001441] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.001882] Mount-cache hash table entries: 256
[    0.002003] Initializing cgroup subsys ns
[    0.002006] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
[    0.002008] Initializing cgroup subsys cpuacct
[    0.002014] Initializing cgroup subsys devices
[    0.002016] Initializing cgroup subsys freezer
[    0.002018] Initializing cgroup subsys net_cls
[    0.002019] Initializing cgroup subsys blkio
[    0.002048] CPU: Physical Processor ID: 0
[    0.002050] CPU: Processor Core ID: 0
[    0.002055] mce: CPU supports 7 MCE banks
[    0.002066] CPU0: Thermal monitoring enabled (TM1)
[    0.002073] using mwait in idle threads.
[    0.003140] ACPI: Core revision 20110112
[    0.167011] Not enabling x2apic, Intr-remapping init failed.
[    0.167013] Setting APIC routing to physical flat
[    0.167355] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.207016] CPU0: Intel(R) Core(TM) i5-2410M CPU @ 2.30GHz stepping 07
[    0.312006] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[    0.312011] ... version:                3
[    0.312013] ... bit width:              48
[    0.312014] ... generic registers:      4
[    0.312015] ... value mask:             0000ffffffffffff
[    0.312016] ... max period:             000000007fffffff
[    0.312018] ... fixed-purpose events:   3
[    0.312019] ... event mask:             000000070000000f
[    0.312245] NMI watchdog enabled, takes one hw-pmu counter.
[    0.312313] Booting Node   0, Processors  #1
[    0.420016] NMI watchdog enabled, takes one hw-pmu counter.
[    0.420086]  #2
[    0.527960] NMI watchdog enabled, takes one hw-pmu counter.
[    0.528035]  #3
[    0.635929] NMI watchdog enabled, takes one hw-pmu counter.
[    0.635958] Brought up 4 CPUs
[    0.635960] Total of 4 processors activated (18357.45 BogoMIPS).
[    0.637670] devtmpfs: initialized
[    0.640568] print_constraints: dummy: 
[    0.640608] NET: Registered protocol family 16
[    0.640681] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.640684] ACPI: bus type pci registered
[    0.640752] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
[    0.640755] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[    0.651498] PCI: Using configuration type 1 for base access
[    0.651871] bio: create slab <bio-0> at 0
[    0.653949] ACPI: EC: EC description table is found, configuring boot EC
[    0.655969] ACPI: Executed 1 blocks of module-level executable AML code
[    0.671866] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.775911] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.775977] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.776524] ACPI: SSDT 00000000aadca718 00694 (v01  PmRef  Cpu0Cst 00003001 INTL 20091112)
[    0.777026] ACPI: Dynamic OEM Table Load:
[    0.777028] ACPI: SSDT           (null) 00694 (v01  PmRef  Cpu0Cst 00003001 INTL 20091112)
[    0.788069] ACPI: SSDT 00000000aadcba98 00303 (v01  PmRef    ApIst 00003000 INTL 20091112)
[    0.788604] ACPI: Dynamic OEM Table Load:
[    0.788606] ACPI: SSDT           (null) 00303 (v01  PmRef    ApIst 00003000 INTL 20091112)
[    0.799914] ACPI: SSDT 00000000aadc9d98 00119 (v01  PmRef    ApCst 00003000 INTL 20091112)
[    0.800403] ACPI: Dynamic OEM Table Load:
[    0.800405] ACPI: SSDT           (null) 00119 (v01  PmRef    ApCst 00003000 INTL 20091112)
[    0.812392] ACPI: Interpreter enabled
[    0.812395] ACPI: (supports S0 S3 S4 S5)
[    0.812418] ACPI: Using IOAPIC for interrupt routing
[    0.936898] ACPI: EC: GPE = 0x1b, I/O: command/status = 0x66, data = 0x62
[    0.947906] ACPI: No dock devices found.
[    0.947908] HEST: Table not found.
[    0.947910] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.948182] \_SB_.PCI0:_OSC invalid UUID
[    0.948183] _OSC request data:1 8 1f 
[    0.948186] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.948633] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    0.948635] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    0.948637] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[    0.948639] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[    0.948641] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[    0.948643] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[    0.948645] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[    0.948647] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[    0.948648] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[    0.948651] pci_root PNP0A08:00: host bridge window [mem 0xafa00000-0xfeafffff]
[    0.948653] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
[    0.948664] pci 0000:00:00.0: [8086:0104] type 0 class 0x000600
[    0.948696] pci 0000:00:01.0: [8086:0101] type 1 class 0x000604
[    0.948719] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    0.948722] pci 0000:00:01.0: PME# disabled
[    0.948740] pci 0000:00:02.0: [8086:0116] type 0 class 0x000300
[    0.948750] pci 0000:00:02.0: reg 10: [mem 0xdc400000-0xdc7fffff 64bit]
[    0.948756] pci 0000:00:02.0: reg 18: [mem 0xb0000000-0xbfffffff 64bit pref]
[    0.948760] pci 0000:00:02.0: reg 20: [io  0xe000-0xe03f]
[    0.948809] pci 0000:00:16.0: [8086:1c3a] type 0 class 0x000780
[    0.948833] pci 0000:00:16.0: reg 10: [mem 0xdf00b000-0xdf00b00f 64bit]
[    0.948895] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.948899] pci 0000:00:16.0: PME# disabled
[    0.948931] pci 0000:00:1a.0: [8086:1c2d] type 0 class 0x000c03
[    0.948952] pci 0000:00:1a.0: reg 10: [mem 0xdf008000-0xdf0083ff]
[    0.949025] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.949029] pci 0000:00:1a.0: PME# disabled
[    0.949053] pci 0000:00:1b.0: [8086:1c20] type 0 class 0x000403
[    0.949068] pci 0000:00:1b.0: reg 10: [mem 0xdf000000-0xdf003fff 64bit]
[    0.949122] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.949127] pci 0000:00:1b.0: PME# disabled
[    0.949149] pci 0000:00:1c.0: [8086:1c10] type 1 class 0x000604
[    0.949211] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.949215] pci 0000:00:1c.0: PME# disabled
[    0.949238] pci 0000:00:1c.1: [8086:1c12] type 1 class 0x000604
[    0.949301] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[    0.949305] pci 0000:00:1c.1: PME# disabled
[    0.949329] pci 0000:00:1c.3: [8086:1c16] type 1 class 0x000604
[    0.949391] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.949395] pci 0000:00:1c.3: PME# disabled
[    0.949420] pci 0000:00:1c.5: [8086:1c1a] type 1 class 0x000604
[    0.949481] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[    0.949486] pci 0000:00:1c.5: PME# disabled
[    0.949515] pci 0000:00:1d.0: [8086:1c26] type 0 class 0x000c03
[    0.949536] pci 0000:00:1d.0: reg 10: [mem 0xdf007000-0xdf0073ff]
[    0.949608] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.949613] pci 0000:00:1d.0: PME# disabled
[    0.949637] pci 0000:00:1f.0: [8086:1c49] type 0 class 0x000601
[    0.949752] pci 0000:00:1f.2: [8086:1c03] type 0 class 0x000106
[    0.949770] pci 0000:00:1f.2: reg 10: [io  0xe0b0-0xe0b7]
[    0.949778] pci 0000:00:1f.2: reg 14: [io  0xe0a0-0xe0a3]
[    0.949787] pci 0000:00:1f.2: reg 18: [io  0xe090-0xe097]
[    0.949795] pci 0000:00:1f.2: reg 1c: [io  0xe080-0xe083]
[    0.949803] pci 0000:00:1f.2: reg 20: [io  0xe060-0xe07f]
[    0.949811] pci 0000:00:1f.2: reg 24: [mem 0xdf006000-0xdf0067ff]
[    0.949844] pci 0000:00:1f.2: PME# supported from D3hot
[    0.949848] pci 0000:00:1f.2: PME# disabled
[    0.949866] pci 0000:00:1f.3: [8086:1c22] type 0 class 0x000c05
[    0.949883] pci 0000:00:1f.3: reg 10: [mem 0xdf005000-0xdf0050ff 64bit]
[    0.949904] pci 0000:00:1f.3: reg 20: [io  0xe040-0xe05f]
[    0.949962] pci 0000:01:00.0: [10de:0df4] type 0 class 0x000300
[    0.949974] pci 0000:01:00.0: reg 10: [mem 0xdb000000-0xdbffffff]
[    0.949986] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[    0.949999] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[    0.950008] pci 0000:01:00.0: reg 24: [io  0xd000-0xd07f]
[    0.950017] pci 0000:01:00.0: reg 30: [mem 0xdc000000-0xdc07ffff pref]
[    0.950062] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    0.950065] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    0.950067] pci 0000:00:01.0:   bridge window [mem 0xdb000000-0xdc0fffff]
[    0.950071] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    0.950115] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    0.950120] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    0.950124] pci 0000:00:1c.0:   bridge window [mem 0xde600000-0xdeffffff]
[    0.950130] pci 0000:00:1c.0:   bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
[    0.950196] pci 0000:03:00.0: [168c:002b] type 0 class 0x000280
[    0.950223] pci 0000:03:00.0: reg 10: [mem 0xddc00000-0xddc0ffff 64bit]
[    0.950327] pci 0000:03:00.0: supports D1
[    0.950329] pci 0000:03:00.0: PME# supported from D0 D1 D3hot D3cold
[    0.950334] pci 0000:03:00.0: PME# disabled
[    0.950371] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    0.950375] pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
[    0.950379] pci 0000:00:1c.1:   bridge window [mem 0xddc00000-0xde5fffff]
[    0.950386] pci 0000:00:1c.1:   bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
[    0.950453] pci 0000:04:00.0: [1b73:1000] type 0 class 0x000c03
[    0.950474] pci 0000:04:00.0: reg 10: [mem 0xdd200000-0xdd20ffff]
[    0.950601] pci 0000:04:00.0: PME# supported from D0 D3hot
[    0.950607] pci 0000:04:00.0: PME# disabled
[    0.950636] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    0.950640] pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
[    0.950644] pci 0000:00:1c.3:   bridge window [mem 0xdd200000-0xddbfffff]
[    0.950651] pci 0000:00:1c.3:   bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
[    0.950768] pci 0000:05:00.0: [10ec:8168] type 0 class 0x000200
[    0.950835] pci 0000:05:00.0: reg 10: [io  0x9000-0x90ff]
[    0.950955] pci 0000:05:00.0: reg 18: [mem 0xd2104000-0xd2104fff 64bit pref]
[    0.951029] pci 0000:05:00.0: reg 20: [mem 0xd2100000-0xd2103fff 64bit pref]
[    0.951232] pci 0000:05:00.0: supports D1 D2
[    0.951233] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.951248] pci 0000:05:00.0: PME# disabled
[    0.951397] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[    0.951401] pci 0000:00:1c.5:   bridge window [io  0x9000-0x9fff]
[    0.951406] pci 0000:00:1c.5:   bridge window [mem 0xdc800000-0xdd1fffff]
[    0.951412] pci 0000:00:1c.5:   bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
[    0.951435] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.951590] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[    0.951670] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.951707] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.951749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[    0.951787] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[    0.951863] \_SB_.PCI0:_OSC invalid UUID
[    0.951864] _OSC request data:1 1f 1f 
[    0.951868]  pci0000:00: Requesting ACPI _OSC control (0x1d)
[    0.951901] \_SB_.PCI0:_OSC invalid UUID
[    0.951902] _OSC request data:1 0 1d 
[    1.679871] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[    1.679917] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 12)
[    1.679960] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 12)
[    1.680003] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 *5 6 7 10 12)
[    1.680044] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    1.680087] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[    1.680131] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[    1.680173] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 10 12)
[    1.680251] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    1.680258] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[    1.680261] vgaarb: loaded
[    1.680286] PCI: Using ACPI for IRQ routing
[    1.680288] PCI: pci_cache_line_size set to 64 bytes
[    1.680370] reserve RAM buffer: 000000000009e800 - 000000000009ffff 
[    1.680372] reserve RAM buffer: 00000000aac10000 - 00000000abffffff 
[    1.680377] reserve RAM buffer: 00000000aad97000 - 00000000abffffff 
[    1.680380] reserve RAM buffer: 00000000aad99000 - 00000000abffffff 
[    1.680384] reserve RAM buffer: 00000000aadc6000 - 00000000abffffff 
[    1.680387] reserve RAM buffer: 00000000aaf1f000 - 00000000abffffff 
[    1.680390] reserve RAM buffer: 00000000aaf8a000 - 00000000abffffff 
[    1.680392] reserve RAM buffer: 00000000aaffd000 - 00000000abffffff 
[    1.680394] reserve RAM buffer: 000000014fe00000 - 000000014fffffff 
[    1.680481] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    1.680486] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    1.682499] Switching to clocksource hpet
[    1.683240] Switched to NOHz mode on CPU #0
[    1.683299] Switched to NOHz mode on CPU #1
[    1.683305] Switched to NOHz mode on CPU #2
[    1.683333] Switched to NOHz mode on CPU #3
[    1.683519] pnp: PnP ACPI init
[    1.683533] ACPI: bus type pnp registered
[    1.683772] pnp 00:00: [bus 00-3e]
[    1.683774] pnp 00:00: [io  0x0000-0x0cf7 window]
[    1.683775] pnp 00:00: [io  0x0cf8-0x0cff]
[    1.683777] pnp 00:00: [io  0x0d00-0xffff window]
[    1.683779] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    1.683781] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[    1.683782] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[    1.683784] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[    1.683786] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[    1.683787] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[    1.683789] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[    1.683791] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[    1.683792] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[    1.683797] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[    1.683799] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[    1.683800] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[    1.683802] pnp 00:00: [mem 0x000ec000-0x000effff window]
[    1.683804] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[    1.683805] pnp 00:00: [mem 0xafa00000-0xfeafffff window]
[    1.683807] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    1.683856] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[    1.738509] pnp 00:01: [io  0x0000-0x001f]
[    1.738511] pnp 00:01: [io  0x0081-0x0091]
[    1.738512] pnp 00:01: [io  0x0093-0x009f]
[    1.738513] pnp 00:01: [io  0x00c0-0x00df]
[    1.738515] pnp 00:01: [dma 4]
[    1.738544] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    1.738551] pnp 00:02: [mem 0xff000000-0xffffffff]
[    1.738573] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[    1.738652] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[    1.738675] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[    1.738683] pnp 00:04: [io  0x00f0]
[    1.738691] pnp 00:04: [irq 13]
[    1.738713] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[    1.738722] pnp 00:05: [io  0x002e-0x002f]
[    1.738724] pnp 00:05: [io  0x004e-0x004f]
[    1.738725] pnp 00:05: [io  0x0061]
[    1.738726] pnp 00:05: [io  0x0063]
[    1.738728] pnp 00:05: [io  0x0065]
[    1.738729] pnp 00:05: [io  0x0067]
[    1.738730] pnp 00:05: [io  0x0070]
[    1.738731] pnp 00:05: [io  0x0080]
[    1.738733] pnp 00:05: [io  0x0092]
[    1.738734] pnp 00:05: [io  0x00b2-0x00b3]
[    1.738735] pnp 00:05: [io  0x0680-0x069f]
[    1.738737] pnp 00:05: [io  0x1000-0x100f]
[    1.738738] pnp 00:05: [io  0xffff]
[    1.738739] pnp 00:05: [io  0xffff]
[    1.738741] pnp 00:05: [io  0x0400-0x0453]
[    1.738742] pnp 00:05: [io  0x0458-0x047f]
[    1.738743] pnp 00:05: [io  0x0500-0x057f]
[    1.738745] pnp 00:05: [io  0x164e-0x164f]
[    1.738790] system 00:05: [io  0x0680-0x069f] has been reserved
[    1.738792] system 00:05: [io  0x1000-0x100f] has been reserved
[    1.738794] system 00:05: [io  0xffff] has been reserved
[    1.738796] system 00:05: [io  0xffff] has been reserved
[    1.738798] system 00:05: [io  0x0400-0x0453] has been reserved
[    1.738800] system 00:05: [io  0x0458-0x047f] has been reserved
[    1.738802] system 00:05: [io  0x0500-0x057f] has been reserved
[    1.738804] system 00:05: [io  0x164e-0x164f] has been reserved
[    1.738806] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.738813] pnp 00:06: [io  0x0070-0x0077]
[    1.738818] pnp 00:06: [irq 8]
[    1.738842] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[    1.738859] pnp 00:07: [io  0x0454-0x0457]
[    1.738893] system 00:07: [io  0x0454-0x0457] has been reserved
[    1.738895] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    1.738906] pnp 00:08: [io  0x0240-0x0259]
[    1.738941] system 00:08: [io  0x0240-0x0259] has been reserved
[    1.738943] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.738977] pnp 00:09: [irq 12]
[    1.739003] pnp 00:09: Plug and Play ACPI device, IDs ETD0001 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[    1.739019] pnp 00:0a: [io  0x0060]
[    1.739021] pnp 00:0a: [io  0x0064]
[    1.739025] pnp 00:0a: [irq 1]
[    1.739050] pnp 00:0a: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    1.739244] pnp 00:0b: [mem 0xfed1c000-0xfed1ffff]
[    1.739245] pnp 00:0b: [mem 0xfed10000-0xfed17fff]
[    1.739247] pnp 00:0b: [mem 0xfed18000-0xfed18fff]
[    1.739248] pnp 00:0b: [mem 0xfed19000-0xfed19fff]
[    1.739250] pnp 00:0b: [mem 0xe0000000-0xe3ffffff]
[    1.739251] pnp 00:0b: [mem 0xfed20000-0xfed3ffff]
[    1.739253] pnp 00:0b: [mem 0xfed90000-0xfed93fff]
[    1.739254] pnp 00:0b: [mem 0xfed45000-0xfed8ffff]
[    1.739256] pnp 00:0b: [mem 0xff000000-0xffffffff]
[    1.739257] pnp 00:0b: [mem 0xfee00000-0xfeefffff]
[    1.739259] pnp 00:0b: [mem 0x00000000-0xffffffffffffffff disabled]
[    1.739314] system 00:0b: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    1.739316] system 00:0b: [mem 0xfed10000-0xfed17fff] could not be reserved
[    1.739318] system 00:0b: [mem 0xfed18000-0xfed18fff] has been reserved
[    1.739321] system 00:0b: [mem 0xfed19000-0xfed19fff] has been reserved
[    1.739323] system 00:0b: [mem 0xe0000000-0xe3ffffff] has been reserved
[    1.739325] system 00:0b: [mem 0xfed20000-0xfed3ffff] has been reserved
[    1.739327] system 00:0b: [mem 0xfed90000-0xfed93fff] has been reserved
[    1.739329] system 00:0b: [mem 0xfed45000-0xfed8ffff] has been reserved
[    1.739332] system 00:0b: [mem 0xff000000-0xffffffff] could not be reserved
[    1.739334] system 00:0b: [mem 0xfee00000-0xfeefffff] could not be reserved
[    1.739336] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.739384] pnp 00:0c: [mem 0xafa00000-0xafa00fff]
[    1.739432] system 00:0c: [mem 0xafa00000-0xafa00fff] has been reserved
[    1.739435] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[    1.739542] pnp 00:0d: [mem 0x20000000-0x201fffff]
[    1.739544] pnp 00:0d: [mem 0x40000000-0x401fffff]
[    1.739594] system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
[    1.739596] system 00:0d: [mem 0x40000000-0x401fffff] has been reserved
[    1.739599] system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
[    1.739619] pnp: PnP ACPI: found 14 devices
[    1.739621] ACPI: ACPI bus type pnp unregistered
[    1.745649] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    1.745652] pci 0000:00:01.0:   bridge window [io  0xd000-0xdfff]
[    1.745655] pci 0000:00:01.0:   bridge window [mem 0xdb000000-0xdc0fffff]
[    1.745657] pci 0000:00:01.0:   bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.745661] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    1.745664] pci 0000:00:1c.0:   bridge window [io  0xc000-0xcfff]
[    1.745670] pci 0000:00:1c.0:   bridge window [mem 0xde600000-0xdeffffff]
[    1.745674] pci 0000:00:1c.0:   bridge window [mem 0xd4200000-0xd4bfffff 64bit pref]
[    1.745681] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[    1.745684] pci 0000:00:1c.1:   bridge window [io  0xb000-0xbfff]
[    1.745690] pci 0000:00:1c.1:   bridge window [mem 0xddc00000-0xde5fffff]
[    1.745694] pci 0000:00:1c.1:   bridge window [mem 0xd3700000-0xd40fffff 64bit pref]
[    1.745701] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[    1.745704] pci 0000:00:1c.3:   bridge window [io  0xa000-0xafff]
[    1.745709] pci 0000:00:1c.3:   bridge window [mem 0xdd200000-0xddbfffff]
[    1.745714] pci 0000:00:1c.3:   bridge window [mem 0xd2c00000-0xd35fffff 64bit pref]
[    1.745721] pci 0000:00:1c.5: PCI bridge to [bus 05-05]
[    1.745724] pci 0000:00:1c.5:   bridge window [io  0x9000-0x9fff]
[    1.745729] pci 0000:00:1c.5:   bridge window [mem 0xdc800000-0xdd1fffff]
[    1.745734] pci 0000:00:1c.5:   bridge window [mem 0xd2100000-0xd2afffff 64bit pref]
[    1.745750] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.745753] pci 0000:00:01.0: setting latency timer to 64
[    1.745760] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    1.745764] pci 0000:00:1c.0: setting latency timer to 64
[    1.745774] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.745779] pci 0000:00:1c.1: setting latency timer to 64
[    1.745789] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    1.745793] pci 0000:00:1c.3: setting latency timer to 64
[    1.745800] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[    1.745804] pci 0000:00:1c.5: setting latency timer to 64
[    1.745808] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    1.745810] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    1.745812] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    1.745813] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    1.745815] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    1.745817] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    1.745819] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[    1.745821] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
[    1.745822] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
[    1.745824] pci_bus 0000:00: resource 13 [mem 0xafa00000-0xfeafffff]
[    1.745826] pci_bus 0000:00: resource 14 [mem 0xfed40000-0xfed44fff]
[    1.745828] pci_bus 0000:01: resource 0 [io  0xd000-0xdfff]
[    1.745829] pci_bus 0000:01: resource 1 [mem 0xdb000000-0xdc0fffff]
[    1.745831] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[    1.745833] pci_bus 0000:02: resource 0 [io  0xc000-0xcfff]
[    1.745835] pci_bus 0000:02: resource 1 [mem 0xde600000-0xdeffffff]
[    1.745837] pci_bus 0000:02: resource 2 [mem 0xd4200000-0xd4bfffff 64bit pref]
[    1.745839] pci_bus 0000:03: resource 0 [io  0xb000-0xbfff]
[    1.745840] pci_bus 0000:03: resource 1 [mem 0xddc00000-0xde5fffff]
[    1.745842] pci_bus 0000:03: resource 2 [mem 0xd3700000-0xd40fffff 64bit pref]
[    1.745844] pci_bus 0000:04: resource 0 [io  0xa000-0xafff]
[    1.745846] pci_bus 0000:04: resource 1 [mem 0xdd200000-0xddbfffff]
[    1.745847] pci_bus 0000:04: resource 2 [mem 0xd2c00000-0xd35fffff 64bit pref]
[    1.745849] pci_bus 0000:05: resource 0 [io  0x9000-0x9fff]
[    1.745851] pci_bus 0000:05: resource 1 [mem 0xdc800000-0xdd1fffff]
[    1.745852] pci_bus 0000:05: resource 2 [mem 0xd2100000-0xd2afffff 64bit pref]
[    1.745877] NET: Registered protocol family 2
[    1.746004] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[    1.746863] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[    1.748643] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    1.748862] TCP: Hash tables configured (established 524288 bind 65536)
[    1.748863] TCP reno registered
[    1.748873] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    1.748893] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    1.749014] NET: Registered protocol family 1
[    1.749028] pci 0000:00:02.0: Boot video device
[    2.002426] PCI: CLS 64 bytes, default 64
[    2.002460] Unpacking initramfs...
[    2.213343] Freeing initrd memory: 9452k freed
[    2.214637] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    2.214642] Placing 64MB software IO TLB between ffff88001bc00000 - ffff88001fc00000
[    2.214644] software IO TLB at phys 0x1bc00000 - 0x1fc00000
[    2.215059] audit: initializing netlink socket (disabled)
[    2.215067] type=2000 audit(1303556466.908:1): initialized
[    2.223624] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    2.225291] VFS: Disk quotas dquot_6.5.2
[    2.225339] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    2.225418] msgmni has been set to 7748
[    2.225570] alg: No test for stdrng (krng)
[    2.225608] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    2.225611] io scheduler noop registered
[    2.225612] io scheduler deadline registered
[    2.225641] io scheduler cfq registered (default)
[    2.225696] pcieport 0000:00:01.0: setting latency timer to 64
[    2.225721] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[    2.226013] ERST: Table is not found!
[    2.226059] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    2.326627] Linux agpgart interface v0.103
[    2.326692] agpgart-intel 0000:00:00.0: Intel Sandybridge Chipset
[    2.326801] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    2.327894] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[    2.327990] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xb0000000
[    2.328086] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[    2.329575] i8042: Detected active multiplexing controller, rev 1.1
[    2.330373] serio: i8042 KBD port at 0x60,0x64 irq 1
[    2.330380] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    2.330389] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    2.330392] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    2.330395] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    2.330554] mousedev: PS/2 mouse device common for all mice
[    2.330593] rtc_cmos 00:06: RTC can wake from S4
[    2.330656] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[    2.330683] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[    2.330692] cpuidle: using governor ladder
[    2.330694] cpuidle: using governor menu
[    2.330849] TCP cubic registered
[    2.330948] NET: Registered protocol family 10
[    2.331348] Mobile IPv6
[    2.331350] NET: Registered protocol family 17
[    2.331355] Registering the dns_resolver key type
[    2.331431] PM: Hibernation image not present or could not be loaded.
[    2.331444] registered taskstats version 1
[    2.331904] rtc_cmos 00:06: setting system clock to 2011-04-23 11:01:08 UTC (1303556468)
[    2.331961] Initalizing network drop monitor service
[    2.333031] Freeing unused kernel memory: 676k freed
[    2.333113] Write protecting the kernel read-only data: 6144k
[    2.335566] Freeing unused kernel memory: 820k freed
[    2.337917] Freeing unused kernel memory: 776k freed
[    2.349796] <30>udev[59]: starting version 167
[    2.364365] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    2.395649] thermal LNXTHERM:00: registered as thermal_zone0
[    2.395652] ACPI: Thermal Zone [THRM] (38 C)
[    2.405849] usbcore: registered new interface driver usbfs
[    2.405875] usbcore: registered new interface driver hub
[    2.405916] usbcore: registered new device driver usb
[    2.406907] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    2.406929] r8169 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    2.406975] r8169 0000:05:00.0: setting latency timer to 64
[    2.406982] r8169 0000:05:00.0: (unregistered net_device): unknown MAC, using family default
[    2.407049] r8169 0000:05:00.0: irq 41 for MSI/MSI-X
[    2.407539] r8169 0000:05:00.0: eth0: RTL8168b/8111b at 0xffffc90005098000, bc:ae:c5:62:58:9b, XID 0c200000 IRQ 41
[    2.410564] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.410585] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    2.410604] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[    2.410608] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[    2.410634] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    2.418821] SCSI subsystem initialized
[    2.426092] ehci_hcd 0000:00:1a.0: debug port 2
[    2.429975] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[    2.429992] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xdf008000
[    2.431776] libata version 3.00 loaded.
[    2.442071] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    2.442117] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    2.442124] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.442129] usb usb1: Product: EHCI Host Controller
[    2.442134] usb usb1: Manufacturer: Linux 2.6.38-2-amd64 ehci_hcd
[    2.442146] usb usb1: SerialNumber: 0000:00:1a.0
[    2.442259] hub 1-0:1.0: USB hub found
[    2.442265] hub 1-0:1.0: 2 ports detected
[    2.442350] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[    2.442370] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[    2.442373] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[    2.442380] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    2.458096] ehci_hcd 0000:00:1d.0: debug port 2
[    2.461971] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[    2.461986] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xdf007000
[    2.474047] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    2.474081] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    2.474087] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.474091] usb usb2: Product: EHCI Host Controller
[    2.474096] usb usb2: Manufacturer: Linux 2.6.38-2-amd64 ehci_hcd
[    2.474100] usb usb2: SerialNumber: 0000:00:1d.0
[    2.474215] hub 2-0:1.0: USB hub found
[    2.474220] hub 2-0:1.0: 2 ports detected
[    2.474279] ahci 0000:00:1f.2: version 3.0
[    2.474291] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    2.474338] ahci 0000:00:1f.2: irq 42 for MSI/MSI-X
[    2.474391] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[    2.474395] ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ems apst 
[    2.474401] ahci 0000:00:1f.2: setting latency timer to 64
[    2.482631] scsi0 : ahci
[    2.482717] scsi1 : ahci
[    2.482776] scsi2 : ahci
[    2.482833] scsi3 : ahci
[    2.482889] scsi4 : ahci
[    2.482947] scsi5 : ahci
[    2.483237] ata1: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006100 irq 42
[    2.483240] ata2: SATA max UDMA/133 abar m2048@0xdf006000 port 0xdf006180 irq 42
[    2.483242] ata3: DUMMY
[    2.483243] ata4: DUMMY
[    2.483244] ata5: DUMMY
[    2.483245] ata6: DUMMY
[    2.753912] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    2.801884] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    2.801916] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    2.804684] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.804692] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    2.804695] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.806269] ata2.00: ATAPI: MATSHITADVD-RAM UJ8A0ASW, 1.01, max UDMA/100
[    2.809664] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    2.809672] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.811239] ata2.00: configured for UDMA/100
[    2.815132] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    2.815139] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.886190] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[    2.886197] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    2.886455] hub 1-1:1.0: USB hub found
[    2.886554] hub 1-1:1.0: 6 ports detected
[    2.921229] ata1.00: ATA-8: ST9640320AS, 0002SDM1, max UDMA/133
[    2.921236] ata1.00: 1250263728 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    2.937281] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[    2.946906] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[    2.946914] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[    2.977037] ata1.00: configured for UDMA/133
[    2.977195] scsi 0:0:0:0: Direct-Access     ATA      ST9640320AS      0002 PQ: 0 ANSI: 5
[    2.980135] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ8A0ASW 1.01 PQ: 0 ANSI: 5
[    2.988346] sd 0:0:0:0: [sda] 1250263728 512-byte logical blocks: (640 GB/596 GiB)
[    2.988402] sd 0:0:0:0: [sda] Write Protect is off
[    2.988405] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.988428] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.991825] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[    2.991833] cdrom: Uniform CD-ROM driver Revision: 3.20
[    2.991992] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    2.997830] usb 2-1: new high speed USB device using ehci_hcd and address 2
[    3.039091]  sda: sda1 sda2 sda3 sda4 < sda5 sda6 >
[    3.039489] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.042983] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    3.043025] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    3.130063] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[    3.130072] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.130346] hub 2-1:1.0: USB hub found
[    3.130427] hub 2-1:1.0: 6 ports detected
[    3.201786] usb 1-1.1: new full speed USB device using ehci_hcd and address 3
[    3.213671] Refined TSC clocksource calibration: 2294.786 MHz.
[    3.213678] Switching to clocksource tsc
[    3.294490] usb 1-1.1: New USB device found, idVendor=13d3, idProduct=3304
[    3.294498] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    3.365703] usb 1-1.2: new high speed USB device using ehci_hcd and address 4
[    3.496121] usb 1-1.2: New USB device found, idVendor=13d3, idProduct=5122
[    3.496129] usb 1-1.2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[    3.496134] usb 1-1.2: Product: USB2.0 UVC 2M WebCam
[    3.496139] usb 1-1.2: Manufacturer: USB2.0 UVC 2M WebCam
[    3.496143] usb 1-1.2: SerialNumber: USB2.0 UVC 2M WebCam
[    3.573590] usb 2-1.3: new low speed USB device using ehci_hcd and address 3
[    3.671405] usb 2-1.3: New USB device found, idVendor=046d, idProduct=c50c
[    3.671413] usb 2-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    3.671418] usb 2-1.3: Product: USB Receiver
[    3.671422] usb 2-1.3: Manufacturer: Logitech
[    3.680732] usbcore: registered new interface driver usbhid
[    3.680735] usbhid: USB HID core driver
[    3.697559] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.0/input/input1
[    3.697627] logitech 0003:046D:C50C.0001: input,hidraw0: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input0
[    3.702394] logitech 0003:046D:C50C.0002: fixing up Logitech keyboard report descriptor
[    3.702809] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.3/2-1.3:1.1/input/input2
[    3.702924] logitech 0003:046D:C50C.0002: input,hiddev0,hidraw1: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.0-1.3/input1
[    3.981523] PM: Starting manual resume from disk
[    3.981527] PM: Hibernation image partition 8:6 present
[    3.981528] PM: Looking for hibernation image.
[    4.004688] PM: Image not found (code -22)
[    4.004694] PM: Hibernation image not present or could not be loaded.
[    4.122241] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    5.780080] <30>udev[342]: starting version 167
[    6.178339] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[    6.212647] ACPI: Battery Slot [BAT0] (battery absent)
[    6.212693] ACPI: Lid Switch [LID]
[    6.212775] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[    6.252098] ACPI: Sleep Button [SLPB]
[    6.252217] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
[    6.252263] ACPI: Power Button [PWRF]
[    6.344790] input: PC Speaker as /devices/platform/pcspkr/input/input6
[    6.359883] ACPI: acpi_idle registered with cpuidle
[    6.368691] wmi: Mapper loaded
[    6.388536] Monitor-Mwait will be used to enter C-1 state
[    6.388561] Monitor-Mwait will be used to enter C-3 state
[    6.388573] ACPI: AC Adapter [AC0] (on-line)
[    6.407460] elantech: assuming hardware version 2, firmware version 4.2.1
[    6.436283] elantech: Synaptics capabilities query result 0x78, 0x14, 0x0b.
[    6.517177] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input7
[    6.550125] cfg80211: Calling CRDA to update world regulatory domain
[    6.674979] Bluetooth: Core ver 2.15
[    6.675000] NET: Registered protocol family 31
[    6.675002] Bluetooth: HCI device and connection manager initialized
[    6.675005] Bluetooth: HCI socket layer initialized
[    6.707512] eeepc_wmi: No known WMI GUID found
[    7.032517] xhci_hcd 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
[    7.032550] xhci_hcd 0000:04:00.0: setting latency timer to 64
[    7.032555] xhci_hcd 0000:04:00.0: xHCI Host Controller
[    7.032564] xhci_hcd 0000:04:00.0: new USB bus registered, assigned bus number 3
[    7.193265] xhci_hcd 0000:04:00.0: irq 19, io mem 0xdd200000
[    7.193290] xhci_hcd 0000:04:00.0: Failed to enable MSI-X
[    7.193403] xhci_hcd 0000:04:00.0: irq 43 for MSI/MSI-X
[    7.193478] usb usb3: No SuperSpeed endpoint companion for config 1  interface 0 altsetting 0 ep 129: using minimum values
[    7.193485] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003
[    7.193487] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.193489] usb usb3: Product: xHCI Host Controller
[    7.193491] usb usb3: Manufacturer: Linux 2.6.38-2-amd64 xhci_hcd
[    7.193492] usb usb3: SerialNumber: 0000:04:00.0
[    7.193579] xHCI xhci_add_endpoint called for root hub
[    7.193581] xHCI xhci_check_bandwidth called for root hub
[    7.193623] hub 3-0:1.0: USB hub found
[    7.193628] hub 3-0:1.0: 2 ports detected
[    7.242663] Bluetooth: Generic Bluetooth USB driver ver 0.6
[    7.242901] usbcore: registered new interface driver btusb
[    7.660007] Linux video capture interface: v2.00
[    7.691734] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    7.691740] ACPI: resource 0000:00:1f.3 [io  0xe040-0xe05f] conflicts with ACPI region SMBI [io 0xe040-0xe04f]
[    7.691742] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    7.701053] Error: Driver 'pcspkr' is already registered, aborting...
[    7.733333] uvcvideo: Found UVC 1.00 device USB2.0 UVC 2M WebCam (13d3:5122)
[    7.744342] input: USB2.0 UVC 2M WebCam as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input8
[    7.744482] usbcore: registered new interface driver uvcvideo
[    7.744484] USB Video Class driver (v1.0.0)
[    7.750584] [drm] Initialized drm 1.1.0 20060810
[    7.771245] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[    7.771306] HDA Intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[    7.771332] HDA Intel 0000:00:1b.0: setting latency timer to 64
[    7.865387] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    7.865400] ath9k 0000:03:00.0: setting latency timer to 64
[    7.915255] ath: EEPROM regdomain: 0x60
[    7.915257] ath: EEPROM indicates we should expect a direct regpair map
[    7.915261] ath: Country alpha2 being used: 00
[    7.915262] ath: Regpair used: 0x60
[    8.229491] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
[    8.229949] Registered led device: ath9k-phy0::radio
[    8.229975] Registered led device: ath9k-phy0::assoc
[    8.230002] Registered led device: ath9k-phy0::tx
[    8.230028] Registered led device: ath9k-phy0::rx
[    8.230034] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc900050c0000, irq=17
[    8.420942] hda_codec: ALC269VB: BIOS auto-probing.
[    8.544126] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[    8.544188] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[    8.544330] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    8.544335] i915 0000:00:02.0: setting latency timer to 64
[    8.600782] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[    8.600787] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[    8.600789] [drm] Driver supports precise vblank timestamp query.
[    8.696224] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[    8.696227] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[    8.940516] Console: switching to colour frame buffer device 170x48
[    8.943254] fb0: inteldrmfb frame buffer device
[    8.943256] drm: registered panic notifier
[    8.944367] ACPI Warning: _BQC returned an invalid level (20110112/video-473)
[    8.944665] acpi device:04: registered as cooling_device4
[    8.944760] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input11
[    8.944834] ACPI: Video Device [GFX0] (multi-head: yes  rom: yes  post: no)
[    8.964580] ACPI Warning: _BQC returned an invalid level (20110112/video-473)
[    8.965123] acpi device:48: registered as cooling_device5
[    8.965606] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input12
[    8.965675] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    8.965828] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   10.167089] Adding 7750652k swap on /dev/sda6.  Priority:-1 extents:1 across:7750652k 
[   10.170207] EXT4-fs (sda5): re-mounted. Opts: (null)
[   10.508167] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   10.671223] loop: module loaded
[   10.809247] Disabling lock debugging due to kernel taint
[   10.809815] Found VGA device 0000:00:02.0 (\_SB_.PCI0.GFX0): IGD
[   10.809918] Found VGA device 0000:01:00.0 (\_SB_.PCI0.PEG0.GFX0): DIS
[   10.809921] Asus switcheroo: detected DSM switching method \_SB_.PCI0.PEG0.GFX0 handle
[   10.855489] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff880147c01ab0 (20110112/exresop-590)
[   10.855496] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20110112/dswexec-460)
[   10.855502] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff88014b652dc0), AE_AML_OPERAND_TYPE (20110112/psparse-536)
[   10.855511] failed to evaluate _DSM: 12291
[   10.855540] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff880147c01c18 (20110112/exresop-590)
[   10.855543] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20110112/dswexec-460)
[   10.855548] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff88014b652dc0), AE_AML_OPERAND_TYPE (20110112/psparse-536)
[   10.855554] ACPI Error: Method parse/execution failed [\_SB_.PCI0.PEG0.GFX0._DSM] (Node ffff88014b66c370), AE_AML_OPERAND_TYPE (20110112/psparse-536)
[   10.855562] failed to evaluate _DSM: 12291
[   10.855566] VGA switcheroo: detected DSM switching method \_SB_.PCI0.PEG0.GFX0 handle
[   10.855613] nouveau 0000:01:00.0: power state changed by ACPI to D0
[   10.855616] nouveau 0000:01:00.0: power state changed by ACPI to D0
[   10.855620] nouveau 0000:01:00.0: enabling device (0000 -> 0003)
[   10.855626] nouveau 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   10.855631] nouveau 0000:01:00.0: setting latency timer to 64
[   10.858612] [drm] nouveau 0000:01:00.0: Detected an NVc0 generation card (0x0c1a00a1)
[   10.864730] vga_switcheroo: enabled
[   10.864741] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PRAMIN
[   10.874457] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[   10.874459] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PROM
[   10.874467] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[   10.874469] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from PCIROM
[   10.884286] nouveau 0000:01:00.0: Invalid ROM contents
[   10.884369] [drm] nouveau 0000:01:00.0: ... BIOS signature not found
[   10.884371] [drm] nouveau 0000:01:00.0: Attempting to load BIOS image from ACPI
[   10.972978] [drm] nouveau 0000:01:00.0: ... appears to be valid
[   10.972981] [drm] nouveau 0000:01:00.0: BIT BIOS found
[   10.972984] [drm] nouveau 0000:01:00.0: Bios version 70.08.45.00
[   10.972986] [drm] nouveau 0000:01:00.0: Pointer to BIT loadval table invalid
[   10.973019] [drm] nouveau 0000:01:00.0: TMDS table version 2.0
[   10.973021] [drm] nouveau 0000:01:00.0: Found Display Configuration Block version 4.0
[   10.973024] [drm] nouveau 0000:01:00.0: Raw DCB entry 0: 02000300 00000000
[   10.973027] [drm] nouveau 0000:01:00.0: Raw DCB entry 1: 0000000e 00000000
[   10.973030] [drm] nouveau 0000:01:00.0: DCB connector table: VHER 0x40 5 16 4
[   10.973032] [drm] nouveau 0000:01:00.0:   0: 0x00000000: type 0x00 idx 0 tag 0xff
[   10.973046] [drm] nouveau 0000:01:00.0: Adaptor not initialised, running VBIOS init tables.
[   10.973048] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 0 at offset 0xD56E
[   10.997068] [drm] nouveau 0000:01:00.0: 0xD518: i2c wr fail: -6
[   11.041686] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 1 at offset 0xDBBD
[   11.097660] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 2 at offset 0xEDC3
[   11.097673] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 3 at offset 0xEDC7
[   11.097737] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table 4 at offset 0xEEAF
[   11.097739] [drm] nouveau 0000:01:00.0: Parsing VBIOS init table at offset 0xEF14
[   11.140307] [drm] nouveau 0000:01:00.0: 3 available performance level(s)
[   11.140312] [drm] nouveau 0000:01:00.0: 0: memory 135MHz core 270MHz shader 540MHz voltage 830mV
[   11.140315] [drm] nouveau 0000:01:00.0: 1: memory 405MHz core 270MHz shader 810MHz voltage 830mV
[   11.140318] [drm] nouveau 0000:01:00.0: 3: memory 405MHz core 1070MHz shader 1344MHz voltage 980mV
[   11.140390] [TTM] Zone  kernel: Available graphics memory: 1984826 kiB.
[   11.140392] [TTM] Initializing pool allocator.
[   11.140403] [drm] nouveau 0000:01:00.0: Detected 512MiB VRAM
[   11.159968] [drm] nouveau 0000:01:00.0: 512 MiB GART (aperture)
[   11.159977] [drm] nouveau 0000:01:00.0: PGRAPH: unsupported chipset, please report!
[   11.160160] [drm] nouveau 0000:01:00.0: PGRAPH: unknown config: 2/0/0/0, 1
[   11.383423] [drm] nouveau 0000:01:00.0: failed to load fuc409d
[   11.391846] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[   11.391849] [drm] No driver support for vblank timestamp query.
[   11.391860] [drm] nouveau 0000:01:00.0: ACPI backlight interface available, not registering our own
[   11.442393] [drm] nouveau 0000:01:00.0: allocated 1024x768 fb: 0x30000000, bo ffff880149b51800
[   11.442458] fb1: nouveaufb frame buffer device
[   11.442465] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 1
[   12.127155] EXT3-fs: barriers not enabled
[   12.127520] kjournald starting.  Commit interval 5 seconds
[   12.127866] EXT3-fs (sda3): using internal journal
[   12.127874] EXT3-fs (sda3): mounted filesystem with ordered data mode
[   13.369836] RPC: Registered udp transport module.
[   13.369839] RPC: Registered tcp transport module.
[   13.369841] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   13.457596] FS-Cache: Loaded
[   13.537476] FS-Cache: Netfs 'nfs' registered for caching
[   13.600230] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[   13.932803] fuse init (API version 7.16)
[   15.580019] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input13
[   17.792946] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[   17.819251] r8169 0000:05:00.0: eth0: link down
[   17.819607] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.208118] Bluetooth: L2CAP ver 2.15
[   20.208120] Bluetooth: L2CAP socket layer initialized
[   20.272369] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   20.272371] Bluetooth: BNEP filters: protocol multicast
[   20.649108] Bluetooth: SCO (Voice Link) ver 0.6
[   20.649110] Bluetooth: SCO socket layer initialized
[   20.814747] lp: driver loaded but no devices found
[   20.847505] Bluetooth: RFCOMM TTY layer initialized
[   20.847516] Bluetooth: RFCOMM socket layer initialized
[   20.847521] Bluetooth: RFCOMM ver 1.11
[   20.849462] ppdev: user-space parallel port driver
[   39.888844] start_kdeinit (2345): /proc/2347/oom_adj is deprecated, please use /proc/2347/oom_score_adj instead.
[   42.311175] CPUFREQ: Per core ondemand sysfs interface is deprecated - up_threshold
[   43.063562] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[   45.314821] wlan0: authenticate with 00:1a:2b:3d:8e:2e (try 1)
[   45.316773] wlan0: authenticated
[   45.316795] wlan0: associate with 00:1a:2b:3d:8e:2e (try 1)
[   45.319347] wlan0: RX AssocResp from 00:1a:2b:3d:8e:2e (capab=0x411 status=0 aid=4)
[   45.319351] wlan0: associated
[   45.319832] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[   45.390473] Intel AES-NI instructions are not detected.
[   45.456848] padlock_aes: VIA PadLock not detected.
[   55.746686] wlan0: no IPv6 routers present

[-- Attachment #3: Type: text/plain, Size: 181 bytes --]

_______________________________________________
Nouveau mailing list
Nouveau-PD4FTy7X32lNgt0PjOBp9y5qC8QIuHrW@public.gmane.org
http://lists.freedesktop.org/mailman/listinfo/nouveau