* does a meta-intel (sub)layer require adding the meta-intel layer to bblayers.conf?
@ 2012-03-25 17:23 Robert P. J. Day
2012-03-25 17:40 ` Tom Zanussi
0 siblings, 1 reply; 6+ messages in thread
From: Robert P. J. Day @ 2012-03-25 17:23 UTC (permalink / raw)
To: Yocto discussion list
again, a discrepancy between the docs and the source files. i
checked out the entire meta-intel layer, and below that the file
meta-crownbay/README clearly states:
"Having done that, and assuming you extracted the BSP tarball contents
at the top-level of your yocto build tree, you can build a crownbay
image by adding the location of the meta-crownbay layer to
bblayers.conf, along with the meta-intel layer itself (to access
common metadata shared between BSPs) e.g.:
yocto/meta-intel \
yocto/meta-intel/meta-crownbay \"
however, the ref manual, Section 4.1, "BSP Layers", suggests only:
BBLAYERS = " \
/usr/local/src/yocto/meta \
/usr/local/src/yocto/meta-yocto \
/usr/local/src/yocto/meta-<bsp_name> \
"
note no mention of including "meta-intel" layer. clarification?
rday
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: does a meta-intel (sub)layer require adding the meta-intel layer to bblayers.conf?
2012-03-25 17:23 does a meta-intel (sub)layer require adding the meta-intel layer to bblayers.conf? Robert P. J. Day
@ 2012-03-25 17:40 ` Tom Zanussi
2012-03-25 17:46 ` Robert P. J. Day
2012-03-25 20:05 ` Robert P. J. Day
0 siblings, 2 replies; 6+ messages in thread
From: Tom Zanussi @ 2012-03-25 17:40 UTC (permalink / raw)
To: Robert P. J. Day; +Cc: Yocto discussion list
On Sun, 2012-03-25 at 13:23 -0400, Robert P. J. Day wrote:
> again, a discrepancy between the docs and the source files. i
> checked out the entire meta-intel layer, and below that the file
> meta-crownbay/README clearly states:
>
> "Having done that, and assuming you extracted the BSP tarball contents
> at the top-level of your yocto build tree, you can build a crownbay
> image by adding the location of the meta-crownbay layer to
> bblayers.conf, along with the meta-intel layer itself (to access
> common metadata shared between BSPs) e.g.:
>
> yocto/meta-intel \
> yocto/meta-intel/meta-crownbay \"
>
> however, the ref manual, Section 4.1, "BSP Layers", suggests only:
>
> BBLAYERS = " \
> /usr/local/src/yocto/meta \
> /usr/local/src/yocto/meta-yocto \
> /usr/local/src/yocto/meta-<bsp_name> \
> "
>
> note no mention of including "meta-intel" layer. clarification?
>
Yes, I think that's as it should be - the general-purpose documentation
shouldn't mention specific layers. meta-intel has its own layering
requirements as mentioned in the READMEs for those BSPs. Also I think
the text mentions it's an example, but I guess I'm a bit confused since
I'm finding that in section 5.1. Example Filesystem Layout here:
http://www.yoctoproject.org/docs/current/poky-ref-manual/poky-ref-manual.html
Am I looking at the wrong thing?
In either case, possibly a note that this is just an example and that a
given layer may have its own requirements?
Tom
> rday
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: does a meta-intel (sub)layer require adding the meta-intel layer to bblayers.conf?
2012-03-25 17:40 ` Tom Zanussi
@ 2012-03-25 17:46 ` Robert P. J. Day
2012-03-25 19:06 ` Tom Zanussi
2012-03-25 20:05 ` Robert P. J. Day
1 sibling, 1 reply; 6+ messages in thread
From: Robert P. J. Day @ 2012-03-25 17:46 UTC (permalink / raw)
To: Tom Zanussi; +Cc: Yocto discussion list
On Sun, 25 Mar 2012, Tom Zanussi wrote:
> On Sun, 2012-03-25 at 13:23 -0400, Robert P. J. Day wrote:
> > again, a discrepancy between the docs and the source files. i
> > checked out the entire meta-intel layer, and below that the file
> > meta-crownbay/README clearly states:
> >
> > "Having done that, and assuming you extracted the BSP tarball contents
> > at the top-level of your yocto build tree, you can build a crownbay
> > image by adding the location of the meta-crownbay layer to
> > bblayers.conf, along with the meta-intel layer itself (to access
> > common metadata shared between BSPs) e.g.:
> >
> > yocto/meta-intel \
> > yocto/meta-intel/meta-crownbay \"
> >
> > however, the ref manual, Section 4.1, "BSP Layers", suggests only:
> >
> > BBLAYERS = " \
> > /usr/local/src/yocto/meta \
> > /usr/local/src/yocto/meta-yocto \
> > /usr/local/src/yocto/meta-<bsp_name> \
> > "
> >
> > note no mention of including "meta-intel" layer. clarification?
> >
>
> Yes, I think that's as it should be - the general-purpose documentation
> shouldn't mention specific layers. meta-intel has its own layering
> requirements as mentioned in the READMEs for those BSPs. Also I think
> the text mentions it's an example, but I guess I'm a bit confused since
> I'm finding that in section 5.1. Example Filesystem Layout here:
>
> http://www.yoctoproject.org/docs/current/poky-ref-manual/poky-ref-manual.html
>
> Am I looking at the wrong thing?
>
> In either case, possibly a note that this is just an example and that a
> given layer may have its own requirements?
hang on ... i can see that meta-intel is a valid layer, under which
you can find conf/machine/include/ia32-base.inc. and in all of the
*specific* intel-related BSPs, well:
$ grep -r ia32-base.inc *
meta-cedartrail/conf/machine/cedartrail.conf:require conf/machine/include/ia32-base.inc
meta-crownbay/conf/machine/crownbay.conf:require conf/machine/include/ia32-base.inc
meta-crownbay/conf/machine/crownbay-noemgd.conf:require conf/machine/include/ia32-base.inc
meta-emenlow/conf/machine/emenlow.conf:require conf/machine/include/ia32-base.inc
meta-fishriver/conf/machine/fishriver.conf:require conf/machine/include/ia32-base.inc
meta-fri2/conf/machine/fri2-noemgd.conf:require conf/machine/include/ia32-base.inc
meta-fri2/conf/machine/fri2.conf:require conf/machine/include/ia32-base.inc
meta-jasperforest/conf/machine/jasperforest.conf:require conf/machine/include/ia32-base.inc
meta-n450/conf/machine/n450.conf:require conf/machine/include/ia32-base.inc
meta-romley/conf/machine/romley.conf:require conf/machine/include/ia32-base.inc
meta-sugarbay/conf/machine/sugarbay.conf:require conf/machine/include/ia32-base.inc
meta-sys940x/conf/machine/sys940x-noemgd.conf:require conf/machine/include/ia32-base.inc
meta-sys940x/conf/machine/sys940x.conf:require conf/machine/include/ia32-base.inc
$
that *would* seem to require adding meta-intel to your layers file,
no? or am i misunderstanding something?
rday
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: does a meta-intel (sub)layer require adding the meta-intel layer to bblayers.conf?
2012-03-25 17:46 ` Robert P. J. Day
@ 2012-03-25 19:06 ` Tom Zanussi
0 siblings, 0 replies; 6+ messages in thread
From: Tom Zanussi @ 2012-03-25 19:06 UTC (permalink / raw)
To: Robert P. J. Day; +Cc: Yocto discussion list
On Sun, 2012-03-25 at 13:46 -0400, Robert P. J. Day wrote:
> On Sun, 25 Mar 2012, Tom Zanussi wrote:
>
> > On Sun, 2012-03-25 at 13:23 -0400, Robert P. J. Day wrote:
> > > again, a discrepancy between the docs and the source files. i
> > > checked out the entire meta-intel layer, and below that the file
> > > meta-crownbay/README clearly states:
> > >
> > > "Having done that, and assuming you extracted the BSP tarball contents
> > > at the top-level of your yocto build tree, you can build a crownbay
> > > image by adding the location of the meta-crownbay layer to
> > > bblayers.conf, along with the meta-intel layer itself (to access
> > > common metadata shared between BSPs) e.g.:
> > >
> > > yocto/meta-intel \
> > > yocto/meta-intel/meta-crownbay \"
> > >
> > > however, the ref manual, Section 4.1, "BSP Layers", suggests only:
> > >
> > > BBLAYERS = " \
> > > /usr/local/src/yocto/meta \
> > > /usr/local/src/yocto/meta-yocto \
> > > /usr/local/src/yocto/meta-<bsp_name> \
> > > "
> > >
> > > note no mention of including "meta-intel" layer. clarification?
> > >
> >
> > Yes, I think that's as it should be - the general-purpose documentation
> > shouldn't mention specific layers. meta-intel has its own layering
> > requirements as mentioned in the READMEs for those BSPs. Also I think
> > the text mentions it's an example, but I guess I'm a bit confused since
> > I'm finding that in section 5.1. Example Filesystem Layout here:
> >
> > http://www.yoctoproject.org/docs/current/poky-ref-manual/poky-ref-manual.html
> >
> > Am I looking at the wrong thing?
> >
> > In either case, possibly a note that this is just an example and that a
> > given layer may have its own requirements?
>
> hang on ... i can see that meta-intel is a valid layer, under which
> you can find conf/machine/include/ia32-base.inc. and in all of the
> *specific* intel-related BSPs, well:
>
> $ grep -r ia32-base.inc *
> meta-cedartrail/conf/machine/cedartrail.conf:require conf/machine/include/ia32-base.inc
> meta-crownbay/conf/machine/crownbay.conf:require conf/machine/include/ia32-base.inc
> meta-crownbay/conf/machine/crownbay-noemgd.conf:require conf/machine/include/ia32-base.inc
> meta-emenlow/conf/machine/emenlow.conf:require conf/machine/include/ia32-base.inc
> meta-fishriver/conf/machine/fishriver.conf:require conf/machine/include/ia32-base.inc
> meta-fri2/conf/machine/fri2-noemgd.conf:require conf/machine/include/ia32-base.inc
> meta-fri2/conf/machine/fri2.conf:require conf/machine/include/ia32-base.inc
> meta-jasperforest/conf/machine/jasperforest.conf:require conf/machine/include/ia32-base.inc
> meta-n450/conf/machine/n450.conf:require conf/machine/include/ia32-base.inc
> meta-romley/conf/machine/romley.conf:require conf/machine/include/ia32-base.inc
> meta-sugarbay/conf/machine/sugarbay.conf:require conf/machine/include/ia32-base.inc
> meta-sys940x/conf/machine/sys940x-noemgd.conf:require conf/machine/include/ia32-base.inc
> meta-sys940x/conf/machine/sys940x.conf:require conf/machine/include/ia32-base.inc
> $
>
> that *would* seem to require adding meta-intel to your layers file,
> no? or am i misunderstanding something?
>
Yes, if you're using one of the meta-intel BSPs (and as you point out
that's mentioned as a requirement in each of those BSPs). But the
meta-intel BSPs shouldn't be mentioned in the generic Yocto
documentation (and aren't in the snippet you mention, unless I'm looking
in the wrong place?).
Tom
> rday
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: does a meta-intel (sub)layer require adding the meta-intel layer to bblayers.conf?
2012-03-25 17:40 ` Tom Zanussi
2012-03-25 17:46 ` Robert P. J. Day
@ 2012-03-25 20:05 ` Robert P. J. Day
2012-03-25 22:09 ` Tom Zanussi
1 sibling, 1 reply; 6+ messages in thread
From: Robert P. J. Day @ 2012-03-25 20:05 UTC (permalink / raw)
To: Tom Zanussi; +Cc: Yocto discussion list
On Sun, 25 Mar 2012, Tom Zanussi wrote:
> On Sun, 2012-03-25 at 13:23 -0400, Robert P. J. Day wrote:
> > again, a discrepancy between the docs and the source files. i
> > checked out the entire meta-intel layer, and below that the file
> > meta-crownbay/README clearly states:
> >
> > "Having done that, and assuming you extracted the BSP tarball contents
> > at the top-level of your yocto build tree, you can build a crownbay
> > image by adding the location of the meta-crownbay layer to
> > bblayers.conf, along with the meta-intel layer itself (to access
> > common metadata shared between BSPs) e.g.:
> >
> > yocto/meta-intel \
> > yocto/meta-intel/meta-crownbay \"
> >
> > however, the ref manual, Section 4.1, "BSP Layers", suggests only:
> >
> > BBLAYERS = " \
> > /usr/local/src/yocto/meta \
> > /usr/local/src/yocto/meta-yocto \
> > /usr/local/src/yocto/meta-<bsp_name> \
> > "
> >
> > note no mention of including "meta-intel" layer. clarification?
> >
>
> Yes, I think that's as it should be - the general-purpose documentation
> shouldn't mention specific layers. meta-intel has its own layering
> requirements as mentioned in the READMEs for those BSPs. Also I think
> the text mentions it's an example, but I guess I'm a bit confused since
> I'm finding that in section 5.1. Example Filesystem Layout here:
>
> http://www.yoctoproject.org/docs/current/poky-ref-manual/poky-ref-manual.html
>
> Am I looking at the wrong thing?
ah, yes, i'm looking at the *newer* version of that doc as cloned
from yocto-docs where Section 4.1 of that manual is called "BSP
Layers" and really emphasizes meta-intel and related layers and,
because of that, has some awkward wording that might mislead the
reader. if you want to check the yocto-docs version of the same
manual, you might see what i'm talking about.
rday
--
========================================================================
Robert P. J. Day Ottawa, Ontario, CANADA
http://crashcourse.ca
Twitter: http://twitter.com/rpjday
LinkedIn: http://ca.linkedin.com/in/rpjday
========================================================================
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: does a meta-intel (sub)layer require adding the meta-intel layer to bblayers.conf?
2012-03-25 20:05 ` Robert P. J. Day
@ 2012-03-25 22:09 ` Tom Zanussi
0 siblings, 0 replies; 6+ messages in thread
From: Tom Zanussi @ 2012-03-25 22:09 UTC (permalink / raw)
To: Robert P. J. Day; +Cc: Yocto discussion list
On Sun, 2012-03-25 at 16:05 -0400, Robert P. J. Day wrote:
> On Sun, 25 Mar 2012, Tom Zanussi wrote:
>
> > On Sun, 2012-03-25 at 13:23 -0400, Robert P. J. Day wrote:
> > > again, a discrepancy between the docs and the source files. i
> > > checked out the entire meta-intel layer, and below that the file
> > > meta-crownbay/README clearly states:
> > >
> > > "Having done that, and assuming you extracted the BSP tarball contents
> > > at the top-level of your yocto build tree, you can build a crownbay
> > > image by adding the location of the meta-crownbay layer to
> > > bblayers.conf, along with the meta-intel layer itself (to access
> > > common metadata shared between BSPs) e.g.:
> > >
> > > yocto/meta-intel \
> > > yocto/meta-intel/meta-crownbay \"
> > >
> > > however, the ref manual, Section 4.1, "BSP Layers", suggests only:
> > >
> > > BBLAYERS = " \
> > > /usr/local/src/yocto/meta \
> > > /usr/local/src/yocto/meta-yocto \
> > > /usr/local/src/yocto/meta-<bsp_name> \
> > > "
> > >
> > > note no mention of including "meta-intel" layer. clarification?
> > >
> >
> > Yes, I think that's as it should be - the general-purpose documentation
> > shouldn't mention specific layers. meta-intel has its own layering
> > requirements as mentioned in the READMEs for those BSPs. Also I think
> > the text mentions it's an example, but I guess I'm a bit confused since
> > I'm finding that in section 5.1. Example Filesystem Layout here:
> >
> > http://www.yoctoproject.org/docs/current/poky-ref-manual/poky-ref-manual.html
> >
> > Am I looking at the wrong thing?
>
> ah, yes, i'm looking at the *newer* version of that doc as cloned
> from yocto-docs where Section 4.1 of that manual is called "BSP
> Layers" and really emphasizes meta-intel and related layers and,
> because of that, has some awkward wording that might mislead the
> reader. if you want to check the yocto-docs version of the same
> manual, you might see what i'm talking about.
>
Yeah, I do see... I think all the examples in that section should be
removed - some of them aren't even BSP layers, and at any rate we really
don't need specific examples in a generic section like that.
Posting an update to that section now...
Tom
> rday
>
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-03-25 22:08 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-03-25 17:23 does a meta-intel (sub)layer require adding the meta-intel layer to bblayers.conf? Robert P. J. Day
2012-03-25 17:40 ` Tom Zanussi
2012-03-25 17:46 ` Robert P. J. Day
2012-03-25 19:06 ` Tom Zanussi
2012-03-25 20:05 ` Robert P. J. Day
2012-03-25 22:09 ` Tom Zanussi
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.