From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Mike Rapoport <mike@compulab.co.il>,
Danny Huang <dahuang@nvidia.com>, Liam Girdwood <lrg@ti.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>
Subject: [PATCH 4/4] regulator: Merge tps6586x_regulator_ldo_ops and tps6586x_regulator_dvm_ops
Date: Sat, 24 Mar 2012 09:44:42 +0800 [thread overview]
Message-ID: <1332553482.14114.7.camel@phoenix> (raw)
In-Reply-To: <1332553050.14114.1.camel@phoenix>
Now all the callback implementation are the same for both ldo and dvm
regulator_ops, merge them to tps6586x_regulator_ops.
Also rename tps6586x_ldo_list_voltage to tps6586x_list_voltage.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/tps6586x-regulator.c | 25 +++++++------------------
1 files changed, 7 insertions(+), 18 deletions(-)
diff --git a/drivers/regulator/tps6586x-regulator.c b/drivers/regulator/tps6586x-regulator.c
index 51ca882..18f5337 100644
--- a/drivers/regulator/tps6586x-regulator.c
+++ b/drivers/regulator/tps6586x-regulator.c
@@ -75,8 +75,7 @@ static inline struct device *to_tps6586x_dev(struct regulator_dev *rdev)
return rdev_get_dev(rdev)->parent->parent;
}
-static int tps6586x_ldo_list_voltage(struct regulator_dev *rdev,
- unsigned selector)
+static int tps6586x_list_voltage(struct regulator_dev *rdev, unsigned selector)
{
struct tps6586x_regulator *info = rdev_get_drvdata(rdev);
int rid = rdev_get_id(rdev);
@@ -168,18 +167,8 @@ static int tps6586x_regulator_is_enabled(struct regulator_dev *rdev)
return !!(reg_val & (1 << ri->enable_bit[0]));
}
-static struct regulator_ops tps6586x_regulator_ldo_ops = {
- .list_voltage = tps6586x_ldo_list_voltage,
- .get_voltage_sel = tps6586x_get_voltage_sel,
- .set_voltage_sel = tps6586x_set_voltage_sel,
-
- .is_enabled = tps6586x_regulator_is_enabled,
- .enable = tps6586x_regulator_enable,
- .disable = tps6586x_regulator_disable,
-};
-
-static struct regulator_ops tps6586x_regulator_dvm_ops = {
- .list_voltage = tps6586x_ldo_list_voltage,
+static struct regulator_ops tps6586x_regulator_ops = {
+ .list_voltage = tps6586x_list_voltage,
.get_voltage_sel = tps6586x_get_voltage_sel,
.set_voltage_sel = tps6586x_set_voltage_sel,
@@ -213,11 +202,11 @@ static int tps6586x_dvm_voltages[] = {
1325, 1350, 1375, 1400, 1425, 1450, 1475, 1500,
};
-#define TPS6586X_REGULATOR(_id, vdata, _ops, vreg, shift, nbits, \
+#define TPS6586X_REGULATOR(_id, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1) \
.desc = { \
.name = "REG-" #_id, \
- .ops = &tps6586x_regulator_##_ops, \
+ .ops = &tps6586x_regulator_ops, \
.type = REGULATOR_VOLTAGE, \
.id = TPS6586X_ID_##_id, \
.n_voltages = ARRAY_SIZE(tps6586x_##vdata##_voltages), \
@@ -239,14 +228,14 @@ static int tps6586x_dvm_voltages[] = {
#define TPS6586X_LDO(_id, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1) \
{ \
- TPS6586X_REGULATOR(_id, vdata, ldo_ops, vreg, shift, nbits, \
+ TPS6586X_REGULATOR(_id, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1) \
}
#define TPS6586X_DVM(_id, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1, goreg, gobit) \
{ \
- TPS6586X_REGULATOR(_id, vdata, dvm_ops, vreg, shift, nbits, \
+ TPS6586X_REGULATOR(_id, vdata, vreg, shift, nbits, \
ereg0, ebit0, ereg1, ebit1) \
TPS6586X_REGULATOR_DVM_GOREG(goreg, gobit) \
}
--
1.7.5.4
next prev parent reply other threads:[~2012-03-24 1:44 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-24 1:37 [PATCH 1/4] regulator: tps6586x: Fix list minimal voltage setting for LDO0 Axel Lin
2012-03-24 1:38 ` [PATCH 2/4] regulator: Convert tps6586x to get_voltage_sel Axel Lin
2012-03-24 1:42 ` [PATCH 3/4] regulator: Convert tps6586x to set_voltage_sel Axel Lin
2012-03-24 1:44 ` Axel Lin [this message]
2012-03-26 10:56 ` [PATCH 1/4] regulator: tps6586x: Fix list minimal voltage setting for LDO0 Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1332553482.14114.7.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=dahuang@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
--cc=mike@compulab.co.il \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.