From: Mike Galbraith <mgalbraith@suse.de>
To: Peter Zijlstra <peterz@infradead.org>
Cc: Suresh Siddha <suresh.b.siddha@intel.com>,
linux-kernel <linux-kernel@vger.kernel.org>,
Ingo Molnar <mingo@elte.hu>, Paul Turner <pjt@google.com>
Subject: [patch 7/7] sched: only use TTWU_QUEUE when waker/wakee CPUs do not share top level cache
Date: Tue, 22 Nov 2011 15:26:25 +0100 [thread overview]
Message-ID: <1321971985.6855.26.camel@marge.simson.net> (raw)
In-Reply-To: <1321971445.6855.14.camel@marge.simson.net>
TTWU_QUEUE IPI overhead was measured to be as much as 13% of netperf TCP_RR
overhead when waking to a shared cache. Don't IPI unless we're waking cross
cache, where it can be a winner.
Suggested by Peterz, tested by /me.
Signed-off-by: Mike Galbraith <efault@gmx.de>
---
kernel/sched/core.c | 24 +++++++++++++++++++++++-
1 file changed, 23 insertions(+), 1 deletion(-)
Index: linux-3.0-tip/kernel/sched/core.c
===================================================================
--- linux-3.0-tip.orig/kernel/sched/core.c
+++ linux-3.0-tip/kernel/sched/core.c
@@ -1479,12 +1479,34 @@ static int ttwu_activate_remote(struct t
#endif /* __ARCH_WANT_INTERRUPTS_ON_CTXSW */
#endif /* CONFIG_SMP */
+static int ttwu_share_cache(int this_cpu, int cpu)
+{
+#ifndef CONFIG_X86
+ struct sched_domain *sd;
+ int ret = 0;
+
+ rcu_read_lock();
+ for_each_domain(this_cpu, sd) {
+ if (!cpumask_test_cpu(cpu, sched_domain_span(sd)))
+ continue;
+
+ ret = (sd->flags & SD_SHARE_PKG_RESOURCES);
+ break;
+ }
+ rcu_read_unlock();
+
+ return ret;
+#else
+ return per_cpu(cpu_llc_id, this_cpu) == per_cpu(cpu_llc_id, cpu);
+#endif
+}
+
static void ttwu_queue(struct task_struct *p, int cpu)
{
struct rq *rq = cpu_rq(cpu);
#if defined(CONFIG_SMP)
- if (sched_feat(TTWU_QUEUE) && cpu != smp_processor_id()) {
+ if (sched_feat(TTWU_QUEUE) && !ttwu_share_cache(smp_processor_id(), cpu)) {
sched_clock_cpu(cpu); /* sync clocks x-cpu */
ttwu_queue_remote(p, cpu);
return;
next prev parent reply other threads:[~2011-11-22 14:29 UTC|newest]
Thread overview: 79+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-15 9:46 sched: Avoid SMT siblings in select_idle_sibling() if possible Peter Zijlstra
2011-11-16 1:14 ` Suresh Siddha
2011-11-16 9:24 ` Mike Galbraith
2011-11-16 18:37 ` Suresh Siddha
2011-11-17 1:59 ` Mike Galbraith
2011-11-17 15:38 ` Mike Galbraith
2011-11-17 15:56 ` Peter Zijlstra
2011-11-17 16:38 ` Mike Galbraith
2011-11-17 17:36 ` Suresh Siddha
2011-11-18 15:14 ` Mike Galbraith
2011-11-18 15:17 ` [patch 1/6] sched: use rt.nr_cpus_allowed to recover select_task_rq() cycles Mike Galbraith
2011-11-18 15:35 ` Peter Zijlstra
2011-11-18 17:34 ` Mike Galbraith
2011-11-22 14:17 ` Mike Galbraith
2011-11-22 14:18 ` [patch 1/7] " Mike Galbraith
2011-12-06 9:50 ` [tip:sched/core] sched: Use " tip-bot for Mike Galbraith
2011-11-22 14:20 ` [patch 2/7] sched: save some hrtick_start_fair cycles Mike Galbraith
2011-12-06 20:20 ` [tip:sched/core] sched: Save " tip-bot for Mike Galbraith
2011-11-22 14:21 ` [patch 3/7] sched: set skip_clock_update in yield_task_fair() Mike Galbraith
2011-11-23 11:53 ` Peter Zijlstra
2011-11-23 12:06 ` Mike Galbraith
2011-11-23 14:48 ` Peter Zijlstra
2011-11-24 3:50 ` Mike Galbraith
2011-11-24 10:12 ` Peter Zijlstra
2011-11-25 6:39 ` Mike Galbraith
2011-12-06 9:51 ` [tip:sched/core] sched: Set " tip-bot for Mike Galbraith
2011-11-22 14:22 ` [patch 4/7] sched: convert rq->avg_idle to rq->avg_event Mike Galbraith
2011-11-23 11:55 ` Peter Zijlstra
2011-11-23 12:09 ` Mike Galbraith
2011-11-23 12:27 ` Peter Zijlstra
2011-11-23 12:57 ` Mike Galbraith
2011-11-23 14:21 ` Mike Galbraith
2011-11-22 14:23 ` [patch 5/7] sched: ratelimit select_idle_sibling()for sync wakeups Mike Galbraith
2011-11-22 14:24 ` [patch 6/7] sched: use rq->avg_event to resurrect nohz ratelimiting Mike Galbraith
2011-11-23 11:57 ` Peter Zijlstra
2011-11-23 12:35 ` Mike Galbraith
2011-11-22 14:26 ` Mike Galbraith [this message]
2011-11-23 12:08 ` [patch 7/7] sched: only use TTWU_QUEUE when waker/wakee CPUs do not share top level cache Peter Zijlstra
2011-11-18 15:39 ` [patch 1/6] sched: use rt.nr_cpus_allowed to recover select_task_rq() cycles Hillf Danton
2011-11-18 15:18 ` [patch 2/6] sched: convert rq->avg_idle to rq->avg_event Mike Galbraith
2011-11-18 15:19 ` [patch 3/6] sched: use rq->avg_event to resurrect nohz ratelimiting Mike Galbraith
2011-11-18 15:36 ` Peter Zijlstra
2011-11-18 17:42 ` Mike Galbraith
2011-11-19 0:51 ` Van De Ven, Arjan
2011-11-19 4:15 ` Mike Galbraith
2011-11-18 15:20 ` [patch 4/6] sched: ratelimit select_idle_sibling()for sync wakeups Mike Galbraith
2011-11-18 15:22 ` [patch 5/6] sched: save some hrtick_start_fair cycles Mike Galbraith
2011-11-18 15:23 ` [patch 6/6] sched: set skip_clock_update in yield_task_fair() Mike Galbraith
2012-02-20 14:41 ` sched: Avoid SMT siblings in select_idle_sibling() if possible Peter Zijlstra
2012-02-20 15:03 ` Srivatsa Vaddagiri
2012-02-20 18:25 ` Mike Galbraith
2012-02-21 0:06 ` Srivatsa Vaddagiri
2012-02-21 6:37 ` Mike Galbraith
2012-02-21 8:09 ` Srivatsa Vaddagiri
2012-02-20 18:14 ` Mike Galbraith
2012-02-20 18:15 ` Peter Zijlstra
2012-02-20 19:07 ` Peter Zijlstra
2012-02-21 5:43 ` Mike Galbraith
2012-02-21 8:32 ` Srivatsa Vaddagiri
2012-02-21 9:21 ` Mike Galbraith
2012-02-21 10:37 ` Peter Zijlstra
2012-02-21 14:58 ` Srivatsa Vaddagiri
2012-02-23 10:49 ` Srivatsa Vaddagiri
2012-02-23 11:19 ` Ingo Molnar
2012-02-23 12:18 ` Srivatsa Vaddagiri
2012-02-23 11:20 ` Srivatsa Vaddagiri
2012-02-23 11:26 ` Ingo Molnar
2012-02-23 11:32 ` Srivatsa Vaddagiri
2012-02-23 16:17 ` Ingo Molnar
2012-02-23 11:21 ` Mike Galbraith
2012-02-25 6:54 ` Srivatsa Vaddagiri
2012-02-25 8:30 ` Mike Galbraith
2012-02-27 22:11 ` Suresh Siddha
2012-02-28 5:05 ` Mike Galbraith
2011-11-17 19:08 ` Suresh Siddha
2011-11-18 15:12 ` Peter Zijlstra
2011-11-18 15:26 ` Mike Galbraith
2011-12-06 9:49 ` [tip:sched/core] sched: Clean up domain traversal in select_idle_sibling() tip-bot for Suresh Siddha
2011-11-18 23:40 ` [tip:sched/core] sched: Avoid SMT siblings in select_idle_sibling() if possible tip-bot for Peter Zijlstra
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1321971985.6855.26.camel@marge.simson.net \
--to=mgalbraith@suse.de \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=peterz@infradead.org \
--cc=pjt@google.com \
--cc=suresh.b.siddha@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.