* [PATCH 3/6] lpfc 8.3.27: Change algorithm for getting physical port name
@ 2011-10-11 1:33 James Smart
0 siblings, 0 replies; only message in thread
From: James Smart @ 2011-10-11 1:33 UTC (permalink / raw)
To: linux-scsi
Implemented new algorithm for getting physical port name for all SLI4 devices
Signed-off-by: Alex Iannicelli <alex.iannicelli@emulex.com>
Signed-off-by: James Smart <james.smart@emulex.com>
---
lpfc_hw4.h | 161 +++++++++++++++++++++++++++++++++++++++++++++++++++++
lpfc_init.c | 17 ++++-
lpfc_sli.c | 180 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
lpfc_sli4.h | 14 ++++
4 files changed, 366 insertions(+), 6 deletions(-)
diff -upNr a/drivers/scsi/lpfc/lpfc_hw4.h b/drivers/scsi/lpfc/lpfc_hw4.h
--- a/drivers/scsi/lpfc/lpfc_hw4.h 2011-10-10 16:46:36.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_hw4.h 2011-10-10 16:46:37.000000000 -0400
@@ -785,6 +785,8 @@ union lpfc_sli4_cfg_shdr {
#define LPFC_Q_CREATE_VERSION_2 2
#define LPFC_Q_CREATE_VERSION_1 1
#define LPFC_Q_CREATE_VERSION_0 0
+#define LPFC_OPCODE_VERSION_0 0
+#define LPFC_OPCODE_VERSION_1 1
} request;
struct {
uint32_t word6;
@@ -848,6 +850,7 @@ struct mbox_header {
#define LPFC_MBOX_OPCODE_EQ_DESTROY 0x37
#define LPFC_MBOX_OPCODE_QUERY_FW_CFG 0x3A
#define LPFC_MBOX_OPCODE_FUNCTION_RESET 0x3D
+#define LPFC_MBOX_OPCODE_GET_PORT_NAME 0x4D
#define LPFC_MBOX_OPCODE_MQ_CREATE_EXT 0x5A
#define LPFC_MBOX_OPCODE_GET_RSRC_EXTENT_INFO 0x9A
#define LPFC_MBOX_OPCODE_GET_ALLOC_RSRC_EXTENT 0x9B
@@ -2030,6 +2033,15 @@ struct lpfc_mbx_read_config {
#define lpfc_mbx_rd_conf_extnts_inuse_MASK 0x00000001
#define lpfc_mbx_rd_conf_extnts_inuse_WORD word1
uint32_t word2;
+#define lpfc_mbx_rd_conf_lnk_numb_SHIFT 0
+#define lpfc_mbx_rd_conf_lnk_numb_MASK 0x0000003F
+#define lpfc_mbx_rd_conf_lnk_numb_WORD word2
+#define lpfc_mbx_rd_conf_lnk_type_SHIFT 6
+#define lpfc_mbx_rd_conf_lnk_type_MASK 0x00000003
+#define lpfc_mbx_rd_conf_lnk_type_WORD word2
+#define lpfc_mbx_rd_conf_lnk_ldv_SHIFT 8
+#define lpfc_mbx_rd_conf_lnk_ldv_MASK 0x00000001
+#define lpfc_mbx_rd_conf_lnk_ldv_WORD word2
#define lpfc_mbx_rd_conf_topology_SHIFT 24
#define lpfc_mbx_rd_conf_topology_MASK 0x000000FF
#define lpfc_mbx_rd_conf_topology_WORD word2
@@ -2563,8 +2575,152 @@ struct lpfc_mbx_get_prof_cfg {
} u;
};
+struct lpfc_controller_attribute {
+ uint32_t version_string[8];
+ uint32_t manufacturer_name[8];
+ uint32_t supported_modes;
+ uint32_t word17;
+#define lpfc_cntl_attr_eprom_ver_lo_SHIFT 0
+#define lpfc_cntl_attr_eprom_ver_lo_MASK 0x000000ff
+#define lpfc_cntl_attr_eprom_ver_lo_WORD word17
+#define lpfc_cntl_attr_eprom_ver_hi_SHIFT 8
+#define lpfc_cntl_attr_eprom_ver_hi_MASK 0x000000ff
+#define lpfc_cntl_attr_eprom_ver_hi_WORD word17
+ uint32_t mbx_da_struct_ver;
+ uint32_t ep_fw_da_struct_ver;
+ uint32_t ncsi_ver_str[3];
+ uint32_t dflt_ext_timeout;
+ uint32_t model_number[8];
+ uint32_t description[16];
+ uint32_t serial_number[8];
+ uint32_t ip_ver_str[8];
+ uint32_t fw_ver_str[8];
+ uint32_t bios_ver_str[8];
+ uint32_t redboot_ver_str[8];
+ uint32_t driver_ver_str[8];
+ uint32_t flash_fw_ver_str[8];
+ uint32_t functionality;
+ uint32_t word105;
+#define lpfc_cntl_attr_max_cbd_len_SHIFT 0
+#define lpfc_cntl_attr_max_cbd_len_MASK 0x0000ffff
+#define lpfc_cntl_attr_max_cbd_len_WORD word105
+#define lpfc_cntl_attr_asic_rev_SHIFT 16
+#define lpfc_cntl_attr_asic_rev_MASK 0x000000ff
+#define lpfc_cntl_attr_asic_rev_WORD word105
+#define lpfc_cntl_attr_gen_guid0_SHIFT 24
+#define lpfc_cntl_attr_gen_guid0_MASK 0x000000ff
+#define lpfc_cntl_attr_gen_guid0_WORD word105
+ uint32_t gen_guid1_12[3];
+ uint32_t word109;
+#define lpfc_cntl_attr_gen_guid13_14_SHIFT 0
+#define lpfc_cntl_attr_gen_guid13_14_MASK 0x0000ffff
+#define lpfc_cntl_attr_gen_guid13_14_WORD word109
+#define lpfc_cntl_attr_gen_guid15_SHIFT 16
+#define lpfc_cntl_attr_gen_guid15_MASK 0x000000ff
+#define lpfc_cntl_attr_gen_guid15_WORD word109
+#define lpfc_cntl_attr_hba_port_cnt_SHIFT 24
+#define lpfc_cntl_attr_hba_port_cnt_MASK 0x000000ff
+#define lpfc_cntl_attr_hba_port_cnt_WORD word109
+ uint32_t word110;
+#define lpfc_cntl_attr_dflt_lnk_tmo_SHIFT 0
+#define lpfc_cntl_attr_dflt_lnk_tmo_MASK 0x0000ffff
+#define lpfc_cntl_attr_dflt_lnk_tmo_WORD word110
+#define lpfc_cntl_attr_multi_func_dev_SHIFT 24
+#define lpfc_cntl_attr_multi_func_dev_MASK 0x000000ff
+#define lpfc_cntl_attr_multi_func_dev_WORD word110
+ uint32_t word111;
+#define lpfc_cntl_attr_cache_valid_SHIFT 0
+#define lpfc_cntl_attr_cache_valid_MASK 0x000000ff
+#define lpfc_cntl_attr_cache_valid_WORD word111
+#define lpfc_cntl_attr_hba_status_SHIFT 8
+#define lpfc_cntl_attr_hba_status_MASK 0x000000ff
+#define lpfc_cntl_attr_hba_status_WORD word111
+#define lpfc_cntl_attr_max_domain_SHIFT 16
+#define lpfc_cntl_attr_max_domain_MASK 0x000000ff
+#define lpfc_cntl_attr_max_domain_WORD word111
+#define lpfc_cntl_attr_lnk_numb_SHIFT 24
+#define lpfc_cntl_attr_lnk_numb_MASK 0x0000003f
+#define lpfc_cntl_attr_lnk_numb_WORD word111
+#define lpfc_cntl_attr_lnk_type_SHIFT 30
+#define lpfc_cntl_attr_lnk_type_MASK 0x00000003
+#define lpfc_cntl_attr_lnk_type_WORD word111
+ uint32_t fw_post_status;
+ uint32_t hba_mtu[8];
+ uint32_t word121;
+ uint32_t reserved1[3];
+ uint32_t word125;
+#define lpfc_cntl_attr_pci_vendor_id_SHIFT 0
+#define lpfc_cntl_attr_pci_vendor_id_MASK 0x0000ffff
+#define lpfc_cntl_attr_pci_vendor_id_WORD word125
+#define lpfc_cntl_attr_pci_device_id_SHIFT 16
+#define lpfc_cntl_attr_pci_device_id_MASK 0x0000ffff
+#define lpfc_cntl_attr_pci_device_id_WORD word125
+ uint32_t word126;
+#define lpfc_cntl_attr_pci_subvdr_id_SHIFT 0
+#define lpfc_cntl_attr_pci_subvdr_id_MASK 0x0000ffff
+#define lpfc_cntl_attr_pci_subvdr_id_WORD word126
+#define lpfc_cntl_attr_pci_subsys_id_SHIFT 16
+#define lpfc_cntl_attr_pci_subsys_id_MASK 0x0000ffff
+#define lpfc_cntl_attr_pci_subsys_id_WORD word126
+ uint32_t word127;
+#define lpfc_cntl_attr_pci_bus_num_SHIFT 0
+#define lpfc_cntl_attr_pci_bus_num_MASK 0x000000ff
+#define lpfc_cntl_attr_pci_bus_num_WORD word127
+#define lpfc_cntl_attr_pci_dev_num_SHIFT 8
+#define lpfc_cntl_attr_pci_dev_num_MASK 0x000000ff
+#define lpfc_cntl_attr_pci_dev_num_WORD word127
+#define lpfc_cntl_attr_pci_fnc_num_SHIFT 16
+#define lpfc_cntl_attr_pci_fnc_num_MASK 0x000000ff
+#define lpfc_cntl_attr_pci_fnc_num_WORD word127
+#define lpfc_cntl_attr_inf_type_SHIFT 24
+#define lpfc_cntl_attr_inf_type_MASK 0x000000ff
+#define lpfc_cntl_attr_inf_type_WORD word127
+ uint32_t unique_id[2];
+ uint32_t word130;
+#define lpfc_cntl_attr_num_netfil_SHIFT 0
+#define lpfc_cntl_attr_num_netfil_MASK 0x000000ff
+#define lpfc_cntl_attr_num_netfil_WORD word130
+ uint32_t reserved2[4];
+};
+
+struct lpfc_mbx_get_cntl_attributes {
+ union lpfc_sli4_cfg_shdr cfg_shdr;
+ struct lpfc_controller_attribute cntl_attr;
+};
+
+struct lpfc_mbx_get_port_name {
+ struct mbox_header header;
+ union {
+ struct {
+ uint32_t word4;
+#define lpfc_mbx_get_port_name_lnk_type_SHIFT 0
+#define lpfc_mbx_get_port_name_lnk_type_MASK 0x00000003
+#define lpfc_mbx_get_port_name_lnk_type_WORD word4
+ } request;
+ struct {
+ uint32_t word4;
+#define lpfc_mbx_get_port_name_name0_SHIFT 0
+#define lpfc_mbx_get_port_name_name0_MASK 0x000000FF
+#define lpfc_mbx_get_port_name_name0_WORD word4
+#define lpfc_mbx_get_port_name_name1_SHIFT 8
+#define lpfc_mbx_get_port_name_name1_MASK 0x000000FF
+#define lpfc_mbx_get_port_name_name1_WORD word4
+#define lpfc_mbx_get_port_name_name2_SHIFT 16
+#define lpfc_mbx_get_port_name_name2_MASK 0x000000FF
+#define lpfc_mbx_get_port_name_name2_WORD word4
+#define lpfc_mbx_get_port_name_name3_SHIFT 24
+#define lpfc_mbx_get_port_name_name3_MASK 0x000000FF
+#define lpfc_mbx_get_port_name_name3_WORD word4
+#define LPFC_LINK_NUMBER_0 0
+#define LPFC_LINK_NUMBER_1 1
+#define LPFC_LINK_NUMBER_2 2
+#define LPFC_LINK_NUMBER_3 3
+ } response;
+ } u;
+};
+
/* Mailbox Completion Queue Error Messages */
-#define MB_CQE_STATUS_SUCCESS 0x0
+#define MB_CQE_STATUS_SUCCESS 0x0
#define MB_CQE_STATUS_INSUFFICIENT_PRIVILEGES 0x1
#define MB_CQE_STATUS_INVALID_PARAMETER 0x2
#define MB_CQE_STATUS_INSUFFICIENT_RESOURCES 0x3
@@ -2648,8 +2804,9 @@ struct lpfc_mqe {
struct lpfc_mbx_run_link_diag_test link_diag_test;
struct lpfc_mbx_get_func_cfg get_func_cfg;
struct lpfc_mbx_get_prof_cfg get_prof_cfg;
- struct lpfc_mbx_nop nop;
struct lpfc_mbx_wr_object wr_object;
+ struct lpfc_mbx_get_port_name get_port_name;
+ struct lpfc_mbx_nop nop;
} un;
};
diff -upNr a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
--- a/drivers/scsi/lpfc/lpfc_init.c 2011-10-10 16:46:36.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_init.c 2011-10-10 16:46:37.000000000 -0400
@@ -1733,11 +1733,20 @@ lpfc_parse_vpd(struct lpfc_hba *phba, ui
j = 0;
Length -= (3+i);
while(i--) {
- phba->Port[j++] = vpd[index++];
- if (j == 19)
- break;
+ if ((phba->sli_rev == LPFC_SLI_REV4) &&
+ (phba->sli4_hba.pport_name_sta ==
+ LPFC_SLI4_PPNAME_GET)) {
+ j++;
+ index++;
+ } else
+ phba->Port[j++] = vpd[index++];
+ if (j == 19)
+ break;
}
- phba->Port[j] = 0;
+ if ((phba->sli_rev != LPFC_SLI_REV4) ||
+ (phba->sli4_hba.pport_name_sta ==
+ LPFC_SLI4_PPNAME_NON))
+ phba->Port[j] = 0;
continue;
}
else {
diff -upNr a/drivers/scsi/lpfc/lpfc_sli4.h b/drivers/scsi/lpfc/lpfc_sli4.h
--- a/drivers/scsi/lpfc/lpfc_sli4.h 2011-10-10 16:46:36.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_sli4.h 2011-10-10 16:46:37.000000000 -0400
@@ -389,6 +389,16 @@ struct lpfc_iov {
uint32_t vf_number;
};
+struct lpfc_sli4_lnk_info {
+ uint8_t lnk_dv;
+#define LPFC_LNK_DAT_INVAL 0
+#define LPFC_LNK_DAT_VAL 1
+ uint8_t lnk_tp;
+#define LPFC_LNK_GE 0x0 /* FCoE */
+#define LPFC_LNK_FC 0x1 /* FC */
+ uint8_t lnk_no;
+};
+
/* SLI4 HBA data structure entries */
struct lpfc_sli4_hba {
void __iomem *conf_regs_memmap_p; /* Kernel memory mapped address for
@@ -504,6 +514,10 @@ struct lpfc_sli4_hba {
struct list_head sp_els_xri_aborted_work_queue;
struct list_head sp_unsol_work_queue;
struct lpfc_sli4_link link_state;
+ struct lpfc_sli4_lnk_info lnk_info;
+ uint32_t pport_name_sta;
+#define LPFC_SLI4_PPNAME_NON 0
+#define LPFC_SLI4_PPNAME_GET 1
struct lpfc_iov iov;
spinlock_t abts_scsi_buf_list_lock; /* list of aborted SCSI IOs */
spinlock_t abts_sgl_list_lock; /* list of aborted els IOs */
diff -upNr a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
--- a/drivers/scsi/lpfc/lpfc_sli.c 2011-10-10 16:46:36.000000000 -0400
+++ b/drivers/scsi/lpfc/lpfc_sli.c 2011-10-10 16:46:37.000000000 -0400
@@ -4692,6 +4692,175 @@ lpfc_sli4_read_rev(struct lpfc_hba *phba
}
/**
+ * lpfc_sli4_retrieve_pport_name - Retrieve SLI4 device physical port name
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine retrieves SLI4 device physical port name this PCI function
+ * is attached to.
+ *
+ * Return codes
+ * 0 - sucessful
+ * otherwise - failed to retrieve physical port name
+ **/
+static int
+lpfc_sli4_retrieve_pport_name(struct lpfc_hba *phba)
+{
+ LPFC_MBOXQ_t *mboxq;
+ struct lpfc_mbx_read_config *rd_config;
+ struct lpfc_mbx_get_cntl_attributes *mbx_cntl_attr;
+ struct lpfc_controller_attribute *cntl_attr;
+ struct lpfc_mbx_get_port_name *get_port_name;
+ void *virtaddr = NULL;
+ uint32_t alloclen, reqlen;
+ uint32_t shdr_status, shdr_add_status;
+ union lpfc_sli4_cfg_shdr *shdr;
+ char cport_name = 0;
+ int rc;
+
+ /* We assume nothing at this point */
+ phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_INVAL;
+ phba->sli4_hba.pport_name_sta = LPFC_SLI4_PPNAME_NON;
+
+ mboxq = (LPFC_MBOXQ_t *)mempool_alloc(phba->mbox_mem_pool, GFP_KERNEL);
+ if (!mboxq)
+ return -ENOMEM;
+
+ /* obtain link type and link number via READ_CONFIG */
+ lpfc_read_config(phba, mboxq);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ if (rc == MBX_SUCCESS) {
+ rd_config = &mboxq->u.mqe.un.rd_config;
+ if (bf_get(lpfc_mbx_rd_conf_lnk_ldv, rd_config)) {
+ phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_VAL;
+ phba->sli4_hba.lnk_info.lnk_tp =
+ bf_get(lpfc_mbx_rd_conf_lnk_type, rd_config);
+ phba->sli4_hba.lnk_info.lnk_no =
+ bf_get(lpfc_mbx_rd_conf_lnk_numb, rd_config);
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3081 lnk_type:%d, lnk_numb:%d\n",
+ phba->sli4_hba.lnk_info.lnk_tp,
+ phba->sli4_hba.lnk_info.lnk_no);
+ goto retrieve_ppname;
+ } else
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "3082 Mailbox (x%x) returned ldv:x0\n",
+ bf_get(lpfc_mqe_command,
+ &mboxq->u.mqe));
+ } else
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "3083 Mailbox (x%x) failed, status:x%x\n",
+ bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+ bf_get(lpfc_mqe_status, &mboxq->u.mqe));
+
+ /* obtain link type and link number via COMMON_GET_CNTL_ATTRIBUTES */
+ reqlen = sizeof(struct lpfc_mbx_get_cntl_attributes);
+ alloclen = lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_GET_CNTL_ATTRIBUTES, reqlen,
+ LPFC_SLI4_MBX_NEMBED);
+ if (alloclen < reqlen) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_SLI,
+ "3084 Allocated DMA memory size (%d) is "
+ "less than the requested DMA memory size "
+ "(%d)\n", alloclen, reqlen);
+ rc = -ENOMEM;
+ goto out_free_mboxq;
+ }
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ virtaddr = mboxq->sge_array->addr[0];
+ mbx_cntl_attr = (struct lpfc_mbx_get_cntl_attributes *)virtaddr;
+ shdr = &mbx_cntl_attr->cfg_shdr;
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "3085 Mailbox x%x (x%x/x%x) failed, "
+ "rc:x%x, status:x%x, add_status:x%x\n",
+ bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
+ rc, shdr_status, shdr_add_status);
+ rc = -ENXIO;
+ goto out_free_mboxq;
+ }
+ cntl_attr = &mbx_cntl_attr->cntl_attr;
+ phba->sli4_hba.lnk_info.lnk_dv = LPFC_LNK_DAT_VAL;
+ phba->sli4_hba.lnk_info.lnk_tp =
+ bf_get(lpfc_cntl_attr_lnk_type, cntl_attr);
+ phba->sli4_hba.lnk_info.lnk_no =
+ bf_get(lpfc_cntl_attr_lnk_numb, cntl_attr);
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3086 lnk_type:%d, lnk_numb:%d\n",
+ phba->sli4_hba.lnk_info.lnk_tp,
+ phba->sli4_hba.lnk_info.lnk_no);
+
+retrieve_ppname:
+ lpfc_sli4_config(phba, mboxq, LPFC_MBOX_SUBSYSTEM_COMMON,
+ LPFC_MBOX_OPCODE_GET_PORT_NAME,
+ sizeof(struct lpfc_mbx_get_port_name) -
+ sizeof(struct lpfc_sli4_cfg_mhdr),
+ LPFC_SLI4_MBX_EMBED);
+ get_port_name = &mboxq->u.mqe.un.get_port_name;
+ shdr = (union lpfc_sli4_cfg_shdr *)&get_port_name->header.cfg_shdr;
+ bf_set(lpfc_mbox_hdr_version, &shdr->request, LPFC_OPCODE_VERSION_1);
+ bf_set(lpfc_mbx_get_port_name_lnk_type, &get_port_name->u.request,
+ phba->sli4_hba.lnk_info.lnk_tp);
+ rc = lpfc_sli_issue_mbox(phba, mboxq, MBX_POLL);
+ shdr_status = bf_get(lpfc_mbox_hdr_status, &shdr->response);
+ shdr_add_status = bf_get(lpfc_mbox_hdr_add_status, &shdr->response);
+ if (shdr_status || shdr_add_status || rc) {
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
+ "3087 Mailbox x%x (x%x/x%x) failed: "
+ "rc:x%x, status:x%x, add_status:x%x\n",
+ bf_get(lpfc_mqe_command, &mboxq->u.mqe),
+ lpfc_sli_config_mbox_subsys_get(phba, mboxq),
+ lpfc_sli_config_mbox_opcode_get(phba, mboxq),
+ rc, shdr_status, shdr_add_status);
+ rc = -ENXIO;
+ goto out_free_mboxq;
+ }
+ switch (phba->sli4_hba.lnk_info.lnk_no) {
+ case LPFC_LINK_NUMBER_0:
+ cport_name = bf_get(lpfc_mbx_get_port_name_name0,
+ &get_port_name->u.response);
+ phba->sli4_hba.pport_name_sta = LPFC_SLI4_PPNAME_GET;
+ break;
+ case LPFC_LINK_NUMBER_1:
+ cport_name = bf_get(lpfc_mbx_get_port_name_name1,
+ &get_port_name->u.response);
+ phba->sli4_hba.pport_name_sta = LPFC_SLI4_PPNAME_GET;
+ break;
+ case LPFC_LINK_NUMBER_2:
+ cport_name = bf_get(lpfc_mbx_get_port_name_name2,
+ &get_port_name->u.response);
+ phba->sli4_hba.pport_name_sta = LPFC_SLI4_PPNAME_GET;
+ break;
+ case LPFC_LINK_NUMBER_3:
+ cport_name = bf_get(lpfc_mbx_get_port_name_name3,
+ &get_port_name->u.response);
+ phba->sli4_hba.pport_name_sta = LPFC_SLI4_PPNAME_GET;
+ break;
+ default:
+ break;
+ }
+
+ if (phba->sli4_hba.pport_name_sta == LPFC_SLI4_PPNAME_GET) {
+ phba->Port[0] = cport_name;
+ phba->Port[1] = '\0';
+ lpfc_printf_log(phba, KERN_INFO, LOG_SLI,
+ "3091 SLI get port name: %s\n", phba->Port);
+ }
+
+out_free_mboxq:
+ if (rc != MBX_TIMEOUT) {
+ if (bf_get(lpfc_mqe_command, &mboxq->u.mqe) == MBX_SLI4_CONFIG)
+ lpfc_sli4_mbox_cmd_free(phba, mboxq);
+ else
+ mempool_free(mboxq, phba->mbox_mem_pool);
+ }
+ return rc;
+}
+
+/**
* lpfc_sli4_arm_cqeq_intr - Arm sli-4 device completion and event queues
* @phba: pointer to lpfc hba data structure.
*
@@ -5754,6 +5923,17 @@ lpfc_sli4_hba_setup(struct lpfc_hba *phb
kfree(vpd);
goto out_free_mbox;
}
+
+ /*
+ * Retrieve sli4 device physical port name, failure of doing it
+ * is considered as non-fatal.
+ */
+ rc = lpfc_sli4_retrieve_pport_name(phba);
+ if (!rc)
+ lpfc_printf_log(phba, KERN_INFO, LOG_MBOX | LOG_SLI,
+ "3080 Successful retrieving SLI4 device "
+ "physical port name: %s.\n", phba->Port);
+
/*
* Evaluate the read rev and vpd data. Populate the driver
* state with the results. If this routine fails, the failure
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2011-10-11 1:37 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2011-10-11 1:33 [PATCH 3/6] lpfc 8.3.27: Change algorithm for getting physical port name James Smart
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.