* Problems compiling obexd @ 2011-06-12 10:35 Pacho Ramos 2011-06-12 14:39 ` Luiz Augusto von Dentz 0 siblings, 1 reply; 6+ messages in thread From: Pacho Ramos @ 2011-06-12 10:35 UTC (permalink / raw) To: BlueZ development Hello Looks like some people are having problems compiling obexd downstream (also with 0.40 version), http://bugs.gentoo.org/show_bug.cgi?id=368135 I cannot reproduce myself but, googling a bit, looks like some other people have this problem (but I still didn't find a solution). The error is the following: make -j4 -l3 make --no-print-directory all-am CC client/pbap.o CC client/sync.o CC client/transfer.o GEN client/obex-client.service CC gdbus/mainloop.o CC gdbus/watch.o CC gdbus/object.o CC gdbus/polkit.o CC gwobex/gw-obex.o CC gwobex/obex-priv.o CC gwobex/obex-xfer.o CC gwobex/utils.o CC btio/btio.o btio/btio.c: In function 'set_sec_level': btio/btio.c:369: error: storage size of 'sec' isn't known btio/btio.c:372: error: 'BT_SECURITY_LOW' undeclared (first use in this function) btio/btio.c:372: error: (Each undeclared identifier is reported only once btio/btio.c:372: error: for each function it appears in.) btio/btio.c:372: error: 'BT_SECURITY_HIGH' undeclared (first use in this function) btio/btio.c:382: error: 'SOL_BLUETOOTH' undeclared (first use in this function) btio/btio.c:382: error: 'BT_SECURITY' undeclared (first use in this function) btio/btio.c: In function 'l2cap_get_lm': btio/btio.c:416: error: 'BT_SECURITY_LOW' undeclared (first use in this function) btio/btio.c:418: error: 'BT_SECURITY_MEDIUM' undeclared (first use in this function) btio/btio.c:420: error: 'BT_SECURITY_HIGH' undeclared (first use in this function) btio/btio.c: In function 'rfcomm_get_lm': btio/btio.c:437: error: 'BT_SECURITY_LOW' undeclared (first use in this function) btio/btio.c:439: error: 'BT_SECURITY_MEDIUM' undeclared (first use in this function) btio/btio.c:441: error: 'BT_SECURITY_HIGH' undeclared (first use in this function) btio/btio.c: In function 'get_sec_level': btio/btio.c:449: error: storage size of 'sec' isn't known btio/btio.c:455: error: 'SOL_BLUETOOTH' undeclared (first use in this function) btio/btio.c:455: error: 'BT_SECURITY' undeclared (first use in this function) btio/btio.c: In function 'parse_set_opts': btio/btio.c:635: error: 'L2CAP_MODE_BASIC' undeclared (first use in this function) btio/btio.c: In function 'l2cap_get': btio/btio.c:778: error: 'SOL_BLUETOOTH' undeclared (first use in this function) btio/btio.c:778: error: 'BT_DEFER_SETUP' undeclared (first use in this function) btio/btio.c: In function 'rfcomm_get': btio/btio.c:885: error: 'SOL_BLUETOOTH' undeclared (first use in this function) btio/btio.c:885: error: 'BT_DEFER_SETUP' undeclared (first use in this function) btio/btio.c: In function 'bt_io_listen': btio/btio.c:1282: error: 'SOL_BLUETOOTH' undeclared (first use in this function) btio/btio.c:1282: error: 'BT_DEFER_SETUP' undeclared (first use in this function) distcc[23546] ERROR: compile btio/btio.c on localhost failed make[1]: *** [btio/btio.o] Error 1 make: *** [all] Error 2 make: INTERNAL: Exiting with 5 jobserver tokens available; should be 4! Do you have any idea about where could the problem be? Thanks a lot ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problems compiling obexd 2011-06-12 10:35 Problems compiling obexd Pacho Ramos @ 2011-06-12 14:39 ` Luiz Augusto von Dentz 2011-06-12 15:31 ` Re: bluetooth headset on linux YuGiOhJCJ Mailing-List 2011-06-13 15:06 ` Problems compiling obexd Pacho Ramos 0 siblings, 2 replies; 6+ messages in thread From: Luiz Augusto von Dentz @ 2011-06-12 14:39 UTC (permalink / raw) To: Pacho Ramos; +Cc: BlueZ development Hi, On Sun, Jun 12, 2011 at 1:35 PM, Pacho Ramos <pachoramos@gmail.com> wrote: > Hello > > Looks like some people are having problems compiling obexd downstream > (also with 0.40 version), > http://bugs.gentoo.org/show_bug.cgi?id=368135 > > I cannot reproduce myself but, googling a bit, looks like some other > people have this problem (but I still didn't find a solution). > > The error is the following: > > make -j4 -l3 > make --no-print-directory all-am > CC client/pbap.o > CC client/sync.o > CC client/transfer.o > GEN client/obex-client.service > CC gdbus/mainloop.o > CC gdbus/watch.o > CC gdbus/object.o > CC gdbus/polkit.o > CC gwobex/gw-obex.o > CC gwobex/obex-priv.o > CC gwobex/obex-xfer.o > CC gwobex/utils.o > CC btio/btio.o > btio/btio.c: In function 'set_sec_level': > btio/btio.c:369: error: storage size of 'sec' isn't known > btio/btio.c:372: error: 'BT_SECURITY_LOW' undeclared (first use in this > function) > btio/btio.c:372: error: (Each undeclared identifier is reported only > once > btio/btio.c:372: error: for each function it appears in.) > btio/btio.c:372: error: 'BT_SECURITY_HIGH' undeclared (first use in this > function) > btio/btio.c:382: error: 'SOL_BLUETOOTH' undeclared (first use in this > function) > btio/btio.c:382: error: 'BT_SECURITY' undeclared (first use in this > function) > btio/btio.c: In function 'l2cap_get_lm': > btio/btio.c:416: error: 'BT_SECURITY_LOW' undeclared (first use in this > function) > btio/btio.c:418: error: 'BT_SECURITY_MEDIUM' undeclared (first use in > this function) > btio/btio.c:420: error: 'BT_SECURITY_HIGH' undeclared (first use in this > function) > btio/btio.c: In function 'rfcomm_get_lm': > btio/btio.c:437: error: 'BT_SECURITY_LOW' undeclared (first use in this > function) > btio/btio.c:439: error: 'BT_SECURITY_MEDIUM' undeclared (first use in > this function) > btio/btio.c:441: error: 'BT_SECURITY_HIGH' undeclared (first use in this > function) > btio/btio.c: In function 'get_sec_level': > btio/btio.c:449: error: storage size of 'sec' isn't known > btio/btio.c:455: error: 'SOL_BLUETOOTH' undeclared (first use in this > function) > btio/btio.c:455: error: 'BT_SECURITY' undeclared (first use in this > function) > btio/btio.c: In function 'parse_set_opts': > btio/btio.c:635: error: 'L2CAP_MODE_BASIC' undeclared (first use in this > function) > btio/btio.c: In function 'l2cap_get': > btio/btio.c:778: error: 'SOL_BLUETOOTH' undeclared (first use in this > function) > btio/btio.c:778: error: 'BT_DEFER_SETUP' undeclared (first use in this > function) > btio/btio.c: In function 'rfcomm_get': > btio/btio.c:885: error: 'SOL_BLUETOOTH' undeclared (first use in this > function) > btio/btio.c:885: error: 'BT_DEFER_SETUP' undeclared (first use in this > function) > btio/btio.c: In function 'bt_io_listen': > btio/btio.c:1282: error: 'SOL_BLUETOOTH' undeclared (first use in this > function) > btio/btio.c:1282: error: 'BT_DEFER_SETUP' undeclared (first use in this > function) > distcc[23546] ERROR: compile btio/btio.c on localhost failed > make[1]: *** [btio/btio.o] Error 1 > make: *** [all] Error 2 > make: INTERNAL: Exiting with 5 jobserver tokens available; should be 4! > > Do you have any idea about where could the problem be? It could be a very old libbluetooth which does not those symbols, what version are you using? Btw we do check for libbluetooth but don't depend have any version so we might have to fix that so in case like this configure should fail. -- Luiz Augusto von Dentz Computer Engineer ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Re: bluetooth headset on linux 2011-06-12 14:39 ` Luiz Augusto von Dentz @ 2011-06-12 15:31 ` YuGiOhJCJ Mailing-List 2011-06-13 6:57 ` Takeshi Hamasaki 2011-06-13 15:06 ` Problems compiling obexd Pacho Ramos 1 sibling, 1 reply; 6+ messages in thread From: YuGiOhJCJ Mailing-List @ 2011-06-12 15:31 UTC (permalink / raw) To: takeshi.ken.hamasaki; +Cc: BlueZ development Ok, so you think this is probably because I use the last version of bluez that I get this compile error. But as you can see I have the two versions installed, so it should works correctly. The old bluez version installed on my distro was 3.36 $ apt-cache show libbluetooth-dev | grep Version Version: 3.36-1 The new bluez version installed on my distro is 4.94. The 2 libraries version are 2.11.2 and 3.11.2 : $ ls -l /usr/lib/libbluetooth.* -rwxr-xr-x 1 root root 938 2011-06-12 01:39 /usr/lib/libbluetooth.la lrwxrwxrwx 1 root root 22 2011-06-12 17:02 /usr/lib/libbluetooth.so -> libbluetooth.so.3.11.2 lrwxrwxrwx 1 root root 22 2010-12-18 15:25 /usr/lib/libbluetooth.so.2 -> libbluetooth.so.2.11.2 -rw-r--r-- 1 root root 78900 2008-07-12 11:20 /usr/lib/libbluetooth.so.2.11.2 lrwxrwxrwx 1 root root 22 2011-06-12 17:02 /usr/lib/libbluetooth.so.3 -> libbluetooth.so.3.11.2 -rwxr-xr-x 1 root root 104024 2011-06-12 01:39 /usr/lib/libbluetooth.so.3.11.2 If I compile like this plugz, I get the error. If I change the /usr/lib/libbluetooth.so to target the old libbluetooth.so.2.11.2, I get the same error. Some people use this headset on Linux[8][9]. So, I think the headset should be supported using bluez... I read documentation[1][2][3][4][5][6][7][8][9] but I can't bind my headset and my computer using bluetooth... Can you help me? [1]http://bluetooth-alsa.sourceforge.net/build.html [2]http://www.linux.ie/articles/bluetoothheadset.php [3]http://forums.overclockers.com.au/showthread.php?t=694010 [4]https://help.ubuntu.com/community/BluetoothAudio [5]http://gablog.eu/online/node/80 [6]http://forums.debian.net/viewtopic.php?t=12497 [7]http://penguincopter.blogspot.com/2009/07/linux-bluetooth-komorka-internet.html [8]http://forums.opensuse.org/english/get-technical-help-here/multimedia/446585-bluetooth-audio-alsa-phonon-kde.html [9]http://blog.bulix.org/index.php/blog/1008 ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Re: bluetooth headset on linux 2011-06-12 15:31 ` Re: bluetooth headset on linux YuGiOhJCJ Mailing-List @ 2011-06-13 6:57 ` Takeshi Hamasaki 2011-06-13 12:24 ` YuGiOhJCJ Mailing-List 0 siblings, 1 reply; 6+ messages in thread From: Takeshi Hamasaki @ 2011-06-13 6:57 UTC (permalink / raw) To: YuGiOhJCJ Mailing-List; +Cc: BlueZ development Hi, 2011/6/13 YuGiOhJCJ Mailing-List <yugiohjcj-mailinglist@laposte.net>: > Ok, so you think this is probably because I use the last version of bluez that I get this compile error. No. Not only libbluetooth-dev but build tools were also old at that libbluetooth.so.2* time. For successful build of plugz, find line: ECHO="echo" in libtool and add next line under or above that: echo="echo" I found this solution during googling with keywords "$echo libtool" . I saw that make command finished with success status but did not installed them. If you find some progress beyond that, please let us know. Cheers! Oh, I should add this: I don't have libbluetooth.so.2* installed. I also use bluez 4.94, and my distro is Debian squeeze/wheezy. -- Takeshi Hamasaki ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: bluetooth headset on linux 2011-06-13 6:57 ` Takeshi Hamasaki @ 2011-06-13 12:24 ` YuGiOhJCJ Mailing-List 0 siblings, 0 replies; 6+ messages in thread From: YuGiOhJCJ Mailing-List @ 2011-06-13 12:24 UTC (permalink / raw) To: Takeshi Hamasaki; +Cc: BlueZ development Indeed it solves my compile problem, thank you :-) --- # An echo program that protects backslashes. ECHO="printf %s\\n" echo="echo" --- I add the line : echo="echo" after the line : ECHO="printf %s\\n" in the file : libtool So now I have installed bluetooth-alsa and I think it can help me to make my bluetooth headset works. I do this : $ sudo a2dpd A2DPD[14:19:26.370]: init_ipc: Selected IPC: unix, addr=127.0.0.1, bcst=127.0.0.255, port=21453 A2DPD[14:19:26.370]: main: a2dpd [Jun 13 2011 13:46:06] starting ... A2DPD[14:19:26.371]: main: (errno=9:Bad file descriptor)a2dpd addr=00:1E:7C:01:0A:5E timer=0 us [Jun 13 2011 13:46:06] A2DPD[14:19:26.371]: a2dpd_signal_init: Getting on DBUS A2DPD[14:19:26.373]: a2dpd_signal_init: Installing watch A2DPD[14:19:26.373]: add_dbus_watch: Added watch 0 0x8d67858 disabled A2DPD[14:19:26.373]: add_dbus_watch: Added watch 1 0x8d67880 enabled A2DPD[14:19:26.373]: a2dpd_signal_init: Registering object path: /com/access/a2dpd A2DPD[14:19:26.374]: a2dpd_signal_init: Acquiring service: com.access.a2dpd A2DPD[14:19:26.375]: a2dpd_signal_init: OK A2DPD[14:19:26.375]: a2dpd_signal_init: OK A2DPD[14:19:26.375]: a2dpd_register_sdp: Start A2DPD[14:19:26.375]: add_avrtg: A2DPD[14:19:26.375]: add_a2source: A2DPD[14:19:26.376]: a2dpd_register_sdp: OK A2DPD[14:19:26.376]: main_loop: A2DPD[14:19:26.376]: make_server_socket: A2DPD[14:19:26.376]: a2dpd_signal_state: Started 00:1E:7C:01:0A:5E A2DPD[14:19:26.376]: bta2dpdevicenew: A2DPD[14:19:26.377]: a2dpd_signal_address_changed: 00:1E:7C:01:0A:5E A2DPD[14:19:26.377]: a2dpd_signal_set_socket: Signal socket set to 7 A2DPD[14:19:26.379]: a2dpd_signal_state: Disconnected A2DPD[14:19:26.379]: a2dp_alloc: A2DPD[14:19:26.379]: a2dp_alloc: (a2dp = 0x8d6b2e0) A2DPD[14:19:26.379]: a2dp_new: 00:1E:7C:01:0A:5E, 44100 A2DPD[14:19:26.379]: a2dp_new: State AVDTP_STATE_DISCONNECTED A2DPD[14:19:26.380]: alsa_new: A2DPD[14:19:26.380]: alsa_new: device=plughw:0,0, framerate=44100 A2DPD[14:19:26.380]: alsa_new: State ALSA_STATE_DISCONNECTED A2DPD[14:19:26.380]: alsa_new: returning 0x8d6d478 A2DPD[14:19:26.380]: sco_new: A2DPD[14:19:26.380]: sco_new: State SCO_STATE_DISCONNECTED A2DPD[14:19:26.380]: sco_state_disconnect: Filtering state : already disconnected A2DPD[14:19:26.380]: main_loop: Bluetooth Device Settings [44100 hz, 2 channels, 16 bits] A2DPD[14:19:26.381]: avrcp_new: Listening for AVRCP on socket 9 A2DPD[14:19:26.382]: avrcp_new: 0x8d6d588 Then I run the vlc player and I hear nothing in my headset (I think the binding isn't done with my computer and my headset). My vlcrc file : $ cat ~/.vlc/vlcrc | grep alsa [alsa] # ALSA audio output #alsadev=default alsadev=a2dpd My ~/.asoundrc file : $ cat ~/.asoundrc pcm.a2dpd { type a2dpd } My ~/.a2dprc file : $ cat ~/.a2dprc | grep address # This is now deprecated and should not be used, moreover, if the address is changed using dbus # Your bluetooth headset address #address=00:08:F4:30:07:64 address=00:1E:7C:01:0A:5E I don't understand why my headset doesn't work... What can I do? On Mon, 13 Jun 2011 15:57:41 +0900 Takeshi Hamasaki <takeshi.ken.hamasaki@gmail.com> wrote: > > Hi, > > 2011/6/13 YuGiOhJCJ Mailing-List <yugiohjcj-mailinglist@laposte.net>: > > Ok, so you think this is probably because I use the last version of bluez that I get this compile error. > > No. Not only libbluetooth-dev but build tools were also old > at that libbluetooth.so.2* time. > For successful build of plugz, find line: > > ECHO="echo" > > in libtool and add next line under or above that: > > echo="echo" > > I found this solution during googling with keywords "$echo libtool" . > I saw that make command finished with success status but did not installed them. > If you find some progress beyond that, please let us know. > > Cheers! > > Oh, I should add this: > I don't have libbluetooth.so.2* installed. > I also use bluez 4.94, and my distro is Debian squeeze/wheezy. > -- > Takeshi Hamasaki > ^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Problems compiling obexd 2011-06-12 14:39 ` Luiz Augusto von Dentz 2011-06-12 15:31 ` Re: bluetooth headset on linux YuGiOhJCJ Mailing-List @ 2011-06-13 15:06 ` Pacho Ramos 1 sibling, 0 replies; 6+ messages in thread From: Pacho Ramos @ 2011-06-13 15:06 UTC (permalink / raw) To: Luiz Augusto von Dentz; +Cc: BlueZ development El dom, 12-06-2011 a las 17:39 +0300, Luiz Augusto von Dentz escribió: > Hi, > > On Sun, Jun 12, 2011 at 1:35 PM, Pacho Ramos <pachoramos@gmail.com> wrote: > > Hello > > > > Looks like some people are having problems compiling obexd downstream > > (also with 0.40 version), > > http://bugs.gentoo.org/show_bug.cgi?id=368135 > > > > I cannot reproduce myself but, googling a bit, looks like some other > > people have this problem (but I still didn't find a solution). > > > > The error is the following: > > > > make -j4 -l3 > > make --no-print-directory all-am > > CC client/pbap.o > > CC client/sync.o > > CC client/transfer.o > > GEN client/obex-client.service > > CC gdbus/mainloop.o > > CC gdbus/watch.o > > CC gdbus/object.o > > CC gdbus/polkit.o > > CC gwobex/gw-obex.o > > CC gwobex/obex-priv.o > > CC gwobex/obex-xfer.o > > CC gwobex/utils.o > > CC btio/btio.o > > btio/btio.c: In function 'set_sec_level': > > btio/btio.c:369: error: storage size of 'sec' isn't known > > btio/btio.c:372: error: 'BT_SECURITY_LOW' undeclared (first use in this > > function) > > btio/btio.c:372: error: (Each undeclared identifier is reported only > > once > > btio/btio.c:372: error: for each function it appears in.) > > btio/btio.c:372: error: 'BT_SECURITY_HIGH' undeclared (first use in this > > function) > > btio/btio.c:382: error: 'SOL_BLUETOOTH' undeclared (first use in this > > function) > > btio/btio.c:382: error: 'BT_SECURITY' undeclared (first use in this > > function) > > btio/btio.c: In function 'l2cap_get_lm': > > btio/btio.c:416: error: 'BT_SECURITY_LOW' undeclared (first use in this > > function) > > btio/btio.c:418: error: 'BT_SECURITY_MEDIUM' undeclared (first use in > > this function) > > btio/btio.c:420: error: 'BT_SECURITY_HIGH' undeclared (first use in this > > function) > > btio/btio.c: In function 'rfcomm_get_lm': > > btio/btio.c:437: error: 'BT_SECURITY_LOW' undeclared (first use in this > > function) > > btio/btio.c:439: error: 'BT_SECURITY_MEDIUM' undeclared (first use in > > this function) > > btio/btio.c:441: error: 'BT_SECURITY_HIGH' undeclared (first use in this > > function) > > btio/btio.c: In function 'get_sec_level': > > btio/btio.c:449: error: storage size of 'sec' isn't known > > btio/btio.c:455: error: 'SOL_BLUETOOTH' undeclared (first use in this > > function) > > btio/btio.c:455: error: 'BT_SECURITY' undeclared (first use in this > > function) > > btio/btio.c: In function 'parse_set_opts': > > btio/btio.c:635: error: 'L2CAP_MODE_BASIC' undeclared (first use in this > > function) > > btio/btio.c: In function 'l2cap_get': > > btio/btio.c:778: error: 'SOL_BLUETOOTH' undeclared (first use in this > > function) > > btio/btio.c:778: error: 'BT_DEFER_SETUP' undeclared (first use in this > > function) > > btio/btio.c: In function 'rfcomm_get': > > btio/btio.c:885: error: 'SOL_BLUETOOTH' undeclared (first use in this > > function) > > btio/btio.c:885: error: 'BT_DEFER_SETUP' undeclared (first use in this > > function) > > btio/btio.c: In function 'bt_io_listen': > > btio/btio.c:1282: error: 'SOL_BLUETOOTH' undeclared (first use in this > > function) > > btio/btio.c:1282: error: 'BT_DEFER_SETUP' undeclared (first use in this > > function) > > distcc[23546] ERROR: compile btio/btio.c on localhost failed > > make[1]: *** [btio/btio.o] Error 1 > > make: *** [all] Error 2 > > make: INTERNAL: Exiting with 5 jobserver tokens available; should be 4! > > > > Do you have any idea about where could the problem be? > > It could be a very old libbluetooth which does not those symbols, what > version are you using? Btw we do check for libbluetooth but don't > depend have any version so we might have to fix that so in case like > this configure should fail. > > Thanks a lot, this was caused by an old bluez version installed under /usr/local by users suffering this problem. Best regards :-) ^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2011-06-13 15:06 UTC | newest] Thread overview: 6+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2011-06-12 10:35 Problems compiling obexd Pacho Ramos 2011-06-12 14:39 ` Luiz Augusto von Dentz 2011-06-12 15:31 ` Re: bluetooth headset on linux YuGiOhJCJ Mailing-List 2011-06-13 6:57 ` Takeshi Hamasaki 2011-06-13 12:24 ` YuGiOhJCJ Mailing-List 2011-06-13 15:06 ` Problems compiling obexd Pacho Ramos
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.