From: "G, Manjunath Kondaiah" <manjugk@ti.com>
To: devicetree-discuss@lists.ozlabs.org
Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
grant.likely@secretlab.ca, Kevin Hilman <khilman@ti.com>
Subject: [RFC/PATCH 02/14] OMAP: omap_device: replace debug/warning/error prints with dev_* macros
Date: Tue, 09 Aug 2011 19:10:20 +0500 [thread overview]
Message-ID: <1312897232-4792-3-git-send-email-manjugk@ti.com> (raw)
In-Reply-To: 1312897232-4792-1-git-send-email-manjugk@ti.com
From: Kevin Hilman <khilman@ti.com>
For consistency in kernel printk output for devices, use dev_dbg(),
dev_warn(), dev_err() instead of pr_debug(), pr_warning() and
pr_err(), some of which currently use direct access of name from
platform_device and others of which use dev_name(). Using the dev_*
versions uses the standard device naming from the driver core.
Some pr_* prints were not converted with this patch since they are
used before the platform_device and struct device are created so
neither the dev_* prints or dev_name() is valid.
Reported-by: Russell King <rmk+kernel@arm.linux.org.uk>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Kevin Hilman <khilman@ti.com>
---
arch/arm/plat-omap/omap_device.c | 70 +++++++++++++++++++-------------------
1 files changed, 35 insertions(+), 35 deletions(-)
diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c
index c8b9cd1..1d69596 100644
--- a/arch/arm/plat-omap/omap_device.c
+++ b/arch/arm/plat-omap/omap_device.c
@@ -114,7 +114,7 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
{
struct timespec a, b, c;
- pr_debug("omap_device: %s: activating\n", od->pdev.name);
+ dev_dbg(&od->pdev.dev, "omap_device: activating\n");
while (od->pm_lat_level > 0) {
struct omap_device_pm_latency *odpl;
@@ -138,25 +138,24 @@ static int _omap_device_activate(struct omap_device *od, u8 ignore_lat)
c = timespec_sub(b, a);
act_lat = timespec_to_ns(&c);
- pr_debug("omap_device: %s: pm_lat %d: activate: elapsed time "
- "%llu nsec\n", od->pdev.name, od->pm_lat_level,
- act_lat);
+ dev_dbg(&od->pdev.dev,
+ "omap_device: pm_lat %d: activate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, act_lat);
if (act_lat > odpl->activate_lat) {
odpl->activate_lat_worst = act_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->activate_lat = act_lat;
- pr_warning("omap_device: %s.%d: new worst case "
- "activate latency %d: %llu\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, act_lat);
+ dev_warn(&od->pdev.dev,
+ "new worst case activate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, act_lat);
} else
- pr_warning("omap_device: %s.%d: activate "
- "latency %d higher than exptected. "
- "(%llu > %d)\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, act_lat,
- odpl->activate_lat);
+ dev_warn(&od->pdev.dev,
+ "activate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, act_lat,
+ odpl->activate_lat);
}
od->dev_wakeup_lat -= odpl->activate_lat;
@@ -183,7 +182,7 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
{
struct timespec a, b, c;
- pr_debug("omap_device: %s: deactivating\n", od->pdev.name);
+ dev_dbg(&od->pdev.dev, "omap_device: deactivating\n");
while (od->pm_lat_level < od->pm_lats_cnt) {
struct omap_device_pm_latency *odpl;
@@ -206,28 +205,26 @@ static int _omap_device_deactivate(struct omap_device *od, u8 ignore_lat)
c = timespec_sub(b, a);
deact_lat = timespec_to_ns(&c);
- pr_debug("omap_device: %s: pm_lat %d: deactivate: elapsed time "
- "%llu nsec\n", od->pdev.name, od->pm_lat_level,
- deact_lat);
+ dev_dbg(&od->pdev.dev,
+ "omap_device: pm_lat %d: deactivate: elapsed time "
+ "%llu nsec\n", od->pm_lat_level, deact_lat);
if (deact_lat > odpl->deactivate_lat) {
odpl->deactivate_lat_worst = deact_lat;
if (odpl->flags & OMAP_DEVICE_LATENCY_AUTO_ADJUST) {
odpl->deactivate_lat = deact_lat;
- pr_warning("omap_device: %s.%d: new worst case "
- "deactivate latency %d: %llu\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, deact_lat);
+ dev_warn(&od->pdev.dev,
+ "new worst case deactivate latency "
+ "%d: %llu\n",
+ od->pm_lat_level, deact_lat);
} else
- pr_warning("omap_device: %s.%d: deactivate "
- "latency %d higher than exptected. "
- "(%llu > %d)\n",
- od->pdev.name, od->pdev.id,
- od->pm_lat_level, deact_lat,
- odpl->deactivate_lat);
+ dev_warn(&od->pdev.dev,
+ "deactivate latency %d "
+ "higher than exptected. (%llu > %d)\n",
+ od->pm_lat_level, deact_lat,
+ odpl->deactivate_lat);
}
-
od->dev_wakeup_lat += odpl->activate_lat;
od->pm_lat_level++;
@@ -609,8 +606,9 @@ int omap_device_enable(struct platform_device *pdev)
od = to_omap_device(pdev);
if (od->_state == OMAP_DEVICE_STATE_ENABLED) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -648,8 +646,9 @@ int omap_device_idle(struct platform_device *pdev)
od = to_omap_device(pdev);
if (od->_state != OMAP_DEVICE_STATE_ENABLED) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
@@ -680,8 +679,9 @@ int omap_device_shutdown(struct platform_device *pdev)
if (od->_state != OMAP_DEVICE_STATE_ENABLED &&
od->_state != OMAP_DEVICE_STATE_IDLE) {
- WARN(1, "omap_device: %s.%d: %s() called from invalid state %d\n",
- od->pdev.name, od->pdev.id, __func__, od->_state);
+ dev_warn(&pdev->dev,
+ "omap_device: %s() called from invalid state %d\n",
+ __func__, od->_state);
return -EINVAL;
}
--
1.7.1
next prev parent reply other threads:[~2011-08-09 13:53 UTC|newest]
Thread overview: 63+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-09 14:10 [RFC/PATCH 00/14] dt: omap hwmod-dt binding and omap3 i2c1 dt support G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 01/14] OMAP: omap_device: replace _find_by_pdev() with to_omap_device() G, Manjunath Kondaiah
2011-08-09 14:10 ` G, Manjunath Kondaiah [this message]
2011-08-09 14:10 ` [RFC/PATCH 03/14] OMAP3: beagle: don't touch omap_device internals G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 04/14] OMAP: McBSP: use existing macros for converting between devices G, Manjunath Kondaiah
2011-08-10 7:07 ` Jarkko Nikula
2011-08-10 7:07 ` Jarkko Nikula
2011-08-10 10:15 ` Cousson, Benoit
2011-08-10 10:15 ` Cousson, Benoit
2011-08-10 16:05 ` G, Manjunath Kondaiah
2011-08-10 16:05 ` G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 05/14] OMAP: omap_device: remove internal functions from omap_device.h G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 06/14] OMAP: omap_device: when building return platform_device instead of omap_device G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 07/14] ARM: platform_device: pdev_archdata: add omap_device pointer G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 08/14] omap2+: Use Kconfig symbol in Makefile instead of obj-y G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 09/14] dt: omap: prepare hwmod to support dt G, Manjunath Kondaiah
2011-08-10 11:51 ` Cousson, Benoit
2011-08-10 11:51 ` Cousson, Benoit
2011-08-10 16:28 ` G, Manjunath Kondaiah
2011-08-10 16:28 ` G, Manjunath Kondaiah
2011-08-10 17:11 ` Cousson, Benoit
2011-08-10 17:11 ` Cousson, Benoit
2011-08-10 18:03 ` G, Manjunath Kondaiah
2011-08-10 18:03 ` G, Manjunath Kondaiah
[not found] ` <CAC63_iSX0cjauOj=CcTABqgSWAgYRE_G7Qio5y2BrpeRnkhEWQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2011-08-10 18:06 ` Cousson, Benoit
2011-08-10 18:06 ` Cousson, Benoit
2011-08-16 15:02 ` G, Manjunath Kondaiah
2011-08-16 15:02 ` G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 10/14] dt: Add pd_size to AUXDATA structure G, Manjunath Kondaiah
[not found] ` <1312897232-4792-11-git-send-email-manjugk-l0cyMroinI0@public.gmane.org>
2011-08-10 11:57 ` Cousson, Benoit
2011-08-10 11:57 ` Cousson, Benoit
2011-08-10 13:16 ` Grant Likely
2011-08-10 13:16 ` Grant Likely
2011-08-10 16:02 ` G, Manjunath Kondaiah
2011-08-10 16:02 ` G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 11/14] dt: omap3: add soc file for handling i2c controllers G, Manjunath Kondaiah
2011-08-10 12:36 ` Cousson, Benoit
2011-08-10 12:36 ` Cousson, Benoit
2011-08-10 16:57 ` G, Manjunath Kondaiah
2011-08-10 16:57 ` G, Manjunath Kondaiah
2011-08-10 17:45 ` Cousson, Benoit
2011-08-10 17:45 ` Cousson, Benoit
2011-08-16 6:32 ` G, Manjunath Kondaiah
2011-08-16 6:32 ` G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 12/14] dt: omap3: beagle board: set clock freq for i2c devices G, Manjunath Kondaiah
2011-08-10 12:42 ` Cousson, Benoit
2011-08-10 12:42 ` Cousson, Benoit
2011-08-10 16:45 ` G, Manjunath Kondaiah
2011-08-10 16:45 ` G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 13/14] dt: omap3: add generic board file for dt support G, Manjunath Kondaiah
2011-08-09 14:10 ` [RFC/PATCH 14/14] dt: omap3: enable dt support for i2c1 controller G, Manjunath Kondaiah
2011-08-10 12:57 ` Cousson, Benoit
2011-08-10 12:57 ` Cousson, Benoit
2011-08-16 18:44 ` G, Manjunath Kondaiah
2011-08-16 18:44 ` G, Manjunath Kondaiah
2011-08-10 5:26 ` [RFC/PATCH 00/14] dt: omap hwmod-dt binding and omap3 i2c1 dt support Rajendra Nayak
2011-08-10 5:26 ` Rajendra Nayak
2011-08-10 5:30 ` G, Manjunath Kondaiah
2011-08-10 5:30 ` G, Manjunath Kondaiah
2011-08-10 5:39 ` Rajendra Nayak
2011-08-10 5:39 ` Rajendra Nayak
2011-08-10 6:28 ` G, Manjunath Kondaiah
2011-08-10 6:28 ` G, Manjunath Kondaiah
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1312897232-4792-3-git-send-email-manjugk@ti.com \
--to=manjugk@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=khilman@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.