From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Anuj Aggarwal <anuj.aggarwal@ti.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>
Subject: [PATCH RFT 1/3] regulator: tps65023: Convert to regulator_list_voltage_table
Date: Tue, 19 Jun 2012 17:12:18 +0800 [thread overview]
Message-ID: <1340097138.28289.1.camel@phoenix> (raw)
In current mapping table settings, min_uV/max_uV are always
equal to volt_table[0] and volt_table[table_len -1].
Thus remove min_uV and max_uV from struct tps_info.
The table based mapping with table_len == 1 means fixed voltage.
So we don't need fixed flag to differentiate if it is fixed or not.
This patch adds DCDC_FIXED_3300000_VSEL_table and DCDC_FIXED_1800000_VSEL_table
for fixed voltage cases. So we can convert tps65023_dcdc_ops to
regulator_list_voltage_table. This makes the code simpler.
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/tps65023-regulator.c | 153 ++++++++++----------------------
1 file changed, 49 insertions(+), 104 deletions(-)
diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c
index 6fab428..332cbc5 100644
--- a/drivers/regulator/tps65023-regulator.c
+++ b/drivers/regulator/tps65023-regulator.c
@@ -91,48 +91,53 @@
#define TPS65023_MAX_REG_ID TPS65023_LDO_2
/* Supported voltage values for regulators */
-static const u16 VCORE_VSEL_table[] = {
- 800, 825, 850, 875,
- 900, 925, 950, 975,
- 1000, 1025, 1050, 1075,
- 1100, 1125, 1150, 1175,
- 1200, 1225, 1250, 1275,
- 1300, 1325, 1350, 1375,
- 1400, 1425, 1450, 1475,
- 1500, 1525, 1550, 1600,
+static const unsigned int VCORE_VSEL_table[] = {
+ 800000, 825000, 850000, 875000,
+ 900000, 925000, 950000, 975000,
+ 1000000, 1025000, 1050000, 1075000,
+ 1100000, 1125000, 1150000, 1175000,
+ 1200000, 1225000, 1250000, 1275000,
+ 1300000, 1325000, 1350000, 1375000,
+ 1400000, 1425000, 1450000, 1475000,
+ 1500000, 1525000, 1550000, 1600000,
+};
+
+static const unsigned int DCDC_FIXED_3300000_VSEL_table[] = {
+ 3300000,
+};
+
+static const unsigned int DCDC_FIXED_1800000_VSEL_table[] = {
+ 1800000,
};
/* Supported voltage values for LDO regulators for tps65020 */
-static const u16 TPS65020_LDO1_VSEL_table[] = {
- 1000, 1050, 1100, 1300,
- 1800, 2500, 3000, 3300,
+static const unsigned int TPS65020_LDO1_VSEL_table[] = {
+ 1000000, 1050000, 1100000, 1300000,
+ 1800000, 2500000, 3000000, 3300000,
};
-static const u16 TPS65020_LDO2_VSEL_table[] = {
- 1000, 1050, 1100, 1300,
- 1800, 2500, 3000, 3300,
+static const unsigned int TPS65020_LDO2_VSEL_table[] = {
+ 1000000, 1050000, 1100000, 1300000,
+ 1800000, 2500000, 3000000, 3300000,
};
/* Supported voltage values for LDO regulators
* for tps65021 and tps65023 */
-static const u16 TPS65023_LDO1_VSEL_table[] = {
- 1000, 1100, 1300, 1800,
- 2200, 2600, 2800, 3150,
+static const unsigned int TPS65023_LDO1_VSEL_table[] = {
+ 1000000, 1100000, 1300000, 1800000,
+ 2200000, 2600000, 2800000, 3150000,
};
-static const u16 TPS65023_LDO2_VSEL_table[] = {
- 1050, 1200, 1300, 1800,
- 2500, 2800, 3000, 3300,
+static const unsigned int TPS65023_LDO2_VSEL_table[] = {
+ 1050000, 1200000, 1300000, 1800000,
+ 2500000, 2800000, 3000000, 3300000,
};
/* Regulator specific details */
struct tps_info {
const char *name;
- unsigned min_uV;
- unsigned max_uV;
- bool fixed;
u8 table_len;
- const u16 *table;
+ const unsigned int *table;
};
/* PMIC details */
@@ -164,9 +169,9 @@ static int tps65023_dcdc_get_voltage(struct regulator_dev *dev)
if (ret != 0)
return ret;
data &= (tps->info[dcdc]->table_len - 1);
- return tps->info[dcdc]->table[data] * 1000;
+ return tps->info[dcdc]->table[data];
} else
- return tps->info[dcdc]->min_uV;
+ return tps->info[dcdc]->table[0];
}
static int tps65023_dcdc_set_voltage_sel(struct regulator_dev *dev,
@@ -208,7 +213,7 @@ static int tps65023_ldo_get_voltage(struct regulator_dev *dev)
data >>= (TPS65023_LDO_CTRL_LDOx_SHIFT(ldo - TPS65023_LDO_1));
data &= (tps->info[ldo]->table_len - 1);
- return tps->info[ldo]->table[data] * 1000;
+ return tps->info[ldo]->table[data];
}
static int tps65023_ldo_set_voltage_sel(struct regulator_dev *dev,
@@ -222,39 +227,6 @@ static int tps65023_ldo_set_voltage_sel(struct regulator_dev *dev,
selector << TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_index));
}
-static int tps65023_dcdc_list_voltage(struct regulator_dev *dev,
- unsigned selector)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int dcdc = rdev_get_id(dev);
-
- if (dcdc < TPS65023_DCDC_1 || dcdc > TPS65023_DCDC_3)
- return -EINVAL;
-
- if (dcdc == tps->core_regulator) {
- if (selector >= tps->info[dcdc]->table_len)
- return -EINVAL;
- else
- return tps->info[dcdc]->table[selector] * 1000;
- } else
- return tps->info[dcdc]->min_uV;
-}
-
-static int tps65023_ldo_list_voltage(struct regulator_dev *dev,
- unsigned selector)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int ldo = rdev_get_id(dev);
-
- if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2)
- return -EINVAL;
-
- if (selector >= tps->info[ldo]->table_len)
- return -EINVAL;
- else
- return tps->info[ldo]->table[selector] * 1000;
-}
-
/* Operations permitted on VDCDCx */
static struct regulator_ops tps65023_dcdc_ops = {
.is_enabled = regulator_is_enabled_regmap,
@@ -262,7 +234,7 @@ static struct regulator_ops tps65023_dcdc_ops = {
.disable = regulator_disable_regmap,
.get_voltage = tps65023_dcdc_get_voltage,
.set_voltage_sel = tps65023_dcdc_set_voltage_sel,
- .list_voltage = tps65023_dcdc_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
};
/* Operations permitted on LDOx */
@@ -272,7 +244,7 @@ static struct regulator_ops tps65023_ldo_ops = {
.disable = regulator_disable_regmap,
.get_voltage = tps65023_ldo_get_voltage,
.set_voltage_sel = tps65023_ldo_set_voltage_sel,
- .list_voltage = tps65023_ldo_list_voltage,
+ .list_voltage = regulator_list_voltage_table,
};
static struct regmap_config tps65023_regmap_config = {
@@ -324,10 +296,8 @@ static int __devinit tps_65023_probe(struct i2c_client *client,
tps->desc[i].name = info->name;
tps->desc[i].id = i;
- if (info->fixed)
- tps->desc[i].n_voltages = 1;
- else
- tps->desc[i].n_voltages = info->table_len;
+ tps->desc[i].n_voltages = info->table_len;
+ tps->desc[i].volt_table = info->table;
tps->desc[i].ops = (i > TPS65023_DCDC_3 ?
&tps65023_ldo_ops : &tps65023_dcdc_ops);
tps->desc[i].type = REGULATOR_VOLTAGE;
@@ -387,35 +357,26 @@ static int __devexit tps_65023_remove(struct i2c_client *client)
static const struct tps_info tps65020_regs[] = {
{
.name = "VDCDC1",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .fixed = 1,
+ .table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table),
+ .table = DCDC_FIXED_3300000_VSEL_table,
},
{
.name = "VDCDC2",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .fixed = 1,
+ .table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table),
+ .table = DCDC_FIXED_1800000_VSEL_table,
},
{
.name = "VDCDC3",
- .min_uV = 800000,
- .max_uV = 1600000,
.table_len = ARRAY_SIZE(VCORE_VSEL_table),
.table = VCORE_VSEL_table,
},
-
{
.name = "LDO1",
- .min_uV = 1000000,
- .max_uV = 3150000,
.table_len = ARRAY_SIZE(TPS65020_LDO1_VSEL_table),
.table = TPS65020_LDO1_VSEL_table,
},
{
.name = "LDO2",
- .min_uV = 1050000,
- .max_uV = 3300000,
.table_len = ARRAY_SIZE(TPS65020_LDO2_VSEL_table),
.table = TPS65020_LDO2_VSEL_table,
},
@@ -424,34 +385,26 @@ static const struct tps_info tps65020_regs[] = {
static const struct tps_info tps65021_regs[] = {
{
.name = "VDCDC1",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .fixed = 1,
+ .table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table),
+ .table = DCDC_FIXED_3300000_VSEL_table,
},
{
.name = "VDCDC2",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .fixed = 1,
+ .table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table),
+ .table = DCDC_FIXED_1800000_VSEL_table,
},
{
.name = "VDCDC3",
- .min_uV = 800000,
- .max_uV = 1600000,
.table_len = ARRAY_SIZE(VCORE_VSEL_table),
.table = VCORE_VSEL_table,
},
{
.name = "LDO1",
- .min_uV = 1000000,
- .max_uV = 3150000,
.table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
.table = TPS65023_LDO1_VSEL_table,
},
{
.name = "LDO2",
- .min_uV = 1050000,
- .max_uV = 3300000,
.table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
.table = TPS65023_LDO2_VSEL_table,
},
@@ -460,34 +413,26 @@ static const struct tps_info tps65021_regs[] = {
static const struct tps_info tps65023_regs[] = {
{
.name = "VDCDC1",
- .min_uV = 800000,
- .max_uV = 1600000,
.table_len = ARRAY_SIZE(VCORE_VSEL_table),
.table = VCORE_VSEL_table,
},
{
.name = "VDCDC2",
- .min_uV = 3300000,
- .max_uV = 3300000,
- .fixed = 1,
+ .table_len = ARRAY_SIZE(DCDC_FIXED_3300000_VSEL_table),
+ .table = DCDC_FIXED_3300000_VSEL_table,
},
{
.name = "VDCDC3",
- .min_uV = 1800000,
- .max_uV = 1800000,
- .fixed = 1,
+ .table_len = ARRAY_SIZE(DCDC_FIXED_1800000_VSEL_table),
+ .table = DCDC_FIXED_1800000_VSEL_table,
},
{
.name = "LDO1",
- .min_uV = 1000000,
- .max_uV = 3150000,
.table_len = ARRAY_SIZE(TPS65023_LDO1_VSEL_table),
.table = TPS65023_LDO1_VSEL_table,
},
{
.name = "LDO2",
- .min_uV = 1050000,
- .max_uV = 3300000,
.table_len = ARRAY_SIZE(TPS65023_LDO2_VSEL_table),
.table = TPS65023_LDO2_VSEL_table,
},
--
1.7.9.5
next reply other threads:[~2012-06-19 9:12 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-19 9:12 Axel Lin [this message]
2012-06-19 9:13 ` [PATCH RFT 2/3] regulator: tps65023: Convert to get_voltage_sel Axel Lin
2012-06-19 11:08 ` Mark Brown
2012-06-19 9:14 ` [PATCH RFT 3/3] regulator: tps65023: Convert tps65023_ldo_ops to regulator_[get|set]_voltage_sel_regmap Axel Lin
2012-06-19 11:14 ` Mark Brown
2012-06-19 11:34 ` Mark Brown
2012-06-19 11:08 ` [PATCH RFT 1/3] regulator: tps65023: Convert to regulator_list_voltage_table Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340097138.28289.1.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=anuj.aggarwal@ti.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.