All of lore.kernel.org
 help / color / mirror / Atom feed
From: Markus Armbruster <armbru@redhat.com>
To: qemu-devel@nongnu.org
Cc: kwolf@redhat.com, kraxel@redhat.com, hch@lst.de
Subject: [Qemu-devel] [PATCH v3 2/6] scsi: Split qdev "scsi-disk" into "scsi-hd" and "scsi-cd"
Date: Thu, 12 May 2011 17:05:11 +0200	[thread overview]
Message-ID: <1305212715-26767-3-git-send-email-armbru@redhat.com> (raw)
In-Reply-To: <1305212715-26767-1-git-send-email-armbru@redhat.com>

A "scsi-disk" is either a hard disk or a CD-ROM, depending on the
associated BlockDriverState's type hint.  Unclean; disk vs. CD belongs
to the guest part, not the host part.

Have separate qdevs "scsi-hd" and "scsi-cd" to model disk vs. CD in
the guest part.

Keep scsi-disk for backward compatibility.

Don't copy scsi-disk property removable to scsi-cd.  It's not used and
always zero(!) there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
---
 hw/scsi-disk.c |  136 ++++++++++++++++++++++++++++++++++++++++++--------------
 1 files changed, 103 insertions(+), 33 deletions(-)

diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index b05e654..8df8518 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -65,6 +65,8 @@ typedef struct SCSIDiskReq {
     uint32_t status;
 } SCSIDiskReq;
 
+typedef enum { SCSI_HD, SCSI_CD } SCSIDriveKind;
+
 struct SCSIDiskState
 {
     SCSIDevice qdev;
@@ -78,6 +80,7 @@ struct SCSIDiskState
     char *version;
     char *serial;
     SCSISense sense;
+    SCSIDriveKind drive_kind;
 };
 
 static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type);
@@ -406,7 +409,7 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
             return -1;
         }
 
-        if (bdrv_get_type_hint(s->bs) == BDRV_TYPE_CDROM) {
+        if (s->drive_kind == SCSI_CD) {
             outbuf[buflen++] = 5;
         } else {
             outbuf[buflen++] = 0;
@@ -424,7 +427,7 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
             outbuf[buflen++] = 0x00; // list of supported pages (this page)
             outbuf[buflen++] = 0x80; // unit serial number
             outbuf[buflen++] = 0x83; // device identification
-            if (bdrv_get_type_hint(s->bs) != BDRV_TYPE_CDROM) {
+            if (s->drive_kind == SCSI_HD) {
                 outbuf[buflen++] = 0xb0; // block limits
                 outbuf[buflen++] = 0xb2; // thin provisioning
             }
@@ -477,7 +480,7 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
             unsigned int opt_io_size =
                     s->qdev.conf.opt_io_size / s->qdev.blocksize;
 
-            if (bdrv_get_type_hint(s->bs) == BDRV_TYPE_CDROM) {
+            if (s->drive_kind == SCSI_CD) {
                 DPRINTF("Inquiry (EVPD[%02X] not supported for CDROM\n",
                         page_code);
                 return -1;
@@ -547,7 +550,7 @@ static int scsi_disk_emulate_inquiry(SCSIRequest *req, uint8_t *outbuf)
         return buflen;
     }
 
-    if (bdrv_get_type_hint(s->bs) == BDRV_TYPE_CDROM) {
+    if (s->drive_kind == SCSI_CD) {
         outbuf[0] = 5;
         outbuf[1] = 0x80;
         memcpy(&outbuf[16], "QEMU CD-ROM     ", 16);
@@ -678,7 +681,7 @@ static int mode_sense_page(SCSIRequest *req, int page, uint8_t *p,
         return p[1] + 2;
 
     case 0x2a: /* CD Capabilities and Mechanical Status page. */
-        if (bdrv_get_type_hint(bdrv) != BDRV_TYPE_CDROM)
+        if (s->drive_kind != SCSI_CD)
             return 0;
         p[0] = 0x2a;
         p[1] = 0x14;
@@ -905,7 +908,7 @@ static int scsi_disk_emulate_command(SCSIDiskReq *r, uint8_t *outbuf)
             goto illegal_request;
         break;
     case START_STOP:
-        if (bdrv_get_type_hint(s->bs) == BDRV_TYPE_CDROM && (req->cmd.buf[4] & 2)) {
+        if (s->drive_kind == SCSI_CD && (req->cmd.buf[4] & 2)) {
             /* load/eject medium */
             bdrv_eject(s->bs, !(req->cmd.buf[4] & 1));
         }
@@ -1232,10 +1235,9 @@ static void scsi_destroy(SCSIDevice *dev)
     blockdev_mark_auto_del(s->qdev.conf.bs);
 }
 
-static int scsi_disk_initfn(SCSIDevice *dev)
+static int scsi_initfn(SCSIDevice *dev, SCSIDriveKind kind)
 {
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, dev);
-    int is_cd;
     DriveInfo *dinfo;
 
     if (!s->qdev.conf.bs) {
@@ -1243,9 +1245,9 @@ static int scsi_disk_initfn(SCSIDevice *dev)
         return -1;
     }
     s->bs = s->qdev.conf.bs;
-    is_cd = bdrv_get_type_hint(s->bs) == BDRV_TYPE_CDROM;
+    s->drive_kind = kind;
 
-    if (!is_cd && !bdrv_is_inserted(s->bs)) {
+    if (kind == SCSI_HD && !bdrv_is_inserted(s->bs)) {
         error_report("Device needs media, but drive is empty");
         return -1;
     }
@@ -1265,7 +1267,7 @@ static int scsi_disk_initfn(SCSIDevice *dev)
         return -1;
     }
 
-    if (is_cd) {
+    if (kind == SCSI_CD) {
         s->qdev.blocksize = 2048;
     } else {
         s->qdev.blocksize = s->qdev.conf.logical_block_size;
@@ -1275,35 +1277,103 @@ static int scsi_disk_initfn(SCSIDevice *dev)
 
     s->qdev.type = TYPE_DISK;
     qemu_add_vm_change_state_handler(scsi_dma_restart_cb, s);
-    bdrv_set_removable(s->bs, is_cd);
+    bdrv_set_removable(s->bs, kind == SCSI_CD);
     add_boot_device_path(s->qdev.conf.bootindex, &dev->qdev, ",0");
     return 0;
 }
 
-static SCSIDeviceInfo scsi_disk_info = {
-    .qdev.name    = "scsi-disk",
-    .qdev.fw_name = "disk",
-    .qdev.desc    = "virtual scsi disk or cdrom",
-    .qdev.size    = sizeof(SCSIDiskState),
-    .qdev.reset   = scsi_disk_reset,
-    .init         = scsi_disk_initfn,
-    .destroy      = scsi_destroy,
-    .send_command = scsi_send_command,
-    .read_data    = scsi_read_data,
-    .write_data   = scsi_write_data,
-    .cancel_io    = scsi_cancel_io,
-    .get_buf      = scsi_get_buf,
-    .qdev.props   = (Property[]) {
-        DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf),
-        DEFINE_PROP_STRING("ver",  SCSIDiskState, version),
-        DEFINE_PROP_STRING("serial",  SCSIDiskState, serial),
-        DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
-        DEFINE_PROP_END_OF_LIST(),
-    },
+static int scsi_hd_initfn(SCSIDevice *dev)
+{
+    return scsi_initfn(dev, SCSI_HD);
+}
+
+static int scsi_cd_initfn(SCSIDevice *dev)
+{
+    return scsi_initfn(dev, SCSI_CD);
+}
+
+static int scsi_disk_initfn(SCSIDevice *dev)
+{
+    SCSIDriveKind kind;
+
+    if (!dev->conf.bs) {
+        kind = SCSI_HD;         /* will die in scsi_initfn() */
+    } else {
+        kind = bdrv_get_type_hint(dev->conf.bs) == BDRV_TYPE_CDROM
+            ? SCSI_CD : SCSI_HD;
+    }
+
+    return scsi_initfn(dev, kind);
+}
+
+#define DEFINE_SCSI_DISK_PROPERTIES()                           \
+    DEFINE_BLOCK_PROPERTIES(SCSIDiskState, qdev.conf),          \
+    DEFINE_PROP_STRING("ver",  SCSIDiskState, version),         \
+    DEFINE_PROP_STRING("serial",  SCSIDiskState, serial)
+
+static SCSIDeviceInfo scsi_disk_info[] = {
+    {
+        .qdev.name    = "scsi-hd",
+        .qdev.fw_name = "disk",
+        .qdev.desc    = "virtual SCSI disk",
+        .qdev.size    = sizeof(SCSIDiskState),
+        .qdev.reset   = scsi_disk_reset,
+        .init         = scsi_hd_initfn,
+        .destroy      = scsi_destroy,
+        .send_command = scsi_send_command,
+        .read_data    = scsi_read_data,
+        .write_data   = scsi_write_data,
+        .cancel_io    = scsi_cancel_io,
+        .get_buf      = scsi_get_buf,
+        .qdev.props   = (Property[]) {
+            DEFINE_SCSI_DISK_PROPERTIES(),
+            DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
+            DEFINE_PROP_END_OF_LIST(),
+        }
+    },{
+        .qdev.name    = "scsi-cd",
+        .qdev.fw_name = "disk",
+        .qdev.desc    = "virtual SCSI CD-ROM",
+        .qdev.size    = sizeof(SCSIDiskState),
+        .qdev.reset   = scsi_disk_reset,
+        .init         = scsi_cd_initfn,
+        .destroy      = scsi_destroy,
+        .send_command = scsi_send_command,
+        .read_data    = scsi_read_data,
+        .write_data   = scsi_write_data,
+        .cancel_io    = scsi_cancel_io,
+        .get_buf      = scsi_get_buf,
+        .qdev.props   = (Property[]) {
+            DEFINE_SCSI_DISK_PROPERTIES(),
+            DEFINE_PROP_END_OF_LIST(),
+        },
+    },{
+        .qdev.name    = "scsi-disk", /* legacy -device scsi-disk */
+        .qdev.fw_name = "disk",
+        .qdev.desc    = "virtual SCSI disk or CD-ROM (legacy)",
+        .qdev.size    = sizeof(SCSIDiskState),
+        .qdev.reset   = scsi_disk_reset,
+        .init         = scsi_disk_initfn,
+        .destroy      = scsi_destroy,
+        .send_command = scsi_send_command,
+        .read_data    = scsi_read_data,
+        .write_data   = scsi_write_data,
+        .cancel_io    = scsi_cancel_io,
+        .get_buf      = scsi_get_buf,
+        .qdev.props   = (Property[]) {
+            DEFINE_SCSI_DISK_PROPERTIES(),
+            DEFINE_PROP_BIT("removable", SCSIDiskState, removable, 0, false),
+            DEFINE_PROP_END_OF_LIST(),
+        }
+    }
 };
 
 static void scsi_disk_register_devices(void)
 {
-    scsi_qdev_register(&scsi_disk_info);
+    int i;
+
+    for (i = 0; i < ARRAY_SIZE(scsi_disk_info); i++) {
+        scsi_qdev_register(&scsi_disk_info[i]);
+    }
 }
 device_init(scsi_disk_register_devices)
-- 
1.7.2.3

  parent reply	other threads:[~2011-05-12 15:05 UTC|newest]

Thread overview: 17+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-05-12 15:05 [Qemu-devel] [PATCH v2 0/5] Split ide-drive and scsi-disk qdevs, and more Markus Armbruster
2011-05-12 15:05 ` [Qemu-devel] [PATCH v3 1/6] ide: Split qdev "ide-drive" into "ide-hd" and "ide-cd" Markus Armbruster
2011-05-12 15:05 ` Markus Armbruster [this message]
2011-05-12 15:05 ` [Qemu-devel] [PATCH v3 3/6] block QMP: Drop query-block member "type" (type= in info block) Markus Armbruster
2011-05-12 17:01   ` Luiz Capitulino
2011-05-12 17:12     ` Markus Armbruster
2011-05-12 17:22       ` Luiz Capitulino
2011-05-12 17:54         ` Markus Armbruster
2011-05-12 18:36           ` Luiz Capitulino
2011-05-13  8:26             ` Markus Armbruster
2011-05-13 13:39               ` Luiz Capitulino
2011-05-13 14:13                 ` Markus Armbruster
2011-05-13 15:09                   ` Luiz Capitulino
2011-05-12 15:05 ` [Qemu-devel] [PATCH v3 4/6] blockdev: Store -drive option media in DriveInfo Markus Armbruster
2011-05-12 15:05 ` [Qemu-devel] [PATCH v3 5/6] block: Remove type hint, it's guest matter, doesn't belong here Markus Armbruster
2011-05-12 15:05 ` [Qemu-devel] [PATCH v3 6/6] defaults: ide-cd and scsi-cd devices suppress default CD-ROM Markus Armbruster
2011-05-12 15:56 ` [Qemu-devel] [PATCH v2 0/5] Split ide-drive and scsi-disk qdevs, and more Markus Armbruster

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1305212715-26767-3-git-send-email-armbru@redhat.com \
    --to=armbru@redhat.com \
    --cc=hch@lst.de \
    --cc=kraxel@redhat.com \
    --cc=kwolf@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.