All of lore.kernel.org
 help / color / mirror / Atom feed
From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Mike Rapoport <mike@compulab.co.il>,
	Danny Huang <dahuang@nvidia.com>, Liam Girdwood <lrg@ti.com>,
	Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 3/4] regulator: Convert tps6586x to set_voltage_sel
Date: Sat, 24 Mar 2012 09:42:26 +0800	[thread overview]
Message-ID: <1332553346.14114.5.camel@phoenix> (raw)
In-Reply-To: <1332553050.14114.1.camel@phoenix>

Convert both tps6586x_[ldo|dvm]_set_voltage to one set_voltage_sel callback.

Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
 drivers/regulator/tps6586x-regulator.c |   70 +++++++++----------------------
 1 files changed, 21 insertions(+), 49 deletions(-)

diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index af3559b..51ca882 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -89,44 +89,31 @@ static int tps6586x_ldo_list_voltage(struct regulator_dev *rdev,
 }
 
 
-static int __tps6586x_ldo_set_voltage(struct device *parent,
-				      struct tps6586x_regulator *ri,
-				      int min_uV, int max_uV,
-				      unsigned *selector)
+static int tps6586x_set_voltage_sel(struct regulator_dev *rdev,
+				    unsigned selector)
 {
-	int val, uV;
+	struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
+	struct device *parent = to_tps6586x_dev(rdev);
+	int ret, val, rid = rdev_get_id(rdev);
 	uint8_t mask;
 
-	for (val = 0; val < ri->desc.n_voltages; val++) {
-		uV = ri->voltages[val] * 1000;
-
-		/* LDO0 has minimal voltage 1.2 rather than 1.25 */
-		if (ri->desc.id == TPS6586X_ID_LDO_0 && val == 0)
-			uV -= 50 * 1000;
-
-		/* use the first in-range value */
-		if (min_uV <= uV && uV <= max_uV) {
-
-			*selector = val;
+	val = selector << ri->volt_shift;
+	mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift;
 
-			val <<= ri->volt_shift;
-			mask = ((1 << ri->volt_nbits) - 1) << ri->volt_shift;
+	ret = tps6586x_update(parent, ri->volt_reg, val, mask);
+	if (ret)
+		return ret;
 
-			return tps6586x_update(parent, ri->volt_reg, val, mask);
-		}
+	/* Update go bit for DVM regulators */
+	switch (rid) {
+	case TPS6586X_ID_LDO_2:
+	case TPS6586X_ID_LDO_4:
+	case TPS6586X_ID_SM_0:
+	case TPS6586X_ID_SM_1:
+		ret = tps6586x_set_bits(parent, ri->go_reg, 1 << ri->go_bit);
+		break;
 	}
-
-	return -EINVAL;
-}
-
-static int tps6586x_ldo_set_voltage(struct regulator_dev *rdev,
-				    int min_uV, int max_uV, unsigned *selector)
-{
-	struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
-	struct device *parent = to_tps6586x_dev(rdev);
-
-	return __tps6586x_ldo_set_voltage(parent, ri, min_uV, max_uV,
-					  selector);
+	return ret;
 }
 
 static int tps6586x_get_voltage_sel(struct regulator_dev *rdev)
@@ -149,21 +136,6 @@ static int tps6586x_get_voltage_sel(struct regulator_dev *rdev)
 	return val;
 }
 
-static int tps6586x_dvm_set_voltage(struct regulator_dev *rdev,
-				    int min_uV, int max_uV, unsigned *selector)
-{
-	struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
-	struct device *parent = to_tps6586x_dev(rdev);
-	int ret;
-
-	ret = __tps6586x_ldo_set_voltage(parent, ri, min_uV, max_uV,
-					 selector);
-	if (ret)
-		return ret;
-
-	return tps6586x_set_bits(parent, ri->go_reg, 1 << ri->go_bit);
-}
-
 static int tps6586x_regulator_enable(struct regulator_dev *rdev)
 {
 	struct tps6586x_regulator *ri = rdev_get_drvdata(rdev);
@@ -199,7 +171,7 @@ static int tps6586x_regulator_is_enabled(struct regulator_dev *rdev)
 static struct regulator_ops tps6586x_regulator_ldo_ops = {
 	.list_voltage = tps6586x_ldo_list_voltage,
 	.get_voltage_sel = tps6586x_get_voltage_sel,
-	.set_voltage = tps6586x_ldo_set_voltage,
+	.set_voltage_sel = tps6586x_set_voltage_sel,
 
 	.is_enabled = tps6586x_regulator_is_enabled,
 	.enable = tps6586x_regulator_enable,
@@ -209,7 +181,7 @@ static struct regulator_ops tps6586x_regulator_ldo_ops = {
 static struct regulator_ops tps6586x_regulator_dvm_ops = {
 	.list_voltage = tps6586x_ldo_list_voltage,
 	.get_voltage_sel = tps6586x_get_voltage_sel,
-	.set_voltage = tps6586x_dvm_set_voltage,
+	.set_voltage_sel = tps6586x_set_voltage_sel,
 
 	.is_enabled = tps6586x_regulator_is_enabled,
 	.enable = tps6586x_regulator_enable,
-- 
1.7.5.4




  parent reply	other threads:[~2012-03-24  1:42 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-03-24  1:37 [PATCH 1/4] regulator: tps6586x: Fix list minimal voltage setting for LDO0 Axel Lin
2012-03-24  1:38 ` [PATCH 2/4] regulator: Convert tps6586x to get_voltage_sel Axel Lin
2012-03-24  1:42 ` Axel Lin [this message]
2012-03-24  1:44 ` [PATCH 4/4] regulator: Merge tps6586x_regulator_ldo_ops and tps6586x_regulator_dvm_ops Axel Lin
2012-03-26 10:56 ` [PATCH 1/4] regulator: tps6586x: Fix list minimal voltage setting for LDO0 Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1332553346.14114.5.camel@phoenix \
    --to=axel.lin@gmail.com \
    --cc=broonie@opensource.wolfsonmicro.com \
    --cc=dahuang@nvidia.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=lrg@ti.com \
    --cc=mike@compulab.co.il \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.