From: Reinhard Meyer <u-boot@emk-elektronik.de>
To: u-boot@lists.denx.de
Subject: [U-Boot] [STATUS] AT91: boards still broken on 02.Aug.2011
Date: Tue, 02 Aug 2011 12:37:41 +0000 [thread overview]
Message-ID: <1312288661.31913.66.camel@ubuntu> (raw)
./MAKEALL at91
--------------------- SUMMARY ----------------------------
Boards compiled: 48
Boards with warnings or errors: 11 ( at91cap9adk meesc meesc_dataflash
pm9261 pm9263 at91sam9263ek at91sam9m10g45ek pm9g45 SBC35_A9G20
TNY_A9260 TNY_A9G20 )
----------------------------------------------------------
Verbose output of broken boards:
Configuring for at91cap9adk board...
at91cap9_devices.c:33:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
clock.c:21:3: error: #error You need to define CONFIG_AT91FAMILY in your
board config!
timer.c:34:3: error: #error You need to define CONFIG_AT91FAMILY in your
board config!
make[1]: *** Keine Regel vorhanden, um das Target ?.depend?,
ben?tigt von ?all?, zu erstellen. Schluss.
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for meesc - Board: meesc, Options:
AT91SAM9263,SYS_USE_NANDFLASH
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from at91sam9263_devices.c:31:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from led.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for meesc_dataflash - Board: meesc, Options:
AT91SAM9263,SYS_USE_DATAFLASH
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from at91sam9263_devices.c:31:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from led.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for pm9261 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:33:0,
from lowlevel_init.S:30:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9261.h:27:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9261.h:43:0:
note: this is the location of the previous definition
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9261_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:33:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9261_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9261.h:27:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9261.h:43:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9261_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for pm9263 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from lowlevel_init.S:30:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
note: this is the location of the previous definition
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from at91sam9263_devices.c:31:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
note: this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from led.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
note: this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for at91sam9263ek board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from at91sam9263_devices.c:31:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9263ek.h:34:0: note: this is the location of the previous definition
In file included from led.c:28:0:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from led.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9263ek.h:34:0: note: this is the location of the previous definition
make[1]: *** [led.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for at91sam9m10g45ek board...
at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9m10g45_devices.c:28:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:39:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9m10g45_devices.c:28:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9g45.h:21:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9m10g45ek.h:36:0: note: this is the location of the previous definition
at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
make[1]: *** [at91sam9m10g45_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for pm9g45 board...
at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9m10g45_devices.c:28:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:39:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9m10g45_devices.c:28:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9g45.h:21:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/pm9g45.h:35:0:
note: this is the location of the previous definition
at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
Verzeichnis nicht gefunden
compilation terminated.
make[1]: *** [at91sam9m10g45_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for SBC35_A9G20 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/sbc35_a9g20.h:47:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9260_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for TNY_A9260 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/tny_a9260.h:57:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9260_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Configuring for TNY_A9G20 board...
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
In file included
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,
from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
from at91sam9260_devices.c:29:
/home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined
/home/reinhard/embedded/u-boot-atmel/include/configs/tny_a9260.h:57:0:
note: this is the location of the previous definition
make[1]: *** [at91sam9260_devices.o] Fehler 1
make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
arm-linux-gnueabi-size: './u-boot': No such file
Best Regards,
Reinhard
next reply other threads:[~2011-08-02 12:37 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-02 12:37 Reinhard Meyer [this message]
2011-08-02 13:23 ` [U-Boot] [STATUS] AT91: boards still broken on 02.Aug.2011 Thomas Petazzoni
2011-08-02 13:36 ` Reinhard Meyer
2011-08-03 2:08 ` Hong Xu
2011-08-03 7:37 ` Thomas Petazzoni
2011-08-03 7:43 ` Reinhard Meyer
2011-08-04 7:52 ` Matthias Fuchs
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1312288661.31913.66.camel@ubuntu \
--to=u-boot@emk-elektronik.de \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.