From: Kumar Gala <galak@kernel.crashing.org>
To: linuxppc-dev@ozlabs.org
Subject: [RFC][PATCH 17/30] powerpc/85xx: Rework P2020RDB device tree
Date: Thu, 10 Nov 2011 10:14:00 -0600 [thread overview]
Message-ID: <1320941653-29797-18-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <1320941653-29797-17-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/p2020rdb.dts | 63 ++---
arch/powerpc/boot/dts/p2020rdb_camp_core0.dts | 141 +----------
arch/powerpc/boot/dts/p2020rdb_camp_core1.dts | 107 +--------
arch/powerpc/boot/dts/p2020si.dtsi | 355 -------------------------
4 files changed, 22 insertions(+), 644 deletions(-)
delete mode 100644 arch/powerpc/boot/dts/p2020si.dtsi
diff --git a/arch/powerpc/boot/dts/p2020rdb.dts b/arch/powerpc/boot/dts/p2020rdb.dts
index 1d7a05f..fd42712 100644
--- a/arch/powerpc/boot/dts/p2020rdb.dts
+++ b/arch/powerpc/boot/dts/p2020rdb.dts
@@ -9,7 +9,7 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "fsl/p2020si-pre.dtsi"
/ {
model = "fsl,P2020RDB";
@@ -29,7 +29,8 @@
device_type = "memory";
};
- localbus@ffe05000 {
+ lbc: localbus@ffe05000 {
+ reg = <0 0xffe05000 0 0x1000>;
/* NOR and NAND Flashes */
ranges = <0x0 0x0 0x0 0xef000000 0x01000000
@@ -140,7 +141,9 @@
};
- soc@ffe00000 {
+ soc: soc@ffe00000 {
+ ranges = <0x0 0x0 0xffe00000 0x100000>;
+
i2c@3000 {
rtc@68 {
compatible = "dallas,ds1339";
@@ -148,17 +151,13 @@
};
};
- spi@7000 {
-
- fsl_m25p80@0 {
+ spi@7000 {
+ flash@0 {
#address-cells = <1>;
#size-cells = <1>;
- compatible = "fsl,espi-flash";
+ compatible = "spansion,s25sl12801";
reg = <0>;
- linux,modalias = "fsl_m25p80";
- modal = "s25sl128b";
spi-max-frequency = <50000000>;
- mode = <0>;
partition@0 {
/* 512KB for u-boot Bootloader Image */
@@ -202,13 +201,11 @@
mdio@24520 {
phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
+ interrupts = <3 1 0 0>;
reg = <0x0>;
};
phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
+ interrupts = <3 1 0 0>;
reg = <0x1>;
};
};
@@ -224,11 +221,7 @@
status = "disabled";
};
- ptp_clock@24E00 {
- compatible = "fsl,etsec-ptp";
- reg = <0x24E00 0xB0>;
- interrupts = <68 2 69 2 70 2>;
- interrupt-parent = < &mpic >;
+ ptp_clock@24e00 {
fsl,tclk-period = <5>;
fsl,tmr-prsc = <200>;
fsl,tmr-add = <0xCCCCCCCD>;
@@ -252,29 +245,18 @@
phy-handle = <&phy1>;
phy-connection-type = "rgmii-id";
};
-
};
pci0: pcie@ffe08000 {
+ reg = <0 0xffe08000 0 0x1000>;
status = "disabled";
};
pci1: pcie@ffe09000 {
+ reg = <0 0xffe09000 0 0x1000>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
+ pcie@0 {
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -286,21 +268,10 @@
};
pci2: pcie@ffe0a000 {
+ reg = <0 0xffe0a000 0 0x1000>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -311,3 +282,5 @@
};
};
};
+
+/include/ "fsl/p2020si-post.dtsi"
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
index fc8dddd..66aac86 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core0.dts
@@ -14,28 +14,16 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "p2020rdb.dts"
/ {
model = "fsl,P2020RDB";
compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
- aliases {
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- serial0 = &serial0;
- pci0 = &pci0;
- };
-
cpus {
PowerPC,P2020@1 {
- status = "disabled";
+ status = "disabled";
};
-
- };
-
- memory {
- device_type = "memory";
};
localbus@ffe05000 {
@@ -43,115 +31,18 @@
};
soc@ffe00000 {
- i2c@3000 {
- rtc@68 {
- compatible = "dallas,ds1339";
- reg = <0x68>;
- };
- };
-
serial1: serial@4600 {
status = "disabled";
};
- spi@7000 {
-
- fsl_m25p80@0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,espi-flash";
- reg = <0>;
- linux,modalias = "fsl_m25p80";
- modal = "s25sl128b";
- spi-max-frequency = <50000000>;
- mode = <0>;
-
- partition@0 {
- /* 512KB for u-boot Bootloader Image */
- reg = <0x0 0x00080000>;
- label = "SPI (RO) U-Boot Image";
- read-only;
- };
-
- partition@80000 {
- /* 512KB for DTB Image */
- reg = <0x00080000 0x00080000>;
- label = "SPI (RO) DTB Image";
- read-only;
- };
-
- partition@100000 {
- /* 4MB for Linux Kernel Image */
- reg = <0x00100000 0x00400000>;
- label = "SPI (RO) Linux Kernel Image";
- read-only;
- };
-
- partition@500000 {
- /* 4MB for Compressed RFS Image */
- reg = <0x00500000 0x00400000>;
- label = "SPI (RO) Compressed RFS Image";
- read-only;
- };
-
- partition@900000 {
- /* 7MB for JFFS2 based RFS */
- reg = <0x00900000 0x00700000>;
- label = "SPI (RW) JFFS2 RFS";
- };
- };
- };
-
dma@c300 {
status = "disabled";
};
- usb@22000 {
- phy_type = "ulpi";
- };
-
- mdio@24520 {
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <3 1>;
- reg = <0x1>;
- };
- };
-
- mdio@25520 {
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
-
- mdio@26520 {
- status = "disabled";
- };
-
enet0: ethernet@24000 {
status = "disabled";
};
- enet1: ethernet@25000 {
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "sgmii";
-
- };
-
- enet2: ethernet@26000 {
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
- };
-
-
mpic: pic@40000 {
protected-sources = <
42 76 77 78 79 /* serial1 , dma2 */
@@ -164,40 +55,12 @@
msi@41600 {
status = "disabled";
};
-
-
};
pci0: pcie@ffe08000 {
status = "disabled";
};
- pci1: pcie@ffe09000 {
- ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
-
pci2: pcie@ffe0a000 {
status = "disabled";
};
diff --git a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
index 261c34b..9bd8ef4 100644
--- a/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
+++ b/arch/powerpc/boot/dts/p2020rdb_camp_core1.dts
@@ -15,28 +15,18 @@
* option) any later version.
*/
-/include/ "p2020si.dtsi"
+/include/ "p2020rdb.dts"
/ {
model = "fsl,P2020RDB";
compatible = "fsl,P2020RDB", "fsl,MPC85XXRDB-CAMP";
- aliases {
- ethernet0 = &enet0;
- serial0 = &serial1;
- pci1 = &pci1;
- };
-
cpus {
PowerPC,P2020@0 {
- status = "disabled";
+ status = "disabled";
};
};
- memory {
- device_type = "memory";
- };
-
localbus@ffe05000 {
status = "disabled";
};
@@ -70,55 +60,10 @@
status = "disabled";
};
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
gpio: gpio-controller@f000 {
status = "disabled";
};
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p2020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2,512K
- interrupt-parent = <&mpic>;
- };
-
dma@21300 {
status = "disabled";
};
@@ -139,12 +84,6 @@
status = "disabled";
};
- enet0: ethernet@24000 {
- fixed-link = <1 1 1000 0 0>;
- phy-connection-type = "rgmii-id";
-
- };
-
enet1: ethernet@25000 {
status = "disabled";
};
@@ -170,22 +109,6 @@
>;
};
- msi@41600 {
- compatible = "fsl,p2020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
global-utilities@e0000 { //global utilities block
status = "disabled";
};
@@ -199,30 +122,4 @@
pci1: pcie@ffe09000 {
status = "disabled";
};
-
- pci2: pcie@ffe0a000 {
- ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x100000>;
- };
- };
};
diff --git a/arch/powerpc/boot/dts/p2020si.dtsi b/arch/powerpc/boot/dts/p2020si.dtsi
deleted file mode 100644
index 37f7194..0000000
--- a/arch/powerpc/boot/dts/p2020si.dtsi
+++ /dev/null
@@ -1,355 +0,0 @@
-/*
- * P2020 Device Tree Source
- *
- * Copyright 2011 Freescale Semiconductor Inc.
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-/dts-v1/;
-/ {
- compatible = "fsl,P2020";
- #address-cells = <2>;
- #size-cells = <2>;
- interrupt-parent = <&mpic>;
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,P2020@0 {
- device_type = "cpu";
- reg = <0x0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,P2020@1 {
- device_type = "cpu";
- reg = <0x1>;
- next-level-cache = <&L2>;
- };
- };
-
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,p2020-elbc", "fsl,elbc", "simple-bus";
- reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2 0 0>;
- };
-
- soc@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "fsl,p2020-immr", "simple-bus";
- ranges = <0x0 0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,p2020-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2 0 0>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,p2020-memory-controller";
- reg = <0x2000 0x1000>;
- interrupts = <18 2 0 0>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2 0 0>;
- dfsrr;
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2 0 0>;
- };
-
- spi@7000 {
- cell-index = <0>;
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,espi";
- reg = <0x7000 0x1000>;
- interrupts = <59 0x2 0 0>;
- mode = "cpu";
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <76 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <77 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <78 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <79 2 0 0>;
- };
- };
-
- gpio: gpio-controller@f000 {
- #gpio-cells = <2>;
- compatible = "fsl,mpc8572-gpio";
- reg = <0xf000 0x100>;
- interrupts = <47 0x2 0 0>;
- gpio-controller;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,p2020-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2,512K
- interrupts = <16 2 0 0>;
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupts = <20 2 0 0>;
- };
- dma-channel@80 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupts = <21 2 0 0>;
- };
- dma-channel@100 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupts = <22 2 0 0>;
- };
- dma-channel@180 {
- compatible = "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupts = <23 2 0 0>;
- };
- };
-
- usb@22000 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl-usb2-dr";
- reg = <0x22000 0x1000>;
- interrupts = <28 0x2 0 0>;
- };
-
- mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
- };
-
- mdio@25520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x26520 0x20>;
- };
-
- mdio@26520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 0 0 30 2 0 0 34 2 0 0>;
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 0 0 36 2 0 0 40 2 0 0>;
-
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 0 0 32 2 0 0 33 2 0 0>;
-
- };
-
- sdhci@2e000 {
- compatible = "fsl,p2020-esdhc", "fsl,esdhc";
- reg = <0x2e000 0x1000>;
- interrupts = <72 0x2 0 0>;
- /* Filled in by U-Boot */
- clock-frequency = <0>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
- "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 0 0 58 2 0 0>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0xbfe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
-
- msi@41600 {
- compatible = "fsl,p2020-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0 0 0
- 0xe1 0 0 0
- 0xe2 0 0 0
- 0xe3 0 0 0
- 0xe4 0 0 0
- 0xe5 0 0 0
- 0xe6 0 0 0
- 0xe7 0 0 0>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,p2020-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
- };
-
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupts = <24 2 0 0>;
- };
-
- pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupts = <25 2 0 0>;
- };
-
- pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
- clock-frequency = <33333333>;
- interrupts = <26 2 0 0>;
- };
-};
--
1.7.3.4
next prev parent reply other threads:[~2011-11-10 16:14 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-10 16:13 [RFC][PATCH 00/30] Rework FSL MPC85xx/Pxxxx device trees Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 01/30] powerpc/85xx: Simplify P1020RDB CAMP dts using includes Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 02/30] powerpc/85xx: Rework PCI nodes on P1020RDB Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 03/30] powerpc/85xx: Update SPI binding to match binding spec for P1020RDB Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 04/30] powerpc/85xx: Update P1020 SEC3.3 node to match actual SoC HW Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 05/30] powerpc/85xx: Add ethernet magic packet property to P1020 device tree Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 06/30] powerpc/85xx: p1020si.dtsi update interrupt handling Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 07/30] powerpc/85xx: create dts components to build up an SoC Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC device tree Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 09/30] powerpc/85xx: Rework P1020RDB " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 10/30] powerpc/85xx: Add P1020RDB 36-bit address map " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 11/30] powerpc/85xx: Rework P1010RDB and P1010 " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 12/30] powerpc/85xx: Add RTC to P1010RDB " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 13/30] powerpc/85xx: Add crypto engine to P1010 SoC " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 14/30] powerpc/85xx: Add a P1010RDB 36-bit address map " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 16/30] powerpc/85xx: Rework P2020DS " Kumar Gala
2011-11-10 16:14 ` Kumar Gala [this message]
2011-11-10 16:14 ` [RFC][PATCH 18/30] powerpc/85xx: Rework P1021MDS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 19/30] powerpc/85xx: Rework MPC8572DS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 20/30] powerpc/85xx: Rework MPC8536DS device trees Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 21/30] powerpc/85xx: Rework MPC8544DS device tree Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 22/30] powerpc/85xx: Rework MPC8548CDS device trees Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 23/30] powerpc/85xx: Rework P4080DS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 24/30] powerpc/85xx: Rework P5020DS device tree Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 25/30] powerpc/85xx: Rework P3041DS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 26/30] powerpc/85xx: Rework P2041RDB " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 27/30] powerpc/85xx: Rework P3060QDS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 29/30] powerpc/85xx: Rework MPC8568MDS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 30/30] powerpc/85xx: Rework MPC8569MDS " Kumar Gala
2011-11-10 18:10 ` [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS " Scott Wood
2011-11-10 18:42 ` Kumar Gala
2011-11-10 18:55 ` Scott Wood
2011-11-10 20:24 ` Kumar Gala
2011-11-10 17:30 ` [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS " Tabi Timur-B04825
2011-11-10 18:50 ` Kumar Gala
2011-11-15 23:49 ` Tabi Timur-B04825
2011-11-16 21:47 ` Timur Tabi
2011-11-16 21:50 ` Kumar Gala
2011-11-10 18:05 ` [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC " Scott Wood
2011-11-10 18:46 ` Kumar Gala
2011-11-10 18:58 ` Scott Wood
2011-11-10 20:27 ` Kumar Gala
2011-11-11 15:29 ` Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1320941653-29797-18-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.