From: Tejun Heo <tj@kernel.org>
To: oleg@redhat.com
Cc: vda.linux@googlemail.com, jan.kratochvil@redhat.com,
linux-kernel@vger.kernel.org, torvalds@linux-foundation.org,
akpm@linux-foundation.org, indan@nul.nu, bdonlan@gmail.com,
pedro@codesourcery.com, Tejun Heo <tj@kernel.org>
Subject: [PATCH 12/17] ptrace: implement PTRACE_INTERRUPT
Date: Mon, 30 May 2011 01:12:35 +0200 [thread overview]
Message-ID: <1306710760-16440-13-git-send-email-tj@kernel.org> (raw)
In-Reply-To: <1306710760-16440-1-git-send-email-tj@kernel.org>
Currently, there's no way to trap a running ptracee short of sending a
signal which has various side effects. This patch implements
PTRACE_INTERRUPT which traps ptracee without any signal or job control
related side effect.
The implementation is almost trivial. It uses the group stop trap -
SIGTRAP | PTRACE_EVENT_STOP << 8. A new trap flag
JOBCTL_TRAP_INTERRUPT is added, which is set on PTRACE_INTERRUPT and
cleared when any trap happens. As INTERRUPT should be useable
regardless of the current state of tracee, task_is_traced() test in
ptrace_check_attach() is skipped for INTERRUPT.
PTRACE_INTERRUPT is available iff tracee is attached with
PTRACE_SEIZE.
Test program follows.
#define PTRACE_SEIZE 0x4206
#define PTRACE_INTERRUPT 0x4207
#define PTRACE_SEIZE_DEVEL 0x80000000
static const struct timespec ts100ms = { .tv_nsec = 100000000 };
static const struct timespec ts1s = { .tv_sec = 1 };
static const struct timespec ts3s = { .tv_sec = 3 };
int main(int argc, char **argv)
{
pid_t tracee;
tracee = fork();
if (tracee == 0) {
nanosleep(&ts100ms, NULL);
while (1) {
printf("tracee: alive pid=%d\n", getpid());
nanosleep(&ts1s, NULL);
}
}
if (argc > 1)
kill(tracee, SIGSTOP);
nanosleep(&ts100ms, NULL);
ptrace(PTRACE_SEIZE, tracee, NULL,
(void *)(unsigned long)PTRACE_SEIZE_DEVEL);
if (argc > 1) {
waitid(P_PID, tracee, NULL, WSTOPPED);
ptrace(PTRACE_CONT, tracee, NULL, NULL);
}
nanosleep(&ts3s, NULL);
printf("tracer: INTERRUPT and DETACH\n");
ptrace(PTRACE_INTERRUPT, tracee, NULL, NULL);
waitid(P_PID, tracee, NULL, WSTOPPED);
ptrace(PTRACE_DETACH, tracee, NULL, NULL);
nanosleep(&ts3s, NULL);
printf("tracer: exiting\n");
kill(tracee, SIGKILL);
return 0;
}
When called without argument, tracee is seized from running state,
interrupted and then detached back to running state.
# ./test-interrupt
tracee: alive pid=4546
tracee: alive pid=4546
tracee: alive pid=4546
tracer: INTERRUPT and DETACH
tracee: alive pid=4546
tracee: alive pid=4546
tracee: alive pid=4546
tracer: exiting
When called with argument, tracee is seized from stopped state,
continued, interrupted and then detached back to stopped state.
# ./test-interrupt 1
tracee: alive pid=4548
tracee: alive pid=4548
tracee: alive pid=4548
tracer: INTERRUPT and DETACH
tracer: exiting
Before PTRACE_INTERRUPT, once the tracee was running, there was no way
to trap tracee and do PTRACE_DETACH without causing side effect.
-v2: Updated to use task_set_jobctl_pending() so that it doesn't end
up scheduling TRAP_STOP if child is dying which may make the
child unkillable. Spotted by Oleg.
Signed-off-by: Tejun Heo <tj@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
---
include/linux/ptrace.h | 1 +
kernel/ptrace.c | 29 +++++++++++++++++++++++++++--
2 files changed, 28 insertions(+), 2 deletions(-)
diff --git a/include/linux/ptrace.h b/include/linux/ptrace.h
index 67ad3f1..ad754d1 100644
--- a/include/linux/ptrace.h
+++ b/include/linux/ptrace.h
@@ -48,6 +48,7 @@
#define PTRACE_SETREGSET 0x4205
#define PTRACE_SEIZE 0x4206
+#define PTRACE_INTERRUPT 0x4207
/* flags in @data for PTRACE_SEIZE */
#define PTRACE_SEIZE_DEVEL 0x80000000 /* temp flag for development */
diff --git a/kernel/ptrace.c b/kernel/ptrace.c
index 07505aa..d5e38ac 100644
--- a/kernel/ptrace.c
+++ b/kernel/ptrace.c
@@ -657,10 +657,12 @@ static int ptrace_regset(struct task_struct *task, int req, unsigned int type,
int ptrace_request(struct task_struct *child, long request,
unsigned long addr, unsigned long data)
{
+ bool seized = child->ptrace & PT_SEIZED;
int ret = -EIO;
siginfo_t siginfo;
void __user *datavp = (void __user *) data;
unsigned long __user *datalp = datavp;
+ unsigned long flags;
switch (request) {
case PTRACE_PEEKTEXT:
@@ -693,6 +695,27 @@ int ptrace_request(struct task_struct *child, long request,
ret = ptrace_setsiginfo(child, &siginfo);
break;
+ case PTRACE_INTERRUPT:
+ /*
+ * Stop tracee without any side-effect on signal or job
+ * control. At least one trap is guaranteed to happen
+ * after this request. If @child is already trapped, the
+ * current trap is not disturbed and another trap will
+ * happen after the current trap is ended with PTRACE_CONT.
+ *
+ * The actual trap might not be PTRACE_EVENT_STOP trap but
+ * the pending condition is cleared regardless.
+ */
+ if (unlikely(!seized || !lock_task_sighand(child, &flags)))
+ break;
+
+ if (likely(task_set_jobctl_pending(child, JOBCTL_TRAP_STOP)))
+ signal_wake_up(child, 0);
+
+ unlock_task_sighand(child, &flags);
+ ret = 0;
+ break;
+
case PTRACE_DETACH: /* detach a process that was attached. */
ret = ptrace_detach(child, data);
break;
@@ -818,7 +841,8 @@ SYSCALL_DEFINE4(ptrace, long, request, long, pid, unsigned long, addr,
goto out_put_task_struct;
}
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
+ ret = ptrace_check_attach(child, request == PTRACE_KILL ||
+ request == PTRACE_INTERRUPT);
if (ret < 0)
goto out_put_task_struct;
@@ -960,7 +984,8 @@ asmlinkage long compat_sys_ptrace(compat_long_t request, compat_long_t pid,
goto out_put_task_struct;
}
- ret = ptrace_check_attach(child, request == PTRACE_KILL);
+ ret = ptrace_check_attach(child, request == PTRACE_KILL ||
+ request == PTRACE_INTERRUPT);
if (!ret)
ret = compat_arch_ptrace(child, request, addr, data);
--
1.7.5.2
next prev parent reply other threads:[~2011-05-29 23:14 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-29 23:12 [PATCHSET ptrace] ptrace: implement PTRACE_SEIZE/INTERRUPT and group stop notification, take#4 Tejun Heo
2011-05-29 23:12 ` [PATCH 01/17] ptrace: remove silly wait_trap variable from ptrace_attach() Tejun Heo
2011-06-01 18:47 ` Oleg Nesterov
2011-06-02 5:03 ` Tejun Heo
2011-06-02 11:39 ` [PATCH UPDATED " Tejun Heo
2011-05-29 23:12 ` [PATCH 02/17] job control: rename signal->group_stop and flags to jobctl and update them Tejun Heo
2011-05-29 23:12 ` [PATCH 03/17] ptrace: ptrace_check_attach(): rename @kill to @ignore_state and add comments Tejun Heo
2011-05-29 23:12 ` [PATCH 04/17] ptrace: relocate set_current_state(TASK_TRACED) in ptrace_stop() Tejun Heo
2011-05-29 23:12 ` [PATCH 05/17] job control: introduce JOBCTL_PENDING_MASK and task_clear_jobctl_pending() Tejun Heo
2011-05-29 23:12 ` [PATCH 06/17] job control: make task_clear_jobctl_pending() clear TRAPPING automatically Tejun Heo
2011-05-29 23:12 ` [PATCH 07/17] job control: introduce task_set_jobctl_pending() Tejun Heo
2011-05-29 23:12 ` [PATCH 08/17] ptrace: use bit_waitqueue for TRAPPING instead of wait_chldexit Tejun Heo
2011-06-02 11:41 ` [PATCH UPDATED " Tejun Heo
2011-05-29 23:12 ` [PATCH 09/17] signal: remove three noop tracehooks Tejun Heo
2011-05-29 23:12 ` [PATCH 10/17] job control: introduce JOBCTL_TRAP_STOP and use it for group stop trap Tejun Heo
2011-05-29 23:12 ` [PATCH 11/17] ptrace: implement PTRACE_SEIZE Tejun Heo
2011-06-01 19:01 ` Oleg Nesterov
2011-06-01 19:55 ` Oleg Nesterov
2011-06-02 5:13 ` Tejun Heo
2011-06-02 11:43 ` [PATCH UPDATED " Tejun Heo
2011-05-29 23:12 ` Tejun Heo [this message]
2011-05-29 23:12 ` [PATCH 13/17] ptrace: add siginfo.si_pt_flags Tejun Heo
2011-05-29 23:12 ` [PATCH 14/17] ptrace: make group stop state visible via PTRACE_GETSIGINFO Tejun Heo
2011-05-29 23:12 ` [PATCH 15/17] ptrace: don't let PTRACE_SETSIGINFO override __SI_TRAP siginfo Tejun Heo
2011-05-29 23:12 ` [PATCH 16/17] ptrace: implement TRAP_NOTIFY and use it for group stop events Tejun Heo
2011-05-29 23:12 ` [PATCH 17/17] ptrace: implement PTRACE_LISTEN Tejun Heo
2011-06-02 17:33 ` Oleg Nesterov
2011-06-13 14:10 ` Tejun Heo
2011-06-13 20:33 ` Oleg Nesterov
2011-06-14 6:45 ` Tejun Heo
2011-05-30 15:42 ` [PATCHSET ptrace] ptrace: implement PTRACE_SEIZE/INTERRUPT and group stop notification, take#4 Oleg Nesterov
2011-06-01 5:39 ` Tejun Heo
2011-06-02 12:31 ` Tejun Heo
2011-06-02 14:51 ` Denys Vlasenko
2011-06-03 1:24 ` Tejun Heo
2011-06-03 10:25 ` Pedro Alves
2011-06-16 8:38 ` Tejun Heo
2011-06-16 9:56 ` Pedro Alves
2011-06-17 19:08 ` Oleg Nesterov
2011-06-03 11:57 ` Denys Vlasenko
2011-06-03 12:11 ` Pedro Alves
2011-06-03 14:12 ` Denys Vlasenko
2011-06-03 15:24 ` Pedro Alves
2011-06-03 15:46 ` Oleg Nesterov
2011-06-02 18:27 ` Oleg Nesterov
2011-06-02 21:09 ` Denys Vlasenko
2011-06-03 1:34 ` Tejun Heo
2011-06-03 11:37 ` Denys Vlasenko
2011-06-03 11:58 ` Denys Vlasenko
2011-06-03 15:37 ` Oleg Nesterov
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306710760-16440-13-git-send-email-tj@kernel.org \
--to=tj@kernel.org \
--cc=akpm@linux-foundation.org \
--cc=bdonlan@gmail.com \
--cc=indan@nul.nu \
--cc=jan.kratochvil@redhat.com \
--cc=linux-kernel@vger.kernel.org \
--cc=oleg@redhat.com \
--cc=pedro@codesourcery.com \
--cc=torvalds@linux-foundation.org \
--cc=vda.linux@googlemail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.