I can't ceph file system in writing on file

I can't ceph file system in writing on file

[biyan chen]

When I mount ceph after the file system. I want to go to create a
file, but hint permissions problem, cannot write

In /var/log/ceph log information inside, didn't see more information

[root@ceph_client /]# df
Filesystem           1K-blocks      Used Available Use% Mounted on
/dev/sda1            472658192  20199408 428449108   5% /
tmpfs                  1984548         0   1984548   0% /dev/shm
/dev/loop0             3351190   3351190         0 100% /mnt/cdrom
192.168.0.211:6789:/ 158047232     81920 155843584   1% /1
[root@ceph_client /]# cd /1
[root@ceph_client 1]# echo "1">>1.txt
-bash: 1.txt: Permission denied
[root@ceph_client 1]# cd ..
[root@ceph_client /]# ll
total 112
drwxr-xr-x.  1 root root     0 Jun  1 20:05 1

Re: I can't ceph file system in writing on file

[biyan chen]

2011-06-01 15:20:23.258669 7fee67a8c710 -- 192.168.0.211:6789/0 <==
mds0 192.168.0.207:6800/7272 193 ==== mdsbeacon(4297/alpha up:active
seq 180 v14) v2 ==== 244+0+0 (3951961624 0 0) 0x8e1a00 con 0x8efb40
2011-06-01 15:20:23.258706 7fee67a8c710 mon.0@0(leader) e1 have connection
2011-06-01 15:20:23.258720 7fee67a8c710 mon.0@0(leader) e1 ms_dispatch
existing session MonSession: mds? 192.168.0.207:6800/7272 is openallow
rwx for mds? 192.168.0.207:6800/7272
2011-06-01 15:20:23.258728 7fee67a8c710 mon.0@0(leader) e1  caps allow rwx
2011-06-01 15:20:23.258748 7fee67a8c710
mon.0@0(leader).paxosservice(mdsmap) dispatch mdsbeacon(4297/alpha
up:active seq 180 v14) v2 from mds0 192.168.0.207:6800/7272
2011-06-01 15:20:23.258763 7fee67a8c710 mon.0@0(leader).paxos(mdsmap
active lc 14) is_readable now=2011-06-01 15:20:23.258758
lease_expire=0.000000 has v14 lc 14
2011-06-01 15:20:23.258777 7fee67a8c710 mon.0@0(leader).mds e14
preprocess_query mdsbeacon(4297/alpha up:active seq 180 v14) v2 from
mds0 192.168.0.207:6800/7272
2011-06-01 15:20:23.258792 7fee67a8c710 mon.0@0(leader).mds e14
preprocess_beacon mdsbeacon(4297/alpha up:active seq 180 v14) v2 from
mds0 192.168.0.207:6800/7272 compat={},rocompat={},incompat={1=base
v0.20,2=client writeable ranges,3=default file layouts on dirs,4=dir
inode in separate object}
2011-06-01 15:20:23.258806 7fee67a8c710 mon.0@0(leader).mds e14
_note_beacon mdsbeacon(4297/alpha up:active seq 180 v14) v2 noting
time
2011-06-01 15:20:23.258821 7fee67a8c710 -- 192.168.0.211:6789/0 -->
192.168.0.207:6800/7272 -- mdsbeacon(4297/alpha up:active seq 180 v14)
v1 -- ?+0 0x9b4c80 con 0x8efb40
^C

[root@ceph_mon0 ceph]# tail /var/log/ceph/mon.0.log -f
Display the above information ！

Thanks!

2011/6/1 biyan chen <riby.chen@gmail.com>:
> When I mount ceph after the file system. I want to go to create a
> file, but hint permissions problem, cannot write
>
> In /var/log/ceph log information inside, didn't see more information
>
> [root@ceph_client /]# df
> Filesystem           1K-blocks      Used Available Use% Mounted on
> /dev/sda1            472658192  20199408 428449108   5% /
> tmpfs                  1984548         0   1984548   0% /dev/shm
> /dev/loop0             3351190   3351190         0 100% /mnt/cdrom
> 192.168.0.211:6789:/ 158047232     81920 155843584   1% /1
> [root@ceph_client /]# cd /1
> [root@ceph_client 1]# echo "1">>1.txt
> -bash: 1.txt: Permission denied
> [root@ceph_client 1]# cd ..
> [root@ceph_client /]# ll
> total 112
> drwxr-xr-x.  1 root root     0 Jun  1 20:05 1
>



-- 
name:Riby
mobile:+86 15280267642
company: 百大龙一
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: I can't ceph file system in writing on file

[Jeff Wu]

Hi,

Are the other write commands also printf "Permission denied" ?

Could you try to run:

dd if=/dev/zero of=/1/512M bs=1M count=512 

If you detect a bug ,you can file it at

http://tracker.newdream.net

Jeff ,Wu


On Wed, 2011-06-01 at 15:19 +0800, biyan chen wrote:
> 2011-06-01 15:20:23.258669 7fee67a8c710 -- 192.168.0.211:6789/0 <==
> mds0 192.168.0.207:6800/7272 193 ==== mdsbeacon(4297/alpha up:active
> seq 180 v14) v2 ==== 244+0+0 (3951961624 0 0) 0x8e1a00 con 0x8efb40
> 2011-06-01 15:20:23.258706 7fee67a8c710 mon.0@0(leader) e1 have connection
> 2011-06-01 15:20:23.258720 7fee67a8c710 mon.0@0(leader) e1 ms_dispatch
> existing session MonSession: mds? 192.168.0.207:6800/7272 is openallow
> rwx for mds? 192.168.0.207:6800/7272
> 2011-06-01 15:20:23.258728 7fee67a8c710 mon.0@0(leader) e1  caps allow rwx
> 2011-06-01 15:20:23.258748 7fee67a8c710
> mon.0@0(leader).paxosservice(mdsmap) dispatch mdsbeacon(4297/alpha
> up:active seq 180 v14) v2 from mds0 192.168.0.207:6800/7272
> 2011-06-01 15:20:23.258763 7fee67a8c710 mon.0@0(leader).paxos(mdsmap
> active lc 14) is_readable now=2011-06-01 15:20:23.258758
> lease_expire=0.000000 has v14 lc 14
> 2011-06-01 15:20:23.258777 7fee67a8c710 mon.0@0(leader).mds e14
> preprocess_query mdsbeacon(4297/alpha up:active seq 180 v14) v2 from
> mds0 192.168.0.207:6800/7272
> 2011-06-01 15:20:23.258792 7fee67a8c710 mon.0@0(leader).mds e14
> preprocess_beacon mdsbeacon(4297/alpha up:active seq 180 v14) v2 from
> mds0 192.168.0.207:6800/7272 compat={},rocompat={},incompat={1=base
> v0.20,2=client writeable ranges,3=default file layouts on dirs,4=dir
> inode in separate object}
> 2011-06-01 15:20:23.258806 7fee67a8c710 mon.0@0(leader).mds e14
> _note_beacon mdsbeacon(4297/alpha up:active seq 180 v14) v2 noting
> time
> 2011-06-01 15:20:23.258821 7fee67a8c710 -- 192.168.0.211:6789/0 -->
> 192.168.0.207:6800/7272 -- mdsbeacon(4297/alpha up:active seq 180 v14)
> v1 -- ?+0 0x9b4c80 con 0x8efb40
> ^C
> 
> [root@ceph_mon0 ceph]# tail /var/log/ceph/mon.0.log -f
> Display the above information ！
> 
> Thanks!
> 
> 2011/6/1 biyan chen <riby.chen@gmail.com>:
> > When I mount ceph after the file system. I want to go to create a
> > file, but hint permissions problem, cannot write
> >
> > In /var/log/ceph log information inside, didn't see more information
> >
> > [root@ceph_client /]# df
> > Filesystem           1K-blocks      Used Available Use% Mounted on
> > /dev/sda1            472658192  20199408 428449108   5% /
> > tmpfs                  1984548         0   1984548   0% /dev/shm
> > /dev/loop0             3351190   3351190         0 100% /mnt/cdrom
> > 192.168.0.211:6789:/ 158047232     81920 155843584   1% /1
> > [root@ceph_client /]# cd /1
> > [root@ceph_client 1]# echo "1">>1.txt
> > -bash: 1.txt: Permission denied
> > [root@ceph_client 1]# cd ..
> > [root@ceph_client /]# ll
> > total 112
> > drwxr-xr-x.  1 root root     0 Jun  1 20:05 1
> >
> 
> 
> 

--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: I can't ceph file system in writing on file

[biyan chen]

Hi Jeff Wu

[root@ceph_client 1]# dd if=/dev/zero of=/1/512M bs=1M count=512
dd: opening `/1/512M': Permission denied
[root@ceph_client 1]#

But it can read and write existing documents.



My configuration is :



;
; Sample ceph ceph.conf file.
;
; This file defines cluster membership, the various locations
; that Ceph stores data, and any other runtime options.

; If a 'host' is defined for a daemon, the start/stop script will
; verify that it matches the hostname (or else ignore it).  If it is
; not defined, it is assumed that the daemon is intended to start on
; the current host (e.g., in a setup with a startup.conf on each
; node).

; The variables $type, $id and $name are available to use in paths
; $type = The type of daemon, possible values: mon, mds and osd
; $id = The ID of the daemon, for mon.alpha, $id will be alpha
; $name = $type.$id

; For example:
; osd.0
;  $type = osd
;  $id = 0
;  $name = osd.0

; mon.beta
;  $type = mon
;  $id = beta
;  $name = mon.beta

; global
[global]
	; enable secure authentication
	auth supported = cephx
        keyring = /etc/ceph/keyring.bin
        debug ms = 0;

        ; allow ourselves to open a lot of files
        max open files = 131072

        ; set log file
        log file = /var/log/ceph/$name.log
        ; log_to_syslog = true        ; uncomment this line to log to syslog

        ; set up pid files
        pid file = /var/run/ceph/$name.pid

        ; If you want to run a IPv6 cluster, set this to true.
Dual-stack isn't possible
        ;ms bind ipv6 = true

; monitors
;  You need at least one.  You need at least three if you want to
;  tolerate any node failures.  Always create an odd number.
[mon]
        mon data = /data/mon$id

        ; If you are using for example the RADOS Gateway and want to
have your newly created
        ; pools a higher replication level, you can set a default
        ;osd pool default size = 3

        ; You can also specify a CRUSH rule for new pools
        ; Wiki: http://ceph.newdream.net/wiki/Custom_data_placement_with_CRUSH
        ;osd pool default crush rule = 0

        ; Timing is critical for monitors, but if you want to allow
the clocks to drift a
        ; bit more, you can specify the max drift.
        ;mon clock drift allowed = 1

        ; Tell the monitor to backoff from this warning for 30 seconds
        ;mon clock drift warn backoff = 30

	; logging, for debugging monitor crashes, in order of
	; their likelihood of being helpful :)
	debug ms = 1
	debug mon = 20
	debug paxos = 20
	debug auth = 20

[mon.0]
	host = ceph_mon0
	mon addr = 192.168.0.211:6789

; mds
;  You need at least one.  Define two to get a standby.
[mds]
	; where the mds keeps it's secret encryption keys
	keyring = /etc/ceph/keyring.$name

	; mds logging to debug issues.
	debug ms = 1
	debug mds = 20

[mds.alpha]
	host = ceph_mds0

; osd
;  You need at least one.  Two if you want data to be replicated.
;  Define as many as you like.
[osd]
	; This is where the btrfs volume will be mounted.
	osd data = /data/$name
        keyring = /etc/ceph/keyring.$name
	debug osd = 1
	debug filestore = 1

	; Ideally, make this a separate disk or partition.  A few
 	; hundred MB should be enough; more if you have fast or many
 	; disks.  You can use a file under the osd data dir if need be
 	; (e.g. /data/$name/journal), but it will be slower than a
 	; separate disk or partition.

        ; This is an example of a file-based journal.
	osd journal = /data/$name/journal
	osd journal size = 1000 ; journal size, in megabytes

        ; If you want to run the journal on a tmpfs, disable DirectIO
        ;journal dio = false

        ; You can change the number of recovery operations to speed up recovery
        ; or slow it down if your machines can't handle it
        ; osd recovery max active = 3

	; osd logging to debug osd issues, in order of likelihood of being
	; helpful
	debug ms = 1
	debug osd = 20
	debug filestore = 20
	debug journal = 20

[osd.0]
	host = ceph_osd0

	; if 'btrfs devs' is not specified, you're responsible for
	; setting up the 'osd data' dir.  if it is not btrfs, things
	; will behave up until you try to recover from a crash (which
	; usually fine for basic testing).
	btrfs devs = /dev/sda7

        ; If you want to specify some other mount options, you can do so.
        ; The default values are rw,noatime
        btrfs options = rw,noatime

[osd.1]
	host = ceph_osd1
	btrfs devs = /dev/sda7
	btrfs options = rw,noatime

[client]
      ; userspace client
      debug ms = 1
      debug client = 10


2011/6/1 Jeff Wu <cpwu@tnsoft.com.cn>:
>
> Hi,
>
> Are the other write commands also printf "Permission denied" ?
>
> Could you try to run:
>
> dd if=/dev/zero of=/1/512M bs=1M count=512
>
> If you detect a bug ,you can file it at
>
> http://tracker.newdream.net
>
> Jeff ,Wu
>
>
> On Wed, 2011-06-01 at 15:19 +0800, biyan chen wrote:
>> 2011-06-01 15:20:23.258669 7fee67a8c710 -- 192.168.0.211:6789/0 <==
>> mds0 192.168.0.207:6800/7272 193 ==== mdsbeacon(4297/alpha up:active
>> seq 180 v14) v2 ==== 244+0+0 (3951961624 0 0) 0x8e1a00 con 0x8efb40
>> 2011-06-01 15:20:23.258706 7fee67a8c710 mon.0@0(leader) e1 have connection
>> 2011-06-01 15:20:23.258720 7fee67a8c710 mon.0@0(leader) e1 ms_dispatch
>> existing session MonSession: mds? 192.168.0.207:6800/7272 is openallow
>> rwx for mds? 192.168.0.207:6800/7272
>> 2011-06-01 15:20:23.258728 7fee67a8c710 mon.0@0(leader) e1  caps allow rwx
>> 2011-06-01 15:20:23.258748 7fee67a8c710
>> mon.0@0(leader).paxosservice(mdsmap) dispatch mdsbeacon(4297/alpha
>> up:active seq 180 v14) v2 from mds0 192.168.0.207:6800/7272
>> 2011-06-01 15:20:23.258763 7fee67a8c710 mon.0@0(leader).paxos(mdsmap
>> active lc 14) is_readable now=2011-06-01 15:20:23.258758
>> lease_expire=0.000000 has v14 lc 14
>> 2011-06-01 15:20:23.258777 7fee67a8c710 mon.0@0(leader).mds e14
>> preprocess_query mdsbeacon(4297/alpha up:active seq 180 v14) v2 from
>> mds0 192.168.0.207:6800/7272
>> 2011-06-01 15:20:23.258792 7fee67a8c710 mon.0@0(leader).mds e14
>> preprocess_beacon mdsbeacon(4297/alpha up:active seq 180 v14) v2 from
>> mds0 192.168.0.207:6800/7272 compat={},rocompat={},incompat={1=base
>> v0.20,2=client writeable ranges,3=default file layouts on dirs,4=dir
>> inode in separate object}
>> 2011-06-01 15:20:23.258806 7fee67a8c710 mon.0@0(leader).mds e14
>> _note_beacon mdsbeacon(4297/alpha up:active seq 180 v14) v2 noting
>> time
>> 2011-06-01 15:20:23.258821 7fee67a8c710 -- 192.168.0.211:6789/0 -->
>> 192.168.0.207:6800/7272 -- mdsbeacon(4297/alpha up:active seq 180 v14)
>> v1 -- ?+0 0x9b4c80 con 0x8efb40
>> ^C
>>
>> [root@ceph_mon0 ceph]# tail /var/log/ceph/mon.0.log -f
>> Display the above information ！
>>
>> Thanks!
>>
>> 2011/6/1 biyan chen <riby.chen@gmail.com>:
>> > When I mount ceph after the file system. I want to go to create a
>> > file, but hint permissions problem, cannot write
>> >
>> > In /var/log/ceph log information inside, didn't see more information
>> >
>> > [root@ceph_client /]# df
>> > Filesystem           1K-blocks      Used Available Use% Mounted on
>> > /dev/sda1            472658192  20199408 428449108   5% /
>> > tmpfs                  1984548         0   1984548   0% /dev/shm
>> > /dev/loop0             3351190   3351190         0 100% /mnt/cdrom
>> > 192.168.0.211:6789:/ 158047232     81920 155843584   1% /1
>> > [root@ceph_client /]# cd /1
>> > [root@ceph_client 1]# echo "1">>1.txt
>> > -bash: 1.txt: Permission denied
>> > [root@ceph_client 1]# cd ..
>> > [root@ceph_client /]# ll
>> > total 112
>> > drwxr-xr-x.  1 root root     0 Jun  1 20:05 1
>> >
>>
>>
>>
>
>



-- 
name:Riby
mobile:+86 15280267642
company: 百大龙一
--
To unsubscribe from this list: send the line "unsubscribe ceph-devel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html