From: Matthias Fuchs <matthias.fuchs@esd.eu>
To: u-boot@lists.denx.de
Subject: [U-Boot] [STATUS] AT91: boards still broken on 02.Aug.2011
Date: Thu, 04 Aug 2011 09:52:55 +0200 [thread overview]
Message-ID: <4E3A4FD7.4070402@esd.eu> (raw)
In-Reply-To: <1312288661.31913.66.camel@ubuntu>
Hi Reinhard,
the patch for meesc has been posted two times now.
Please notice
http://lists.denx.de/pipermail/u-boot/2011-July/096680.html
and this resend of the mentioned patch:
http://lists.denx.de/pipermail/u-boot/2011-July/096679.html
I hope this gets meesc back on the green site.
Matthias
On 02.08.2011 14:37, Reinhard Meyer wrote:
> ./MAKEALL at91
>
> --------------------- SUMMARY ----------------------------
> Boards compiled: 48
> Boards with warnings or errors: 11 ( at91cap9adk meesc meesc_dataflash
> pm9261 pm9263 at91sam9263ek at91sam9m10g45ek pm9g45 SBC35_A9G20
> TNY_A9260 TNY_A9G20 )
> ----------------------------------------------------------
>
> Verbose output of broken boards:
>
> Configuring for at91cap9adk board...
> at91cap9_devices.c:33:25: fatal error: asm/arch/io.h: Datei oder
> Verzeichnis nicht gefunden
> compilation terminated.
> clock.c:21:3: error: #error You need to define CONFIG_AT91FAMILY in your
> board config!
> timer.c:34:3: error: #error You need to define CONFIG_AT91FAMILY in your
> board config!
> make[1]: *** Keine Regel vorhanden, um das Target ?.depend?,
> ben?tigt von ?all?, zu erstellen. Schluss.
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for meesc - Board: meesc, Options:
> AT91SAM9263,SYS_USE_NANDFLASH
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
> from at91sam9263_devices.c:31:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
> this is the location of the previous definition
> In file included from led.c:28:0:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from led.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
> this is the location of the previous definition
> make[1]: *** [led.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for meesc_dataflash - Board: meesc, Options:
> AT91SAM9263,SYS_USE_DATAFLASH
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
> from at91sam9263_devices.c:31:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
> this is the location of the previous definition
> In file included from led.c:28:0:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from led.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/meesc.h:36:0: note:
> this is the location of the previous definition
> make[1]: *** [led.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for pm9261 board...
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:33:0,
> from lowlevel_init.S:30:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9261.h:27:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/pm9261.h:43:0:
> note: this is the location of the previous definition
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
> from at91sam9261_devices.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:33:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from at91sam9261_devices.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9261.h:27:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/pm9261.h:43:0:
> note: this is the location of the previous definition
> make[1]: *** [at91sam9261_devices.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for pm9263 board...
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
> from lowlevel_init.S:30:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
> note: this is the location of the previous definition
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
> from at91sam9263_devices.c:31:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
> note: this is the location of the previous definition
> In file included from led.c:28:0:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from led.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/pm9263.h:42:0:
> note: this is the location of the previous definition
> make[1]: *** [led.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for at91sam9263ek board...
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
> from at91sam9263_devices.c:31:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9263ek.h:34:0: note: this is the location of the previous definition
> In file included from led.c:28:0:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:35:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from led.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9263.h:23:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9263ek.h:34:0: note: this is the location of the previous definition
> make[1]: *** [led.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for at91sam9m10g45ek board...
> at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
> Verzeichnis nicht gefunden
> compilation terminated.
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
> from at91sam9m10g45_devices.c:28:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:39:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from at91sam9m10g45_devices.c:28:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9g45.h:21:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/at91sam9m10g45ek.h:36:0: note: this is the location of the previous definition
> at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
> Verzeichnis nicht gefunden
> compilation terminated.
> make[1]: *** [at91sam9m10g45_devices.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for pm9g45 board...
> at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
> Verzeichnis nicht gefunden
> compilation terminated.
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
> from at91sam9m10g45_devices.c:28:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:39:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from at91sam9m10g45_devices.c:28:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9g45.h:21:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/pm9g45.h:35:0:
> note: this is the location of the previous definition
> at91sam9m10g45_devices.c:29:25: fatal error: asm/arch/io.h: Datei oder
> Verzeichnis nicht gefunden
> compilation terminated.
> make[1]: *** [at91sam9m10g45_devices.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for SBC35_A9G20 board...
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
> from at91sam9260_devices.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from at91sam9260_devices.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/sbc35_a9g20.h:47:0:
> note: this is the location of the previous definition
> make[1]: *** [at91sam9260_devices.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for TNY_A9260 board...
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
> from at91sam9260_devices.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from at91sam9260_devices.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/tny_a9260.h:57:0:
> note: this is the location of the previous definition
> make[1]: *** [at91sam9260_devices.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Configuring for TNY_A9G20 board...
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:18:0,
> from at91sam9260_devices.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91_pio.h:91:19:
> error: ?ATMEL_PIO_PORTS? undeclared here (not in a function)
> In file included
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/hardware.h:31:0,
>
> from /home/reinhard/embedded/u-boot-atmel/include/asm/arch/gpio.h:19,
> from at91sam9260_devices.c:29:
> /home/reinhard/embedded/u-boot-atmel/include/asm/arch/at91sam9260.h:27:0: warning: "CONFIG_ARM926EJS" redefined
> /home/reinhard/embedded/u-boot-atmel/include/configs/tny_a9260.h:57:0:
> note: this is the location of the previous definition
> make[1]: *** [at91sam9260_devices.o] Fehler 1
> make: *** [arch/arm/cpu/arm926ejs/at91/libat91.o] Fehler 2
> arm-linux-gnueabi-size: './u-boot': No such file
>
> Best Regards,
> Reinhard
>
> _______________________________________________
> U-Boot mailing list
> U-Boot at lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
--
------------------------------------------------------------------------
Dipl.-Ing. Matthias Fuchs
Head of System Design
esd electronic system design gmbh
Vahrenwalder Str. 207 - 30165 Hannover - GERMANY
Phone: +49-511-37298-0 - Fax: +49-511-37298-68
Please visit our homepage http://www.esd.eu
Quality Products - Made in Germany
Besuchen Sie uns auf der Hannover Messe 2011
in Halle 9, Stand D13 vom 04.-08. April 2011 in Hannover!
-------------------------------------------------------------------------
Gesch?ftsf?hrer: Klaus Detering
Amtsgericht Hannover HRB 51373 - VAT-ID DE 115672832
-------------------------------------------------------------------------
prev parent reply other threads:[~2011-08-04 7:52 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-02 12:37 [U-Boot] [STATUS] AT91: boards still broken on 02.Aug.2011 Reinhard Meyer
2011-08-02 13:23 ` Thomas Petazzoni
2011-08-02 13:36 ` Reinhard Meyer
2011-08-03 2:08 ` Hong Xu
2011-08-03 7:37 ` Thomas Petazzoni
2011-08-03 7:43 ` Reinhard Meyer
2011-08-04 7:52 ` Matthias Fuchs [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4E3A4FD7.4070402@esd.eu \
--to=matthias.fuchs@esd.eu \
--cc=u-boot@lists.denx.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.