From: Adrian N <adexmail@tlen.pl>
To: linux-media@vger.kernel.org
Subject: Re: [PATCH] it913x add support for IT9135 9006 devices
Date: Thu, 15 Dec 2011 16:48:10 +0100 [thread overview]
Message-ID: <4EEA16BA.4070209@tlen.pl> (raw)
In-Reply-To: <loom.20111214T071004-336@post.gmane.org>
W dniu 2011-12-14 07:13, Adeq pisze:
> Malcolm Priestley<tvboxspy<at> gmail.com> writes:
>
>> Support for IT1935 9006 devices.
>>
>> 9006 have version 2 type chip.
>>
>> 9006 devices should use dvb-usb-it9135-02.fw firmware.
>>
>> On the device tested the tuner id was set to 0 which meant
>> the driver used tuner id 0x38. The device functioned normally.
>>
> Hello,
>
> my device (048d:9006) isn't fully working, here is dmesg log:
>
> [code]
> [ 281.724044] usb 1-3: new high-speed USB device number 10 using ehci_hcd
> [ 281.860585] usb 1-3: New USB device found, idVendor=048d, idProduct=9006
> [ 281.860594] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 281.860601] usb 1-3: Product: DVB-T TV Stick
> [ 281.860607] usb 1-3: Manufacturer: ITE Technologies, Inc.
> [ 281.861694] it913x: Chip Version=02 Chip Type=9135
> [ 281.863193] it913x: Dual mode=0 Remote=1 Tuner Type=0
> [ 281.864444] dvb-usb: found a 'ITE 9135(9006) Generic' in cold state, will try
> to load a firmware
> [ 281.870053] dvb-usb: downloading firmware from file 'dvb-usb-it9135-02.fw'
> [ 281.870438] it913x: FRM Starting Firmware Download
> [ 282.388032] it913x: FRM Firmware Download Failed (ffffffff)
> [ 282.588116] it913x: Chip Version=79 Chip Type=4af3
> [ 283.224203] it913x: DEV it913x Error
> [ 283.227753] input: ITE Technologies, Inc. DVB-T TV Stick as
> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.1/input/input17
> [ 283.228415] generic-usb 0003:048D:9006.0007: input,hidraw0: USB HID v1.01
> Keyboard [ITE Technologies, Inc. DVB-T TV Stick] on usb-0000:00:1d.7-3/input1
>
> or
>
> [ 292.444049] usb 1-3: new high-speed USB device number 11 using ehci_hcd
> [ 292.580449] usb 1-3: New USB device found, idVendor=048d, idProduct=9006
> [ 292.580458] usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
> [ 292.580465] usb 1-3: Product: DVB-T TV Stick
> [ 292.580471] usb 1-3: Manufacturer: ITE Technologies, Inc.
> [ 292.581557] it913x: Chip Version=02 Chip Type=9135
> [ 292.583051] it913x: Dual mode=0 Remote=1 Tuner Type=0
> [ 292.584284] dvb-usb: found a 'ITE 9135(9006) Generic' in cold state, will try
> to load a firmware
> [ 292.589938] dvb-usb: downloading firmware from file 'dvb-usb-it9135-02.fw'
> [ 292.590302] it913x: FRM Starting Firmware Download
> [ 292.908023] it913x: FRM Firmware Download Completed - Resetting Device
> [ 292.908534] it913x: Chip Version=02 Chip Type=9135
> [ 292.909032] it913x: Firmware Version 52887808
> [ 293.144182] it913x: DEV it913x Error
> [ 293.147862] input: ITE Technologies, Inc. DVB-T TV Stick as
> /devices/pci0000:00/0000:00:1d.7/usb1/1-3/1-3:1.1/input/input18
> [ 293.152345] generic-usb 0003:048D:9006.0008: input,hidraw0: USB HID v1.01
> Keyboard [ITE Technologies, Inc. DVB-T TV Stick] on usb-0000:00:1d.7-3/input1
> [/code]
>
> I'm using this device: http://www.runteck.com/products_view.php?Id=24&S_Id=2
>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
After updating firmware.
warmboot:
[ 984.370447] dvb-usb: ITE 9135(9006) Generic successfully
deinitialized and disconnected.
[ 1000.884812] it913x: Chip Version=02 Chip Type=9135
[ 1000.885309] it913x: Firmware Version 52887808
[ 1000.886808] it913x: Dual mode=0 Remote=1 Tuner Type=0
[ 1000.886814] dvb-usb: found a 'ITE 9135(9006) Generic' in warm state.
[ 1000.887540] dvb-usb: will use the device's hardware PID filter (table
count: 31).
[ 1000.887857] DVB: registering new adapter (ITE 9135(9006) Generic)
[ 1000.891586] it913x-fe: ADF table value :00
[ 1000.891596] it913x: Message out (0000d8b401313938)
[ 1000.892197] it913x: Message out (0000d8b50100d8b4)
[ 1000.892685] it913x: Message out (0000d8b30100d8b5)
[ 1000.893185] it913x: Message out (0000f6413800d8b3)
[ 1000.893560] it913x: Message out (0000f5ca0100f641)
[ 1001.092205] it913x: Message out (0000f7150100f5ca)
[ 1001.292097] it913x: Message out (0000002500006000)
[ 1001.492099] it913x: Message out (0000f1cd0000a200)
[ 1001.692107] it913x: Message out (0000004501dc4cf5)
[ 1001.892111] it913x: Message out (0000002900000000)
[ 1002.092113] it913x-fe: Crystal Frequency :12000000 Adc Frequency
:20250000 ADC X2: 01
[ 1002.092141] dvb-usb: no frontend was attached by 'ITE 9135(9006) Generic'
[ 1002.092159] Registered IR keymap rc-msi-digivox-iii
[ 1002.092392] input: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc1/input15
[ 1002.095747] rc1: IR-receiver inside an USB DVB receiver as
/devices/pci0000:00/0000:00:1d.7/usb1/1-3/rc/rc1
[ 1002.095757] dvb-usb: schedule remote query interval to 250 msecs.
[ 1002.095765] dvb-usb: ITE 9135(9006) Generic successfully initialized
and connected.
[ 1002.095770] it913x: DEV registering device driver
[ 1002.095826] usbcore: registered new interface driver it913x
coldboot:
[ 1103.536156] it913x: Chip Version=ec Chip Type=5830
[ 1104.336178] it913x: Dual mode=92 Remote=92 Tuner Type=92
[ 1106.248116] dvb-usb: found a 'ITE 9135(9006) Generic' in cold state,
will try to load a firmware
[ 1106.253773] dvb-usb: downloading firmware from file
'dvb-usb-it9135-02.fw'
[ 1106.452123] it913x: FRM Starting Firmware Download
[ 1130.756039] it913x: FRM Firmware Download Failed (ffffff92)
[ 1130.956168] it913x: Chip Version=79 Chip Type=5823
[ 1131.592192] it913x: DEV it913x Error
[ 1131.592271] usbcore: registered new interface driver it913x
No frontend is generated anyway.
next prev parent reply other threads:[~2011-12-15 15:49 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-12 19:53 [PATCH] it913x add support for IT9135 9006 devices Malcolm Priestley
2011-12-14 6:13 ` Adeq
2011-12-14 21:20 ` Malcolm Priestley
2011-12-15 15:48 ` Adrian N [this message]
2011-12-15 16:42 ` Malcolm Priestley
2011-12-15 22:43 ` [PATCH] it913x changed firmware loader for chip version 2 types Malcolm Priestley
2011-12-24 12:43 ` Malcolm Priestley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=4EEA16BA.4070209@tlen.pl \
--to=adexmail@tlen.pl \
--cc=linux-media@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.