From: "K. Y. Srinivasan" <kys@microsoft.com>
To: gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
devel@linuxdriverproject.org, virtualization@lists.osdl.org,
olaf@aepfle.de, apw@canonical.com
Subject: [PATCH 05/15] Tools: hv: Prepare to expand kvp_get_ip_address() functionality
Date: Sat, 14 Jul 2012 13:34:10 -0700 [thread overview]
Message-ID: <1342298060-12662-5-git-send-email-kys@microsoft.com> (raw)
In-Reply-To: <1342298060-12662-1-git-send-email-kys@microsoft.com>
kvp_get_ip_address() implemented the functionality to retrieve IP address info.
Make this function more generic so that we could retrieve additional
per-interface information.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
---
tools/hv/hv_kvp_daemon.c | 129 ++++++++++++++++++++++++++++++----------------
1 files changed, 84 insertions(+), 45 deletions(-)
diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index ffe444b..3128e77 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -491,7 +491,8 @@ done:
}
static int
-kvp_get_ip_address(int family, char *buffer, int length)
+kvp_get_ip_address(int family, char *if_name, int op,
+ void *out_buffer, int length)
{
struct ifaddrs *ifap;
struct ifaddrs *curp;
@@ -501,10 +502,19 @@ kvp_get_ip_address(int family, char *buffer, int length)
const char *str;
char tmp[50];
int error = 0;
-
+ char *buffer;
+ struct hv_kvp_ipaddr_value *ip_buffer;
+
+ if (op == KVP_OP_ENUMERATE) {
+ buffer = out_buffer;
+ } else {
+ ip_buffer = out_buffer;
+ buffer = (char *)ip_buffer->ip_addr;
+ ip_buffer->addr_family = 0;
+ }
/*
* On entry into this function, the buffer is capable of holding the
- * maximum key value (2048 bytes).
+ * maximum key value.
*/
if (getifaddrs(&ifap)) {
@@ -514,58 +524,87 @@ kvp_get_ip_address(int family, char *buffer, int length)
curp = ifap;
while (curp != NULL) {
- if ((curp->ifa_addr != NULL) &&
- (curp->ifa_addr->sa_family == family)) {
- if (family == AF_INET) {
- struct sockaddr_in *addr =
- (struct sockaddr_in *) curp->ifa_addr;
-
- str = inet_ntop(family, &addr->sin_addr,
- tmp, 50);
- if (str == NULL) {
- strcpy(buffer, "inet_ntop failed\n");
- error = 1;
- goto getaddr_done;
- }
- if (offset == 0)
- strcpy(buffer, tmp);
- else
- strcat(buffer, tmp);
- strcat(buffer, ";");
+ if (curp->ifa_addr == NULL) {
+ curp = curp->ifa_next;
+ continue;
+ }
- offset += strlen(str) + 1;
- if ((length - offset) < (ipv4_len + 1))
- goto getaddr_done;
+ if ((if_name != NULL) &&
+ (strncmp(curp->ifa_name, if_name, strlen(if_name)))) {
+ /*
+ * We want info about a specific interface;
+ * just continue.
+ */
+ curp = curp->ifa_next;
+ continue;
+ }
- } else {
+ /*
+ * We only support two address families: AF_INET and AF_INET6.
+ * If a family value of 0 is specified, we collect both
+ * supported address families; if not we gather info on
+ * the specified address family.
+ */
+ if ((family != 0) && (curp->ifa_addr->sa_family != family)) {
+ curp = curp->ifa_next;
+ continue;
+ }
+ if ((curp->ifa_addr->sa_family != AF_INET) &&
+ (curp->ifa_addr->sa_family != AF_INET6)) {
+ curp = curp->ifa_next;
+ continue;
+ }
+
+ if ((curp->ifa_addr->sa_family == AF_INET) &&
+ ((family == AF_INET) || (family == 0))) {
+ struct sockaddr_in *addr =
+ (struct sockaddr_in *) curp->ifa_addr;
+
+ str = inet_ntop(AF_INET, &addr->sin_addr, tmp, 50);
+ if (str == NULL) {
+ strcpy(buffer, "inet_ntop failed\n");
+ error = 1;
+ goto getaddr_done;
+ }
+ if (offset == 0)
+ strcpy(buffer, tmp);
+ else
+ strcat(buffer, tmp);
+ strcat(buffer, ";");
+
+ offset += strlen(str) + 1;
+ if ((length - offset) < (ipv4_len + 1))
+ goto getaddr_done;
+
+ } else if ((family == AF_INET6) || (family == 0)) {
/*
* We only support AF_INET and AF_INET6
* and the list of addresses is separated by a ";".
*/
- struct sockaddr_in6 *addr =
+ struct sockaddr_in6 *addr =
(struct sockaddr_in6 *) curp->ifa_addr;
- str = inet_ntop(family,
+ str = inet_ntop(AF_INET6,
&addr->sin6_addr.s6_addr,
tmp, 50);
- if (str == NULL) {
- strcpy(buffer, "inet_ntop failed\n");
- error = 1;
- goto getaddr_done;
- }
- if (offset == 0)
- strcpy(buffer, tmp);
- else
- strcat(buffer, tmp);
- strcat(buffer, ";");
- offset += strlen(str) + 1;
- if ((length - offset) < (ipv6_len + 1))
- goto getaddr_done;
-
+ if (str == NULL) {
+ strcpy(buffer, "inet_ntop failed\n");
+ error = 1;
+ goto getaddr_done;
}
+ if (offset == 0)
+ strcpy(buffer, tmp);
+ else
+ strcat(buffer, tmp);
+ strcat(buffer, ";");
+ offset += strlen(str) + 1;
+ if ((length - offset) < (ipv6_len + 1))
+ goto getaddr_done;
}
+
+
curp = curp->ifa_next;
}
@@ -812,13 +851,13 @@ int main(void)
strcpy(key_value, lic_version);
break;
case NetworkAddressIPv4:
- kvp_get_ip_address(AF_INET, key_value,
- HV_KVP_EXCHANGE_MAX_VALUE_SIZE);
+ kvp_get_ip_address(AF_INET, NULL, KVP_OP_ENUMERATE,
+ key_value, HV_KVP_EXCHANGE_MAX_VALUE_SIZE);
strcpy(key_name, "NetworkAddressIPv4");
break;
case NetworkAddressIPv6:
- kvp_get_ip_address(AF_INET6, key_value,
- HV_KVP_EXCHANGE_MAX_VALUE_SIZE);
+ kvp_get_ip_address(AF_INET6, NULL, KVP_OP_ENUMERATE,
+ key_value, HV_KVP_EXCHANGE_MAX_VALUE_SIZE);
strcpy(key_name, "NetworkAddressIPv6");
break;
case OSBuildNumber:
--
1.7.4.1
WARNING: multiple messages have this Message-ID (diff)
From: "K. Y. Srinivasan" <kys@microsoft.com>
To: gregkh@linuxfoundation.org, linux-kernel@vger.kernel.org,
devel@linuxdriverproject.org, virtualization@lists.osdl.org,
olaf@aepfle.de, apw@canonical.com
Cc: "K. Y. Srinivasan" <kys@microsoft.com>
Subject: [PATCH 05/15] Tools: hv: Prepare to expand kvp_get_ip_address() functionality
Date: Sat, 14 Jul 2012 13:34:10 -0700 [thread overview]
Message-ID: <1342298060-12662-5-git-send-email-kys@microsoft.com> (raw)
In-Reply-To: <1342298060-12662-1-git-send-email-kys@microsoft.com>
kvp_get_ip_address() implemented the functionality to retrieve IP address info.
Make this function more generic so that we could retrieve additional
per-interface information.
Signed-off-by: K. Y. Srinivasan <kys@microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@microsoft.com>
---
tools/hv/hv_kvp_daemon.c | 129 ++++++++++++++++++++++++++++++----------------
1 files changed, 84 insertions(+), 45 deletions(-)
diff --git a/tools/hv/hv_kvp_daemon.c b/tools/hv/hv_kvp_daemon.c
index ffe444b..3128e77 100644
--- a/tools/hv/hv_kvp_daemon.c
+++ b/tools/hv/hv_kvp_daemon.c
@@ -491,7 +491,8 @@ done:
}
static int
-kvp_get_ip_address(int family, char *buffer, int length)
+kvp_get_ip_address(int family, char *if_name, int op,
+ void *out_buffer, int length)
{
struct ifaddrs *ifap;
struct ifaddrs *curp;
@@ -501,10 +502,19 @@ kvp_get_ip_address(int family, char *buffer, int length)
const char *str;
char tmp[50];
int error = 0;
-
+ char *buffer;
+ struct hv_kvp_ipaddr_value *ip_buffer;
+
+ if (op == KVP_OP_ENUMERATE) {
+ buffer = out_buffer;
+ } else {
+ ip_buffer = out_buffer;
+ buffer = (char *)ip_buffer->ip_addr;
+ ip_buffer->addr_family = 0;
+ }
/*
* On entry into this function, the buffer is capable of holding the
- * maximum key value (2048 bytes).
+ * maximum key value.
*/
if (getifaddrs(&ifap)) {
@@ -514,58 +524,87 @@ kvp_get_ip_address(int family, char *buffer, int length)
curp = ifap;
while (curp != NULL) {
- if ((curp->ifa_addr != NULL) &&
- (curp->ifa_addr->sa_family == family)) {
- if (family == AF_INET) {
- struct sockaddr_in *addr =
- (struct sockaddr_in *) curp->ifa_addr;
-
- str = inet_ntop(family, &addr->sin_addr,
- tmp, 50);
- if (str == NULL) {
- strcpy(buffer, "inet_ntop failed\n");
- error = 1;
- goto getaddr_done;
- }
- if (offset == 0)
- strcpy(buffer, tmp);
- else
- strcat(buffer, tmp);
- strcat(buffer, ";");
+ if (curp->ifa_addr == NULL) {
+ curp = curp->ifa_next;
+ continue;
+ }
- offset += strlen(str) + 1;
- if ((length - offset) < (ipv4_len + 1))
- goto getaddr_done;
+ if ((if_name != NULL) &&
+ (strncmp(curp->ifa_name, if_name, strlen(if_name)))) {
+ /*
+ * We want info about a specific interface;
+ * just continue.
+ */
+ curp = curp->ifa_next;
+ continue;
+ }
- } else {
+ /*
+ * We only support two address families: AF_INET and AF_INET6.
+ * If a family value of 0 is specified, we collect both
+ * supported address families; if not we gather info on
+ * the specified address family.
+ */
+ if ((family != 0) && (curp->ifa_addr->sa_family != family)) {
+ curp = curp->ifa_next;
+ continue;
+ }
+ if ((curp->ifa_addr->sa_family != AF_INET) &&
+ (curp->ifa_addr->sa_family != AF_INET6)) {
+ curp = curp->ifa_next;
+ continue;
+ }
+
+ if ((curp->ifa_addr->sa_family == AF_INET) &&
+ ((family == AF_INET) || (family == 0))) {
+ struct sockaddr_in *addr =
+ (struct sockaddr_in *) curp->ifa_addr;
+
+ str = inet_ntop(AF_INET, &addr->sin_addr, tmp, 50);
+ if (str == NULL) {
+ strcpy(buffer, "inet_ntop failed\n");
+ error = 1;
+ goto getaddr_done;
+ }
+ if (offset == 0)
+ strcpy(buffer, tmp);
+ else
+ strcat(buffer, tmp);
+ strcat(buffer, ";");
+
+ offset += strlen(str) + 1;
+ if ((length - offset) < (ipv4_len + 1))
+ goto getaddr_done;
+
+ } else if ((family == AF_INET6) || (family == 0)) {
/*
* We only support AF_INET and AF_INET6
* and the list of addresses is separated by a ";".
*/
- struct sockaddr_in6 *addr =
+ struct sockaddr_in6 *addr =
(struct sockaddr_in6 *) curp->ifa_addr;
- str = inet_ntop(family,
+ str = inet_ntop(AF_INET6,
&addr->sin6_addr.s6_addr,
tmp, 50);
- if (str == NULL) {
- strcpy(buffer, "inet_ntop failed\n");
- error = 1;
- goto getaddr_done;
- }
- if (offset == 0)
- strcpy(buffer, tmp);
- else
- strcat(buffer, tmp);
- strcat(buffer, ";");
- offset += strlen(str) + 1;
- if ((length - offset) < (ipv6_len + 1))
- goto getaddr_done;
-
+ if (str == NULL) {
+ strcpy(buffer, "inet_ntop failed\n");
+ error = 1;
+ goto getaddr_done;
}
+ if (offset == 0)
+ strcpy(buffer, tmp);
+ else
+ strcat(buffer, tmp);
+ strcat(buffer, ";");
+ offset += strlen(str) + 1;
+ if ((length - offset) < (ipv6_len + 1))
+ goto getaddr_done;
}
+
+
curp = curp->ifa_next;
}
@@ -812,13 +851,13 @@ int main(void)
strcpy(key_value, lic_version);
break;
case NetworkAddressIPv4:
- kvp_get_ip_address(AF_INET, key_value,
- HV_KVP_EXCHANGE_MAX_VALUE_SIZE);
+ kvp_get_ip_address(AF_INET, NULL, KVP_OP_ENUMERATE,
+ key_value, HV_KVP_EXCHANGE_MAX_VALUE_SIZE);
strcpy(key_name, "NetworkAddressIPv4");
break;
case NetworkAddressIPv6:
- kvp_get_ip_address(AF_INET6, key_value,
- HV_KVP_EXCHANGE_MAX_VALUE_SIZE);
+ kvp_get_ip_address(AF_INET6, NULL, KVP_OP_ENUMERATE,
+ key_value, HV_KVP_EXCHANGE_MAX_VALUE_SIZE);
strcpy(key_name, "NetworkAddressIPv6");
break;
case OSBuildNumber:
--
1.7.4.1
next prev parent reply other threads:[~2012-07-14 20:34 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-14 20:32 [PATCH 00/15] drivers: hv: kvp K. Y. Srinivasan
2012-07-14 20:34 ` [PATCH 01/15] Drivers: hv: Format GUIDS as per MSFT standards K. Y. Srinivasan
2012-07-14 20:24 ` Joe Perches
2012-07-14 23:23 ` KY Srinivasan
2012-07-14 23:23 ` KY Srinivasan
2012-07-14 23:28 ` Joe Perches
2012-07-14 23:28 ` Joe Perches
2012-07-14 20:34 ` [PATCH 02/15] Drivers: hv: Add KVP definitions for IP address injection K. Y. Srinivasan
2012-07-14 20:34 ` K. Y. Srinivasan
2012-07-17 4:09 ` Olaf Hering
2012-07-17 16:05 ` Greg KH
2012-07-17 17:39 ` KY Srinivasan
2012-07-14 20:34 ` [PATCH 03/15] Drivers: hv: kvp: Cleanup error handling in KVP K. Y. Srinivasan
2012-07-14 20:34 ` K. Y. Srinivasan
2012-07-14 20:34 ` [PATCH 04/15] Drivers: hv: kvp: Support the new IP injection messages K. Y. Srinivasan
2012-07-14 20:34 ` K. Y. Srinivasan
2012-07-14 20:34 ` K. Y. Srinivasan [this message]
2012-07-14 20:34 ` [PATCH 05/15] Tools: hv: Prepare to expand kvp_get_ip_address() functionality K. Y. Srinivasan
2012-07-14 20:34 ` [PATCH 06/15] Tools: hv: Further refactor kvp_get_ip_address() K. Y. Srinivasan
2012-07-14 20:34 ` [PATCH 07/15] Tools: hv: Gather address family information K. Y. Srinivasan
2012-07-14 20:34 ` K. Y. Srinivasan
2012-07-14 20:34 ` [PATCH 08/15] Tools: hv: Gather subnet information K. Y. Srinivasan
2012-07-14 20:34 ` K. Y. Srinivasan
2012-07-14 20:34 ` [PATCH 09/15] Tools: hv: Represent the ipv6 mask using CIDR notation K. Y. Srinivasan
2012-07-14 20:34 ` [PATCH 10/15] Tools: hv: Gather ipv[4,6] gateway information K. Y. Srinivasan
2012-07-14 20:34 ` K. Y. Srinivasan
2012-07-14 20:34 ` [PATCH 11/15] Tools: hv: Gather DNS information K. Y. Srinivasan
2012-07-14 20:34 ` K. Y. Srinivasan
2012-07-14 20:34 ` [PATCH 12/15] Tools: hv: Gather DHCP information K. Y. Srinivasan
2012-07-14 21:36 ` richard -rw- weinberger
2012-07-14 23:02 ` KY Srinivasan
2012-07-14 23:02 ` KY Srinivasan
2012-07-14 23:04 ` richard -rw- weinberger
2012-07-14 23:04 ` richard -rw- weinberger
2012-07-14 20:34 ` [PATCH 13/15] Tools: hv: Implement the KVP verb - KVP_OP_SET_IP_INFO K. Y. Srinivasan
2012-07-14 20:34 ` K. Y. Srinivasan
2012-07-14 20:34 ` [PATCH 14/15] Tools: hv: Rename the function kvp_get_ip_address() K. Y. Srinivasan
2012-07-14 20:34 ` [PATCH 15/15] Tools: hv: Implement the KVP verb - KVP_OP_GET_IP_INFO K. Y. Srinivasan
2012-07-17 16:04 ` [PATCH 01/15] Drivers: hv: Format GUIDS as per MSFT standards Greg KH
2012-07-17 16:19 ` Joe Perches
2012-07-17 16:19 ` Joe Perches
2012-07-17 16:32 ` Greg KH
2012-07-17 16:32 ` Greg KH
2012-07-17 17:42 ` KY Srinivasan
2012-07-17 17:42 ` KY Srinivasan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1342298060-12662-5-git-send-email-kys@microsoft.com \
--to=kys@microsoft.com \
--cc=apw@canonical.com \
--cc=devel@linuxdriverproject.org \
--cc=gregkh@linuxfoundation.org \
--cc=linux-kernel@vger.kernel.org \
--cc=olaf@aepfle.de \
--cc=virtualization@lists.osdl.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.