All of lore.kernel.org
 help / color / mirror / Atom feed
From: Malcolm Priestley <tvboxspy@gmail.com>
To: linux-media@vger.kernel.org
Subject: [PATCH] it913x add support for IT9135 9006 devices
Date: Mon, 12 Dec 2011 19:53:00 +0000	[thread overview]
Message-ID: <1323719580.2235.3.camel@tvbox> (raw)

Support for IT1935 9006 devices.

9006 have version 2 type chip.

9006 devices should use dvb-usb-it9135-02.fw firmware.

On the device tested the tuner id was set to 0 which meant
the driver used tuner id 0x38. The device functioned normally.

Signed-off-by: Malcolm Priestley <tvboxspy@gmail.com>
---
 drivers/media/dvb/dvb-usb/dvb-usb-ids.h |    1 +
 drivers/media/dvb/dvb-usb/it913x.c      |   17 +++++++++++++++--
 2 files changed, 16 insertions(+), 2 deletions(-)

diff --git a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
index 3cce13b..d390dda 100644
--- a/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
+++ b/drivers/media/dvb/dvb-usb/dvb-usb-ids.h
@@ -132,6 +132,7 @@
 #define USB_PID_INTEL_CE9500				0x9500
 #define USB_PID_ITETECH_IT9135				0x9135
 #define USB_PID_ITETECH_IT9135_9005			0x9005
+#define USB_PID_ITETECH_IT9135_9006			0x9006
 #define USB_PID_KWORLD_399U				0xe399
 #define USB_PID_KWORLD_399U_2				0xe400
 #define USB_PID_KWORLD_395U				0xe396
diff --git a/drivers/media/dvb/dvb-usb/it913x.c b/drivers/media/dvb/dvb-usb/it913x.c
index 3ddf82a..6f6072b 100644
--- a/drivers/media/dvb/dvb-usb/it913x.c
+++ b/drivers/media/dvb/dvb-usb/it913x.c
@@ -387,6 +387,7 @@ static int it913x_rc_query(struct dvb_usb_device *d)
 
 /* Firmware sets raw */
 const char fw_it9135_v1[] = "dvb-usb-it9135-01.fw";
+const char fw_it9135_v2[] = "dvb-usb-it9135-02.fw";
 const char fw_it9137[] = "dvb-usb-it9137-01.fw";
 
 static int ite_firmware_select(struct usb_device *udev,
@@ -400,6 +401,9 @@ static int ite_firmware_select(struct usb_device *udev,
 	else if (le16_to_cpu(udev->descriptor.idProduct) ==
 			USB_PID_ITETECH_IT9135_9005)
 		sw = IT9135_V1_FW;
+	else if (le16_to_cpu(udev->descriptor.idProduct) ==
+			USB_PID_ITETECH_IT9135_9006)
+		sw = IT9135_V2_FW;
 	else
 		sw = IT9137_FW;
 
@@ -413,6 +417,11 @@ static int ite_firmware_select(struct usb_device *udev,
 		it913x_config.adc_x2 = 1;
 		props->firmware = fw_it9135_v1;
 		break;
+	case IT9135_V2_FW:
+		it913x_config.firmware_ver = 1;
+		it913x_config.adc_x2 = 1;
+		props->firmware = fw_it9135_v2;
+		break;
 	case IT9137_FW:
 	default:
 		it913x_config.firmware_ver = 0;
@@ -701,6 +710,7 @@ static struct usb_device_id it913x_table[] = {
 	{ USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135) },
 	{ USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22_IT9137) },
 	{ USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9005) },
+	{ USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9006) },
 	{}		/* Terminating entry */
 };
 
@@ -776,7 +786,7 @@ static struct dvb_usb_device_properties it913x_properties = {
 		.rc_codes	= RC_MAP_MSI_DIGIVOX_III,
 	},
 	.i2c_algo         = &it913x_i2c_algo,
-	.num_device_descs = 4,
+	.num_device_descs = 5,
 	.devices = {
 		{   "Kworld UB499-2T T09(IT9137)",
 			{ &it913x_table[0], NULL },
@@ -790,6 +800,9 @@ static struct dvb_usb_device_properties it913x_properties = {
 		{   "ITE 9135(9005) Generic",
 			{ &it913x_table[3], NULL },
 			},
+		{   "ITE 9135(9006) Generic",
+			{ &it913x_table[4], NULL },
+			},
 	}
 };
 
@@ -823,5 +836,5 @@ module_exit(it913x_module_exit);
 
 MODULE_AUTHOR("Malcolm Priestley <tvboxspy@gmail.com>");
 MODULE_DESCRIPTION("it913x USB 2 Driver");
-MODULE_VERSION("1.14");
+MODULE_VERSION("1.17");
 MODULE_LICENSE("GPL");
-- 
1.7.7.3



             reply	other threads:[~2011-12-12 19:53 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-12-12 19:53 Malcolm Priestley [this message]
2011-12-14  6:13 ` [PATCH] it913x add support for IT9135 9006 devices Adeq
2011-12-14 21:20   ` Malcolm Priestley
2011-12-15 15:48   ` Adrian N
2011-12-15 16:42     ` Malcolm Priestley
2011-12-15 22:43       ` [PATCH] it913x changed firmware loader for chip version 2 types Malcolm Priestley
2011-12-24 12:43         ` Malcolm Priestley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1323719580.2235.3.camel@tvbox \
    --to=tvboxspy@gmail.com \
    --cc=linux-media@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.