From: Ashish Jangam <ashish.jangam@kpitcummins.com>
To: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Cc: "linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
Dajun Chen <Dajun.Chen2@diasemi.com>
Subject: [PATCH 07/07] ONKEY: OnKey module for DA9052/53 PMIC v1
Date: Tue, 17 Jan 2012 18:59:11 +0530 [thread overview]
Message-ID: <1326806951.3542.342.camel@dhruva> (raw)
On-key Driver for Dialog Semiconductor DA9052 PMICs.
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
---
drivers/input/misc/Kconfig | 10 ++
drivers/input/misc/Makefile | 1 +
drivers/input/misc/da9052_onkey.c | 180 +++++++++++++++++++++++++++++++++++++
3 files changed, 191 insertions(+), 0 deletions(-)
create mode 100644 drivers/input/misc/da9052_onkey.c
diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
index 7b46781..c123fbe 100644
--- a/drivers/input/misc/Kconfig
+++ b/drivers/input/misc/Kconfig
@@ -455,6 +455,16 @@ config INPUT_RB532_BUTTON
To compile this driver as a module, choose M here: the
module will be called rb532_button.
+config INPUT_DA9052_ONKEY
+ tristate "Dialog DA9052 Onkey"
+ depends on PMIC_DA9052
+ help
+ Support the ONKEY of Dialog DA9052 PMICs as an input device
+ reporting power button status.
+
+ To compile this driver as a module, choose M here: the
+ module will be called da9052_onkey.
+
config INPUT_DM355EVM
tristate "TI DaVinci DM355 EVM Keypad and IR Remote"
depends on MFD_DM355EVM_MSP
diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
index 46671a8..a6d8de0 100644
--- a/drivers/input/misc/Makefile
+++ b/drivers/input/misc/Makefile
@@ -21,6 +21,7 @@ obj-$(CONFIG_INPUT_CM109) += cm109.o
obj-$(CONFIG_INPUT_CMA3000) += cma3000_d0x.o
obj-$(CONFIG_INPUT_CMA3000_I2C) += cma3000_d0x_i2c.o
obj-$(CONFIG_INPUT_COBALT_BTNS) += cobalt_btns.o
+obj-$(CONFIG_INPUT_DA9052_ONKEY) += da9052_onkey.o
obj-$(CONFIG_INPUT_DM355EVM) += dm355evm_keys.o
obj-$(CONFIG_INPUT_GP2A) += gp2ap002a00f.o
obj-$(CONFIG_INPUT_GPIO_TILT_POLLED) += gpio_tilt_polled.o
diff --git a/drivers/input/misc/da9052_onkey.c b/drivers/input/misc/da9052_onkey.c
new file mode 100644
index 0000000..9646c1e
--- /dev/null
+++ b/drivers/input/misc/da9052_onkey.c
@@ -0,0 +1,180 @@
+/*
+ * ON pin driver for Dialog DA9052 PMICs
+ *
+ * Copyright(c) 2011 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ */
+
+#include <linux/init.h>
+#include <linux/input.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/workqueue.h>
+
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/reg.h>
+
+struct da9052_onkey {
+ struct da9052 *da9052;
+ struct input_dev *input;
+ struct delayed_work work;
+ int irq;
+};
+
+static void da9052_onkey_query(struct da9052_onkey *onkey)
+{
+ int ret;
+
+ ret = da9052_reg_read(onkey->da9052, DA9052_EVENT_B_REG);
+ if (ret < 0) {
+ dev_err(onkey->da9052->dev,
+ "da9052_onkey_report_event da9052_reg_read error %d\n",
+ ret);
+ ret = 1;
+ } else {
+ ret = ret & DA9052_EVENTB_ENONKEY;
+ input_report_key(onkey->input, KEY_POWER, ret);
+ input_sync(onkey->input);
+ }
+
+ if (ret)
+ schedule_delayed_work(&onkey->work, msecs_to_jiffies(50));
+}
+
+static void da9052_onkey_work(struct work_struct *work)
+{
+ struct da9052_onkey *onkey = container_of(work, struct da9052_onkey,
+ work.work);
+
+ da9052_onkey_query(onkey);
+}
+
+static irqreturn_t da9052_onkey_irq(int irq, void *data)
+{
+ struct da9052_onkey *onkey = data;
+
+ da9052_onkey_work(&onkey->work.work);
+
+ return IRQ_HANDLED;
+}
+
+static int __devinit da9052_onkey_probe(struct platform_device *pdev)
+{
+ struct da9052_onkey *onkey;
+ int error;
+
+ onkey = kzalloc(sizeof(*onkey), GFP_KERNEL);
+ if (!onkey) {
+ dev_err(&pdev->dev, "Failed to allocate memory\n");
+ return -ENOMEM;
+ }
+
+ onkey->input = input_allocate_device();
+ if (!onkey->input) {
+ error = -ENOMEM;
+ dev_err(&pdev->dev, "Failed to allocate input device, %d\n",
+ error);
+ goto err_mem;
+ }
+
+ onkey->da9052 = dev_get_drvdata(pdev->dev.parent);
+ if (!onkey->da9052) {
+ error = -ENOMEM;
+ dev_err(&pdev->dev, "Failed to get the driver's data, %d\n",
+ error);
+ goto err_input;
+ }
+
+ onkey->irq = platform_get_irq_byname(pdev, "ONKEY");
+ if (onkey->irq < 0) {
+ error = -ENXIO;
+ dev_err(&pdev->dev,
+ "Failed to get an IRQ for input device, %d\n",
+ onkey->irq);
+ goto err_input;
+ }
+
+ onkey->input->evbit[0] = BIT_MASK(EV_KEY);
+ onkey->input->keybit[BIT_WORD(KEY_POWER)] = BIT_MASK(KEY_POWER);
+ onkey->input->name = "da9052-onkey";
+ onkey->input->phys = "da9052-onkey/input0";
+ onkey->input->dev.parent = &pdev->dev;
+
+ INIT_DELAYED_WORK(&onkey->work, da9052_onkey_work);
+
+ error = request_threaded_irq(onkey->da9052->irq_base + onkey->irq, NULL,
+ da9052_onkey_irq,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ "ONKEY", onkey);
+ if (error < 0) {
+ dev_err(onkey->da9052->dev,
+ "Failed to register ONKEY IRQ %d, error = %d\n",
+ onkey->da9052->irq_base + onkey->irq, error);
+ goto err_req_irq;
+ }
+
+ error = input_register_device(onkey->input);
+ if (error) {
+ dev_err(&pdev->dev, "Unable to register input device, %d\n",
+ error);
+ goto err_irq;
+ }
+
+ platform_set_drvdata(pdev, onkey);
+
+ return 0;
+
+err_irq:
+ free_irq(onkey->da9052->irq_base + onkey->irq, onkey);
+err_req_irq:
+ cancel_delayed_work_sync(&onkey->work);
+err_input:
+ input_free_device(onkey->input);
+err_mem:
+ kfree(onkey);
+ return error;
+}
+
+static int __devexit da9052_onkey_remove(struct platform_device *pdev)
+{
+ struct da9052_onkey *onkey = platform_get_drvdata(pdev);
+
+ free_irq(onkey->da9052->irq_base + onkey->irq, onkey);
+ cancel_delayed_work_sync(&onkey->work);
+ input_unregister_device(onkey->input);
+ kfree(onkey);
+
+ return 0;
+}
+
+static struct platform_driver da9052_onkey_driver = {
+ .probe = da9052_onkey_probe,
+ .remove = __devexit_p(da9052_onkey_remove),
+ .driver = {
+ .name = "da9052-onkey",
+ .owner = THIS_MODULE,
+ },
+};
+
+static int __init da9052_onkey_init(void)
+{
+ return platform_driver_register(&da9052_onkey_driver);
+}
+module_init(da9052_onkey_init);
+
+static void __exit da9052_onkey_exit(void)
+{
+ platform_driver_unregister(&da9052_onkey_driver);
+}
+module_exit(da9052_onkey_exit);
+
+MODULE_AUTHOR("David Dajun Chen <dchen@diasemi.com>");
+MODULE_DESCRIPTION("Onkey driver for DA9052");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:da9052-onkey");
next reply other threads:[~2012-01-17 13:33 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-01-17 13:29 Ashish Jangam [this message]
2012-01-17 19:55 ` [PATCH 07/07] ONKEY: OnKey module for DA9052/53 PMIC v1 Mark Brown
[not found] <C3AE124F08223B42BC95AEB82F0F6CED1FDDA3ED@KCHJEXMB02.kpit.com>
2012-02-01 8:28 ` Ashish Jangam
2012-02-01 9:50 ` Mark Brown
[not found] <C3AE124F08223B42BC95AEB82F0F6CED1FDDA575@KCHJEXMB02.kpit.com>
2012-02-03 13:24 ` Ashish Jangam
2012-02-03 13:52 ` Mark Brown
[not found] <C3AE124F08223B42BC95AEB82F0F6CED1FDDA5AA@KCHJEXMB02.kpit.com>
2012-02-06 8:02 ` Ashish Jangam
2012-02-06 11:19 ` Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1326806951.3542.342.camel@dhruva \
--to=ashish.jangam@kpitcummins.com \
--cc=Dajun.Chen2@diasemi.com \
--cc=dmitry.torokhov@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.