From: Tejun Heo <tj@kernel.org>
To: oleg@redhat.com
Cc: vda.linux@googlemail.com, jan.kratochvil@redhat.com,
linux-kernel@vger.kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, indan@nul.nu, bdonlan@gmail.com,
pedro@codesourcery.com, Tejun Heo <tj@kernel.org>
Subject: [PATCH 09/17] signal: remove three noop tracehooks
Date: Mon, 30 May 2011 01:12:32 +0200 [thread overview]
Message-ID: <1306710760-16440-10-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1306710760-16440-1-git-send-email-tj@kernel.org>
Remove the following three noop tracehooks in signals.c.
* tracehook_force_sigpending()
* tracehook_get_signal()
* tracehook_finish_jctl()
The code area is about to be updated and these hooks don't do anything
other than obfuscating the logic.
Signed-off-by: Tejun Heo <tj@kernel.org>
---
include/linux/tracehook.h | 52 ---------------------------------------------
kernel/signal.c | 44 ++++++++++++--------------------------
2 files changed, 14 insertions(+), 82 deletions(-)
diff --git a/include/linux/tracehook.h b/include/linux/tracehook.h
index e95f523..15745cd 100644
--- a/include/linux/tracehook.h
+++ b/include/linux/tracehook.h
@@ -425,58 +425,6 @@ static inline int tracehook_consider_fatal_signal(struct task_struct *task,
return (task_ptrace(task) & PT_PTRACED) != 0;
}
-/**
- * tracehook_force_sigpending - let tracing force signal_pending(current) on
- *
- * Called when recomputing our signal_pending() flag. Return nonzero
- * to force the signal_pending() flag on, so that tracehook_get_signal()
- * will be called before the next return to user mode.
- *
- * Called with @current->sighand->siglock held.
- */
-static inline int tracehook_force_sigpending(void)
-{
- return 0;
-}
-
-/**
- * tracehook_get_signal - deliver synthetic signal to traced task
- * @task: @current
- * @regs: task_pt_regs(@current)
- * @info: details of synthetic signal
- * @return_ka: sigaction for synthetic signal
- *
- * Return zero to check for a real pending signal normally.
- * Return -1 after releasing the siglock to repeat the check.
- * Return a signal number to induce an artificial signal delivery,
- * setting *@info and *@return_ka to specify its details and behavior.
- *
- * The @return_ka->sa_handler value controls the disposition of the
- * signal, no matter the signal number. For %SIG_DFL, the return value
- * is a representative signal to indicate the behavior (e.g. %SIGTERM
- * for death, %SIGQUIT for core dump, %SIGSTOP for job control stop,
- * %SIGTSTP for stop unless in an orphaned pgrp), but the signal number
- * reported will be @info->si_signo instead.
- *
- * Called with @task->sighand->siglock held, before dequeuing pending signals.
- */
-static inline int tracehook_get_signal(struct task_struct *task,
- struct pt_regs *regs,
- siginfo_t *info,
- struct k_sigaction *return_ka)
-{
- return 0;
-}
-
-/**
- * tracehook_finish_jctl - report about return from job control stop
- *
- * This is called by do_signal_stop() after wakeup.
- */
-static inline void tracehook_finish_jctl(void)
-{
-}
-
#define DEATH_REAP -1
#define DEATH_DELAYED_GROUP_LEADER -2
diff --git a/kernel/signal.c b/kernel/signal.c
index 172a4c7..c99b8b5 100644
--- a/kernel/signal.c
+++ b/kernel/signal.c
@@ -150,9 +150,7 @@ void recalc_sigpending_and_wake(struct task_struct *t)
void recalc_sigpending(void)
{
- if (unlikely(tracehook_force_sigpending()))
- set_thread_flag(TIF_SIGPENDING);
- else if (!recalc_sigpending_tsk(current) && !freezing(current))
+ if (!recalc_sigpending_tsk(current) && !freezing(current))
clear_thread_flag(TIF_SIGPENDING);
}
@@ -2005,8 +2003,6 @@ retry:
spin_unlock_irq(¤t->sighand->siglock);
- tracehook_finish_jctl();
-
return 1;
}
@@ -2109,37 +2105,25 @@ relock:
for (;;) {
struct k_sigaction *ka;
- /*
- * Tracing can induce an artificial signal and choose sigaction.
- * The return value in @signr determines the default action,
- * but @info->si_signo is the signal number we will report.
- */
- signr = tracehook_get_signal(current, regs, info, return_ka);
- if (unlikely(signr < 0))
+
+ if (unlikely(current->jobctl & JOBCTL_STOP_PENDING) &&
+ do_signal_stop(0))
goto relock;
- if (unlikely(signr != 0))
- ka = return_ka;
- else {
- if (unlikely(current->jobctl & JOBCTL_STOP_PENDING) &&
- do_signal_stop(0))
- goto relock;
- signr = dequeue_signal(current, ¤t->blocked,
- info);
+ signr = dequeue_signal(current, ¤t->blocked, info);
- if (!signr)
- break; /* will return 0 */
+ if (!signr)
+ break; /* will return 0 */
- if (signr != SIGKILL) {
- signr = ptrace_signal(signr, info,
- regs, cookie);
- if (!signr)
- continue;
- }
-
- ka = &sighand->action[signr-1];
+ if (signr != SIGKILL) {
+ signr = ptrace_signal(signr, info,
+ regs, cookie);
+ if (!signr)
+ continue;
}
+ ka = &sighand->action[signr-1];
+
/* Trace actually delivered signals. */
trace_signal_deliver(signr, info, ka);
--
1.7.5.2
next prev parent reply other threads:[~2011-05-29 23:13 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-29 23:12 [PATCHSET ptrace] ptrace: implement PTRACE_SEIZE/INTERRUPT and group stop notification, take#4 Tejun Heo
2011-05-29 23:12 ` [PATCH 01/17] ptrace: remove silly wait_trap variable from ptrace_attach() Tejun Heo
2011-06-01 18:47 ` Oleg Nesterov
2011-06-02 5:03 ` Tejun Heo
2011-06-02 11:39 ` [PATCH UPDATED " Tejun Heo
2011-05-29 23:12 ` [PATCH 02/17] job control: rename signal->group_stop and flags to jobctl and update them Tejun Heo
2011-05-29 23:12 ` [PATCH 03/17] ptrace: ptrace_check_attach(): rename @kill to @ignore_state and add comments Tejun Heo
2011-05-29 23:12 ` [PATCH 04/17] ptrace: relocate set_current_state(TASK_TRACED) in ptrace_stop() Tejun Heo
2011-05-29 23:12 ` [PATCH 05/17] job control: introduce JOBCTL_PENDING_MASK and task_clear_jobctl_pending() Tejun Heo
2011-05-29 23:12 ` [PATCH 06/17] job control: make task_clear_jobctl_pending() clear TRAPPING automatically Tejun Heo
2011-05-29 23:12 ` [PATCH 07/17] job control: introduce task_set_jobctl_pending() Tejun Heo
2011-05-29 23:12 ` [PATCH 08/17] ptrace: use bit_waitqueue for TRAPPING instead of wait_chldexit Tejun Heo
2011-06-02 11:41 ` [PATCH UPDATED " Tejun Heo
2011-05-29 23:12 ` Tejun Heo [this message]
2011-05-29 23:12 ` [PATCH 10/17] job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap Tejun Heo
2011-05-29 23:12 ` [PATCH 11/17] ptrace: implement PTRACE_SEIZE Tejun Heo
2011-06-01 19:01 ` Oleg Nesterov
2011-06-01 19:55 ` Oleg Nesterov
2011-06-02 5:13 ` Tejun Heo
2011-06-02 11:43 ` [PATCH UPDATED " Tejun Heo
2011-05-29 23:12 ` [PATCH 12/17] ptrace: implement PTRACE_INTERRUPT Tejun Heo
2011-05-29 23:12 ` [PATCH 13/17] ptrace: add siginfo.si_pt_flags Tejun Heo
2011-05-29 23:12 ` [PATCH 14/17] ptrace: make group stop state visible via PTRACE_GETSIGINFO Tejun Heo
2011-05-29 23:12 ` [PATCH 15/17] ptrace: don't let PTRACE_SETSIGINFO override __SI_TRAP siginfo Tejun Heo
2011-05-29 23:12 ` [PATCH 16/17] ptrace: implement TRAP_NOTIFY and use it for group stop events Tejun Heo
2011-05-29 23:12 ` [PATCH 17/17] ptrace: implement PTRACE_LISTEN Tejun Heo
2011-06-02 17:33 ` Oleg Nesterov
2011-06-13 14:10 ` Tejun Heo
2011-06-13 20:33 ` Oleg Nesterov
2011-06-14 6:45 ` Tejun Heo
2011-05-30 15:42 ` [PATCHSET ptrace] ptrace: implement PTRACE_SEIZE/INTERRUPT and group stop notification, take#4 Oleg Nesterov
2011-06-01 5:39 ` Tejun Heo
2011-06-02 12:31 ` Tejun Heo
2011-06-02 14:51 ` Denys Vlasenko
2011-06-03 1:24 ` Tejun Heo
2011-06-03 10:25 ` Pedro Alves
2011-06-16 8:38 ` Tejun Heo
2011-06-16 9:56 ` Pedro Alves
2011-06-17 19:08 ` Oleg Nesterov
2011-06-03 11:57 ` Denys Vlasenko
2011-06-03 12:11 ` Pedro Alves
2011-06-03 14:12 ` Denys Vlasenko
2011-06-03 15:24 ` Pedro Alves
2011-06-03 15:46 ` Oleg Nesterov
2011-06-02 18:27 ` Oleg Nesterov
2011-06-02 21:09 ` Denys Vlasenko
2011-06-03 1:34 ` Tejun Heo
2011-06-03 11:37 ` Denys Vlasenko
2011-06-03 11:58 ` Denys Vlasenko
2011-06-03 15:37 ` Oleg Nesterov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306710760-16440-10-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=bdonlan@gmail.com \
--cc=indan@nul.nu \
--cc=jan.kratochvil@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=oleg@redhat.com \
--cc=pedro@codesourcery.com \
--cc=torvalds@linux-foundation.org \
--cc=vda.linux@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.