From: Stephen Boyd <sboyd@codeaurora.org>
To: Sam Ravnborg <sam@ravnborg.org>
Cc: linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kbuild@vger.kernel.org
Subject: [PATCH] ARM: zImage: Skip relinking if nothing changes
Date: Fri, 12 Aug 2011 12:00:02 -0700 [thread overview]
Message-ID: <1313175602-21834-1-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <4E457682.5020107@codeaurora.org>
lib1funcs.S is reshipped even though the file hasn't changed
because the make rule is marked with FORCE. According to Sam
Ravnborg:
The FORCE prerequisite will tell make to always execute
the command.
But we only want to execute the command if:
1) $(obj)/lib1funcs.S is missing
2) or $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S is not
older then $(obj)/lib1funcs.S
So dropping FORCE should be a safe thing to do.
This fixes the shipped problem, but we still have to reassemble
lib1funcs.S because it isn't part of $targets. Add
lib1funcs.{S,o} to $targets to avoid relinking the compressed
vmlinux if nothing changes.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
---
arch/arm/boot/compressed/Makefile | 8 +++-----
1 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 0c74a6f..937fd26 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -91,7 +91,7 @@ suffix_$(CONFIG_KERNEL_LZMA) = lzma
targets := vmlinux vmlinux.lds \
piggy.$(suffix_y) piggy.$(suffix_y).o \
- font.o font.c head.o misc.o $(OBJS)
+ font.o font.c head.o misc.o lib1funcs.o lib1funcs.S $(OBJS)
# Make sure files are removed during clean
extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
@@ -121,9 +121,7 @@ LDFLAGS_vmlinux += -X
LDFLAGS_vmlinux += -T
# For __aeabi_uidivmod
-lib1funcs = $(obj)/lib1funcs.o
-
-$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
+$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S
$(call cmd,shipped)
# We need to prevent any GOTOFF relocs being used with references
@@ -140,7 +138,7 @@ bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
echo "$$bad_syms" >&2; rm -f $@; false )
$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
- $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
+ $(addprefix $(obj)/, $(OBJS)) $(obj)/lib1funcs.o FORCE
$(call if_changed,ld)
@$(check_for_bad_syms)
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
WARNING: multiple messages have this Message-ID (diff)
From: sboyd@codeaurora.org (Stephen Boyd)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: zImage: Skip relinking if nothing changes
Date: Fri, 12 Aug 2011 12:00:02 -0700 [thread overview]
Message-ID: <1313175602-21834-1-git-send-email-sboyd@codeaurora.org> (raw)
In-Reply-To: <4E457682.5020107@codeaurora.org>
lib1funcs.S is reshipped even though the file hasn't changed
because the make rule is marked with FORCE. According to Sam
Ravnborg:
The FORCE prerequisite will tell make to always execute
the command.
But we only want to execute the command if:
1) $(obj)/lib1funcs.S is missing
2) or $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S is not
older then $(obj)/lib1funcs.S
So dropping FORCE should be a safe thing to do.
This fixes the shipped problem, but we still have to reassemble
lib1funcs.S because it isn't part of $targets. Add
lib1funcs.{S,o} to $targets to avoid relinking the compressed
vmlinux if nothing changes.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
---
arch/arm/boot/compressed/Makefile | 8 +++-----
1 files changed, 3 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/compressed/Makefile b/arch/arm/boot/compressed/Makefile
index 0c74a6f..937fd26 100644
--- a/arch/arm/boot/compressed/Makefile
+++ b/arch/arm/boot/compressed/Makefile
@@ -91,7 +91,7 @@ suffix_$(CONFIG_KERNEL_LZMA) = lzma
targets := vmlinux vmlinux.lds \
piggy.$(suffix_y) piggy.$(suffix_y).o \
- font.o font.c head.o misc.o $(OBJS)
+ font.o font.c head.o misc.o lib1funcs.o lib1funcs.S $(OBJS)
# Make sure files are removed during clean
extra-y += piggy.gzip piggy.lzo piggy.lzma lib1funcs.S
@@ -121,9 +121,7 @@ LDFLAGS_vmlinux += -X
LDFLAGS_vmlinux += -T
# For __aeabi_uidivmod
-lib1funcs = $(obj)/lib1funcs.o
-
-$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S FORCE
+$(obj)/lib1funcs.S: $(srctree)/arch/$(SRCARCH)/lib/lib1funcs.S
$(call cmd,shipped)
# We need to prevent any GOTOFF relocs being used with references
@@ -140,7 +138,7 @@ bad_syms=$$($(CROSS_COMPILE)nm $@ | sed -n 's/^.\{8\} [bc] \(.*\)/\1/p') && \
echo "$$bad_syms" >&2; rm -f $@; false )
$(obj)/vmlinux: $(obj)/vmlinux.lds $(obj)/$(HEAD) $(obj)/piggy.$(suffix_y).o \
- $(addprefix $(obj)/, $(OBJS)) $(lib1funcs) FORCE
+ $(addprefix $(obj)/, $(OBJS)) $(obj)/lib1funcs.o FORCE
$(call if_changed,ld)
@$(check_for_bad_syms)
--
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2011-08-12 19:00 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-08-12 17:46 Relinking zImage when nothing changes Stephen Boyd
2011-08-12 17:46 ` Stephen Boyd
2011-08-12 18:02 ` Sam Ravnborg
2011-08-12 18:02 ` Sam Ravnborg
2011-08-12 18:12 ` Stephen Boyd
2011-08-12 18:12 ` Stephen Boyd
2011-08-12 18:34 ` Sam Ravnborg
2011-08-12 18:34 ` Sam Ravnborg
2011-08-12 18:52 ` Stephen Boyd
2011-08-12 18:52 ` Stephen Boyd
2011-08-12 19:00 ` Stephen Boyd [this message]
2011-08-12 19:00 ` [PATCH] ARM: zImage: Skip relinking if " Stephen Boyd
2011-08-12 20:48 ` Arnaud Lacombe
2011-08-12 20:48 ` Arnaud Lacombe
2011-08-12 20:55 ` Russell King - ARM Linux
2011-08-12 20:55 ` Russell King - ARM Linux
2011-08-12 21:41 ` Arnaud Lacombe
2011-08-12 21:41 ` Arnaud Lacombe
2011-08-12 22:03 ` Sam Ravnborg
2011-08-12 22:03 ` Sam Ravnborg
2011-08-12 22:17 ` Arnaud Lacombe
2011-08-12 22:17 ` Arnaud Lacombe
2011-08-13 6:34 ` Sam Ravnborg
2011-08-13 6:34 ` Sam Ravnborg
2011-08-13 16:02 ` Arnaud Lacombe
2011-08-13 16:02 ` Arnaud Lacombe
2011-08-12 22:32 ` Arnaud Lacombe
2011-08-12 22:32 ` Arnaud Lacombe
2011-08-18 3:44 ` Nicolas Pitre
2011-08-18 3:44 ` Nicolas Pitre
2011-08-18 18:03 ` Arnaud Lacombe
2011-08-18 18:03 ` Arnaud Lacombe
2011-08-18 19:31 ` Russell King - ARM Linux
2011-08-18 19:31 ` Russell King - ARM Linux
2011-08-18 22:25 ` Troy Kisky
2011-08-18 22:25 ` Troy Kisky
2011-08-18 22:38 ` Arnaud Lacombe
2011-08-18 22:38 ` Arnaud Lacombe
2011-08-12 20:20 ` Relinking zImage when " Arnaud Lacombe
2011-08-12 20:20 ` Arnaud Lacombe
2011-08-12 20:24 ` Sam Ravnborg
2011-08-12 20:24 ` Sam Ravnborg
2011-08-12 20:31 ` Arnaud Lacombe
2011-08-12 20:31 ` Arnaud Lacombe
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1313175602-21834-1-git-send-email-sboyd@codeaurora.org \
--to=sboyd@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kbuild@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=sam@ravnborg.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.