From: Bastian Hecht <hechtb@googlemail.com>
To: linux-mtd@lists.infradead.org, linux-sh@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>,
Magnus Damm <magnus.damm@gmail.com>,
Laurent Pichart <laurent.pinchart@ideasonboard.com>
Subject: [PATCH v2 07/10] mtd: sh_flctl: Group sector accesses into a single transfer
Date: Wed, 25 Apr 2012 16:03:35 +0200 [thread overview]
Message-ID: <1335362618-4559-8-git-send-email-hechtb@gmail.com> (raw)
In-Reply-To: <1335362618-4559-1-git-send-email-hechtb@gmail.com>
When we use hardware ecc, the flctl is run in so-called "sector access
mode". We can bundle 4 sector accesses when using 2k page sizes to read
a whole page at once and speed up things.
Signed-off-by: Bastian Hecht <hechtb@gmail.com>
---
drivers/mtd/nand/sh_flctl.c | 44 ++++++++++++++++++------------------------
1 files changed, 19 insertions(+), 25 deletions(-)
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index b027370..96c88b8 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -368,25 +368,21 @@ static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
struct sh_flctl *flctl = mtd_to_flctl(mtd);
int sector, page_sectors;
- if (flctl->page_size)
- page_sectors = 4;
- else
- page_sectors = 1;
+ page_sectors = flctl->page_size ? 4 : 1;
+
+ set_cmd_regs(mtd, NAND_CMD_READ0,
+ (NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE | _4ECCCORRECT,
FLCMNCR(flctl));
+ writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
+ writel(page_addr << 2, FLADR(flctl));
- set_cmd_regs(mtd, NAND_CMD_READ0,
- (NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
+ empty_fifo(flctl);
+ start_translation(flctl);
for (sector = 0; sector < page_sectors; sector++) {
int ret;
-
- empty_fifo(flctl);
- writel(readl(FLCMDCR(flctl)) | 1, FLCMDCR(flctl));
- writel(page_addr << 2 | sector, FLADR(flctl));
-
- start_translation(flctl);
read_fiforeg(flctl, 512, 512 * sector);
ret = read_ecfiforeg(flctl,
@@ -397,8 +393,10 @@ static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
flctl->hwecc_cant_correct[sector] = 1;
writel(0x0, FL4ECCCR(flctl));
- wait_completion(flctl);
}
+
+ wait_completion(flctl);
+
writel(readl(FLCMNCR(flctl)) & ~(ACM_SACCES_MODE | _4ECCCORRECT),
FLCMNCR(flctl));
}
@@ -430,31 +428,27 @@ static void execmd_write_page_sector(struct mtd_info *mtd)
int i, page_addr = flctl->seqin_page_addr;
int sector, page_sectors;
- if (flctl->page_size)
- page_sectors = 4;
- else
- page_sectors = 1;
-
- writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl));
+ page_sectors = flctl->page_size ? 4 : 1;
set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
(NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
- for (sector = 0; sector < page_sectors; sector++) {
- empty_fifo(flctl);
- writel(readl(FLCMDCR(flctl)) | 1, FLCMDCR(flctl));
- writel(page_addr << 2 | sector, FLADR(flctl));
+ empty_fifo(flctl);
+ writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl));
+ writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
+ writel(page_addr << 2, FLADR(flctl));
+ start_translation(flctl);
- start_translation(flctl);
+ for (sector = 0; sector < page_sectors; sector++) {
write_fiforeg(flctl, 512, 512 * sector);
for (i = 0; i < 4; i++) {
wait_wecfifo_ready(flctl); /* wait for write ready */
writel(0xFFFFFFFF, FLECFIFO(flctl));
}
- wait_completion(flctl);
}
+ wait_completion(flctl);
writel(readl(FLCMNCR(flctl)) & ~ACM_SACCES_MODE, FLCMNCR(flctl));
}
--
1.7.5.4
WARNING: multiple messages have this Message-ID (diff)
From: Bastian Hecht <hechtb@googlemail.com>
To: linux-mtd@lists.infradead.org, linux-sh@vger.kernel.org
Cc: Brian Norris <computersforpeace@gmail.com>,
Magnus Damm <magnus.damm@gmail.com>,
Laurent Pichart <laurent.pinchart@ideasonboard.com>
Subject: [PATCH v2 07/10] mtd: sh_flctl: Group sector accesses into a single transfer
Date: Wed, 25 Apr 2012 14:03:35 +0000 [thread overview]
Message-ID: <1335362618-4559-8-git-send-email-hechtb@gmail.com> (raw)
In-Reply-To: <1335362618-4559-1-git-send-email-hechtb@gmail.com>
When we use hardware ecc, the flctl is run in so-called "sector access
mode". We can bundle 4 sector accesses when using 2k page sizes to read
a whole page at once and speed up things.
Signed-off-by: Bastian Hecht <hechtb@gmail.com>
---
drivers/mtd/nand/sh_flctl.c | 44 ++++++++++++++++++------------------------
1 files changed, 19 insertions(+), 25 deletions(-)
diff --git a/drivers/mtd/nand/sh_flctl.c b/drivers/mtd/nand/sh_flctl.c
index b027370..96c88b8 100644
--- a/drivers/mtd/nand/sh_flctl.c
+++ b/drivers/mtd/nand/sh_flctl.c
@@ -368,25 +368,21 @@ static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
struct sh_flctl *flctl = mtd_to_flctl(mtd);
int sector, page_sectors;
- if (flctl->page_size)
- page_sectors = 4;
- else
- page_sectors = 1;
+ page_sectors = flctl->page_size ? 4 : 1;
+
+ set_cmd_regs(mtd, NAND_CMD_READ0,
+ (NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE | _4ECCCORRECT,
FLCMNCR(flctl));
+ writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
+ writel(page_addr << 2, FLADR(flctl));
- set_cmd_regs(mtd, NAND_CMD_READ0,
- (NAND_CMD_READSTART << 8) | NAND_CMD_READ0);
+ empty_fifo(flctl);
+ start_translation(flctl);
for (sector = 0; sector < page_sectors; sector++) {
int ret;
-
- empty_fifo(flctl);
- writel(readl(FLCMDCR(flctl)) | 1, FLCMDCR(flctl));
- writel(page_addr << 2 | sector, FLADR(flctl));
-
- start_translation(flctl);
read_fiforeg(flctl, 512, 512 * sector);
ret = read_ecfiforeg(flctl,
@@ -397,8 +393,10 @@ static void execmd_read_page_sector(struct mtd_info *mtd, int page_addr)
flctl->hwecc_cant_correct[sector] = 1;
writel(0x0, FL4ECCCR(flctl));
- wait_completion(flctl);
}
+
+ wait_completion(flctl);
+
writel(readl(FLCMNCR(flctl)) & ~(ACM_SACCES_MODE | _4ECCCORRECT),
FLCMNCR(flctl));
}
@@ -430,31 +428,27 @@ static void execmd_write_page_sector(struct mtd_info *mtd)
int i, page_addr = flctl->seqin_page_addr;
int sector, page_sectors;
- if (flctl->page_size)
- page_sectors = 4;
- else
- page_sectors = 1;
-
- writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl));
+ page_sectors = flctl->page_size ? 4 : 1;
set_cmd_regs(mtd, NAND_CMD_PAGEPROG,
(NAND_CMD_PAGEPROG << 8) | NAND_CMD_SEQIN);
- for (sector = 0; sector < page_sectors; sector++) {
- empty_fifo(flctl);
- writel(readl(FLCMDCR(flctl)) | 1, FLCMDCR(flctl));
- writel(page_addr << 2 | sector, FLADR(flctl));
+ empty_fifo(flctl);
+ writel(readl(FLCMNCR(flctl)) | ACM_SACCES_MODE, FLCMNCR(flctl));
+ writel(readl(FLCMDCR(flctl)) | page_sectors, FLCMDCR(flctl));
+ writel(page_addr << 2, FLADR(flctl));
+ start_translation(flctl);
- start_translation(flctl);
+ for (sector = 0; sector < page_sectors; sector++) {
write_fiforeg(flctl, 512, 512 * sector);
for (i = 0; i < 4; i++) {
wait_wecfifo_ready(flctl); /* wait for write ready */
writel(0xFFFFFFFF, FLECFIFO(flctl));
}
- wait_completion(flctl);
}
+ wait_completion(flctl);
writel(readl(FLCMNCR(flctl)) & ~ACM_SACCES_MODE, FLCMNCR(flctl));
}
--
1.7.5.4
next prev parent reply other threads:[~2012-04-25 14:03 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-04-25 14:03 [PATCH v2 0/10] sh_flctl hardware ECC mode cleanup Bastian Hecht
2012-04-25 14:03 ` Bastian Hecht
2012-04-25 14:03 ` [PATCH v2 01/10] mtd: sh_flctl: Add missing iounmap() Bastian Hecht
2012-04-25 14:03 ` Bastian Hecht
2012-04-25 14:14 ` Laurent Pinchart
2012-04-25 14:14 ` Laurent Pinchart
2012-04-25 14:03 ` [PATCH v2 02/10] ARM: sh-mobile: mackerel: Add error IRQ resource Bastian Hecht
2012-04-25 14:03 ` Bastian Hecht
2012-04-25 14:03 ` [PATCH v2 03/10] mtd: sh_flctl: Add support for error IRQ Bastian Hecht
2012-04-25 14:03 ` Bastian Hecht
2012-04-25 14:03 ` [PATCH v2 04/10] mtd: sh_flctl: Use different OOB layout Bastian Hecht
2012-04-25 14:03 ` Bastian Hecht
2012-04-25 14:03 ` [PATCH v2 05/10] mtd: sh_flctl: Fix hardware ECC behaviour Bastian Hecht
2012-04-25 14:03 ` Bastian Hecht
2012-04-25 14:03 ` [PATCH v2 06/10] mtd: sh_flctl: Simplify the hardware ecc page read/write Bastian Hecht
2012-04-25 14:03 ` Bastian Hecht
2012-04-25 14:03 ` Bastian Hecht [this message]
2012-04-25 14:03 ` [PATCH v2 07/10] mtd: sh_flctl: Group sector accesses into a single transfer Bastian Hecht
2012-04-25 14:03 ` [PATCH v2 08/10] mtd: sh_flctl: Restructure the hardware ECC handling Bastian Hecht
2012-04-25 14:03 ` Bastian Hecht
2012-04-25 14:03 ` [PATCH v2 09/10] mtd: sh_flctl: Use user oob data in hardware ECC mode Bastian Hecht
2012-04-25 14:03 ` Bastian Hecht
2012-04-25 17:57 ` Brian Norris
2012-04-25 17:57 ` Brian Norris
2012-05-02 9:47 ` Bastian Hecht
2012-05-02 9:47 ` Bastian Hecht
2012-04-25 14:03 ` [PATCH v2 10/10] ARM: sh-mobile: mackerel: Use hardware error correction Bastian Hecht
2012-04-25 14:03 ` Bastian Hecht
2012-04-28 15:26 ` [PATCH v2 0/10] sh_flctl hardware ECC mode cleanup Artem Bityutskiy
2012-04-28 15:26 ` Artem Bityutskiy
2012-04-28 15:30 ` Artem Bityutskiy
2012-04-28 15:30 ` Artem Bityutskiy
2012-05-02 8:33 ` Bastian Hecht
2012-05-02 8:33 ` Bastian Hecht
2012-05-02 9:22 ` Bastian Hecht
2012-05-02 9:22 ` Bastian Hecht
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1335362618-4559-8-git-send-email-hechtb@gmail.com \
--to=hechtb@googlemail.com \
--cc=computersforpeace@gmail.com \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-mtd@lists.infradead.org \
--cc=linux-sh@vger.kernel.org \
--cc=magnus.damm@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.