From: Srivatsa Vaddagiri <vatsa@linux.vnet.ibm.com>
To: Ingo Molnar <mingo@elte.hu>
Cc: Mike Galbraith <efault@gmx.de>,
Peter Zijlstra <peterz@infradead.org>,
Suresh Siddha <suresh.b.siddha@intel.com>,
linux-kernel <linux-kernel@vger.kernel.org>,
Paul Turner <pjt@google.com>
Subject: Re: sched: Avoid SMT siblings in select_idle_sibling() if possible
Date: Thu, 23 Feb 2012 17:48:25 +0530 [thread overview]
Message-ID: <20120223121825.GC8454@linux.vnet.ibm.com> (raw)
In-Reply-To: <20120223111929.GA23646@elte.hu>
* Ingo Molnar <mingo@elte.hu> [2012-02-23 12:19:29]:
> sysbench is one of the best ones punishing bad scheduler
> balancing mistakes.
Here are the sysbench oltp score on same machine i.e:
Machine : 2 Quad-core Intel X5570 CPU (H/T enabled)
Kernel : tip (HEAD at 6241cc8)
sysbench : 0.4.12
sysbench was run with 16 threads as:
./sysbench --num-threads=16 --max-requests=100000 --test=oltp --oltp-table-size=500000 --mysql-socket=/var/lib/mysql/mysql.sock --oltp-read-only --mysql-user=root --mysql-password=blah run
sysbench was run 5 times with fs-cache being purged before each run
(echo 3 > /proc/sys/vm/drop_caches).
Average of 5 runs alongwith % std. dev. is noted for various OLTP stats
SD_BALANCE_WAKE SD_BALANCE_WAKE
disabled enabled
transactions (per sec) 4833.826 (+- 0.75%) 4837.354 (+- 1%)
read/write requests (per sec) 67673.580 (+- 0.75%) 67722.960 (+- 1%)
other ops (per sec) 9667.654 (+- 0.75%) 9674.710 (+- 1%)
There is minor improvement seen when SD_BALANCE_WAKE is enabled at SMT/MC
domains, but no degradation observed with it enabled.
- vatsa
next prev parent reply other threads:[~2012-02-23 12:18 UTC|newest]
Thread overview: 89+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-15 9:46 sched: Avoid SMT siblings in select_idle_sibling() if possible Peter Zijlstra
2011-11-16 1:14 ` Suresh Siddha
2011-11-16 9:24 ` Mike Galbraith
2011-11-16 18:37 ` Suresh Siddha
2011-11-17 1:59 ` Mike Galbraith
2011-11-17 15:38 ` Mike Galbraith
2011-11-17 15:56 ` Peter Zijlstra
2011-11-17 16:38 ` Mike Galbraith
2011-11-17 17:36 ` Suresh Siddha
2011-11-18 15:14 ` Mike Galbraith
2011-11-18 15:17 ` [patch 1/6] sched: use rt.nr_cpus_allowed to recover select_task_rq() cycles Mike Galbraith
2011-11-18 15:35 ` Peter Zijlstra
2011-11-18 17:34 ` Mike Galbraith
2011-11-22 14:17 ` Mike Galbraith
2011-11-22 14:18 ` [patch 1/7] " Mike Galbraith
2011-12-06 9:50 ` [tip:sched/core] sched: Use " tip-bot for Mike Galbraith
2011-11-22 14:20 ` [patch 2/7] sched: save some hrtick_start_fair cycles Mike Galbraith
2011-12-06 20:20 ` [tip:sched/core] sched: Save " tip-bot for Mike Galbraith
2011-11-22 14:21 ` [patch 3/7] sched: set skip_clock_update in yield_task_fair() Mike Galbraith
2011-11-23 11:53 ` Peter Zijlstra
2011-11-23 12:06 ` Mike Galbraith
2011-11-23 14:48 ` Peter Zijlstra
2011-11-24 3:50 ` Mike Galbraith
2011-11-24 10:12 ` Peter Zijlstra
2011-11-25 6:39 ` Mike Galbraith
2011-12-06 9:51 ` [tip:sched/core] sched: Set " tip-bot for Mike Galbraith
2011-11-22 14:22 ` [patch 4/7] sched: convert rq->avg_idle to rq->avg_event Mike Galbraith
2011-11-23 11:55 ` Peter Zijlstra
2011-11-23 12:09 ` Mike Galbraith
2011-11-23 12:27 ` Peter Zijlstra
2011-11-23 12:57 ` Mike Galbraith
2011-11-23 14:21 ` Mike Galbraith
2011-11-22 14:23 ` [patch 5/7] sched: ratelimit select_idle_sibling()for sync wakeups Mike Galbraith
2011-11-22 14:24 ` [patch 6/7] sched: use rq->avg_event to resurrect nohz ratelimiting Mike Galbraith
2011-11-23 11:57 ` Peter Zijlstra
2011-11-23 12:35 ` Mike Galbraith
2011-11-22 14:26 ` [patch 7/7] sched: only use TTWU_QUEUE when waker/wakee CPUs do not share top level cache Mike Galbraith
2011-11-23 12:08 ` Peter Zijlstra
2011-11-18 15:39 ` [patch 1/6] sched: use rt.nr_cpus_allowed to recover select_task_rq() cycles Hillf Danton
2011-11-18 15:18 ` [patch 2/6] sched: convert rq->avg_idle to rq->avg_event Mike Galbraith
2011-11-18 15:19 ` [patch 3/6] sched: use rq->avg_event to resurrect nohz ratelimiting Mike Galbraith
2011-11-18 15:36 ` Peter Zijlstra
2011-11-18 17:42 ` Mike Galbraith
2011-11-19 0:51 ` Van De Ven, Arjan
2011-11-19 4:15 ` Mike Galbraith
2011-11-18 15:20 ` [patch 4/6] sched: ratelimit select_idle_sibling()for sync wakeups Mike Galbraith
2011-11-18 15:22 ` [patch 5/6] sched: save some hrtick_start_fair cycles Mike Galbraith
2011-11-18 15:23 ` [patch 6/6] sched: set skip_clock_update in yield_task_fair() Mike Galbraith
2012-02-20 14:41 ` sched: Avoid SMT siblings in select_idle_sibling() if possible Peter Zijlstra
2012-02-20 15:03 ` Srivatsa Vaddagiri
2012-02-20 18:25 ` Mike Galbraith
2012-02-21 0:06 ` Srivatsa Vaddagiri
2012-02-21 6:37 ` Mike Galbraith
2012-02-21 8:09 ` Srivatsa Vaddagiri
2012-02-20 18:14 ` Mike Galbraith
2012-02-20 18:15 ` Peter Zijlstra
2012-02-20 19:07 ` Peter Zijlstra
2012-02-21 5:43 ` Mike Galbraith
2012-02-21 8:32 ` Srivatsa Vaddagiri
2012-02-21 9:21 ` Mike Galbraith
2012-02-21 10:37 ` Peter Zijlstra
2012-02-21 14:58 ` Srivatsa Vaddagiri
2012-02-23 10:49 ` Srivatsa Vaddagiri
2012-02-23 11:19 ` Ingo Molnar
2012-02-23 12:18 ` Srivatsa Vaddagiri [this message]
2012-02-23 11:20 ` Srivatsa Vaddagiri
2012-02-23 11:26 ` Ingo Molnar
2012-02-23 11:32 ` Srivatsa Vaddagiri
2012-02-23 16:17 ` Ingo Molnar
2012-02-23 11:21 ` Mike Galbraith
2012-02-25 6:54 ` Srivatsa Vaddagiri
2012-02-25 8:30 ` Mike Galbraith
2012-02-27 22:11 ` Suresh Siddha
2012-02-28 5:05 ` Mike Galbraith
2011-11-17 19:08 ` Suresh Siddha
2011-11-18 15:12 ` Peter Zijlstra
2011-11-18 15:26 ` Mike Galbraith
2011-12-06 9:49 ` [tip:sched/core] sched: Clean up domain traversal in select_idle_sibling() tip-bot for Suresh Siddha
2011-11-18 23:40 ` [tip:sched/core] sched: Avoid SMT siblings in select_idle_sibling() if possible tip-bot for Peter Zijlstra
[not found] <1329764866.2293.376.camhel@twins>
2012-03-05 15:24 ` Srivatsa Vaddagiri
2012-03-06 9:14 ` Ingo Molnar
2012-03-06 10:03 ` Srivatsa Vaddagiri
2012-03-22 15:32 ` Srivatsa Vaddagiri
2012-03-23 6:38 ` Mike Galbraith
2012-03-26 8:29 ` Peter Zijlstra
2012-03-26 8:36 ` Peter Zijlstra
2012-03-26 17:35 ` Srivatsa Vaddagiri
2012-03-26 18:06 ` Peter Zijlstra
2012-03-27 13:56 ` Mike Galbraith
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20120223121825.GC8454@linux.vnet.ibm.com \
--to=vatsa@linux.vnet.ibm.com \
--cc=efault@gmx.de \
--cc=linux-kernel@vger.kernel.org \
--cc=mingo@elte.hu \
--cc=peterz@infradead.org \
--cc=pjt@google.com \
--cc=suresh.b.siddha@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.