From: Axel Lin <axel.lin@gmail.com>
To: linux-kernel@vger.kernel.org
Cc: Anuj Aggarwal <anuj.aggarwal@ti.com>,
Mark Brown <broonie@opensource.wolfsonmicro.com>,
Liam Girdwood <lrg@ti.com>
Subject: [PATCH RFT 3/3] regulator: tps65023: Convert tps65023_ldo_ops to regulator_[get|set]_voltage_sel_regmap
Date: Tue, 19 Jun 2012 17:14:31 +0800 [thread overview]
Message-ID: <1340097271.28289.4.camel@phoenix> (raw)
In-Reply-To: <1340097138.28289.1.camel@phoenix>
Signed-off-by: Axel Lin <axel.lin@gmail.com>
---
drivers/regulator/tps65023-regulator.c | 51 ++++++++------------------------
1 file changed, 13 insertions(+), 38 deletions(-)
diff --git a/drivers/regulator/tps65023-regulator.c b/drivers/regulator/tps65023-regulator.c
index eacff95..5f3f60a 100644
--- a/drivers/regulator/tps65023-regulator.c
+++ b/drivers/regulator/tps65023-regulator.c
@@ -69,10 +69,6 @@
#define TPS65023_REG_CTRL2_DCDC1 BIT(1)
#define TPS65023_REG_CTRL2_DCDC3 BIT(0)
-/* LDO_CTRL bitfields */
-#define TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_id) ((ldo_id)*4)
-#define TPS65023_LDO_CTRL_LDOx_MASK(ldo_id) (0x07 << ((ldo_id)*4))
-
/* Number of step-down converters available */
#define TPS65023_NUM_DCDC 3
/* Number of LDO voltage regulators available */
@@ -198,35 +194,6 @@ out:
return ret;
}
-static int tps65023_ldo_get_voltage_sel(struct regulator_dev *dev)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int data, ldo = rdev_get_id(dev);
- int ret;
-
- if (ldo < TPS65023_LDO_1 || ldo > TPS65023_LDO_2)
- return -EINVAL;
-
- ret = regmap_read(tps->regmap, TPS65023_REG_LDO_CTRL, &data);
- if (ret != 0)
- return ret;
-
- data >>= (TPS65023_LDO_CTRL_LDOx_SHIFT(ldo - TPS65023_LDO_1));
- data &= (tps->info[ldo]->table_len - 1);
- return data;
-}
-
-static int tps65023_ldo_set_voltage_sel(struct regulator_dev *dev,
- unsigned selector)
-{
- struct tps_pmic *tps = rdev_get_drvdata(dev);
- int ldo_index = rdev_get_id(dev) - TPS65023_LDO_1;
-
- return regmap_update_bits(tps->regmap, TPS65023_REG_LDO_CTRL,
- TPS65023_LDO_CTRL_LDOx_MASK(ldo_index),
- selector << TPS65023_LDO_CTRL_LDOx_SHIFT(ldo_index));
-}
-
/* Operations permitted on VDCDCx */
static struct regulator_ops tps65023_dcdc_ops = {
.is_enabled = regulator_is_enabled_regmap,
@@ -242,8 +209,8 @@ static struct regulator_ops tps65023_ldo_ops = {
.is_enabled = regulator_is_enabled_regmap,
.enable = regulator_enable_regmap,
.disable = regulator_disable_regmap,
- .get_voltage_sel = tps65023_ldo_get_voltage_sel,
- .set_voltage_sel = tps65023_ldo_set_voltage_sel,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
.list_voltage = regulator_list_voltage_table,
};
@@ -304,13 +271,21 @@ static int __devinit tps_65023_probe(struct i2c_client *client,
tps->desc[i].owner = THIS_MODULE;
tps->desc[i].enable_reg = TPS65023_REG_REG_CTRL;
- if (i == TPS65023_LDO_1)
+ switch (i) {
+ case TPS65023_LDO_1:
+ tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL;
+ tps->desc[i].vsel_mask = 0x07;
tps->desc[i].enable_mask = 1 << 1;
- else if (i == TPS65023_LDO_2)
+ break;
+ case TPS65023_LDO_2:
+ tps->desc[i].vsel_reg = TPS65023_REG_LDO_CTRL;
+ tps->desc[i].vsel_mask = 0x70;
tps->desc[i].enable_mask = 1 << 2;
- else /* DCDCx */
+ break;
+ default: /* DCDCx */
tps->desc[i].enable_mask =
1 << (TPS65023_NUM_REGULATOR - i);
+ }
config.dev = &client->dev;
config.init_data = init_data;
--
1.7.9.5
next prev parent reply other threads:[~2012-06-19 9:14 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-06-19 9:12 [PATCH RFT 1/3] regulator: tps65023: Convert to regulator_list_voltage_table Axel Lin
2012-06-19 9:13 ` [PATCH RFT 2/3] regulator: tps65023: Convert to get_voltage_sel Axel Lin
2012-06-19 11:08 ` Mark Brown
2012-06-19 9:14 ` Axel Lin [this message]
2012-06-19 11:14 ` [PATCH RFT 3/3] regulator: tps65023: Convert tps65023_ldo_ops to regulator_[get|set]_voltage_sel_regmap Mark Brown
2012-06-19 11:34 ` Mark Brown
2012-06-19 11:08 ` [PATCH RFT 1/3] regulator: tps65023: Convert to regulator_list_voltage_table Mark Brown
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1340097271.28289.4.camel@phoenix \
--to=axel.lin@gmail.com \
--cc=anuj.aggarwal@ti.com \
--cc=broonie@opensource.wolfsonmicro.com \
--cc=linux-kernel@vger.kernel.org \
--cc=lrg@ti.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.