All of lore.kernel.org
 help / color / mirror / Atom feed
* [RFCv2 0/6] Draft Software/Virtual AMP80211
@ 2012-04-24 13:17 Andrei Emeltchenko
  2012-04-24 13:17 ` [RFCv2 1/6] mac80211: softamp: Adds Bluetooth Software AMP Andrei Emeltchenko
                   ` (5 more replies)
  0 siblings, 6 replies; 12+ messages in thread
From: Andrei Emeltchenko @ 2012-04-24 13:17 UTC (permalink / raw)
  To: linux-bluetooth, linux-wireless

From: Andrei Emeltchenko <andrei.emeltchenko@intel.com>

RFC for Software / Virtual _DRAFT_ implementation of Bluetooth High Speed
by using wireless driver. Currently it can be used for testing Bluetooth
A2MP protocol.

Changes:
	RFCv2: Process basic HCI commands and basic data traffic; added skeleton
	for Netlink comms, took comments from reviewers.
	RFCv1: Initial release.

TODO:
	Change names from vamp to <softamp|bt_softamp|etc>

Main ideas:
 - Use existing wireless infrastructure nl80211, mac80211.
 - Use virtual interface of type NL80211_IFTYPE_BLUETOOTH_AMP. Then all
drivers supporting virtual interface should work.

After modifying iw it will be enabled by adding new virtual interface.

# iw phy <physical device> interface add vamp type vamp
# iw dev
phy#0
	Interface vamp
		ifindex 6
		type Virtual AMP
...
# hciconfig 
hci1:	Type: AMP  Bus: VIRTUAL
	BD Address: 00:00:00:00:00:00  ACL MTU: 0:0  SCO MTU: 0:0
	DOWN 
	RX bytes:0 acl:0 sco:0 events:0 errors:0
	TX bytes:0 acl:0 sco:0 commands:0 errors:0
...

Andrei Emeltchenko (6):
  mac80211: softamp: Adds Bluetooth Software AMP
  mac80211: softamp: Adds build config option
  hwsim: Adds support for BT SOFTAMP for testing
  mac80211: softamp: Handle assoc request
  mac80211: softamp: Netlink interface to softamp
  mac80211: softamp: Handle data traffic

 drivers/net/wireless/mac80211_hwsim.c |    3 +-
 include/linux/ieee80211.h             |   13 +
 include/linux/nl80211.h               |    1 +
 net/mac80211/Kconfig                  |    9 +
 net/mac80211/Makefile                 |    2 +
 net/mac80211/ieee80211_i.h            |    5 +
 net/mac80211/iface.c                  |    9 +
 net/mac80211/rx.c                     |    4 +
 net/mac80211/sta_info.h               |    4 +
 net/mac80211/util.c                   |    1 +
 net/mac80211/virtual_amp.c            |  675 +++++++++++++++++++++++++++++++++
 net/mac80211/virtual_amp.h            |   96 +++++
 12 files changed, 821 insertions(+), 1 deletion(-)
 create mode 100644 net/mac80211/virtual_amp.c
 create mode 100644 net/mac80211/virtual_amp.h

-- 
1.7.9.5


^ permalink raw reply	[flat|nested] 12+ messages in thread

end of thread, other threads:[~2012-05-07 11:59 UTC | newest]

Thread overview: 12+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2012-04-24 13:17 [RFCv2 0/6] Draft Software/Virtual AMP80211 Andrei Emeltchenko
2012-04-24 13:17 ` [RFCv2 1/6] mac80211: softamp: Adds Bluetooth Software AMP Andrei Emeltchenko
2012-05-07 11:41   ` Johannes Berg
2012-05-07 11:56     ` Andrei Emeltchenko
2012-05-07 11:59       ` Johannes Berg
2012-04-24 13:17 ` [RFCv2 2/6] mac80211: softamp: Adds build config option Andrei Emeltchenko
2012-04-24 13:17 ` [RFCv2 3/6] hwsim: Adds support for BT SOFTAMP for testing Andrei Emeltchenko
2012-04-24 13:17 ` [RFCv2 4/6] mac80211: softamp: Handle assoc request Andrei Emeltchenko
2012-05-07 11:42   ` Johannes Berg
2012-04-24 13:17 ` [RFCv2 5/6] mac80211: softamp: Netlink interface to softamp Andrei Emeltchenko
2012-05-07 11:42   ` Johannes Berg
2012-04-24 13:17 ` [RFCv2 6/6] mac80211: softamp: Handle data traffic Andrei Emeltchenko

This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.