* is there way to control dss output bits?
@ 2012-03-19 9:10 Alex Tomas
2012-03-19 9:18 ` Tomi Valkeinen
0 siblings, 1 reply; 3+ messages in thread
From: Alex Tomas @ 2012-03-19 9:10 UTC (permalink / raw)
To: linux-omap
Hi,
I'm trying to build simple DAC to generate RGsB signal on a beagleboard.
say, the output is filled with green, then at "green" pins I get 1 all the time
while I'd like to get 0 while hsync/vsync are active. is it possible with OMAP?
I found UNUSEDBITS in the documentation, but that seem to be related to
RFBI and not to regular parallel output ?
thanks, Alex
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: is there way to control dss output bits?
2012-03-19 9:10 is there way to control dss output bits? Alex Tomas
@ 2012-03-19 9:18 ` Tomi Valkeinen
2012-03-19 9:27 ` Alex Tomas
0 siblings, 1 reply; 3+ messages in thread
From: Tomi Valkeinen @ 2012-03-19 9:18 UTC (permalink / raw)
To: Alex Tomas; +Cc: linux-omap
[-- Attachment #1: Type: text/plain, Size: 643 bytes --]
On Mon, 2012-03-19 at 12:10 +0300, Alex Tomas wrote:
> Hi,
>
> I'm trying to build simple DAC to generate RGsB signal on a beagleboard.
> say, the output is filled with green, then at "green" pins I get 1 all the time
> while I'd like to get 0 while hsync/vsync are active. is it possible with OMAP?
> I found UNUSEDBITS in the documentation, but that seem to be related to
> RFBI and not to regular parallel output ?
I'm not aware of such functionality. Why do you care what the green pins
are during hsync/vsync? The color pins should be used only when the
data-enable pin indicates that there's valid data there.
Tomi
[-- Attachment #2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 836 bytes --]
^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: is there way to control dss output bits?
2012-03-19 9:18 ` Tomi Valkeinen
@ 2012-03-19 9:27 ` Alex Tomas
0 siblings, 0 replies; 3+ messages in thread
From: Alex Tomas @ 2012-03-19 9:27 UTC (permalink / raw)
To: Tomi Valkeinen; +Cc: linux-omap
On Mon, Mar 19, 2012 at 12:18 PM, Tomi Valkeinen <tomi.valkeinen@ti.com> wrote:
>> I'm trying to build simple DAC to generate RGsB signal on a beagleboard.
>> say, the output is filled with green, then at "green" pins I get 1 all the time
>> while I'd like to get 0 while hsync/vsync are active. is it possible with OMAP?
>> I found UNUSEDBITS in the documentation, but that seem to be related to
>> RFBI and not to regular parallel output ?
>
> I'm not aware of such functionality. Why do you care what the green pins
> are during hsync/vsync? The color pins should be used only when the
> data-enable pin indicates that there's valid data there.
I see... I tried to re-used a schema which relies on this as that primitive DAC
basically sums "color" current with "sync" current.
(tested that on samsung chips).
thanks, Alex
^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2012-03-19 9:27 UTC | newest]
Thread overview: 3+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-19 9:10 is there way to control dss output bits? Alex Tomas
2012-03-19 9:18 ` Tomi Valkeinen
2012-03-19 9:27 ` Alex Tomas
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.