Re: [PATCH 1/4] regulator: tps65910: update type for regmap

[Rhyland Klein <rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>]

On Wed, 2012-04-18 at 02:25 -0700, Mark Brown wrote:
> * PGP Signed by an unknown key
> 
> On Tue, Apr 17, 2012 at 06:00:26PM -0700, Rhyland Klein wrote:
> > When accessing the regmap via the read/write functions, we need to use a
> > unsigned int * instead of a u8 * otherwise corruption will occur.
> > 
> > Signed-off-by: Rhyland Klein <rklein-DDmLM1+adcrQT0dZR+AlfA@public.gmane.org>
> 
> >  static inline int tps65910_read(struct tps65910_reg *pmic, u8 reg)
> >  {
> > -	u8 val;
> > +	unsigned int val;
> >  	int err;
> >  
> >  	err = pmic->mfd->read(pmic->mfd, reg, 1, &val);
> 
> Ugh, this interface is just broken all round - there's absolutely no
> type safety here and all users of these functions will be broken (a
> similar issue applies on write).  It's much better to fix this for 3.4
> by converting the core code to use regmap_raw_ functions which take
> native formatted data for the device like the function driver API
> actually expects.

Which interface are you saying is broken? The regmap interface or the
one internal to the tps65910 code? 

> 
> Looking at the MFD code the fix for 3.5 should at the very least involve
> making the functions take typed pointers, though given the way they're
> implemented right now with direct references in the subdevices I'd also
> consider just having the subdevices uses regmap directly as the wrappers
> are just adding an opportunity for error (the bit operations could be
> converted into static inlines in the header too).
> 

So to be clear... Your recommendation is to change the tps65910 code to
remove the common read/write callbacks and to use regmap directly in
each component, and then when using regmap, do use the regmap raw
functions instead of the bulkread/write?

> * Unknown Key
> * 0x6E30FDDD

Thanks,
rhyland

---
nvpublic