From: Jia Liu <proljc@gmail.com>
To: qemu-devel@nongnu.org
Subject: [Qemu-devel] [PATCH v2 05/17] Openrisc: add interrupt support
Date: Sun, 27 May 2012 13:32:47 +0800 [thread overview]
Message-ID: <1338096779-30821-6-git-send-email-proljc@gmail.com> (raw)
In-Reply-To: <1338096779-30821-1-git-send-email-proljc@gmail.com>
add openrisc interrupt support.
Signed-off-by: Jia Liu <proljc@gmail.com>
---
Makefile.target | 2 +-
cpu-exec.c | 13 ++++++++++
target-openrisc/cpu.h | 4 +++
target-openrisc/helper.h | 25 +++++++++++++++++++
target-openrisc/intrpt.c | 42 +++++++++++++++++++++++++++++++
target-openrisc/intrpt_helper.c | 52 +++++++++++++++++++++++++++++++++++++++
6 files changed, 137 insertions(+), 1 deletion(-)
create mode 100644 target-openrisc/helper.h
create mode 100644 target-openrisc/intrpt_helper.c
diff --git a/Makefile.target b/Makefile.target
index 0efabd2..47836c6 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -101,7 +101,7 @@ endif
libobj-$(TARGET_SPARC) += int32_helper.o
libobj-$(TARGET_SPARC64) += int64_helper.o
libobj-$(TARGET_ALPHA) += int_helper.o fpu_helper.o sys_helper.o mem_helper.o
-libobj-$(TARGET_OPENRISC) += intrpt.o mmu.o mmu_helper.o
+libobj-$(TARGET_OPENRISC) += intrpt.o intrpt_helper.o mmu.o mmu_helper.o
libobj-y += disas.o
libobj-$(CONFIG_TCI_DIS) += tci-dis.o
diff --git a/cpu-exec.c b/cpu-exec.c
index ba10db1..ee9afd7 100644
--- a/cpu-exec.c
+++ b/cpu-exec.c
@@ -375,6 +375,19 @@ int cpu_exec(CPUArchState *env)
do_interrupt(env);
next_tb = 0;
}
+#elif defined(TARGET_OPENRISC)
+ {
+ int idx = -1;
+ if ((interrupt_request & CPU_INTERRUPT_HARD)
+ && (env->sr & SR_IEE)) {
+ idx = EXCP_INT;
+ }
+ if (idx >= 0) {
+ env->exception_index = idx;
+ do_interrupt(env);
+ next_tb = 0;
+ }
+ }
#elif defined(TARGET_SPARC)
if (interrupt_request & CPU_INTERRUPT_HARD) {
if (cpu_interrupts_enabled(env) &&
diff --git a/target-openrisc/cpu.h b/target-openrisc/cpu.h
index 779c889..977dd06 100644
--- a/target-openrisc/cpu.h
+++ b/target-openrisc/cpu.h
@@ -58,6 +58,9 @@ struct CPUOpenriscState;
/* Internel flags, delay slot flag */
#define D_FLAG 1
+#define NR_IRQS 32
+#define PIC_MASK 0xFFFFFFFF
+
/* Verison Register */
#define SPR_VR 0x12000001
#define SPR_CPUCFGR 0x12000001
@@ -178,6 +181,7 @@ struct CPUOpenriscState {
target_ulong epcr; /* Exception PC register */
target_ulong eear; /* Exception EA register */
uint32_t esr; /* Exception supervisor register */
+ void *irq[32]; /* Interrupt irq input */
#if !defined(CONFIG_USER_ONLY)
tlb_entry itlb[ITLB_WAYS][ITLB_SIZE];
tlb_entry dtlb[DTLB_WAYS][DTLB_SIZE];
diff --git a/target-openrisc/helper.h b/target-openrisc/helper.h
new file mode 100644
index 0000000..66cd05c
--- /dev/null
+++ b/target-openrisc/helper.h
@@ -0,0 +1,25 @@
+/*
+ * Openrisc helper defines
+ *
+ * Copyright (c) 2011-2012 Jia Liu <proljc@gmail.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "def-helper.h"
+
+/* interrupt */
+DEF_HELPER_FLAGS_1(rfe, 0, void, env)
+
+#include "def-helper.h"
diff --git a/target-openrisc/intrpt.c b/target-openrisc/intrpt.c
index a77116f..7272458 100644
--- a/target-openrisc/intrpt.c
+++ b/target-openrisc/intrpt.c
@@ -27,4 +27,46 @@
void do_interrupt(CPUOpenriscState *env)
{
+#if !defined(CONFIG_USER_ONLY)
+ if (env->flags & D_FLAG) { /* Delay Slot insn */
+ env->flags &= ~D_FLAG;
+ env->sr |= SR_DSX;
+ if (env->exception_index == EXCP_TICK ||
+ env->exception_index == EXCP_INT ||
+ env->exception_index == EXCP_SYSCALL ||
+ env->exception_index == EXCP_FPE) {
+ env->epcr = env->jmp_pc;
+ } else {
+ env->epcr = env->pc - 4;
+ }
+ } else {
+ if (env->exception_index == EXCP_TICK ||
+ env->exception_index == EXCP_INT ||
+ env->exception_index == EXCP_SYSCALL ||
+ env->exception_index == EXCP_FPE) {
+ env->epcr = env->npc;
+ } else {
+ env->epcr = env->pc;
+ }
+ }
+
+ tlb_flush(env, 1);
+
+ env->esr = env->sr;
+ env->sr &= ~SR_DME;
+ env->sr &= ~SR_IME;
+ env->sr |= SR_SM;
+ env->sr &= ~SR_IEE;
+ env->sr &= ~SR_TEE;
+ env->map_address_data = &get_phys_nommu;
+ env->map_address_code = &get_phys_nommu;
+
+ if (env->exception_index > 0 && env->exception_index < EXCP_NR) {
+ env->pc = (env->exception_index << 8);
+ } else {
+ cpu_abort(env, "Unhandled exception 0x%x\n", env->exception_index);
+ }
+#endif
+
+ env->exception_index = -1;
}
diff --git a/target-openrisc/intrpt_helper.c b/target-openrisc/intrpt_helper.c
new file mode 100644
index 0000000..f14f0ce
--- /dev/null
+++ b/target-openrisc/intrpt_helper.c
@@ -0,0 +1,52 @@
+/*
+ * Openrisc interrupt helper routines
+ *
+ * Copyright (c) 2011-2012 Jia Liu <proljc@gmail.com>
+ * Feng Gao <gf91597@gmail.com>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "cpu.h"
+#include "helper.h"
+
+void HELPER(rfe)(CPUOpenriscState *env)
+{
+#if !defined(CONFIG_USER_ONLY)
+ int need_flush_tlb = (env->sr & (SR_SM | SR_IME | SR_DME)) ^
+ (env->esr & (SR_SM | SR_IME | SR_DME));
+#endif
+ env->pc = env->epcr;
+ env->npc = env->epcr;
+ env->sr = env->esr;
+
+#if !defined(CONFIG_USER_ONLY)
+ if (env->sr & SR_DME) {
+ env->map_address_data = &get_phys_data;
+ } else {
+ env->map_address_data = &get_phys_nommu;
+ }
+
+ if (env->sr & SR_IME) {
+ env->map_address_code = &get_phys_code;
+ } else {
+ env->map_address_code = &get_phys_nommu;
+ }
+
+ if (need_flush_tlb) {
+ tlb_flush(env, 1);
+ }
+#endif
+ env->interrupt_request |= CPU_INTERRUPT_EXITTB;
+}
--
1.7.9.5
next prev parent reply other threads:[~2012-05-27 5:34 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-05-27 5:32 [Qemu-devel] [PATCH v2 00/17] Qemu Openrisc support Jia Liu
2012-05-27 5:32 ` [Qemu-devel] [PATCH v2 01/17] Openrisc: add target stubs Jia Liu
2012-05-27 12:44 ` Andreas Färber
2012-05-27 5:32 ` [Qemu-devel] [PATCH v2 02/17] Openrisc: add cpu QOM implement Jia Liu
2012-05-27 5:32 ` [Qemu-devel] [PATCH v2 03/17] Openrisc: add basic machine Jia Liu
2012-05-27 5:32 ` [Qemu-devel] [PATCH v2 04/17] Openrisc: add MMU support Jia Liu
2012-05-27 5:32 ` Jia Liu [this message]
2012-05-27 5:32 ` [Qemu-devel] [PATCH v2 06/17] Openrisc: add exception support Jia Liu
2012-05-27 5:32 ` [Qemu-devel] [PATCH v2 07/17] Openrisc: add int instruction helpers Jia Liu
2012-05-27 5:32 ` [Qemu-devel] [PATCH v2 08/17] Openrisc: add float " Jia Liu
2012-05-27 5:32 ` [Qemu-devel] [PATCH v2 09/17] Openrisc: add instruction translation routines Jia Liu
2012-05-28 11:38 ` Max Filippov
2012-05-27 5:32 ` [Qemu-devel] [PATCH v2 10/17] Openrisc: add Programmable Interrupt Controller Jia Liu
2012-05-27 5:32 ` [Qemu-devel] [PATCH v2 11/17] Openrisc: add a timer Jia Liu
2012-05-27 5:32 ` [Qemu-devel] [PATCH v2 12/17] Openrisc: add a simulator board Jia Liu
2012-05-27 5:32 ` [Qemu-devel] [PATCH v2 13/17] Openrisc: add system instruction helpers Jia Liu
2012-05-27 5:32 ` [Qemu-devel] [PATCH v2 14/17] Openrisc: add gdb stub support Jia Liu
2012-05-27 5:32 ` [Qemu-devel] [PATCH v2 15/17] Openrisc: add linux syscall, signal and termbits Jia Liu
2012-05-27 5:32 ` [Qemu-devel] [PATCH v2 16/17] Openrisc: add linux user support Jia Liu
2012-05-27 5:32 ` [Qemu-devel] [PATCH v2 17/17] Openrisc: add testcases Jia Liu
2012-05-27 6:01 ` [Qemu-devel] [PATCH v2 00/17] Qemu Openrisc support Stefan Weil
2012-05-27 6:10 ` Jia Liu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1338096779-30821-6-git-send-email-proljc@gmail.com \
--to=proljc@gmail.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.