All of lore.kernel.org
 help / color / mirror / Atom feed
From: Paulo Zanoni <przanoni@gmail.com>
To: intel-gfx@lists.freedesktop.org
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Subject: [PATCH 06/14] drm/i915: explicitly disable the DIPs we're not using
Date: Mon, 28 May 2012 16:42:53 -0300	[thread overview]
Message-ID: <1338234182-5021-7-git-send-email-przanoni@gmail.com> (raw)
In-Reply-To: <1338234182-5021-1-git-send-email-przanoni@gmail.com>

From: Paulo Zanoni <paulo.r.zanoni@intel.com>

>From this point on, the 'set_infoframe' functions always set the DIP
registers to a known state, so anything done will always be undone at
the modeset.

Signed-off-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
---
 drivers/gpu/drm/i915/i915_reg.h   |    6 ++++++
 drivers/gpu/drm/i915/intel_hdmi.c |   13 +++++++++++++
 2 files changed, 19 insertions(+)

diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 0f45a18..1855ac7 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -1717,8 +1717,10 @@
 #define   VIDEO_DIP_PORT_C		(2 << 29)
 #define   VIDEO_DIP_PORT_D		(3 << 29)
 #define   VIDEO_DIP_PORT_MASK		(3 << 29)
+#define   VIDEO_DIP_ENABLE_GCP		(1 << 25)
 #define   VIDEO_DIP_ENABLE_AVI		(1 << 21)
 #define   VIDEO_DIP_ENABLE_VENDOR	(2 << 21)
+#define   VIDEO_DIP_ENABLE_GAMUT	(4 << 21)
 #define   VIDEO_DIP_ENABLE_SPD		(8 << 21)
 #define   VIDEO_DIP_SELECT_AVI		(0 << 19)
 #define   VIDEO_DIP_SELECT_VENDOR	(1 << 19)
@@ -1729,7 +1731,11 @@
 #define   VIDEO_DIP_FREQ_2VSYNC		(2 << 16)
 #define   VIDEO_DIP_FREQ_MASK		(3 << 16)
 /* HSW and later: */
+#define   VIDEO_DIP_ENABLE_VSC_HSW	(1 << 20)
+#define   VIDEO_DIP_ENABLE_GCP_HSW	(1 << 16)
 #define   VIDEO_DIP_ENABLE_AVI_HSW	(1 << 12)
+#define   VIDEO_DIP_ENABLE_VS_HSW	(1 << 8)
+#define   VIDEO_DIP_ENABLE_GMP_HSW	(1 << 4)
 #define   VIDEO_DIP_ENABLE_SPD_HSW	(1 << 0)
 
 /* Panel power sequencing */
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 614d83f..620b0db 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -350,6 +350,7 @@ static void g4x_set_infoframes(struct drm_encoder *encoder,
 	}
 
 	val |= VIDEO_DIP_ENABLE;
+	val &= ~VIDEO_DIP_ENABLE_VENDOR;
 
 	I915_WRITE(reg, val);
 
@@ -393,6 +394,8 @@ static void ibx_set_infoframes(struct drm_encoder *encoder,
 	}
 
 	val |= VIDEO_DIP_ENABLE;
+	val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
+		 VIDEO_DIP_ENABLE_GCP);
 
 	I915_WRITE(reg, val);
 
@@ -422,6 +425,8 @@ static void cpt_set_infoframes(struct drm_encoder *encoder,
 
 	/* Set both together, unset both together: see the spec. */
 	val |= VIDEO_DIP_ENABLE | VIDEO_DIP_ENABLE_AVI;
+	val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
+		 VIDEO_DIP_ENABLE_GCP);
 
 	I915_WRITE(reg, val);
 
@@ -450,6 +455,8 @@ static void vlv_set_infoframes(struct drm_encoder *encoder,
 	}
 
 	val |= VIDEO_DIP_ENABLE;
+	val &= ~(VIDEO_DIP_ENABLE_VENDOR | VIDEO_DIP_ENABLE_GAMUT |
+		 VIDEO_DIP_ENABLE_GCP);
 
 	I915_WRITE(reg, val);
 
@@ -464,12 +471,18 @@ static void hsw_set_infoframes(struct drm_encoder *encoder,
 	struct intel_crtc *intel_crtc = to_intel_crtc(encoder->crtc);
 	struct intel_hdmi *intel_hdmi = enc_to_intel_hdmi(encoder);
 	u32 reg = HSW_TVIDEO_DIP_CTL(intel_crtc->pipe);
+	u32 val = I915_READ(reg);
 
 	if (!intel_hdmi->has_hdmi_sink) {
 		I915_WRITE(reg, 0);
 		return;
 	}
 
+	val &= ~(VIDEO_DIP_ENABLE_VSC_HSW | VIDEO_DIP_ENABLE_GCP_HSW |
+		 VIDEO_DIP_ENABLE_VS_HSW | VIDEO_DIP_ENABLE_GMP_HSW);
+
+	I915_WRITE(reg, val);
+
 	intel_hdmi_set_avi_infoframe(encoder, adjusted_mode);
 	intel_hdmi_set_spd_infoframe(encoder);
 }
-- 
1.7.10

  parent reply	other threads:[~2012-05-28 19:43 UTC|newest]

Thread overview: 19+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-05-28 19:42 [PATCH 00/14] More HDMI fixes V2 Paulo Zanoni
2012-05-28 19:42 ` [PATCH 01/14] drm/i915: add set_infoframes to struct intel_hdmi Paulo Zanoni
2012-05-28 19:42 ` [PATCH 02/14] drm/i915: properly alternate between DVI and HDMI Paulo Zanoni
2012-05-28 19:53   ` Chris Wilson
2012-05-28 20:04     ` Paulo Zanoni
2012-05-28 19:42 ` [PATCH 03/14] drm/i915: only set the HDMI port on the DIP once Paulo Zanoni
2012-05-28 19:42 ` [PATCH 04/14] drm/i915: enable DIP before enabling each InfoFrame Paulo Zanoni
2012-05-28 19:42 ` [PATCH 05/14] drm/i915: don't wait for vblank while writing InfoFrames Paulo Zanoni
2012-05-28 19:42 ` Paulo Zanoni [this message]
2012-05-28 19:42 ` [PATCH 07/14] drm/i915: disable DIP while changing the port Paulo Zanoni
2012-05-28 19:42 ` [PATCH 08/14] drm/i915: don't write 0 to DIP control at HDMI init Paulo Zanoni
2012-05-28 19:42 ` [PATCH 09/14] drm/i915: don't set SDVO_BORDER_ENABLE when we're HDMI Paulo Zanoni
2012-05-28 19:42 ` [PATCH 10/14] drm/i915: rename sdvox_reg to hdmi_reg on HDMI context Paulo Zanoni
2012-05-28 19:42 ` [PATCH 11/14] drm/i915: remove comment about HSW HDMI DIPs Paulo Zanoni
2012-05-28 19:42 ` [PATCH 12/14] drm/i915: clarify confusion between HDMI and SDVO registers Paulo Zanoni
2012-05-28 19:43 ` [PATCH 13/14] drm/i915: add some barriers when changing DIPs Paulo Zanoni
2012-05-30 21:08   ` Daniel Vetter
2012-05-28 19:43 ` [PATCH 14/14] drm/i915: make sure HDMI port is disabled inside set_infoframes Paulo Zanoni
2012-05-30 12:15   ` Daniel Vetter

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1338234182-5021-7-git-send-email-przanoni@gmail.com \
    --to=przanoni@gmail.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=paulo.r.zanoni@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.