From: Aneesh V <aneesh@ti.com>
To: devicetree-discuss@lists.ozlabs.org
Cc: linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
linux-arm-kernel@lists.infradead.org, Aneesh V <aneesh@ti.com>,
Rajendra Nayak <rnayak@ti.com>, Benoit Cousson <b-cousson@ti.com>,
Grant Likely <grant.likely@secretlab.ca>
Subject: [PATCH v2 3/4] arm: dts: EMIF and LPDDR2 device tree data for OMAP4 boards
Date: Fri, 16 Mar 2012 00:04:06 +0530 [thread overview]
Message-ID: <1331836447-7584-4-git-send-email-aneesh@ti.com> (raw)
In-Reply-To: <1331836447-7584-1-git-send-email-aneesh@ti.com>
Device tree data for the EMIF sdram controllers in OMAP4
and LPDDR2 memory devices attached to OMAP4 boards.
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Aneesh V <aneesh@ti.com>
---
v1:
- Removed DDR3 only parameters from
elpida_ecb240abacn.dtsi
---
arch/arm/boot/dts/elpida_ecb240abacn.dtsi | 67 +++++++++++++++++++++++++++++
arch/arm/boot/dts/omap4-panda.dts | 13 ++++++
arch/arm/boot/dts/omap4-sdp.dts | 13 ++++++
arch/arm/boot/dts/omap4.dtsi | 18 ++++++++
4 files changed, 111 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/elpida_ecb240abacn.dtsi
diff --git a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
new file mode 100644
index 0000000..34b9f72
--- /dev/null
+++ b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
@@ -0,0 +1,67 @@
+/*
+ * Common devices used in different OMAP boards
+ */
+
+/ {
+ elpida_ECB240ABACN: lpddr2 {
+ compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+ density = <2048>;
+ io-width = <32>;
+
+ tRPab-min-tck = <3>;
+ tRCD-min-tck = <3>;
+ tWR-min-tck = <3>;
+ tRASmin-min-tck = <3>;
+ tRRD-min-tck = <2>;
+ tWTR-min-tck = <2>;
+ tXP-min-tck = <2>;
+ tRTP-min-tck = <2>;
+ tCKE-min-tck = <3>;
+ tCKESR-min-tck = <3>;
+ tFAW-min-tck = <8>;
+
+ timings_elpida_ECB240ABACN_400mhz: lpddr2-timings@0 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <400000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ tDQSCK-max-derated = <6000>;
+ };
+
+ timings_elpida_ECB240ABACN_200mhz: lpddr2-timings@1 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <200000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <10000>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ tDQSCK-max-derated = <6000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 9755ad5..f548523 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -8,6 +8,7 @@
/dts-v1/;
/include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
/ {
model = "TI OMAP4 PandaBoard";
@@ -17,4 +18,16 @@
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
+
+ ocp {
+ emif1: emif@0x4c000000 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+ };
+
+ emif2: emif@0x4d000000 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 63c6b2b..6dc08bc 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -8,6 +8,7 @@
/dts-v1/;
/include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
/ {
model = "TI OMAP4 SDP board";
@@ -17,4 +18,16 @@
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
+
+ ocp {
+ emif1: emif@0x4c000000 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+ };
+
+ emif2: emif@0x4d000000 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 70a44f6..fe3664a 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -127,5 +127,23 @@
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
+
+ emif1: emif@0x4c000000 {
+ compatible = "ti,emif-4d";
+ ti,hwmods = "emif1";
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
+
+ emif2: emif@0x4d000000 {
+ compatible = "ti,emif-4d";
+ ti,hwmods = "emif2";
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
};
};
--
1.7.1
WARNING: multiple messages have this Message-ID (diff)
From: aneesh@ti.com (Aneesh V)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 3/4] arm: dts: EMIF and LPDDR2 device tree data for OMAP4 boards
Date: Fri, 16 Mar 2012 00:04:06 +0530 [thread overview]
Message-ID: <1331836447-7584-4-git-send-email-aneesh@ti.com> (raw)
In-Reply-To: <1331836447-7584-1-git-send-email-aneesh@ti.com>
Device tree data for the EMIF sdram controllers in OMAP4
and LPDDR2 memory devices attached to OMAP4 boards.
Cc: Rajendra Nayak <rnayak@ti.com>
Cc: Benoit Cousson <b-cousson@ti.com>
Cc: Grant Likely <grant.likely@secretlab.ca>
Signed-off-by: Aneesh V <aneesh@ti.com>
---
v1:
- Removed DDR3 only parameters from
elpida_ecb240abacn.dtsi
---
arch/arm/boot/dts/elpida_ecb240abacn.dtsi | 67 +++++++++++++++++++++++++++++
arch/arm/boot/dts/omap4-panda.dts | 13 ++++++
arch/arm/boot/dts/omap4-sdp.dts | 13 ++++++
arch/arm/boot/dts/omap4.dtsi | 18 ++++++++
4 files changed, 111 insertions(+), 0 deletions(-)
create mode 100644 arch/arm/boot/dts/elpida_ecb240abacn.dtsi
diff --git a/arch/arm/boot/dts/elpida_ecb240abacn.dtsi b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
new file mode 100644
index 0000000..34b9f72
--- /dev/null
+++ b/arch/arm/boot/dts/elpida_ecb240abacn.dtsi
@@ -0,0 +1,67 @@
+/*
+ * Common devices used in different OMAP boards
+ */
+
+/ {
+ elpida_ECB240ABACN: lpddr2 {
+ compatible = "Elpida,ECB240ABACN","jedec,lpddr2-s4";
+ density = <2048>;
+ io-width = <32>;
+
+ tRPab-min-tck = <3>;
+ tRCD-min-tck = <3>;
+ tWR-min-tck = <3>;
+ tRASmin-min-tck = <3>;
+ tRRD-min-tck = <2>;
+ tWTR-min-tck = <2>;
+ tXP-min-tck = <2>;
+ tRTP-min-tck = <2>;
+ tCKE-min-tck = <3>;
+ tCKESR-min-tck = <3>;
+ tFAW-min-tck = <8>;
+
+ timings_elpida_ECB240ABACN_400mhz: lpddr2-timings at 0 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <400000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <7500>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ tDQSCK-max-derated = <6000>;
+ };
+
+ timings_elpida_ECB240ABACN_200mhz: lpddr2-timings at 1 {
+ compatible = "jedec,lpddr2-timings";
+ min-freq = <10000000>;
+ max-freq = <200000000>;
+ tRPab = <21000>;
+ tRCD = <18000>;
+ tWR = <15000>;
+ tRAS-min = <42000>;
+ tRRD = <10000>;
+ tWTR = <10000>;
+ tXP = <7500>;
+ tRTP = <7500>;
+ tCKESR = <15000>;
+ tDQSCK-max = <5500>;
+ tFAW = <50000>;
+ tZQCS = <90000>;
+ tZQCL = <360000>;
+ tZQinit = <1000000>;
+ tRAS-max-ns = <70000>;
+ tDQSCK-max-derated = <6000>;
+ };
+ };
+};
diff --git a/arch/arm/boot/dts/omap4-panda.dts b/arch/arm/boot/dts/omap4-panda.dts
index 9755ad5..f548523 100644
--- a/arch/arm/boot/dts/omap4-panda.dts
+++ b/arch/arm/boot/dts/omap4-panda.dts
@@ -8,6 +8,7 @@
/dts-v1/;
/include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
/ {
model = "TI OMAP4 PandaBoard";
@@ -17,4 +18,16 @@
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
+
+ ocp {
+ emif1: emif at 0x4c000000 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+ };
+
+ emif2: emif at 0x4d000000 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/omap4-sdp.dts b/arch/arm/boot/dts/omap4-sdp.dts
index 63c6b2b..6dc08bc 100644
--- a/arch/arm/boot/dts/omap4-sdp.dts
+++ b/arch/arm/boot/dts/omap4-sdp.dts
@@ -8,6 +8,7 @@
/dts-v1/;
/include/ "omap4.dtsi"
+/include/ "elpida_ecb240abacn.dtsi"
/ {
model = "TI OMAP4 SDP board";
@@ -17,4 +18,16 @@
device_type = "memory";
reg = <0x80000000 0x40000000>; /* 1 GB */
};
+
+ ocp {
+ emif1: emif at 0x4c000000 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+ };
+
+ emif2: emif at 0x4d000000 {
+ cs1-used;
+ device-handle = <&elpida_ECB240ABACN>;
+ };
+ };
};
diff --git a/arch/arm/boot/dts/omap4.dtsi b/arch/arm/boot/dts/omap4.dtsi
index 70a44f6..fe3664a 100644
--- a/arch/arm/boot/dts/omap4.dtsi
+++ b/arch/arm/boot/dts/omap4.dtsi
@@ -127,5 +127,23 @@
ti,hwmods = "uart4";
clock-frequency = <48000000>;
};
+
+ emif1: emif at 0x4c000000 {
+ compatible = "ti,emif-4d";
+ ti,hwmods = "emif1";
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
+
+ emif2: emif at 0x4d000000 {
+ compatible = "ti,emif-4d";
+ ti,hwmods = "emif2";
+ phy-type = <1>;
+ hw-caps-read-idle-ctrl;
+ hw-caps-ll-interface;
+ hw-caps-temp-alert;
+ };
};
};
--
1.7.1
next prev parent reply other threads:[~2012-03-15 18:35 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-15 18:34 [PATCH v2 0/4] dt: device tree support for TI EMIF driver Aneesh V
2012-03-15 18:34 ` Aneesh V
2012-03-15 18:34 ` [PATCH v2 1/4] dt: device tree bindings for LPDDR2 memories Aneesh V
2012-03-15 18:34 ` Aneesh V
2012-03-15 18:34 ` [PATCH v2 2/4] dt: emif: device tree bindings for TI's EMIF sdram controller Aneesh V
2012-03-15 18:34 ` Aneesh V
2012-03-15 18:34 ` Aneesh V [this message]
2012-03-15 18:34 ` [PATCH v2 3/4] arm: dts: EMIF and LPDDR2 device tree data for OMAP4 boards Aneesh V
2012-03-15 18:34 ` [PATCH v2 4/4] misc: emif: add device tree support to emif driver Aneesh V
2012-03-15 18:34 ` Aneesh V
2012-03-18 20:48 ` Grant Likely
2012-03-18 20:48 ` Grant Likely
2012-03-18 20:48 ` Grant Likely
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1331836447-7584-4-git-send-email-aneesh@ti.com \
--to=aneesh@ti.com \
--cc=b-cousson@ti.com \
--cc=devicetree-discuss@lists.ozlabs.org \
--cc=grant.likely@secretlab.ca \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=rnayak@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.