* Using meta-intel with Denzil @ 2012-05-10 20:38 Chris Tapp 2012-05-10 20:44 ` Tom Zanussi 0 siblings, 1 reply; 10+ messages in thread From: Chris Tapp @ 2012-05-10 20:38 UTC (permalink / raw) To: Yocto Project I just tried to build 'crownbay' under Denzil but I got an error saying that xserver-xf86-dri-lite.inc could not be found. It looks as if new meta is available in the git repository. Is there a plan for 7.0.0 downloads to be available from the downloads page? Chris Tapp opensource@keylevel.com www.keylevel.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Using meta-intel with Denzil 2012-05-10 20:38 Using meta-intel with Denzil Chris Tapp @ 2012-05-10 20:44 ` Tom Zanussi 2012-05-10 20:52 ` Khem Raj 2012-05-10 20:54 ` Chris Tapp 0 siblings, 2 replies; 10+ messages in thread From: Tom Zanussi @ 2012-05-10 20:44 UTC (permalink / raw) To: Chris Tapp; +Cc: Yocto Project On Thu, 2012-05-10 at 21:38 +0100, Chris Tapp wrote: > I just tried to build 'crownbay' under Denzil but I got an error saying that xserver-xf86-dri-lite.inc could not be found. > > It looks as if new meta is available in the git repository. Is there a plan for 7.0.0 downloads to be available from the downloads page? > Yes, the plan these days is to release the meta-intel BSPs a few weeks or so following the poky release. We expect to have denzil BSP downloads available from the downloads directory in a couple weeks... Tom > Chris Tapp > > opensource@keylevel.com > www.keylevel.com > > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Using meta-intel with Denzil 2012-05-10 20:44 ` Tom Zanussi @ 2012-05-10 20:52 ` Khem Raj 2012-05-10 20:59 ` Tom Zanussi 2012-05-10 20:54 ` Chris Tapp 1 sibling, 1 reply; 10+ messages in thread From: Khem Raj @ 2012-05-10 20:52 UTC (permalink / raw) To: Tom Zanussi; +Cc: Yocto Project On Thu, May 10, 2012 at 1:44 PM, Tom Zanussi <tom.zanussi@intel.com> wrote: > On Thu, 2012-05-10 at 21:38 +0100, Chris Tapp wrote: >> I just tried to build 'crownbay' under Denzil but I got an error saying that xserver-xf86-dri-lite.inc could not be found. hold on and keep playing with qemu machines until meta-intel releases denzil compatible BSP layer which should be anytime soon. >> >> It looks as if new meta is available in the git repository. Is there a plan for 7.0.0 downloads to be available from the downloads page? >> > > Yes, the plan these days is to release the meta-intel BSPs a few weeks > or so following the poky release. We expect to have denzil BSP > downloads available from the downloads directory in a couple weeks... > > Tom > >> Chris Tapp >> >> opensource@keylevel.com >> www.keylevel.com >> >> >> >> _______________________________________________ >> yocto mailing list >> yocto@yoctoproject.org >> https://lists.yoctoproject.org/listinfo/yocto > > > _______________________________________________ > yocto mailing list > yocto@yoctoproject.org > https://lists.yoctoproject.org/listinfo/yocto ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Using meta-intel with Denzil 2012-05-10 20:52 ` Khem Raj @ 2012-05-10 20:59 ` Tom Zanussi 2012-05-10 21:01 ` Khem Raj 0 siblings, 1 reply; 10+ messages in thread From: Tom Zanussi @ 2012-05-10 20:59 UTC (permalink / raw) To: Khem Raj; +Cc: Yocto Project On Thu, 2012-05-10 at 13:52 -0700, Khem Raj wrote: > On Thu, May 10, 2012 at 1:44 PM, Tom Zanussi <tom.zanussi@intel.com> wrote: > > On Thu, 2012-05-10 at 21:38 +0100, Chris Tapp wrote: > >> I just tried to build 'crownbay' under Denzil but I got an error saying that xserver-xf86-dri-lite.inc could not be found. > > hold on and keep playing with qemu machines until meta-intel releases > denzil compatible BSP layer which should be anytime soon. > What's there in master now is compatible with denzil, so no need to do that. Tom > >> > >> It looks as if new meta is available in the git repository. Is there a plan for 7.0.0 downloads to be available from the downloads page? > >> > > > > Yes, the plan these days is to release the meta-intel BSPs a few weeks > > or so following the poky release. We expect to have denzil BSP > > downloads available from the downloads directory in a couple weeks... > > > > Tom > > > >> Chris Tapp > >> > >> opensource@keylevel.com > >> www.keylevel.com > >> > >> > >> > >> _______________________________________________ > >> yocto mailing list > >> yocto@yoctoproject.org > >> https://lists.yoctoproject.org/listinfo/yocto > > > > > > _______________________________________________ > > yocto mailing list > > yocto@yoctoproject.org > > https://lists.yoctoproject.org/listinfo/yocto ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Using meta-intel with Denzil 2012-05-10 20:59 ` Tom Zanussi @ 2012-05-10 21:01 ` Khem Raj 0 siblings, 0 replies; 10+ messages in thread From: Khem Raj @ 2012-05-10 21:01 UTC (permalink / raw) To: Tom Zanussi; +Cc: Yocto Project On Thu, May 10, 2012 at 1:59 PM, Tom Zanussi <tom.zanussi@intel.com> wrote: > > > What's there in master now is compatible with denzil, so no need to do > that. even better ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Using meta-intel with Denzil 2012-05-10 20:44 ` Tom Zanussi 2012-05-10 20:52 ` Khem Raj @ 2012-05-10 20:54 ` Chris Tapp 2012-05-10 21:01 ` Tom Zanussi 1 sibling, 1 reply; 10+ messages in thread From: Chris Tapp @ 2012-05-10 20:54 UTC (permalink / raw) To: Tom Zanussi; +Cc: Yocto Project On 10 May 2012, at 21:44, Tom Zanussi wrote: > On Thu, 2012-05-10 at 21:38 +0100, Chris Tapp wrote: >> I just tried to build 'crownbay' under Denzil but I got an error saying that xserver-xf86-dri-lite.inc could not be found. >> >> It looks as if new meta is available in the git repository. Is there a plan for 7.0.0 downloads to be available from the downloads page? >> > > Yes, the plan these days is to release the meta-intel BSPs a few weeks > or so following the poky release. We expect to have denzil BSP > downloads available from the downloads directory in a couple weeks... Thanks Tom. Is there any information produced for a release to explain what needs looking at to bring a BSP in line with the release? I found the above when I tried to bring something I'm working on in to Denzil. It would be really helpful if there was an easy way to find out what I need to consider ;-) Chris Tapp opensource@keylevel.com www.keylevel.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Using meta-intel with Denzil 2012-05-10 20:54 ` Chris Tapp @ 2012-05-10 21:01 ` Tom Zanussi 2012-05-10 21:07 ` Chris Tapp 0 siblings, 1 reply; 10+ messages in thread From: Tom Zanussi @ 2012-05-10 21:01 UTC (permalink / raw) To: Chris Tapp; +Cc: Yocto Project On Thu, 2012-05-10 at 21:54 +0100, Chris Tapp wrote: > On 10 May 2012, at 21:44, Tom Zanussi wrote: > > > On Thu, 2012-05-10 at 21:38 +0100, Chris Tapp wrote: > >> I just tried to build 'crownbay' under Denzil but I got an error saying that xserver-xf86-dri-lite.inc could not be found. > >> > >> It looks as if new meta is available in the git repository. Is there a plan for 7.0.0 downloads to be available from the downloads page? > >> > > > > Yes, the plan these days is to release the meta-intel BSPs a few weeks > > or so following the poky release. We expect to have denzil BSP > > downloads available from the downloads directory in a couple weeks... > > > Thanks Tom. > > Is there any information produced for a release to explain what needs looking at to bring a BSP in line with the release? > > I found the above when I tried to bring something I'm working on in to Denzil. It would be really helpful if there was an easy way to find out what I need to consider ;-) > I wish there were. ;-) I don't know any substitute for that kind of thing than looking at git history and trying to build. BTW, I don't know why you'd be seeing that xserver-xf86-dri-lite.inc error unless you had something out of date - the current master for crownbay works find for me with poky/denzil... Tom > Chris Tapp > > opensource@keylevel.com > www.keylevel.com > > > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Using meta-intel with Denzil 2012-05-10 21:01 ` Tom Zanussi @ 2012-05-10 21:07 ` Chris Tapp 2012-05-10 21:23 ` Tom Zanussi 0 siblings, 1 reply; 10+ messages in thread From: Chris Tapp @ 2012-05-10 21:07 UTC (permalink / raw) To: Tom Zanussi; +Cc: Yocto Project On 10 May 2012, at 22:01, Tom Zanussi wrote: > On Thu, 2012-05-10 at 21:54 +0100, Chris Tapp wrote: >> On 10 May 2012, at 21:44, Tom Zanussi wrote: >> >>> On Thu, 2012-05-10 at 21:38 +0100, Chris Tapp wrote: >>>> I just tried to build 'crownbay' under Denzil but I got an error saying that xserver-xf86-dri-lite.inc could not be found. >>>> >>>> It looks as if new meta is available in the git repository. Is there a plan for 7.0.0 downloads to be available from the downloads page? >>>> >>> >>> Yes, the plan these days is to release the meta-intel BSPs a few weeks >>> or so following the poky release. We expect to have denzil BSP >>> downloads available from the downloads directory in a couple weeks... >> >> >> Thanks Tom. >> >> Is there any information produced for a release to explain what needs looking at to bring a BSP in line with the release? >> >> I found the above when I tried to bring something I'm working on in to Denzil. It would be really helpful if there was an easy way to find out what I need to consider ;-) >> > > I wish there were. ;-) I don't know any substitute for that kind of > thing than looking at git history and trying to build. > > BTW, I don't know why you'd be seeing that xserver-xf86-dri-lite.inc > error unless you had something out of date - the current master for > crownbay works find for me with poky/denzil... I've got an embryonic BSP based on meta-intel from an older version (6.0.1). It currently 'lives' within meta-intel/mybsp. When it didn't build I tried crownbay as I always start by assuming I've got something wrong in my code... ;-) Chris Tapp opensource@keylevel.com www.keylevel.com ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Using meta-intel with Denzil 2012-05-10 21:07 ` Chris Tapp @ 2012-05-10 21:23 ` Tom Zanussi 2012-05-10 21:32 ` Chris Tapp 0 siblings, 1 reply; 10+ messages in thread From: Tom Zanussi @ 2012-05-10 21:23 UTC (permalink / raw) To: Chris Tapp; +Cc: Yocto Project On Thu, 2012-05-10 at 22:07 +0100, Chris Tapp wrote: > On 10 May 2012, at 22:01, Tom Zanussi wrote: > > > On Thu, 2012-05-10 at 21:54 +0100, Chris Tapp wrote: > >> On 10 May 2012, at 21:44, Tom Zanussi wrote: > >> > >>> On Thu, 2012-05-10 at 21:38 +0100, Chris Tapp wrote: > >>>> I just tried to build 'crownbay' under Denzil but I got an error saying that xserver-xf86-dri-lite.inc could not be found. > >>>> > >>>> It looks as if new meta is available in the git repository. Is there a plan for 7.0.0 downloads to be available from the downloads page? > >>>> > >>> > >>> Yes, the plan these days is to release the meta-intel BSPs a few weeks > >>> or so following the poky release. We expect to have denzil BSP > >>> downloads available from the downloads directory in a couple weeks... > >> > >> > >> Thanks Tom. > >> > >> Is there any information produced for a release to explain what needs looking at to bring a BSP in line with the release? > >> > >> I found the above when I tried to bring something I'm working on in to Denzil. It would be really helpful if there was an easy way to find out what I need to consider ;-) > >> > > > > I wish there were. ;-) I don't know any substitute for that kind of > > thing than looking at git history and trying to build. > > > > BTW, I don't know why you'd be seeing that xserver-xf86-dri-lite.inc > > error unless you had something out of date - the current master for > > crownbay works find for me with poky/denzil... > > > I've got an embryonic BSP based on meta-intel from an older version (6.0.1). It currently 'lives' within meta-intel/mybsp. When it didn't build I tried crownbay as I always start by assuming I've got something wrong in my code... ;-) > Oh, I guess you must have been trying the edison crownbay with denzil which has this and won't work with denzil: meta-crownbay/conf/machine/crownbay.conf:PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xf86-dri-lite" meta-crownbay/conf/machine/crownbay.conf:PREFERRED_PROVIDER_virtual/xserver-xf86 ?= "xserver-xf86-dri-lite" meta-crownbay/conf/machine/crownbay.conf:XSERVER ?= "xserver-xf86-dri-lite \ meta-crownbay/conf/machine/crownbay.conf:PREFERRED_VERSION_xserver-xf86-dri-lite ?= "1.9.3" You really should be looking at the current crownbay BSP in master - there have been a lot of changes in this (matching changes for the X overhaul in oe-core IIRC) and other areas since then... Tom > Chris Tapp > > opensource@keylevel.com > www.keylevel.com > > > ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Using meta-intel with Denzil 2012-05-10 21:23 ` Tom Zanussi @ 2012-05-10 21:32 ` Chris Tapp 0 siblings, 0 replies; 10+ messages in thread From: Chris Tapp @ 2012-05-10 21:32 UTC (permalink / raw) To: Tom Zanussi; +Cc: Yocto Project On 10 May 2012, at 22:23, Tom Zanussi wrote: > On Thu, 2012-05-10 at 22:07 +0100, Chris Tapp wrote: >> On 10 May 2012, at 22:01, Tom Zanussi wrote: >> >>> On Thu, 2012-05-10 at 21:54 +0100, Chris Tapp wrote: >>>> On 10 May 2012, at 21:44, Tom Zanussi wrote: >>>> >>>>> On Thu, 2012-05-10 at 21:38 +0100, Chris Tapp wrote: >>>>>> I just tried to build 'crownbay' under Denzil but I got an error saying that xserver-xf86-dri-lite.inc could not be found. >>>>>> >>>>>> It looks as if new meta is available in the git repository. Is there a plan for 7.0.0 downloads to be available from the downloads page? >>>>>> >>>>> >>>>> Yes, the plan these days is to release the meta-intel BSPs a few weeks >>>>> or so following the poky release. We expect to have denzil BSP >>>>> downloads available from the downloads directory in a couple weeks... >>>> >>>> >>>> Thanks Tom. >>>> >>>> Is there any information produced for a release to explain what needs looking at to bring a BSP in line with the release? >>>> >>>> I found the above when I tried to bring something I'm working on in to Denzil. It would be really helpful if there was an easy way to find out what I need to consider ;-) >>>> >>> >>> I wish there were. ;-) I don't know any substitute for that kind of >>> thing than looking at git history and trying to build. >>> >>> BTW, I don't know why you'd be seeing that xserver-xf86-dri-lite.inc >>> error unless you had something out of date - the current master for >>> crownbay works find for me with poky/denzil... >> >> >> I've got an embryonic BSP based on meta-intel from an older version (6.0.1). It currently 'lives' within meta-intel/mybsp. When it didn't build I tried crownbay as I always start by assuming I've got something wrong in my code... ;-) >> > > Oh, I guess you must have been trying the edison crownbay with denzil > which has this and won't work with denzil: > > meta-crownbay/conf/machine/crownbay.conf:PREFERRED_PROVIDER_virtual/xserver ?= "xserver-xf86-dri-lite" > meta-crownbay/conf/machine/crownbay.conf:PREFERRED_PROVIDER_virtual/xserver-xf86 ?= "xserver-xf86-dri-lite" > meta-crownbay/conf/machine/crownbay.conf:XSERVER ?= > "xserver-xf86-dri-lite \ > meta-crownbay/conf/machine/crownbay.conf:PREFERRED_VERSION_xserver-xf86-dri-lite ?= "1.9.3" > > You really should be looking at the current crownbay BSP in master - > there have been a lot of changes in this (matching changes for the X > overhaul in oe-core IIRC) and other areas since then... Already there ;-) Chris Tapp opensource@keylevel.com www.keylevel.com ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2012-05-10 21:32 UTC | newest] Thread overview: 10+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2012-05-10 20:38 Using meta-intel with Denzil Chris Tapp 2012-05-10 20:44 ` Tom Zanussi 2012-05-10 20:52 ` Khem Raj 2012-05-10 20:59 ` Tom Zanussi 2012-05-10 21:01 ` Khem Raj 2012-05-10 20:54 ` Chris Tapp 2012-05-10 21:01 ` Tom Zanussi 2012-05-10 21:07 ` Chris Tapp 2012-05-10 21:23 ` Tom Zanussi 2012-05-10 21:32 ` Chris Tapp
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.