From: Kumar Gala <galak@kernel.crashing.org>
To: linuxppc-dev@ozlabs.org
Subject: [RFC][PATCH 19/30] powerpc/85xx: Rework MPC8572DS device tree
Date: Thu, 10 Nov 2011 10:14:02 -0600 [thread overview]
Message-ID: <1320941653-29797-20-git-send-email-galak@kernel.crashing.org> (raw)
In-Reply-To: <1320941653-29797-19-git-send-email-galak@kernel.crashing.org>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi | 196 ++++++
arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi | 70 +++
arch/powerpc/boot/dts/mpc8572ds.dts | 757 +-----------------------
arch/powerpc/boot/dts/mpc8572ds.dtsi | 397 +++++++++++++
arch/powerpc/boot/dts/mpc8572ds_36b.dts | 746 +-----------------------
arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts | 487 +--------------
arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts | 245 +++------
7 files changed, 788 insertions(+), 2110 deletions(-)
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
create mode 100644 arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
create mode 100644 arch/powerpc/boot/dts/mpc8572ds.dtsi
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
new file mode 100644
index 0000000..d44e25a
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572si-post.dtsi
@@ -0,0 +1,196 @@
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (post include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&lbc {
+ #address-cells = <2>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ interrupts = <19 2 0 0>;
+};
+
+/* controller at 0x8000 */
+&pci0 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <24 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <24 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x8 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x9 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0xa 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0xb 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0x9000 */
+&pci1 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <25 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <25 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x4 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x5 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x6 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x7 0x1 0x0 0x0
+ >;
+ };
+};
+
+/* controller at 0xa000 */
+&pci2 {
+ compatible = "fsl,mpc8548-pcie";
+ device_type = "pci";
+ #size-cells = <2>;
+ #address-cells = <3>;
+ bus-range = <0 255>;
+ clock-frequency = <33333333>;
+ interrupts = <26 2 0 0>;
+
+ pcie@0 {
+ reg = <0 0 0 0 0>;
+ #interrupt-cells = <1>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ device_type = "pci";
+ interrupts = <26 2 0 0>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <
+ /* IDSEL 0x0 */
+ 0000 0x0 0x0 0x1 &mpic 0x0 0x1 0x0 0x0
+ 0000 0x0 0x0 0x2 &mpic 0x1 0x1 0x0 0x0
+ 0000 0x0 0x0 0x3 &mpic 0x2 0x1 0x0 0x0
+ 0000 0x0 0x0 0x4 &mpic 0x3 0x1 0x0 0x0
+ >;
+ };
+};
+
+&soc {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ device_type = "soc";
+ compatible = "fsl,mpc8572-immr", "simple-bus";
+ bus-frequency = <0>; // Filled out by uboot.
+
+ ecm-law@0 {
+ compatible = "fsl,ecm-law";
+ reg = <0x0 0x1000>;
+ fsl,num-laws = <12>;
+ };
+
+ ecm@1000 {
+ compatible = "fsl,mpc8572-ecm", "fsl,ecm";
+ reg = <0x1000 0x1000>;
+ interrupts = <17 2 0 0>;
+ };
+
+ memory-controller@2000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x2000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+ memory-controller@6000 {
+ compatible = "fsl,mpc8572-memory-controller";
+ reg = <0x6000 0x1000>;
+ interrupts = <18 2 0 0>;
+ };
+
+/include/ "pq3-i2c-0.dtsi"
+/include/ "pq3-i2c-1.dtsi"
+/include/ "pq3-duart-0.dtsi"
+/include/ "pq3-dma-1.dtsi"
+/include/ "pq3-gpio-0.dtsi"
+ gpio-controller@f000 {
+ compatible = "fsl,mpc8572-gpio", "fsl,pq3-gpio";
+ };
+
+ L2: l2-cache-controller@20000 {
+ compatible = "fsl,mpc8572-l2-cache-controller";
+ reg = <0x20000 0x1000>;
+ cache-line-size = <32>; // 32 bytes
+ cache-size = <0x100000>; // L2,1M
+ interrupts = <16 2 0 0>;
+ };
+
+/include/ "pq3-dma-0.dtsi"
+/include/ "pq3-etsec1-0.dtsi"
+/include/ "pq3-etsec1-timer-0.dtsi"
+
+ ptp_clock@24e00 {
+ interrupts = <68 2 0 0 69 2 0 0 70 2 0 0 71 2 0 0>;
+ };
+
+/include/ "pq3-etsec1-1.dtsi"
+/include/ "pq3-etsec1-2.dtsi"
+/include/ "pq3-etsec1-3.dtsi"
+/include/ "pq3-sec3.0-0.dtsi"
+/include/ "pq3-mpic.dtsi"
+/include/ "pq3-mpic-timer-B.dtsi"
+
+ global-utilities@e0000 {
+ compatible = "fsl,mpc8572-guts";
+ reg = <0xe0000 0x1000>;
+ fsl,has-rstcr;
+ };
+};
diff --git a/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
new file mode 100644
index 0000000..ca18832
--- /dev/null
+++ b/arch/powerpc/boot/dts/fsl/mpc8572si-pre.dtsi
@@ -0,0 +1,70 @@
+/*
+ * MPC8572 Silicon/SoC Device Tree Source (pre include)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/dts-v1/;
+/ {
+ compatible = "fsl,MPC8572";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ interrupt-parent = <&mpic>;
+
+ aliases {
+ serial0 = &serial0;
+ serial1 = &serial1;
+ ethernet0 = &enet0;
+ ethernet1 = &enet1;
+ ethernet2 = &enet2;
+ ethernet3 = &enet3;
+ pci0 = &pci0;
+ pci1 = &pci1;
+ pci2 = &pci2;
+ };
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ PowerPC,8572@0 {
+ device_type = "cpu";
+ reg = <0x0>;
+ next-level-cache = <&L2>;
+ };
+
+ PowerPC,8572@1 {
+ device_type = "cpu";
+ reg = <0x1>;
+ next-level-cache = <&L2>;
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts
index f6c04d2..0c9f295 100644
--- a/arch/powerpc/boot/dts/mpc8572ds.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds.dts
@@ -9,67 +9,18 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8572si-pre.dtsi"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@ffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ board_lbc: lbc: localbus@ffe05000 {
reg = <0 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
0x1 0x0 0x0 0xe0000000 0x08000000
@@ -78,601 +29,17 @@
0x4 0x0 0x0 0xffa40000 0x00040000
0x5 0x0 0x0 0xffa80000 0x00040000
0x6 0x0 0x0 0xffac0000 0x00040000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- ramdisk@0 {
- reg = <0x0 0x03000000>;
- read-only;
- };
-
- diagnostic@3000000 {
- reg = <0x03000000 0x00e00000>;
- read-only;
- };
-
- dink@3e00000 {
- reg = <0x03e00000 0x00200000>;
- read-only;
- };
-
- kernel@4000000 {
- reg = <0x04000000 0x00400000>;
- read-only;
- };
-
- jffs2@4400000 {
- reg = <0x04400000 0x03b00000>;
- };
-
- dtb@7f00000 {
- reg = <0x07f00000 0x00080000>;
- read-only;
- };
-
- u-boot@7f80000 {
- reg = <0x07f80000 0x00080000>;
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- u-boot@0 {
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- jffs2@2000000 {
- reg = <0x02000000 0x10000000>;
- };
-
- ramdisk@12000000 {
- reg = <0x12000000 0x08000000>;
- read-only;
- };
-
- kernel@1a000000 {
- reg = <0x1a000000 0x04000000>;
- };
-
- dtb@1e000000 {
- reg = <0x1e000000 0x01000000>;
- read-only;
- };
-
- empty@1f000000 {
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- nand@4,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x4 0x0 0x40000>;
- };
-
- nand@5,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x5 0x0 0x40000>;
- };
-
- nand@6,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x6 0x0 0x40000>;
- };
};
- soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ board_soc: soc: soc8572@ffe00000 {
ranges = <0x0 0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x100000>; // L2, 1M
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- ptp_clock@24E00 {
- compatible = "fsl,etsec-ptp";
- reg = <0x24E00 0xB0>;
- interrupts = <68 2 69 2 70 2 71 2>;
- interrupt-parent = < &mpic >;
- fsl,tclk-period = <5>;
- fsl,tmr-prsc = <200>;
- fsl,tmr-add = <0xAAAAAAAB>;
- fsl,tmr-fiper1 = <0x3B9AC9FB>;
- fsl,tmr-fiper2 = <0x3B9AC9FB>;
- fsl,max-adj = <499999999>;
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi3>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
};
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
+ board_pci0: pci0: pcie@ffe08000 {
reg = <0 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0x80000000
0x2000000 0x0 0x80000000
0x0 0x20000000
@@ -680,99 +47,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
-
};
pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xa0000000
0x2000000 0x0 0xa0000000
0x0 0x20000000
@@ -784,31 +66,10 @@
};
pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xc0000000
0x2000000 0x0 0xc0000000
0x0 0x20000000
@@ -819,3 +80,11 @@
};
};
};
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds.dtsi b/arch/powerpc/boot/dts/mpc8572ds.dtsi
new file mode 100644
index 0000000..c3d4fac
--- /dev/null
+++ b/arch/powerpc/boot/dts/mpc8572ds.dtsi
@@ -0,0 +1,397 @@
+/*
+ * MPC8572DS Device Tree Source stub (no addresses or top-level ranges)
+ *
+ * Copyright 2011 Freescale Semiconductor Inc.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are met:
+ * * Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * * Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * * Neither the name of Freescale Semiconductor nor the
+ * names of its contributors may be used to endorse or promote products
+ * derived from this software without specific prior written permission.
+ *
+ *
+ * ALTERNATIVELY, this software may be distributed under the terms of the
+ * GNU General Public License ("GPL") as published by the Free Software
+ * Foundation, either version 2 of that License or (at your option) any
+ * later version.
+ *
+ * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
+ * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
+ * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
+ * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
+ * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+&board_lbc {
+ nor@0,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "cfi-flash";
+ reg = <0x0 0x0 0x8000000>;
+ bank-width = <2>;
+ device-width = <1>;
+
+ ramdisk@0 {
+ reg = <0x0 0x03000000>;
+ read-only;
+ };
+
+ diagnostic@3000000 {
+ reg = <0x03000000 0x00e00000>;
+ read-only;
+ };
+
+ dink@3e00000 {
+ reg = <0x03e00000 0x00200000>;
+ read-only;
+ };
+
+ kernel@4000000 {
+ reg = <0x04000000 0x00400000>;
+ read-only;
+ };
+
+ jffs2@4400000 {
+ reg = <0x04400000 0x03b00000>;
+ };
+
+ dtb@7f00000 {
+ reg = <0x07f00000 0x00080000>;
+ read-only;
+ };
+
+ u-boot@7f80000 {
+ reg = <0x07f80000 0x00080000>;
+ read-only;
+ };
+ };
+
+ nand@2,0 {
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x2 0x0 0x40000>;
+
+ u-boot@0 {
+ reg = <0x0 0x02000000>;
+ read-only;
+ };
+
+ jffs2@2000000 {
+ reg = <0x02000000 0x10000000>;
+ };
+
+ ramdisk@12000000 {
+ reg = <0x12000000 0x08000000>;
+ read-only;
+ };
+
+ kernel@1a000000 {
+ reg = <0x1a000000 0x04000000>;
+ };
+
+ dtb@1e000000 {
+ reg = <0x1e000000 0x01000000>;
+ read-only;
+ };
+
+ empty@1f000000 {
+ reg = <0x1f000000 0x21000000>;
+ };
+ };
+
+ nand@4,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x4 0x0 0x40000>;
+ };
+
+ nand@5,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x5 0x0 0x40000>;
+ };
+
+ nand@6,0 {
+ compatible = "fsl,mpc8572-fcm-nand",
+ "fsl,elbc-fcm-nand";
+ reg = <0x6 0x0 0x40000>;
+ };
+};
+
+&board_soc {
+ enet0: ethernet@24000 {
+ tbi-handle = <&tbi0>;
+ phy-handle = <&phy0>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@24520 {
+ phy0: ethernet-phy@0 {
+ interrupts = <10 1 0 0>;
+ reg = <0x0>;
+ };
+ phy1: ethernet-phy@1 {
+ interrupts = <10 1 0 0>;
+ reg = <0x1>;
+ };
+ phy2: ethernet-phy@2 {
+ interrupts = <10 1 0 0>;
+ reg = <0x2>;
+ };
+ phy3: ethernet-phy@3 {
+ interrupts = <10 1 0 0>;
+ reg = <0x3>;
+ };
+
+ tbi0: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ ptp_clock@24e00 {
+ fsl,tclk-period = <5>;
+ fsl,tmr-prsc = <200>;
+ fsl,tmr-add = <0xAAAAAAAB>;
+ fsl,tmr-fiper1 = <0x3B9AC9FB>;
+ fsl,tmr-fiper2 = <0x3B9AC9FB>;
+ fsl,max-adj = <499999999>;
+ };
+
+ enet1: ethernet@25000 {
+ tbi-handle = <&tbi1>;
+ phy-handle = <&phy1>;
+ phy-connection-type = "rgmii-id";
+
+ };
+
+ mdio@25520 {
+ tbi1: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet2: ethernet@26000 {
+ tbi-handle = <&tbi2>;
+ phy-handle = <&phy2>;
+ phy-connection-type = "rgmii-id";
+
+ };
+ mdio@26520 {
+ tbi2: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+
+ enet3: ethernet@27000 {
+ tbi-handle = <&tbi3>;
+ phy-handle = <&phy3>;
+ phy-connection-type = "rgmii-id";
+ };
+
+ mdio@27520 {
+ tbi3: tbi-phy@11 {
+ reg = <0x11>;
+ device_type = "tbi-phy";
+ };
+ };
+};
+
+&board_pci0 {
+ pcie@0 {
+ interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+ interrupt-map = <
+ /* IDSEL 0x11 func 0 - PCI slot 1 */
+ 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 1 - PCI slot 1 */
+ 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 2 - PCI slot 1 */
+ 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 3 - PCI slot 1 */
+ 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 4 - PCI slot 1 */
+ 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 5 - PCI slot 1 */
+ 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 6 - PCI slot 1 */
+ 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x11 func 7 - PCI slot 1 */
+ 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1 0 0
+ 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1 0 0
+ 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1 0 0
+ 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1 0 0
+
+ /* IDSEL 0x12 func 0 - PCI slot 2 */
+ 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 1 - PCI slot 2 */
+ 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 2 - PCI slot 2 */
+ 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 3 - PCI slot 2 */
+ 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 4 - PCI slot 2 */
+ 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 5 - PCI slot 2 */
+ 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 6 - PCI slot 2 */
+ 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ /* IDSEL 0x12 func 7 - PCI slot 2 */
+ 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1 0 0
+ 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1 0 0
+ 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1 0 0
+ 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1 0 0
+
+ // IDSEL 0x1c USB
+ 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
+ 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
+ 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
+ 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
+
+ // IDSEL 0x1d Audio
+ 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+ // IDSEL 0x1e Legacy
+ 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+ 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+ // IDSEL 0x1f IDE/SATA
+ 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+ 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+ >;
+
+
+ uli1575@0 {
+ reg = <0x0 0x0 0x0 0x0 0x0>;
+ #size-cells = <2>;
+ #address-cells = <3>;
+ ranges = <0x2000000 0x0 0x80000000
+ 0x2000000 0x0 0x80000000
+ 0x0 0x20000000
+
+ 0x1000000 0x0 0x0
+ 0x1000000 0x0 0x0
+ 0x0 0x10000>;
+ isa@1e {
+ device_type = "isa";
+ #interrupt-cells = <2>;
+ #size-cells = <1>;
+ #address-cells = <2>;
+ reg = <0xf000 0x0 0x0 0x0 0x0>;
+ ranges = <0x1 0x0 0x1000000 0x0 0x0
+ 0x1000>;
+ interrupt-parent = <&i8259>;
+
+ i8259: interrupt-controller@20 {
+ reg = <0x1 0x20 0x2
+ 0x1 0xa0 0x2
+ 0x1 0x4d0 0x2>;
+ interrupt-controller;
+ device_type = "interrupt-controller";
+ #address-cells = <0>;
+ #interrupt-cells = <2>;
+ compatible = "chrp,iic";
+ interrupts = <9 2 0 0>;
+ interrupt-parent = <&mpic>;
+ };
+
+ i8042@60 {
+ #size-cells = <0>;
+ #address-cells = <1>;
+ reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+ interrupts = <1 3 12 3>;
+ interrupt-parent =
+ <&i8259>;
+
+ keyboard@0 {
+ reg = <0x0>;
+ compatible = "pnpPNP,303";
+ };
+
+ mouse@1 {
+ reg = <0x1>;
+ compatible = "pnpPNP,f03";
+ };
+ };
+
+ rtc@70 {
+ compatible = "pnpPNP,b00";
+ reg = <0x1 0x70 0x2>;
+ };
+
+ gpio@400 {
+ reg = <0x1 0x400 0x80>;
+ };
+ };
+ };
+ };
+};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_36b.dts b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
index f6365db..6c3d0b3 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_36b.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_36b.dts
@@ -1,5 +1,5 @@
/*
- * MPC8572 DS Device Tree Source
+ * MPC8572DS Device Tree Source (36-bit address map)
*
* Copyright 2007-2009 Freescale Semiconductor Inc.
*
@@ -9,67 +9,18 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "fsl/mpc8572si-pre.dtsi"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS";
- #address-cells = <2>;
- #size-cells = <2>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- serial1 = &serial1;
- pci0 = &pci0;
- pci1 = &pci1;
- pci2 = &pci2;
- };
-
- cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
- PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
-
- PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
- };
- };
memory {
device_type = "memory";
};
- localbus@fffe05000 {
- #address-cells = <2>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-elbc", "fsl,elbc", "simple-bus";
+ board_lbc: lbc: localbus@fffe05000 {
reg = <0xf 0xffe05000 0 0x1000>;
- interrupts = <19 2>;
- interrupt-parent = <&mpic>;
ranges = <0x0 0x0 0xf 0xe8000000 0x08000000
0x1 0x0 0xf 0xe0000000 0x08000000
@@ -78,588 +29,17 @@
0x4 0x0 0xf 0xffa40000 0x00040000
0x5 0x0 0xf 0xffa80000 0x00040000
0x6 0x0 0xf 0xffac0000 0x00040000>;
-
- nor@0,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "cfi-flash";
- reg = <0x0 0x0 0x8000000>;
- bank-width = <2>;
- device-width = <1>;
-
- ramdisk@0 {
- reg = <0x0 0x03000000>;
- read-only;
- };
-
- diagnostic@3000000 {
- reg = <0x03000000 0x00e00000>;
- read-only;
- };
-
- dink@3e00000 {
- reg = <0x03e00000 0x00200000>;
- read-only;
- };
-
- kernel@4000000 {
- reg = <0x04000000 0x00400000>;
- read-only;
- };
-
- jffs2@4400000 {
- reg = <0x04400000 0x03b00000>;
- };
-
- dtb@7f00000 {
- reg = <0x07f00000 0x00080000>;
- read-only;
- };
-
- u-boot@7f80000 {
- reg = <0x07f80000 0x00080000>;
- read-only;
- };
- };
-
- nand@2,0 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x2 0x0 0x40000>;
-
- u-boot@0 {
- reg = <0x0 0x02000000>;
- read-only;
- };
-
- jffs2@2000000 {
- reg = <0x02000000 0x10000000>;
- };
-
- ramdisk@12000000 {
- reg = <0x12000000 0x08000000>;
- read-only;
- };
-
- kernel@1a000000 {
- reg = <0x1a000000 0x04000000>;
- };
-
- dtb@1e000000 {
- reg = <0x1e000000 0x01000000>;
- read-only;
- };
-
- empty@1f000000 {
- reg = <0x1f000000 0x21000000>;
- };
- };
-
- nand@4,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x4 0x0 0x40000>;
- };
-
- nand@5,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x5 0x0 0x40000>;
- };
-
- nand@6,0 {
- compatible = "fsl,mpc8572-fcm-nand",
- "fsl,elbc-fcm-nand";
- reg = <0x6 0x0 0x40000>;
- };
};
- soc8572@fffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
+ board_soc: soc: soc8572@fffe00000 {
ranges = <0x0 0xf 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
- };
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
- };
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x100000>; // L2, 1M
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
- };
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
- };
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <1>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
- };
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
- };
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi0>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x3>;
- };
-
- tbi0: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet1: ethernet@25000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- ranges = <0x0 0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi1>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi1: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet2: ethernet@26000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- ranges = <0x0 0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi2>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi2: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- enet3: ethernet@27000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- ranges = <0x0 0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- tbi-handle = <&tbi3>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-tbi";
- reg = <0x520 0x20>;
-
- tbi3: tbi-phy@11 {
- reg = <0x11>;
- device_type = "tbi-phy";
- };
- };
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- serial1: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
- interrupts = <42 2>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0 0x100>;
- interrupts = <
- 0xe0 0
- 0xe1 0
- 0xe2 0
- 0xe3 0
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- };
};
- pci0: pcie@fffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
+ board_pci0: pci0: pcie@fffe08000 {
reg = <0xf 0xffe08000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x00000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc00000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -667,99 +47,14 @@
0x1000000 0x0 0x0
0x1000000 0x0 0x0
0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0xe0000000
- 0x2000000 0x0 0xe0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
};
-
};
pci1: pcie@fffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe09000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x20000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc10000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -771,31 +66,10 @@
};
pci2: pcie@fffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
reg = <0xf 0xffe0a000 0 0x1000>;
- bus-range = <0 255>;
ranges = <0x2000000 0x0 0xe0000000 0xc 0x40000000 0x0 0x20000000
0x1000000 0x0 0x00000000 0xf 0xffc20000 0x0 0x00010000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
ranges = <0x2000000 0x0 0xe0000000
0x2000000 0x0 0xe0000000
0x0 0x20000000
@@ -806,3 +80,11 @@
};
};
};
+
+/*
+ * mpc8572ds.dtsi must be last to ensure board_pci0 overrides pci0 settings
+ * for interrupt-map & interrupt-map-mask
+ */
+
+/include/ "fsl/mpc8572si-post.dtsi"
+/include/ "mpc8572ds.dtsi"
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
index 3375c2a..d34d127 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core0.dts
@@ -14,494 +14,69 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc8572ds.dts"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet0 = &enet0;
- ethernet1 = &enet1;
- serial0 = &serial0;
- pci0 = &pci0;
- pci1 = &pci1;
- };
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
PowerPC,8572@0 {
- device_type = "cpu";
- reg = <0x0>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
};
-
+ PowerPC,8572@1 {
+ status = "disabled";
+ };
};
- memory {
- device_type = "memory";
- reg = <0x0 0x0>; // Filled by U-Boot
+ localbus@ffe05000 {
+ status = "disabled";
};
soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- ecm-law@0 {
- compatible = "fsl,ecm-law";
- reg = <0x0 0x1000>;
- fsl,num-laws = <12>;
+ serial@4600 {
+ status = "disabled";
};
-
- ecm@1000 {
- compatible = "fsl,mpc8572-ecm", "fsl,ecm";
- reg = <0x1000 0x1000>;
- interrupts = <17 2>;
- interrupt-parent = <&mpic>;
+ dma@c300 {
+ status = "disabled";
};
-
- memory-controller@2000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x2000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
+ gpio-controller@f000 {
};
-
- memory-controller@6000 {
- compatible = "fsl,mpc8572-memory-controller";
- reg = <0x6000 0x1000>;
- interrupt-parent = <&mpic>;
- interrupts = <18 2>;
- };
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
+ l2-cache-controller@20000 {
cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
- interrupts = <16 2>;
};
-
- i2c@3000 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <0>;
- compatible = "fsl-i2c";
- reg = <0x3000 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ ethernet@26000 {
+ status = "disabled";
};
-
- i2c@3100 {
- #address-cells = <1>;
- #size-cells = <0>;
- cell-index = <1>;
- compatible = "fsl-i2c";
- reg = <0x3100 0x100>;
- interrupts = <43 2>;
- interrupt-parent = <&mpic>;
- dfsrr;
+ mdio@26520 {
+ status = "disabled";
};
-
- dma@21300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0x21300 0x4>;
- ranges = <0x0 0x21100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <20 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <21 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <22 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <23 2>;
- };
+ ethernet@27000 {
+ status = "disabled";
};
-
- enet0: ethernet@24000 {
- #address-cells = <1>;
- #size-cells = <1>;
- cell-index = <0>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x24000 0x1000>;
- ranges = <0x0 0x24000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <29 2 30 2 34 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy0>;
- phy-connection-type = "rgmii-id";
-
- mdio@520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x520 0x20>;
-
- phy0: ethernet-phy@0 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x0>;
- };
- phy1: ethernet-phy@1 {
- interrupt-parent = <&mpic>;
- interrupts = <10 1>;
- reg = <0x1>;
- };
- };
+ mdio@27520 {
+ status = "disabled";
};
-
- enet1: ethernet@25000 {
- cell-index = <1>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x25000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <35 2 36 2 40 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy1>;
- phy-connection-type = "rgmii-id";
- };
-
- serial0: serial@4500 {
- cell-index = <0>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4500 0x100>;
- clock-frequency = <0>;
+ pic@40000 {
+ protected-sources = <
+ 31 32 33 37 38 39 /* enet2 enet3 */
+ 76 77 78 79 26 42 /* dma2 pci2 serial*/
+ 0xe4 0xe5 0xe6 0xe7 /* msi */
+ >;
};
msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
msi-available-ranges = <0 0x80>;
interrupts = <
0xe0 0
0xe1 0
0xe2 0
0xe3 0>;
- interrupt-parent = <&mpic>;
- };
-
- global-utilities@e0000 { //global utilities block
- compatible = "fsl,mpc8572-guts";
- reg = <0xe0000 0x1000>;
- fsl,has-rstcr;
- };
-
- crypto@30000 {
- compatible = "fsl,sec3.0", "fsl,sec2.4", "fsl,sec2.2",
- "fsl,sec2.1", "fsl,sec2.0";
- reg = <0x30000 0x10000>;
- interrupts = <45 2 58 2>;
- interrupt-parent = <&mpic>;
- fsl,num-channels = <4>;
- fsl,channel-fifo-len = <24>;
- fsl,exec-units-mask = <0x9fe>;
- fsl,descriptor-types-mask = <0x3ab0ebf>;
- };
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
- protected-sources = <
- 31 32 33 37 38 39 /* enet2 enet3 */
- 76 77 78 79 26 42 /* dma2 pci2 serial*/
- 0xe4 0xe5 0xe6 0xe7 /* msi */
- >;
};
- };
-
- pci0: pcie@ffe08000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe08000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0x80000000 0x80000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc00000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <24 2>;
- interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x11 func 0 - PCI slot 1 */
- 0x8800 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8800 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8800 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8800 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 1 - PCI slot 1 */
- 0x8900 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8900 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8900 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8900 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 2 - PCI slot 1 */
- 0x8a00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8a00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8a00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8a00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 3 - PCI slot 1 */
- 0x8b00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8b00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8b00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8b00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 4 - PCI slot 1 */
- 0x8c00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8c00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8c00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8c00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 5 - PCI slot 1 */
- 0x8d00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8d00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8d00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8d00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 6 - PCI slot 1 */
- 0x8e00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8e00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8e00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8e00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x11 func 7 - PCI slot 1 */
- 0x8f00 0x0 0x0 0x1 &mpic 0x2 0x1
- 0x8f00 0x0 0x0 0x2 &mpic 0x3 0x1
- 0x8f00 0x0 0x0 0x3 &mpic 0x4 0x1
- 0x8f00 0x0 0x0 0x4 &mpic 0x1 0x1
-
- /* IDSEL 0x12 func 0 - PCI slot 2 */
- 0x9000 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9000 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9000 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9000 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 1 - PCI slot 2 */
- 0x9100 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9100 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9100 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9100 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 2 - PCI slot 2 */
- 0x9200 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9200 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9200 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9200 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 3 - PCI slot 2 */
- 0x9300 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9300 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9300 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9300 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 4 - PCI slot 2 */
- 0x9400 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9400 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9400 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9400 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 5 - PCI slot 2 */
- 0x9500 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9500 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9500 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9500 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 6 - PCI slot 2 */
- 0x9600 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9600 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9600 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9600 0x0 0x0 0x4 &mpic 0x2 0x1
-
- /* IDSEL 0x12 func 7 - PCI slot 2 */
- 0x9700 0x0 0x0 0x1 &mpic 0x3 0x1
- 0x9700 0x0 0x0 0x2 &mpic 0x4 0x1
- 0x9700 0x0 0x0 0x3 &mpic 0x1 0x1
- 0x9700 0x0 0x0 0x4 &mpic 0x2 0x1
-
- // IDSEL 0x1c USB
- 0xe000 0x0 0x0 0x1 &i8259 0xc 0x2
- 0xe100 0x0 0x0 0x2 &i8259 0x9 0x2
- 0xe200 0x0 0x0 0x3 &i8259 0xa 0x2
- 0xe300 0x0 0x0 0x4 &i8259 0xb 0x2
-
- // IDSEL 0x1d Audio
- 0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
-
- // IDSEL 0x1e Legacy
- 0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
- 0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
-
- // IDSEL 0x1f IDE/SATA
- 0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
- 0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
-
- >;
-
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- uli1575@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- ranges = <0x2000000 0x0 0x80000000
- 0x2000000 0x0 0x80000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- isa@1e {
- device_type = "isa";
- #interrupt-cells = <2>;
- #size-cells = <1>;
- #address-cells = <2>;
- reg = <0xf000 0x0 0x0 0x0 0x0>;
- ranges = <0x1 0x0 0x1000000 0x0 0x0
- 0x1000>;
- interrupt-parent = <&i8259>;
-
- i8259: interrupt-controller@20 {
- reg = <0x1 0x20 0x2
- 0x1 0xa0 0x2
- 0x1 0x4d0 0x2>;
- interrupt-controller;
- device_type = "interrupt-controller";
- #address-cells = <0>;
- #interrupt-cells = <2>;
- compatible = "chrp,iic";
- interrupts = <9 2>;
- interrupt-parent = <&mpic>;
- };
-
- i8042@60 {
- #size-cells = <0>;
- #address-cells = <1>;
- reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
- interrupts = <1 3 12 3>;
- interrupt-parent =
- <&i8259>;
-
- keyboard@0 {
- reg = <0x0>;
- compatible = "pnpPNP,303";
- };
-
- mouse@1 {
- reg = <0x1>;
- compatible = "pnpPNP,f03";
- };
- };
-
- rtc@70 {
- compatible = "pnpPNP,b00";
- reg = <0x1 0x70 0x2>;
- };
-
- gpio@400 {
- reg = <0x1 0x400 0x80>;
- };
- };
- };
+ timer@42100 {
+ status = "disabled";
};
-
};
-
- pci1: pcie@ffe09000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe09000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xa0000000 0xa0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc10000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <25 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x4 0x1
- 0000 0x0 0x0 0x2 &mpic 0x5 0x1
- 0000 0x0 0x0 0x3 &mpic 0x6 0x1
- 0000 0x0 0x0 0x4 &mpic 0x7 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xa0000000
- 0x2000000 0x0 0xa0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
- };
+ pcie@ffe0a000 {
+ status = "disabled";
};
};
diff --git a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
index e7b477f..d6a8faf 100644
--- a/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
+++ b/arch/powerpc/boot/dts/mpc8572ds_camp_core1.dts
@@ -15,169 +15,74 @@
* option) any later version.
*/
-/dts-v1/;
+/include/ "mpc8572ds.dts"
+
/ {
model = "fsl,MPC8572DS";
compatible = "fsl,MPC8572DS", "fsl,MPC8572DS-CAMP";
- #address-cells = <1>;
- #size-cells = <1>;
-
- aliases {
- ethernet2 = &enet2;
- ethernet3 = &enet3;
- serial0 = &serial0;
- pci2 = &pci2;
- };
cpus {
- #address-cells = <1>;
- #size-cells = <0>;
-
+ PowerPC,8572@0 {
+ status = "disabled";
+ };
PowerPC,8572@1 {
- device_type = "cpu";
- reg = <0x1>;
- d-cache-line-size = <32>; // 32 bytes
- i-cache-line-size = <32>; // 32 bytes
- d-cache-size = <0x8000>; // L1, 32K
- i-cache-size = <0x8000>; // L1, 32K
- timebase-frequency = <0>;
- bus-frequency = <0>;
- clock-frequency = <0>;
- next-level-cache = <&L2>;
};
};
- memory {
- device_type = "memory";
- reg = <0x0 0x0>; // Filled by U-Boot
+ localbus@ffe05000 {
+ status = "disabled";
};
soc8572@ffe00000 {
- #address-cells = <1>;
- #size-cells = <1>;
- device_type = "soc";
- compatible = "simple-bus";
- ranges = <0x0 0xffe00000 0x100000>;
- bus-frequency = <0>; // Filled out by uboot.
-
- L2: l2-cache-controller@20000 {
- compatible = "fsl,mpc8572-l2-cache-controller";
- reg = <0x20000 0x1000>;
- cache-line-size = <32>; // 32 bytes
- cache-size = <0x80000>; // L2, 512K
- interrupt-parent = <&mpic>;
+ ecm-law@0 {
+ status = "disabled";
};
-
- dma@c300 {
- #address-cells = <1>;
- #size-cells = <1>;
- compatible = "fsl,mpc8572-dma", "fsl,eloplus-dma";
- reg = <0xc300 0x4>;
- ranges = <0x0 0xc100 0x200>;
- cell-index = <0>;
- dma-channel@0 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x0 0x80>;
- cell-index = <0>;
- interrupt-parent = <&mpic>;
- interrupts = <76 2>;
- };
- dma-channel@80 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x80 0x80>;
- cell-index = <1>;
- interrupt-parent = <&mpic>;
- interrupts = <77 2>;
- };
- dma-channel@100 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x100 0x80>;
- cell-index = <2>;
- interrupt-parent = <&mpic>;
- interrupts = <78 2>;
- };
- dma-channel@180 {
- compatible = "fsl,mpc8572-dma-channel",
- "fsl,eloplus-dma-channel";
- reg = <0x180 0x80>;
- cell-index = <3>;
- interrupt-parent = <&mpic>;
- interrupts = <79 2>;
- };
+ ecm@1000 {
+ status = "disabled";
+ };
+ memory-controller@2000 {
+ status = "disabled";
+ };
+ memory-controller@6000 {
+ status = "disabled";
+ };
+ i2c@3000 {
+ status = "disabled";
+ };
+ i2c@3100 {
+ status = "disabled";
+ };
+ serial@4500 {
+ status = "disabled";
+ };
+ gpio-controller@f000 {
+ status = "disabled";
+ };
+ l2-cache-controller@20000 {
+ cache-size = <0x80000>; // L2, 512K
+ };
+ dma@21300 {
+ status = "disabled";
+ };
+ ethernet@24000 {
+ status = "disabled";
};
-
mdio@24520 {
- #address-cells = <1>;
- #size-cells = <0>;
- compatible = "fsl,gianfar-mdio";
- reg = <0x24520 0x20>;
-
- phy2: ethernet-phy@2 {
- interrupt-parent = <&mpic>;
- reg = <0x2>;
- };
- phy3: ethernet-phy@3 {
- interrupt-parent = <&mpic>;
- reg = <0x3>;
- };
+ status = "disabled";
};
-
- enet2: ethernet@26000 {
- cell-index = <2>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x26000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <31 2 32 2 33 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy2>;
- phy-connection-type = "rgmii-id";
+ ptp_clock@24e00 {
+ status = "disabled";
};
-
- enet3: ethernet@27000 {
- cell-index = <3>;
- device_type = "network";
- model = "eTSEC";
- compatible = "gianfar";
- reg = <0x27000 0x1000>;
- local-mac-address = [ 00 00 00 00 00 00 ];
- interrupts = <37 2 38 2 39 2>;
- interrupt-parent = <&mpic>;
- phy-handle = <&phy3>;
- phy-connection-type = "rgmii-id";
+ ethernet@25000 {
+ status = "disabled";
};
-
- msi@41600 {
- compatible = "fsl,mpc8572-msi", "fsl,mpic-msi";
- reg = <0x41600 0x80>;
- msi-available-ranges = <0x80 0x80>;
- interrupts = <
- 0xe4 0
- 0xe5 0
- 0xe6 0
- 0xe7 0>;
- interrupt-parent = <&mpic>;
+ mdio@25520 {
+ status = "disabled";
};
-
- serial0: serial@4600 {
- cell-index = <1>;
- device_type = "serial";
- compatible = "ns16550";
- reg = <0x4600 0x100>;
- clock-frequency = <0>;
+ crypto@30000 {
+ status = "disabled";
};
-
- mpic: pic@40000 {
- interrupt-controller;
- #address-cells = <0>;
- #interrupt-cells = <2>;
- reg = <0x40000 0x40000>;
- compatible = "chrp,open-pic";
- device_type = "open-pic";
+ pic@40000 {
protected-sources = <
18 16 10 42 45 58 /* MEM L2 mdio serial crypto */
29 30 34 35 36 40 /* enet0 enet1 */
@@ -189,41 +94,25 @@
0xe0 0xe1 0xe2 0xe3 /* msi */
>;
};
- };
-
- pci2: pcie@ffe0a000 {
- compatible = "fsl,mpc8548-pcie";
- device_type = "pci";
- #interrupt-cells = <1>;
- #size-cells = <2>;
- #address-cells = <3>;
- reg = <0xffe0a000 0x1000>;
- bus-range = <0 255>;
- ranges = <0x2000000 0x0 0xc0000000 0xc0000000 0x0 0x20000000
- 0x1000000 0x0 0x0 0xffc20000 0x0 0x10000>;
- clock-frequency = <33333333>;
- interrupt-parent = <&mpic>;
- interrupts = <26 2>;
- interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
- interrupt-map = <
- /* IDSEL 0x0 */
- 0000 0x0 0x0 0x1 &mpic 0x0 0x1
- 0000 0x0 0x0 0x2 &mpic 0x1 0x1
- 0000 0x0 0x0 0x3 &mpic 0x2 0x1
- 0000 0x0 0x0 0x4 &mpic 0x3 0x1
- >;
- pcie@0 {
- reg = <0x0 0x0 0x0 0x0 0x0>;
- #size-cells = <2>;
- #address-cells = <3>;
- device_type = "pci";
- ranges = <0x2000000 0x0 0xc0000000
- 0x2000000 0x0 0xc0000000
- 0x0 0x20000000
-
- 0x1000000 0x0 0x0
- 0x1000000 0x0 0x0
- 0x0 0x10000>;
+ timer@41100 {
+ status = "disabled";
};
+ msi@41600 {
+ msi-available-ranges = <0x80 0x80>;
+ interrupts = <
+ 0xe4 0
+ 0xe5 0
+ 0xe6 0
+ 0xe7 0>;
+ };
+ global-utilities@e0000 {
+ status = "disabled";
+ };
+ };
+ pcie@ffe08000 {
+ status = "disabled";
+ };
+ pcie@ffe09000 {
+ status = "disabled";
};
};
--
1.7.3.4
next prev parent reply other threads:[~2011-11-10 16:14 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-10 16:13 [RFC][PATCH 00/30] Rework FSL MPC85xx/Pxxxx device trees Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 01/30] powerpc/85xx: Simplify P1020RDB CAMP dts using includes Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 02/30] powerpc/85xx: Rework PCI nodes on P1020RDB Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 03/30] powerpc/85xx: Update SPI binding to match binding spec for P1020RDB Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 04/30] powerpc/85xx: Update P1020 SEC3.3 node to match actual SoC HW Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 05/30] powerpc/85xx: Add ethernet magic packet property to P1020 device tree Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 06/30] powerpc/85xx: p1020si.dtsi update interrupt handling Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 07/30] powerpc/85xx: create dts components to build up an SoC Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC device tree Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 09/30] powerpc/85xx: Rework P1020RDB " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 10/30] powerpc/85xx: Add P1020RDB 36-bit address map " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 11/30] powerpc/85xx: Rework P1010RDB and P1010 " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 12/30] powerpc/85xx: Add RTC to P1010RDB " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 13/30] powerpc/85xx: Add crypto engine to P1010 SoC " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 14/30] powerpc/85xx: Add a P1010RDB 36-bit address map " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS " Kumar Gala
2011-11-10 16:13 ` [RFC][PATCH 16/30] powerpc/85xx: Rework P2020DS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 17/30] powerpc/85xx: Rework P2020RDB " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 18/30] powerpc/85xx: Rework P1021MDS " Kumar Gala
2011-11-10 16:14 ` Kumar Gala [this message]
2011-11-10 16:14 ` [RFC][PATCH 20/30] powerpc/85xx: Rework MPC8536DS device trees Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 21/30] powerpc/85xx: Rework MPC8544DS device tree Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 22/30] powerpc/85xx: Rework MPC8548CDS device trees Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 23/30] powerpc/85xx: Rework P4080DS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 24/30] powerpc/85xx: Rework P5020DS device tree Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 25/30] powerpc/85xx: Rework P3041DS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 26/30] powerpc/85xx: Rework P2041RDB " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 27/30] powerpc/85xx: Rework P3060QDS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 29/30] powerpc/85xx: Rework MPC8568MDS " Kumar Gala
2011-11-10 16:14 ` [RFC][PATCH 30/30] powerpc/85xx: Rework MPC8569MDS " Kumar Gala
2011-11-10 18:10 ` [RFC][PATCH 28/30] powerpc/85xx: Rework P1023RDS " Scott Wood
2011-11-10 18:42 ` Kumar Gala
2011-11-10 18:55 ` Scott Wood
2011-11-10 20:24 ` Kumar Gala
2011-11-10 17:30 ` [RFC][PATCH 15/30] powerpc/85xx: Rework P1022DS " Tabi Timur-B04825
2011-11-10 18:50 ` Kumar Gala
2011-11-15 23:49 ` Tabi Timur-B04825
2011-11-16 21:47 ` Timur Tabi
2011-11-16 21:50 ` Kumar Gala
2011-11-10 18:05 ` [RFC][PATCH 08/30] powerpc/85xx: Rework P1020 SoC " Scott Wood
2011-11-10 18:46 ` Kumar Gala
2011-11-10 18:58 ` Scott Wood
2011-11-10 20:27 ` Kumar Gala
2011-11-11 15:29 ` Scott Wood
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1320941653-29797-20-git-send-email-galak@kernel.crashing.org \
--to=galak@kernel.crashing.org \
--cc=linuxppc-dev@ozlabs.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.