From: Ashish Jangam <ashish.jangam@kpitcummins.com>
To: Lars-Peter Clausen <lars@metafoo.de>
Cc: <rpurdie@rpsys.net>, <linux-kernel@vger.kernel.org>,
David Dajun Chen <Dajun.Chen@diasemi.com>
Subject: [PATCH] LEDS: LED module for DA9052/53 PMIC v2
Date: Wed, 22 Feb 2012 18:39:09 +0530 [thread overview]
Message-ID: <1329916149.24042.7.camel@dhruva> (raw)
LED Driver for Dialog Semiconductor DA9052/53 PMICs.
Signed-off-by: David Dajun Chen <dchen@diasemi.com>
Signed-off-by: Ashish Jangam <ashish.jangam@kpitcummins.com>
---
drivers/leds/Kconfig | 8 ++
drivers/leds/Makefile | 1 +
drivers/leds/leds-da9052.c | 214 ++++++++++++++++++++++++++++++++++++++++++++
3 files changed, 223 insertions(+), 0 deletions(-)
create mode 100644 drivers/leds/leds-da9052.c
diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig
index e2ac190..b826f88 100644
--- a/drivers/leds/Kconfig
+++ b/drivers/leds/Kconfig
@@ -266,6 +266,14 @@ config LEDS_DA903X
This option enables support for on-chip LED drivers found
on Dialog Semiconductor DA9030/DA9034 PMICs.
+config LEDS_DA9052
+ tristate "Dialog DA9052/DA9053 LEDS"
+ depends on LEDS_CLASS
+ depends on PMIC_DA9052
+ help
+ This option enables support for on-chip LED drivers found
+ on Dialog Semiconductor DA9052-BC and DA9053-AA/Bx PMICs.
+
config LEDS_DAC124S085
tristate "LED Support for DAC124S085 SPI DAC"
depends on LEDS_CLASS
diff --git a/drivers/leds/Makefile b/drivers/leds/Makefile
index fa0f428..479048f 100644
--- a/drivers/leds/Makefile
+++ b/drivers/leds/Makefile
@@ -32,6 +32,7 @@ obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o
obj-$(CONFIG_LEDS_PCA9633) += leds-pca9633.o
obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
+obj-$(CONFIG_LEDS_DA9052) += leds-da9052.o
obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
diff --git a/drivers/leds/leds-da9052.c b/drivers/leds/leds-da9052.c
new file mode 100644
index 0000000..15281b4
--- /dev/null
+++ b/drivers/leds/leds-da9052.c
@@ -0,0 +1,214 @@
+/*
+ * LED Driver for Dialog DA9052 PMICs.
+ *
+ * Copyright(c) 2012 Dialog Semiconductor Ltd.
+ *
+ * Author: David Dajun Chen <dchen@diasemi.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/leds.h>
+#include <linux/workqueue.h>
+#include <linux/slab.h>
+
+#include <linux/mfd/da9052/reg.h>
+#include <linux/mfd/da9052/da9052.h>
+#include <linux/mfd/da9052/pdata.h>
+
+#define DA9052_OPENDRAIN_OUTPUT 2
+#define DA9052_SET_HIGH_LVL_OUTPUT (1 << 3)
+#define DA9052_MASK_UPPER_NIBBLE 0xF0
+#define DA9052_MASK_LOWER_NIBBLE 0x0F
+#define DA9052_NIBBLE_SHIFT 4
+#define DA9052_MAX_BRIGHTNESS 0x5f
+
+struct da9052_led {
+ struct led_classdev cdev;
+ struct work_struct work;
+ struct da9052 *da9052;
+ unsigned char led_index;
+ unsigned char id;
+ int brightness;
+};
+
+unsigned char led_reg[] = {
+ DA9052_LED_CONT_4_REG,
+ DA9052_LED_CONT_5_REG,
+};
+
+static int da9052_set_led_brightness(struct da9052_led *led)
+{
+ u8 val;
+ int error;
+
+ val = (led->brightness & 0x7f) | DA9052_LED_CONT_DIM;
+
+ error = da9052_reg_write(led->da9052, led_reg[led->led_index], val);
+ if (error < 0)
+ dev_err(led->da9052->dev, "Failed to set led brightness, %d\n",
+ error);
+ return error;
+}
+
+static void da9052_led_work(struct work_struct *work)
+{
+ struct da9052_led *led = container_of(work, struct da9052_led, work);
+
+ da9052_set_led_brightness(led);
+}
+
+static void da9052_led_set(struct led_classdev *led_cdev,
+ enum led_brightness value)
+{
+ struct da9052_led *led;
+
+ led = container_of(led_cdev, struct da9052_led, cdev);
+ led->brightness = value;
+ schedule_work(&led->work);
+}
+
+static int da9052_configure_leds(struct da9052 *da9052)
+{
+ int error;
+ unsigned char register_value = DA9052_OPENDRAIN_OUTPUT
+ | DA9052_SET_HIGH_LVL_OUTPUT;
+
+ error = da9052_reg_update(da9052, DA9052_GPIO_14_15_REG,
+ DA9052_MASK_LOWER_NIBBLE,
+ register_value);
+
+ if (error < 0) {
+ dev_err(da9052->dev, "Failed to write GPIO 14-15 reg, %d\n",
+ error);
+ return error;
+ }
+
+ error = da9052_reg_update(da9052, DA9052_GPIO_14_15_REG,
+ DA9052_MASK_UPPER_NIBBLE,
+ register_value << DA9052_NIBBLE_SHIFT);
+ if (error < 0)
+ dev_err(da9052->dev, "Failed to write GPIO 14-15 reg, %d\n",
+ error);
+
+ return error;
+}
+
+static int __devinit da9052_led_probe(struct platform_device *pdev)
+{
+ struct da9052_pdata *pdata;
+ struct da9052 *da9052;
+ struct led_platform_data *pled;
+ struct da9052_led *led = NULL;
+ int error = -ENODEV;
+ int i;
+
+ da9052 = dev_get_drvdata(pdev->dev.parent);
+ pdata = da9052->dev->platform_data;
+ if (pdata == NULL) {
+ dev_err(&pdev->dev, "No platform data\n");
+ goto err;
+ }
+
+ pled = pdata->pled;
+ if (pled == NULL) {
+ dev_err(&pdev->dev, "No platform data for LED\n");
+ goto err;
+ }
+
+ led = devm_kzalloc(&pdev->dev,
+ sizeof(struct da9052_led) * pled->num_leds,
+ GFP_KERNEL);
+ if (led == NULL) {
+ dev_err(&pdev->dev, "Failed to alloc memory\n");
+ error = -ENOMEM;
+ goto err;
+ }
+
+ for (i = 0; i < pled->num_leds; i++) {
+ led[i].cdev.name = pled->leds[i].name;
+ led[i].cdev.brightness_set = da9052_led_set;
+ led[i].cdev.brightness = LED_OFF;
+ led[i].cdev.max_brightness = DA9052_MAX_BRIGHTNESS;
+ led[i].brightness = LED_OFF;
+ led[i].led_index = pled->leds[i].flags;
+ led[i].da9052 = dev_get_drvdata(pdev->dev.parent);
+ INIT_WORK(&led[i].work, da9052_led_work);
+
+ error = led_classdev_register(pdev->dev.parent, &led[i].cdev);
+ if (error) {
+ dev_err(&pdev->dev, "Failed to register led %d\n",
+ led[i].led_index);
+ goto err_register;
+ }
+
+ error = da9052_set_led_brightness(&led[i]);
+ if (error) {
+ dev_err(&pdev->dev, "Unable to init led %d\n",
+ led[i].led_index);
+ continue;
+ }
+ }
+ error = da9052_configure_leds(led->da9052);
+ if (error) {
+ dev_err(&pdev->dev, "Failed to configure GPIO LED%d\n", error);
+ goto err_register;
+ }
+
+ platform_set_drvdata(pdev, led);
+
+ return 0;
+
+err_register:
+ for (i = i - 1; i >= 0; i--) {
+ led_classdev_unregister(&led[i].cdev);
+ cancel_work_sync(&led[i].work);
+ }
+err:
+ return error;
+}
+
+static int __devexit da9052_led_remove(struct platform_device *pdev)
+{
+ struct da9052_led *led = platform_get_drvdata(pdev);
+ struct da9052_pdata *pdata;
+ struct da9052 *da9052;
+ struct led_platform_data *pled;
+ int i;
+
+ da9052 = dev_get_drvdata(pdev->dev.parent);
+ pdata = da9052->dev->platform_data;
+ pled = pdata->pled;
+
+ for (i = 0; i < pled->num_leds; i++) {
+ led[i].brightness = 0;
+ da9052_set_led_brightness(&led[i]);
+ led_classdev_unregister(&led[i].cdev);
+ cancel_work_sync(&led[i].work);
+ }
+
+ return 0;
+}
+
+static struct platform_driver da9052_led_driver = {
+ .driver = {
+ .name = "da9052-leds",
+ .owner = THIS_MODULE,
+ },
+ .probe = da9052_led_probe,
+ .remove = __devexit_p(da9052_led_remove),
+};
+
+module_platform_driver(da9052_led_driver);
+
+MODULE_AUTHOR("Dialog Semiconductor Ltd <dchen@diasemi.com>");
+MODULE_DESCRIPTION("LED driver for Dialog DA9052 PMIC");
+MODULE_LICENSE("GPL");
next reply other threads:[~2012-02-22 13:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-02-22 13:09 Ashish Jangam [this message]
2012-03-13 12:26 ` [PATCH] LEDS: LED module for DA9052/53 PMIC v2 Ashish Jangam
2012-03-15 16:50 ` Lars-Peter Clausen
2012-04-05 22:46 ` Andrew Morton
2012-04-05 22:52 ` Andrew Morton
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1329916149.24042.7.camel@dhruva \
--to=ashish.jangam@kpitcummins.com \
--cc=Dajun.Chen@diasemi.com \
--cc=lars@metafoo.de \
--cc=linux-kernel@vger.kernel.org \
--cc=rpurdie@rpsys.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.