All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Rafał Miłecki" <zajec5@gmail.com>
To: linux-wireless@vger.kernel.org, Hauke Mehrtens <hauke@hauke-m.de>,
	"John W. Linville" <linville@tuxdriver.com>
Cc: b43-dev@lists.infradead.org, "Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH 3.0] ssb: fix init regression of hostmode PCI core
Date: Tue,  5 Jul 2011 17:25:32 +0200	[thread overview]
Message-ID: <1309879532-8704-1-git-send-email-zajec5@gmail.com> (raw)

Our workarounds seem to be clientmode PCI specific. Using SPROM
workaround on SoC resulted in Oops:

Data bus error, epc == 8017ed58, ra == 80225838
 Oops[#1]:
 Cpu 0
 $ 0   : 00000000 10008000 b8000000 00000001
 $ 4   : 80293b5c 00000caa ffffffff 00000000
 $ 8   : 0000000a 00000003 00000001 696d6d20
 $12   : ffffffff 00000000 00000000 ffffffff
 $16   : 802d0140 b8004800 802c0000 00000000
 $20   : 00000000 802c0000 00000000 802d04d4
 $24   : 00000018 80151a00
 $28   : 81816000 81817df8 8029bda0 80225838
 Hi    : 00000000
 Lo    : 00000000
 epc   : 8017ed58 ssb_ssb_read16+0x48/0x60
   Not tainted
 ra    : 80225838 ssb_pcicore_init+0x54/0x3b4

Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
Hauke: could you give it a try?

John: this regression was introduced in 3.0
---
 drivers/ssb/driver_pcicore.c |   18 +++++++++---------
 1 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 21b9465..11d85bf 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -516,8 +516,17 @@ static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc)
 
 static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
 {
+	ssb_pcicore_fix_sprom_core_index(pc);
+
 	/* Disable PCI interrupts. */
 	ssb_write32(pc->dev, SSB_INTVEC, 0);
+
+	/* Additional PCIe always once-executed workarounds */
+	if (pc->dev->id.coreid == SSB_DEV_PCIE) {
+		ssb_pcicore_serdes_workaround(pc);
+		/* TODO: ASPM */
+		/* TODO: Clock Request Update */
+	}
 }
 
 void __devinit ssb_pcicore_init(struct ssb_pcicore *pc)
@@ -529,8 +538,6 @@ void __devinit ssb_pcicore_init(struct ssb_pcicore *pc)
 	if (!ssb_device_is_enabled(dev))
 		ssb_device_enable(dev, 0);
 
-	ssb_pcicore_fix_sprom_core_index(pc);
-
 #ifdef CONFIG_SSB_PCICORE_HOSTMODE
 	pc->hostmode = pcicore_is_in_hostmode(pc);
 	if (pc->hostmode)
@@ -538,13 +545,6 @@ void __devinit ssb_pcicore_init(struct ssb_pcicore *pc)
 #endif /* CONFIG_SSB_PCICORE_HOSTMODE */
 	if (!pc->hostmode)
 		ssb_pcicore_init_clientmode(pc);
-
-	/* Additional PCIe always once-executed workarounds */
-	if (dev->id.coreid == SSB_DEV_PCIE) {
-		ssb_pcicore_serdes_workaround(pc);
-		/* TODO: ASPM */
-		/* TODO: Clock Request Update */
-	}
 }
 
 static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address)
-- 
1.7.3.4

WARNING: multiple messages have this Message-ID (diff)
From: "Rafał Miłecki" <zajec5@gmail.com>
To: linux-wireless@vger.kernel.org, Hauke Mehrtens <hauke@hauke-m.de>,
	"John W. Linville" <linville@tuxdriver.com>
Cc: b43-dev@lists.infradead.org, "Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH 3.0] ssb: fix init regression of hostmode PCI core
Date: Tue,  5 Jul 2011 17:25:32 +0200	[thread overview]
Message-ID: <1309879532-8704-1-git-send-email-zajec5@gmail.com> (raw)

Our workarounds seem to be clientmode PCI specific. Using SPROM
workaround on SoC resulted in Oops:

Data bus error, epc == 8017ed58, ra == 80225838
 Oops[#1]:
 Cpu 0
 $ 0   : 00000000 10008000 b8000000 00000001
 $ 4   : 80293b5c 00000caa ffffffff 00000000
 $ 8   : 0000000a 00000003 00000001 696d6d20
 $12   : ffffffff 00000000 00000000 ffffffff
 $16   : 802d0140 b8004800 802c0000 00000000
 $20   : 00000000 802c0000 00000000 802d04d4
 $24   : 00000018 80151a00
 $28   : 81816000 81817df8 8029bda0 80225838
 Hi    : 00000000
 Lo    : 00000000
 epc   : 8017ed58 ssb_ssb_read16+0x48/0x60
   Not tainted
 ra    : 80225838 ssb_pcicore_init+0x54/0x3b4

Reported-by: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
Hauke: could you give it a try?

John: this regression was introduced in 3.0
---
 drivers/ssb/driver_pcicore.c |   18 +++++++++---------
 1 files changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/ssb/driver_pcicore.c b/drivers/ssb/driver_pcicore.c
index 21b9465..11d85bf 100644
--- a/drivers/ssb/driver_pcicore.c
+++ b/drivers/ssb/driver_pcicore.c
@@ -516,8 +516,17 @@ static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc)
 
 static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc)
 {
+	ssb_pcicore_fix_sprom_core_index(pc);
+
 	/* Disable PCI interrupts. */
 	ssb_write32(pc->dev, SSB_INTVEC, 0);
+
+	/* Additional PCIe always once-executed workarounds */
+	if (pc->dev->id.coreid == SSB_DEV_PCIE) {
+		ssb_pcicore_serdes_workaround(pc);
+		/* TODO: ASPM */
+		/* TODO: Clock Request Update */
+	}
 }
 
 void __devinit ssb_pcicore_init(struct ssb_pcicore *pc)
@@ -529,8 +538,6 @@ void __devinit ssb_pcicore_init(struct ssb_pcicore *pc)
 	if (!ssb_device_is_enabled(dev))
 		ssb_device_enable(dev, 0);
 
-	ssb_pcicore_fix_sprom_core_index(pc);
-
 #ifdef CONFIG_SSB_PCICORE_HOSTMODE
 	pc->hostmode = pcicore_is_in_hostmode(pc);
 	if (pc->hostmode)
@@ -538,13 +545,6 @@ void __devinit ssb_pcicore_init(struct ssb_pcicore *pc)
 #endif /* CONFIG_SSB_PCICORE_HOSTMODE */
 	if (!pc->hostmode)
 		ssb_pcicore_init_clientmode(pc);
-
-	/* Additional PCIe always once-executed workarounds */
-	if (dev->id.coreid == SSB_DEV_PCIE) {
-		ssb_pcicore_serdes_workaround(pc);
-		/* TODO: ASPM */
-		/* TODO: Clock Request Update */
-	}
 }
 
 static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address)
-- 
1.7.3.4


             reply	other threads:[~2011-07-05 15:25 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-07-05 15:25 Rafał Miłecki [this message]
2011-07-05 15:25 ` [PATCH 3.0] ssb: fix init regression of hostmode PCI core Rafał Miłecki
2011-07-06 18:37 ` John W. Linville
2011-07-06 18:37   ` John W. Linville
2011-07-06 18:53 ` Hauke Mehrtens
2011-07-06 18:53   ` Hauke Mehrtens

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1309879532-8704-1-git-send-email-zajec5@gmail.com \
    --to=zajec5@gmail.com \
    --cc=b43-dev@lists.infradead.org \
    --cc=hauke@hauke-m.de \
    --cc=linux-wireless@vger.kernel.org \
    --cc=linville@tuxdriver.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.