From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: alsa-devel@alsa-project.org,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>
Subject: [PATCH 01/11] ASoC: wm8510: Convert to snd_soc_write
Date: Fri, 07 Oct 2011 07:45:07 +0800 [thread overview]
Message-ID: <1317944707.5579.3.camel@phoenix> (raw)
In-Reply-To: <1317944619.5579.1.camel@phoenix>
Convert codec->hw_write to snd_soc_write
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
sound/soc/codecs/wm8510.c | 33 ++++++++++++++++++++++-----------
1 files changed, 22 insertions(+), 11 deletions(-)
diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index 55a4c83..fc8bc9c 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -463,6 +463,26 @@ static int wm8510_mute(struct snd_soc_dai *dai, int mute)
return 0;
}
+static void wm8510_sync_cache(struct snd_soc_codec *codec)
+{
+ short i;
+ u16 *cache;
+
+ if (!codec->cache_sync)
+ return;
+ codec->cache_only = 0;
+ codec->cache_bypass = 0;
+ /* restore cache */
+ cache = codec->reg_cache;
+ for (i = 0; i < codec->driver->reg_cache_size; i++) {
+ if (i == WM8510_RESET || cache[i] == wm8510_reg[i])
+ continue;
+ snd_soc_write(codec, i, cache[i]);
+ }
+ codec->cache_bypass = 1;
+ codec->cache_sync = 0;
+}
+
/* liam need to make this lower power with dapm */
static int wm8510_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
@@ -480,6 +500,8 @@ static int wm8510_set_bias_level(struct snd_soc_codec *codec,
power1 |= WM8510_POWER1_BIASEN | WM8510_POWER1_BUFIOEN;
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+ wm8510_sync_cache(codec);
+
/* Initial cap charge at VMID 5k */
snd_soc_write(codec, WM8510_POWER1, power1 | 0x3);
mdelay(100);
@@ -541,18 +563,7 @@ static int wm8510_suspend(struct snd_soc_codec *codec, pm_message_t state)
static int wm8510_resume(struct snd_soc_codec *codec)
{
- int i;
- u8 data[2];
- u16 *cache = codec->reg_cache;
-
- /* Sync reg_cache with the hardware */
- for (i = 0; i < ARRAY_SIZE(wm8510_reg); i++) {
- data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
- data[1] = cache[i] & 0x00ff;
- codec->hw_write(codec->control_data, data, 2);
- }
wm8510_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
return 0;
}
--
1.7.4.1
WARNING: multiple messages have this Message-ID (diff)
From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>,
alsa-devel@alsa-project.org
Subject: [PATCH 01/11] ASoC: wm8510: Convert to snd_soc_write
Date: Fri, 07 Oct 2011 07:45:07 +0800 [thread overview]
Message-ID: <1317944707.5579.3.camel@phoenix> (raw)
In-Reply-To: <1317944619.5579.1.camel@phoenix>
Convert codec->hw_write to snd_soc_write
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
sound/soc/codecs/wm8510.c | 33 ++++++++++++++++++++++-----------
1 files changed, 22 insertions(+), 11 deletions(-)
diff --git a/sound/soc/codecs/wm8510.c b/sound/soc/codecs/wm8510.c
index 55a4c83..fc8bc9c 100644
--- a/sound/soc/codecs/wm8510.c
+++ b/sound/soc/codecs/wm8510.c
@@ -463,6 +463,26 @@ static int wm8510_mute(struct snd_soc_dai *dai, int mute)
return 0;
}
+static void wm8510_sync_cache(struct snd_soc_codec *codec)
+{
+ short i;
+ u16 *cache;
+
+ if (!codec->cache_sync)
+ return;
+ codec->cache_only = 0;
+ codec->cache_bypass = 0;
+ /* restore cache */
+ cache = codec->reg_cache;
+ for (i = 0; i < codec->driver->reg_cache_size; i++) {
+ if (i == WM8510_RESET || cache[i] == wm8510_reg[i])
+ continue;
+ snd_soc_write(codec, i, cache[i]);
+ }
+ codec->cache_bypass = 1;
+ codec->cache_sync = 0;
+}
+
/* liam need to make this lower power with dapm */
static int wm8510_set_bias_level(struct snd_soc_codec *codec,
enum snd_soc_bias_level level)
@@ -480,6 +500,8 @@ static int wm8510_set_bias_level(struct snd_soc_codec *codec,
power1 |= WM8510_POWER1_BIASEN | WM8510_POWER1_BUFIOEN;
if (codec->dapm.bias_level == SND_SOC_BIAS_OFF) {
+ wm8510_sync_cache(codec);
+
/* Initial cap charge at VMID 5k */
snd_soc_write(codec, WM8510_POWER1, power1 | 0x3);
mdelay(100);
@@ -541,18 +563,7 @@ static int wm8510_suspend(struct snd_soc_codec *codec, pm_message_t state)
static int wm8510_resume(struct snd_soc_codec *codec)
{
- int i;
- u8 data[2];
- u16 *cache = codec->reg_cache;
-
- /* Sync reg_cache with the hardware */
- for (i = 0; i < ARRAY_SIZE(wm8510_reg); i++) {
- data[0] = (i << 1) | ((cache[i] >> 8) & 0x0001);
- data[1] = cache[i] & 0x00ff;
- codec->hw_write(codec->control_data, data, 2);
- }
wm8510_set_bias_level(codec, SND_SOC_BIAS_STANDBY);
-
return 0;
}
--
1.7.4.1
next prev parent reply other threads:[~2011-10-06 23:45 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-06 23:43 [PATCH 00/11 v2] Convert wm8xxx codec drivers to use snd_soc_write/snd_soc_cache_sync Axel Lin
2011-10-06 23:43 ` Axel Lin
2011-10-06 23:45 ` Axel Lin [this message]
2011-10-06 23:45 ` [PATCH 01/11] ASoC: wm8510: Convert to snd_soc_write Axel Lin
2011-10-07 2:40 ` [PATCH 01/11 RESEND] " Axel Lin
2011-10-07 2:40 ` Axel Lin
2011-10-07 9:57 ` Mark Brown
2011-10-07 9:57 ` Mark Brown
2011-10-07 13:10 ` Axel Lin
2011-10-06 23:46 ` [PATCH 02/11] ASoC: wm8711: " Axel Lin
2011-10-06 23:46 ` Axel Lin
2011-10-06 23:47 ` [PATCH 03/11] ASoC: wm8731: " Axel Lin
2011-10-06 23:47 ` Axel Lin
2011-10-06 23:49 ` [PATCH 04/11] ASoC: wm8750: " Axel Lin
2011-10-06 23:49 ` Axel Lin
2011-10-06 23:50 ` [PATCH 05/11] ASoC: wm8776: " Axel Lin
2011-10-06 23:50 ` Axel Lin
2011-10-06 23:52 ` [PATCH 06/11] ASoC: wm8940: Convert to snd_soc_cache_sync Axel Lin
2011-10-06 23:53 ` [PATCH 07/11] ASoC: wm8960: Convert to snd_soc_write Axel Lin
2011-10-06 23:53 ` Axel Lin
2011-10-06 23:54 ` [PATCH 08/11] ASoC: wm8971: " Axel Lin
2011-10-06 23:54 ` Axel Lin
2011-10-06 23:55 ` [PATCH 09/11] ASoC: wm8974: " Axel Lin
2011-10-06 23:55 ` Axel Lin
2011-10-06 23:55 ` [PATCH 10/11] ASoC: wm8988: " Axel Lin
2011-10-06 23:55 ` Axel Lin
2011-10-06 23:56 ` [PATCH 11/11] ASoC: wm8990: Convert to snd_soc_cache_sync Axel Lin
2011-10-06 23:56 ` Axel Lin
2011-10-07 10:23 ` Mark Brown
2011-10-07 10:23 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1317944707.5579.3.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.