From: "Rafał Miłecki" <zajec5@gmail.com>
To: linux-wireless@vger.kernel.org,
"John W. Linville" <linville@tuxdriver.com>
Cc: b43-dev@lists.infradead.org, "Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH 8/8] b43: N-PHY: reorder functions: random clenaups
Date: Sat, 17 Dec 2011 13:57:27 +0100 [thread overview]
Message-ID: <1324126647-22425-9-git-send-email-zajec5@gmail.com> (raw)
In-Reply-To: <1324126647-22425-1-git-send-email-zajec5@gmail.com>
Signed-off-by: Rafa? Mi?ecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/phy_n.c | 223 ++++++++++++++++++++------------------
1 files changed, 116 insertions(+), 107 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 17440a9..e89b04b 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1929,7 +1929,7 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
}
/**************************************************
- * Others
+ * Tx and Rx
**************************************************/
void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna)
@@ -1946,17 +1946,6 @@ static enum b43_txpwr_result b43_nphy_op_recalc_txpower(struct b43_wldev *dev,
return B43_TXPWR_RES_DONE;
}
-static void b43_chantab_phy_upload(struct b43_wldev *dev,
- const struct b43_phy_n_sfo_cfg *e)
-{
- b43_phy_write(dev, B43_NPHY_BW1A, e->phy_bw1a);
- b43_phy_write(dev, B43_NPHY_BW2, e->phy_bw2);
- b43_phy_write(dev, B43_NPHY_BW3, e->phy_bw3);
- b43_phy_write(dev, B43_NPHY_BW4, e->phy_bw4);
- b43_phy_write(dev, B43_NPHY_BW5, e->phy_bw5);
- b43_phy_write(dev, B43_NPHY_BW6, e->phy_bw6);
-}
-
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrCtrlEnable */
static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable)
{
@@ -2249,18 +2238,6 @@ static void b43_nphy_tx_gain_table_upload(struct b43_wldev *dev)
}
}
-/*
- * Upload the N-PHY tables.
- * http://bcm-v4.sipsolutions.net/802.11/PHY/N/InitTables
- */
-static void b43_nphy_tables_init(struct b43_wldev *dev)
-{
- if (dev->phy.rev < 3)
- b43_nphy_rev0_1_2_tables_init(dev);
- else
- b43_nphy_rev3plus_tables_init(dev);
-}
-
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/PA%20override */
static void b43_nphy_pa_override(struct b43_wldev *dev, bool enable)
{
@@ -2313,20 +2290,6 @@ static void b43_nphy_tx_lp_fbw(struct b43_wldev *dev)
}
}
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MIMOConfig */
-static void b43_nphy_update_mimo_config(struct b43_wldev *dev, s32 preamble)
-{
- u16 mimocfg = b43_phy_read(dev, B43_NPHY_MIMOCFG);
-
- mimocfg |= B43_NPHY_MIMOCFG_AUTO;
- if (preamble == 1)
- mimocfg |= B43_NPHY_MIMOCFG_GFMIX;
- else
- mimocfg &= ~B43_NPHY_MIMOCFG_GFMIX;
-
- b43_phy_write(dev, B43_NPHY_MIMOCFG, mimocfg);
-}
-
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/Chains */
static void b43_nphy_update_txrx_chain(struct b43_wldev *dev)
{
@@ -2606,54 +2569,6 @@ static void b43_nphy_tx_iq_workaround(struct b43_wldev *dev)
b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_NPHY_TXIQW3, array[3]);
}
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/SuperSwitchInit */
-static void b43_nphy_superswitch_init(struct b43_wldev *dev, bool init)
-{
- if (dev->phy.rev >= 3) {
- if (!init)
- return;
- if (0 /* FIXME */) {
- b43_ntab_write(dev, B43_NTAB16(9, 2), 0x211);
- b43_ntab_write(dev, B43_NTAB16(9, 3), 0x222);
- b43_ntab_write(dev, B43_NTAB16(9, 8), 0x144);
- b43_ntab_write(dev, B43_NTAB16(9, 12), 0x188);
- }
- } else {
- b43_phy_write(dev, B43_NPHY_GPIO_LOOEN, 0);
- b43_phy_write(dev, B43_NPHY_GPIO_HIOEN, 0);
-
- switch (dev->dev->bus_type) {
-#ifdef CONFIG_B43_BCMA
- case B43_BUS_BCMA:
- bcma_chipco_gpio_control(&dev->dev->bdev->bus->drv_cc,
- 0xFC00, 0xFC00);
- break;
-#endif
-#ifdef CONFIG_B43_SSB
- case B43_BUS_SSB:
- ssb_chipco_gpio_control(&dev->dev->sdev->bus->chipco,
- 0xFC00, 0xFC00);
- break;
-#endif
- }
-
- b43_write32(dev, B43_MMIO_MACCTL,
- b43_read32(dev, B43_MMIO_MACCTL) &
- ~B43_MACCTL_GPOUTSMSK);
- b43_write16(dev, B43_MMIO_GPIO_MASK,
- b43_read16(dev, B43_MMIO_GPIO_MASK) | 0xFC00);
- b43_write16(dev, B43_MMIO_GPIO_CONTROL,
- b43_read16(dev, B43_MMIO_GPIO_CONTROL) & ~0xFC00);
-
- if (init) {
- b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO1, 0x2D8);
- b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP1, 0x301);
- b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO2, 0x2D8);
- b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2, 0x301);
- }
- }
-}
-
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/stop-playback */
static void b43_nphy_stop_playback(struct b43_wldev *dev)
{
@@ -2820,25 +2735,6 @@ static void b43_nphy_tx_pwr_ctrl_coef_setup(struct b43_wldev *dev)
b43_nphy_stay_in_carrier_search(dev, false);
}
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BPHYInit */
-static void b43_nphy_bphy_init(struct b43_wldev *dev)
-{
- unsigned int i;
- u16 val;
-
- val = 0x1E1F;
- for (i = 0; i < 16; i++) {
- b43_phy_write(dev, B43_PHY_N_BMODE(0x88 + i), val);
- val -= 0x202;
- }
- val = 0x3E3F;
- for (i = 0; i < 16; i++) {
- b43_phy_write(dev, B43_PHY_N_BMODE(0x98 + i), val);
- val -= 0x202;
- }
- b43_phy_write(dev, B43_PHY_N_BMODE(0x38), 0x668);
-}
-
/*
* Restore RSSI Calibration
* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreRssiCal
@@ -3865,10 +3761,104 @@ static void b43_nphy_set_rx_core_state(struct b43_wldev *dev, u8 mask)
b43_mac_enable(dev);
}
+/**************************************************
+ * N-PHY init
+ **************************************************/
+
/*
- * Init N-PHY
- * http://bcm-v4.sipsolutions.net/802.11/PHY/Init/N
+ * Upload the N-PHY tables.
+ * http://bcm-v4.sipsolutions.net/802.11/PHY/N/InitTables
*/
+static void b43_nphy_tables_init(struct b43_wldev *dev)
+{
+ if (dev->phy.rev < 3)
+ b43_nphy_rev0_1_2_tables_init(dev);
+ else
+ b43_nphy_rev3plus_tables_init(dev);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MIMOConfig */
+static void b43_nphy_update_mimo_config(struct b43_wldev *dev, s32 preamble)
+{
+ u16 mimocfg = b43_phy_read(dev, B43_NPHY_MIMOCFG);
+
+ mimocfg |= B43_NPHY_MIMOCFG_AUTO;
+ if (preamble == 1)
+ mimocfg |= B43_NPHY_MIMOCFG_GFMIX;
+ else
+ mimocfg &= ~B43_NPHY_MIMOCFG_GFMIX;
+
+ b43_phy_write(dev, B43_NPHY_MIMOCFG, mimocfg);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BPHYInit */
+static void b43_nphy_bphy_init(struct b43_wldev *dev)
+{
+ unsigned int i;
+ u16 val;
+
+ val = 0x1E1F;
+ for (i = 0; i < 16; i++) {
+ b43_phy_write(dev, B43_PHY_N_BMODE(0x88 + i), val);
+ val -= 0x202;
+ }
+ val = 0x3E3F;
+ for (i = 0; i < 16; i++) {
+ b43_phy_write(dev, B43_PHY_N_BMODE(0x98 + i), val);
+ val -= 0x202;
+ }
+ b43_phy_write(dev, B43_PHY_N_BMODE(0x38), 0x668);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/SuperSwitchInit */
+static void b43_nphy_superswitch_init(struct b43_wldev *dev, bool init)
+{
+ if (dev->phy.rev >= 3) {
+ if (!init)
+ return;
+ if (0 /* FIXME */) {
+ b43_ntab_write(dev, B43_NTAB16(9, 2), 0x211);
+ b43_ntab_write(dev, B43_NTAB16(9, 3), 0x222);
+ b43_ntab_write(dev, B43_NTAB16(9, 8), 0x144);
+ b43_ntab_write(dev, B43_NTAB16(9, 12), 0x188);
+ }
+ } else {
+ b43_phy_write(dev, B43_NPHY_GPIO_LOOEN, 0);
+ b43_phy_write(dev, B43_NPHY_GPIO_HIOEN, 0);
+
+ switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+ case B43_BUS_BCMA:
+ bcma_chipco_gpio_control(&dev->dev->bdev->bus->drv_cc,
+ 0xFC00, 0xFC00);
+ break;
+#endif
+#ifdef CONFIG_B43_SSB
+ case B43_BUS_SSB:
+ ssb_chipco_gpio_control(&dev->dev->sdev->bus->chipco,
+ 0xFC00, 0xFC00);
+ break;
+#endif
+ }
+
+ b43_write32(dev, B43_MMIO_MACCTL,
+ b43_read32(dev, B43_MMIO_MACCTL) &
+ ~B43_MACCTL_GPOUTSMSK);
+ b43_write16(dev, B43_MMIO_GPIO_MASK,
+ b43_read16(dev, B43_MMIO_GPIO_MASK) | 0xFC00);
+ b43_write16(dev, B43_MMIO_GPIO_CONTROL,
+ b43_read16(dev, B43_MMIO_GPIO_CONTROL) & ~0xFC00);
+
+ if (init) {
+ b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO1, 0x2D8);
+ b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP1, 0x301);
+ b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO2, 0x2D8);
+ b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2, 0x301);
+ }
+ }
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/Init/N */
int b43_phy_initn(struct b43_wldev *dev)
{
struct ssb_sprom *sprom = dev->dev->bus_sprom;
@@ -4063,6 +4053,21 @@ int b43_phy_initn(struct b43_wldev *dev)
return 0;
}
+/**************************************************
+ * Channel switching ops.
+ **************************************************/
+
+static void b43_chantab_phy_upload(struct b43_wldev *dev,
+ const struct b43_phy_n_sfo_cfg *e)
+{
+ b43_phy_write(dev, B43_NPHY_BW1A, e->phy_bw1a);
+ b43_phy_write(dev, B43_NPHY_BW2, e->phy_bw2);
+ b43_phy_write(dev, B43_NPHY_BW3, e->phy_bw3);
+ b43_phy_write(dev, B43_NPHY_BW4, e->phy_bw4);
+ b43_phy_write(dev, B43_NPHY_BW5, e->phy_bw5);
+ b43_phy_write(dev, B43_NPHY_BW6, e->phy_bw6);
+}
+
/* http://bcm-v4.sipsolutions.net/802.11/PmuSpurAvoid */
static void b43_nphy_pmu_spur_avoid(struct b43_wldev *dev, bool avoid)
{
@@ -4278,6 +4283,10 @@ static int b43_nphy_set_channel(struct b43_wldev *dev,
return 0;
}
+/**************************************************
+ * Basic PHY ops.
+ **************************************************/
+
static int b43_nphy_op_allocate(struct b43_wldev *dev)
{
struct b43_phy_n *nphy;
--
1.7.7
WARNING: multiple messages have this Message-ID (diff)
From: "Rafał Miłecki" <zajec5@gmail.com>
To: linux-wireless@vger.kernel.org,
"John W. Linville" <linville@tuxdriver.com>
Cc: b43-dev@lists.infradead.org, "Rafał Miłecki" <zajec5@gmail.com>
Subject: [PATCH 8/8] b43: N-PHY: reorder functions: random clenaups
Date: Sat, 17 Dec 2011 13:57:27 +0100 [thread overview]
Message-ID: <1324126647-22425-9-git-send-email-zajec5@gmail.com> (raw)
In-Reply-To: <1324126647-22425-1-git-send-email-zajec5@gmail.com>
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
---
drivers/net/wireless/b43/phy_n.c | 223 ++++++++++++++++++++------------------
1 files changed, 116 insertions(+), 107 deletions(-)
diff --git a/drivers/net/wireless/b43/phy_n.c b/drivers/net/wireless/b43/phy_n.c
index 17440a9..e89b04b 100644
--- a/drivers/net/wireless/b43/phy_n.c
+++ b/drivers/net/wireless/b43/phy_n.c
@@ -1929,7 +1929,7 @@ static void b43_nphy_workarounds(struct b43_wldev *dev)
}
/**************************************************
- * Others
+ * Tx and Rx
**************************************************/
void b43_nphy_set_rxantenna(struct b43_wldev *dev, int antenna)
@@ -1946,17 +1946,6 @@ static enum b43_txpwr_result b43_nphy_op_recalc_txpower(struct b43_wldev *dev,
return B43_TXPWR_RES_DONE;
}
-static void b43_chantab_phy_upload(struct b43_wldev *dev,
- const struct b43_phy_n_sfo_cfg *e)
-{
- b43_phy_write(dev, B43_NPHY_BW1A, e->phy_bw1a);
- b43_phy_write(dev, B43_NPHY_BW2, e->phy_bw2);
- b43_phy_write(dev, B43_NPHY_BW3, e->phy_bw3);
- b43_phy_write(dev, B43_NPHY_BW4, e->phy_bw4);
- b43_phy_write(dev, B43_NPHY_BW5, e->phy_bw5);
- b43_phy_write(dev, B43_NPHY_BW6, e->phy_bw6);
-}
-
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/TxPwrCtrlEnable */
static void b43_nphy_tx_power_ctrl(struct b43_wldev *dev, bool enable)
{
@@ -2249,18 +2238,6 @@ static void b43_nphy_tx_gain_table_upload(struct b43_wldev *dev)
}
}
-/*
- * Upload the N-PHY tables.
- * http://bcm-v4.sipsolutions.net/802.11/PHY/N/InitTables
- */
-static void b43_nphy_tables_init(struct b43_wldev *dev)
-{
- if (dev->phy.rev < 3)
- b43_nphy_rev0_1_2_tables_init(dev);
- else
- b43_nphy_rev3plus_tables_init(dev);
-}
-
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/PA%20override */
static void b43_nphy_pa_override(struct b43_wldev *dev, bool enable)
{
@@ -2313,20 +2290,6 @@ static void b43_nphy_tx_lp_fbw(struct b43_wldev *dev)
}
}
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MIMOConfig */
-static void b43_nphy_update_mimo_config(struct b43_wldev *dev, s32 preamble)
-{
- u16 mimocfg = b43_phy_read(dev, B43_NPHY_MIMOCFG);
-
- mimocfg |= B43_NPHY_MIMOCFG_AUTO;
- if (preamble == 1)
- mimocfg |= B43_NPHY_MIMOCFG_GFMIX;
- else
- mimocfg &= ~B43_NPHY_MIMOCFG_GFMIX;
-
- b43_phy_write(dev, B43_NPHY_MIMOCFG, mimocfg);
-}
-
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/Chains */
static void b43_nphy_update_txrx_chain(struct b43_wldev *dev)
{
@@ -2606,54 +2569,6 @@ static void b43_nphy_tx_iq_workaround(struct b43_wldev *dev)
b43_shm_write16(dev, B43_SHM_SHARED, B43_SHM_SH_NPHY_TXIQW3, array[3]);
}
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/SuperSwitchInit */
-static void b43_nphy_superswitch_init(struct b43_wldev *dev, bool init)
-{
- if (dev->phy.rev >= 3) {
- if (!init)
- return;
- if (0 /* FIXME */) {
- b43_ntab_write(dev, B43_NTAB16(9, 2), 0x211);
- b43_ntab_write(dev, B43_NTAB16(9, 3), 0x222);
- b43_ntab_write(dev, B43_NTAB16(9, 8), 0x144);
- b43_ntab_write(dev, B43_NTAB16(9, 12), 0x188);
- }
- } else {
- b43_phy_write(dev, B43_NPHY_GPIO_LOOEN, 0);
- b43_phy_write(dev, B43_NPHY_GPIO_HIOEN, 0);
-
- switch (dev->dev->bus_type) {
-#ifdef CONFIG_B43_BCMA
- case B43_BUS_BCMA:
- bcma_chipco_gpio_control(&dev->dev->bdev->bus->drv_cc,
- 0xFC00, 0xFC00);
- break;
-#endif
-#ifdef CONFIG_B43_SSB
- case B43_BUS_SSB:
- ssb_chipco_gpio_control(&dev->dev->sdev->bus->chipco,
- 0xFC00, 0xFC00);
- break;
-#endif
- }
-
- b43_write32(dev, B43_MMIO_MACCTL,
- b43_read32(dev, B43_MMIO_MACCTL) &
- ~B43_MACCTL_GPOUTSMSK);
- b43_write16(dev, B43_MMIO_GPIO_MASK,
- b43_read16(dev, B43_MMIO_GPIO_MASK) | 0xFC00);
- b43_write16(dev, B43_MMIO_GPIO_CONTROL,
- b43_read16(dev, B43_MMIO_GPIO_CONTROL) & ~0xFC00);
-
- if (init) {
- b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO1, 0x2D8);
- b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP1, 0x301);
- b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO2, 0x2D8);
- b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2, 0x301);
- }
- }
-}
-
/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/stop-playback */
static void b43_nphy_stop_playback(struct b43_wldev *dev)
{
@@ -2820,25 +2735,6 @@ static void b43_nphy_tx_pwr_ctrl_coef_setup(struct b43_wldev *dev)
b43_nphy_stay_in_carrier_search(dev, false);
}
-/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BPHYInit */
-static void b43_nphy_bphy_init(struct b43_wldev *dev)
-{
- unsigned int i;
- u16 val;
-
- val = 0x1E1F;
- for (i = 0; i < 16; i++) {
- b43_phy_write(dev, B43_PHY_N_BMODE(0x88 + i), val);
- val -= 0x202;
- }
- val = 0x3E3F;
- for (i = 0; i < 16; i++) {
- b43_phy_write(dev, B43_PHY_N_BMODE(0x98 + i), val);
- val -= 0x202;
- }
- b43_phy_write(dev, B43_PHY_N_BMODE(0x38), 0x668);
-}
-
/*
* Restore RSSI Calibration
* http://bcm-v4.sipsolutions.net/802.11/PHY/N/RestoreRssiCal
@@ -3865,10 +3761,104 @@ static void b43_nphy_set_rx_core_state(struct b43_wldev *dev, u8 mask)
b43_mac_enable(dev);
}
+/**************************************************
+ * N-PHY init
+ **************************************************/
+
/*
- * Init N-PHY
- * http://bcm-v4.sipsolutions.net/802.11/PHY/Init/N
+ * Upload the N-PHY tables.
+ * http://bcm-v4.sipsolutions.net/802.11/PHY/N/InitTables
*/
+static void b43_nphy_tables_init(struct b43_wldev *dev)
+{
+ if (dev->phy.rev < 3)
+ b43_nphy_rev0_1_2_tables_init(dev);
+ else
+ b43_nphy_rev3plus_tables_init(dev);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/MIMOConfig */
+static void b43_nphy_update_mimo_config(struct b43_wldev *dev, s32 preamble)
+{
+ u16 mimocfg = b43_phy_read(dev, B43_NPHY_MIMOCFG);
+
+ mimocfg |= B43_NPHY_MIMOCFG_AUTO;
+ if (preamble == 1)
+ mimocfg |= B43_NPHY_MIMOCFG_GFMIX;
+ else
+ mimocfg &= ~B43_NPHY_MIMOCFG_GFMIX;
+
+ b43_phy_write(dev, B43_NPHY_MIMOCFG, mimocfg);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/BPHYInit */
+static void b43_nphy_bphy_init(struct b43_wldev *dev)
+{
+ unsigned int i;
+ u16 val;
+
+ val = 0x1E1F;
+ for (i = 0; i < 16; i++) {
+ b43_phy_write(dev, B43_PHY_N_BMODE(0x88 + i), val);
+ val -= 0x202;
+ }
+ val = 0x3E3F;
+ for (i = 0; i < 16; i++) {
+ b43_phy_write(dev, B43_PHY_N_BMODE(0x98 + i), val);
+ val -= 0x202;
+ }
+ b43_phy_write(dev, B43_PHY_N_BMODE(0x38), 0x668);
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/N/SuperSwitchInit */
+static void b43_nphy_superswitch_init(struct b43_wldev *dev, bool init)
+{
+ if (dev->phy.rev >= 3) {
+ if (!init)
+ return;
+ if (0 /* FIXME */) {
+ b43_ntab_write(dev, B43_NTAB16(9, 2), 0x211);
+ b43_ntab_write(dev, B43_NTAB16(9, 3), 0x222);
+ b43_ntab_write(dev, B43_NTAB16(9, 8), 0x144);
+ b43_ntab_write(dev, B43_NTAB16(9, 12), 0x188);
+ }
+ } else {
+ b43_phy_write(dev, B43_NPHY_GPIO_LOOEN, 0);
+ b43_phy_write(dev, B43_NPHY_GPIO_HIOEN, 0);
+
+ switch (dev->dev->bus_type) {
+#ifdef CONFIG_B43_BCMA
+ case B43_BUS_BCMA:
+ bcma_chipco_gpio_control(&dev->dev->bdev->bus->drv_cc,
+ 0xFC00, 0xFC00);
+ break;
+#endif
+#ifdef CONFIG_B43_SSB
+ case B43_BUS_SSB:
+ ssb_chipco_gpio_control(&dev->dev->sdev->bus->chipco,
+ 0xFC00, 0xFC00);
+ break;
+#endif
+ }
+
+ b43_write32(dev, B43_MMIO_MACCTL,
+ b43_read32(dev, B43_MMIO_MACCTL) &
+ ~B43_MACCTL_GPOUTSMSK);
+ b43_write16(dev, B43_MMIO_GPIO_MASK,
+ b43_read16(dev, B43_MMIO_GPIO_MASK) | 0xFC00);
+ b43_write16(dev, B43_MMIO_GPIO_CONTROL,
+ b43_read16(dev, B43_MMIO_GPIO_CONTROL) & ~0xFC00);
+
+ if (init) {
+ b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO1, 0x2D8);
+ b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP1, 0x301);
+ b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_LO2, 0x2D8);
+ b43_phy_write(dev, B43_NPHY_RFCTL_LUT_TRSW_UP2, 0x301);
+ }
+ }
+}
+
+/* http://bcm-v4.sipsolutions.net/802.11/PHY/Init/N */
int b43_phy_initn(struct b43_wldev *dev)
{
struct ssb_sprom *sprom = dev->dev->bus_sprom;
@@ -4063,6 +4053,21 @@ int b43_phy_initn(struct b43_wldev *dev)
return 0;
}
+/**************************************************
+ * Channel switching ops.
+ **************************************************/
+
+static void b43_chantab_phy_upload(struct b43_wldev *dev,
+ const struct b43_phy_n_sfo_cfg *e)
+{
+ b43_phy_write(dev, B43_NPHY_BW1A, e->phy_bw1a);
+ b43_phy_write(dev, B43_NPHY_BW2, e->phy_bw2);
+ b43_phy_write(dev, B43_NPHY_BW3, e->phy_bw3);
+ b43_phy_write(dev, B43_NPHY_BW4, e->phy_bw4);
+ b43_phy_write(dev, B43_NPHY_BW5, e->phy_bw5);
+ b43_phy_write(dev, B43_NPHY_BW6, e->phy_bw6);
+}
+
/* http://bcm-v4.sipsolutions.net/802.11/PmuSpurAvoid */
static void b43_nphy_pmu_spur_avoid(struct b43_wldev *dev, bool avoid)
{
@@ -4278,6 +4283,10 @@ static int b43_nphy_set_channel(struct b43_wldev *dev,
return 0;
}
+/**************************************************
+ * Basic PHY ops.
+ **************************************************/
+
static int b43_nphy_op_allocate(struct b43_wldev *dev)
{
struct b43_phy_n *nphy;
--
1.7.7
next prev parent reply other threads:[~2011-12-17 12:57 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-17 12:57 [PATCH 0/8] b43: reoder functions in phy_n.c Rafał Miłecki
2011-12-17 12:57 ` Rafał Miłecki
2011-12-17 12:57 ` [PATCH 1/8] b43: N-PHY: reorder functions: put basic ones at beginning Rafał Miłecki
2011-12-17 12:57 ` Rafał Miłecki
2011-12-17 12:57 ` [PATCH 2/8] b43: N-PHY: reorder functions: collect radio ones Rafał Miłecki
2011-12-17 12:57 ` Rafał Miłecki
2011-12-17 12:57 ` [PATCH 3/8] b43: N-PHY: reorder functions: collect samples ones Rafał Miłecki
2011-12-17 12:57 ` Rafał Miłecki
2011-12-17 12:57 ` [PATCH 4/8] b43: N-PHY: reorder functions: collect RSSI selects Rafał Miłecki
2011-12-17 12:57 ` Rafał Miłecki
2011-12-17 12:57 ` [PATCH 5/8] b43: N-PHY: split gain control workarounds Rafał Miłecki
2011-12-17 12:57 ` Rafał Miłecki
2011-12-17 12:57 ` [PATCH 6/8] b43: N-PHY: reorder functions: move RSSI calibration Rafał Miłecki
2011-12-17 12:57 ` Rafał Miłecki
2011-12-17 12:57 ` [PATCH 7/8] b43: N-PHY: reorder functions: move rest of workarounds Rafał Miłecki
2011-12-17 12:57 ` Rafał Miłecki
2011-12-17 12:57 ` Rafał Miłecki [this message]
2011-12-17 12:57 ` [PATCH 8/8] b43: N-PHY: reorder functions: random clenaups Rafał Miłecki
2011-12-17 18:11 ` [PATCH 0/8] b43: reoder functions in phy_n.c Larry Finger
2011-12-17 18:11 ` Larry Finger
2011-12-17 18:32 ` Rafał Miłecki
2011-12-17 18:32 ` Rafał Miłecki
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1324126647-22425-9-git-send-email-zajec5@gmail.com \
--to=zajec5@gmail.com \
--cc=b43-dev@lists.infradead.org \
--cc=linux-wireless@vger.kernel.org \
--cc=linville@tuxdriver.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.