From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: David Dajun Chen <dchen@diasemi.com>,
Ashish Jangam <ashish.jangam@kpitcummins.com>,
"Ying-Chun Liu (PaulLiu)" <paul.liu@linaro.org>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>
Subject: [PATCH RFT 2/3] regulator: da9052: Use regulator_get_voltage_sel_regmap()
Date: Tue, 24 Apr 2012 09:54:38 +0800 [thread overview]
Message-ID: <1335232478.6470.3.camel@phoenix> (raw)
In-Reply-To: <1335232352.6470.1.camel@phoenix>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/da9052-regulator.c | 32 ++++++++------------------------
1 files changed, 8 insertions(+), 24 deletions(-)
diff --git a/drivers/regulator/da9052-regulator.c b/drivers/regulator/da9052-regulator.c
index 4f2e6f9..16815f1 100644
--- a/drivers/regulator/da9052-regulator.c
+++ b/drivers/regulator/da9052-regulator.c
@@ -70,7 +70,6 @@ struct da9052_regulator_info {
int step_uV;
int min_uV;
int max_uV;
- unsigned char volt_shift;
unsigned char activate_bit;
};
@@ -209,9 +208,8 @@ static int da9052_regulator_set_voltage(struct regulator_dev *rdev,
if (ret < 0)
return ret;
- ret = da9052_reg_update(regulator->da9052,
- DA9052_BUCKCORE_REG + id,
- (1 << info->volt_shift) - 1, *selector);
+ ret = da9052_reg_update(regulator->da9052, rdev->desc->vsel_reg,
+ rdev->desc->vsel_mask, *selector);
if (ret < 0)
return ret;
@@ -232,29 +230,13 @@ static int da9052_regulator_set_voltage(struct regulator_dev *rdev,
return ret;
}
-static int da9052_get_regulator_voltage_sel(struct regulator_dev *rdev)
-{
- struct da9052_regulator *regulator = rdev_get_drvdata(rdev);
- struct da9052_regulator_info *info = regulator->info;
- int offset = rdev_get_id(rdev);
- int ret;
-
- ret = da9052_reg_read(regulator->da9052, DA9052_BUCKCORE_REG + offset);
- if (ret < 0)
- return ret;
-
- ret &= ((1 << info->volt_shift) - 1);
-
- return ret;
-}
-
static struct regulator_ops da9052_dcdc_ops = {
.set_voltage = da9052_regulator_set_voltage,
.get_current_limit = da9052_dcdc_get_current_limit,
.set_current_limit = da9052_dcdc_set_current_limit,
.list_voltage = da9052_list_voltage,
- .get_voltage_sel = da9052_get_regulator_voltage_sel,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@@ -264,7 +246,7 @@ static struct regulator_ops da9052_ldo_ops = {
.set_voltage = da9052_regulator_set_voltage,
.list_voltage = da9052_list_voltage,
- .get_voltage_sel = da9052_get_regulator_voltage_sel,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
@@ -279,13 +261,14 @@ static struct regulator_ops da9052_ldo_ops = {
.id = DA9052_ID_##_id,\
.n_voltages = (max - min) / step + 1, \
.owner = THIS_MODULE,\
+ .vsel_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
+ .vsel_mask = (1 << (sbits)) - 1,\
.enable_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.enable_mask = 1 << (ebits),\
},\
.min_uV = (min) * 1000,\
.max_uV = (max) * 1000,\
.step_uV = (step) * 1000,\
- .volt_shift = (sbits),\
.activate_bit = (abits),\
}
@@ -298,13 +281,14 @@ static struct regulator_ops da9052_ldo_ops = {
.id = DA9052_ID_##_id,\
.n_voltages = (max - min) / step + 1, \
.owner = THIS_MODULE,\
+ .vsel_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
+ .vsel_mask = (1 << (sbits)) - 1,\
.enable_reg = DA9052_BUCKCORE_REG + DA9052_ID_##_id, \
.enable_mask = 1 << (ebits),\
},\
.min_uV = (min) * 1000,\
.max_uV = (max) * 1000,\
.step_uV = (step) * 1000,\
- .volt_shift = (sbits),\
.activate_bit = (abits),\
}
--
1.7.5.4
next prev parent reply other threads:[~2012-04-24 1:54 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-24 1:52 [PATCH RFT 1/3] regulator: 88pm8607: Use regulator_get_voltage_sel_regmap() Axel Lin
2012-04-24 1:54 ` Axel Lin [this message]
2012-05-04 12:30 ` [PATCH RFT 2/3] regulator: da9052: " Mark Brown
2012-04-24 1:56 ` [PATCH RFT 3/3] regulator: rc5t583: " Axel Lin
2012-05-04 12:32 ` Mark Brown
2012-05-04 12:38 ` [PATCH RFT 1/3] regulator: 88pm8607: " Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1335232478.6470.3.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=ashish.jangam@kpitcummins.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=dchen@diasemi.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
--cc=paul.liu@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.